I had a russian stock 4.1.3 firmware on my i9070 with standard samsung recovery and it was kinda buggy(Google Play wouldn't work) and I decided to flash TWRP (yes, I now realize it couldn't have worked since it is for gingerbread) and I got stuck in boot screen with no recovery. The only solution I could think of is to flash stock JB again, so I downloaded stock Romania(Cosmote) Firmware and tried to flash it with both Odin v1.87(with and without pit file) and v3.07 and Odin gave me a PASS each time, but I am still stuck in boot screen with no recovery.
Clearly I am doing something wrong, and it probably is something I should have read somewhere, but there are so many details that I don't know where to start looking...
Later Edit:
It finally booted! Sorry for the new thread.
I don't know why it wasn't working with the Romanian firmware but I used the Greece one and it works fine.
Hi, my friend is facing same problem. Its showing PASS always.
But, its not booting to custom recovery.
It goes to samsung recovey and says "Downloading"
How you got it cleared? Do u need to wait at that previous screen?
aby2aby said:
Hi, my friend is facing same problem. Its showing PASS always.
But, its not booting to custom recovery.
It goes to samsung recovey and says "Downloading"
How you got it cleared? Do u need to wait at that previous screen?
Click to expand...
Click to collapse
If you are flashing custom recovery, but you still have stock Samsung recovery, you are clearly doing something wrong.
When I flashed custom recovery, I had JellyBean Android installed and the recovery was made to work with Gingerbread, so it wouldn't boot recovery at all.
Since you are still getting the standard Samsung recovery, you haven't flashed the custom recovery correctly.
I suggest you retrace your steps and find some tutorial that could help you with your problem HERE.
When I couldn't access recovery, I just flashed stock JellyBean again with Odin.
Related
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Is your phone rooted? Do you have cwm?
Sent from my GT-I9000 using xda app-developers app
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Hmm... Which firmware u flashed?
If my post helped, don't mind hitting THANKS
you have to flash a the JVU. are you sur you didn't flash the JW4 !!
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Firstly I don't think its bricked if you can access download and recovery mode ....
I recently did the following to fix everything wrong with my phone.
I flashed to a stock rom (gingerbread 2.3.3)using Odin, then rooted my phone again. Then I flashed darky's rom (GB 2.3.6). After that i flashed tiramislim 9 (ICS 4.0.4) & that worked out for me. Hope i helped.
Hi guys. I was hoping that maybe some of you genius's maybe be able to help me out? I will try and explain my problem as clearly as possible.
I have an I9305 and an from the UK. I have rooted my phone before and used many custom roms. But quite recently I decide to unroot my phone and go back to a normal stock rom. Last week I got the urge
to root again and install some custom roms. I quickly discovered that since I had OTA my phone that the latest OS has problems (knox) with rooting. I did manage to root my phone. However, the problem started when I tried to install
twrp through Goomanager. I tried to reboot into recovery mode and my phone was stuck on the Galaxy S III splash start screen, and I could not get into recovery mode either. I could still get into download mode. Eventually I did manage
to restore my phone using odin, and install a stock rom for Ireland. After this I tried to install a stock from for the UK, and now my phone is now back to being stuck on the splash screen, and I can not enter recover mode on my phone
using the up/home/power combo, but I can still acces download mode and conect to odin. I have been searching on line for several days for some solutions and fixes, but I seem to be getting no where. So please, if you can help my out and hopefully get my phone back to life I would
be extremely grateful.
If you can boot to download mode, then have you tried to flash a custom recovery with odin? If its twrp you want then flash the twrp tar for i9305 which you can get off the team win website and then see if you can access recovery. If you can, then you should be able to flash a samsung 4.3 rom or cm rom from external sd if you don't have one on your internal or even restore a backup if you have one.
AllianceROM I9305
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
daytimeKnight said:
Thanks for your reply. Yes, I have tried to flash cwm and twrp using odin. They seem to flash fine, but I can not enter recover mode at all. I have also tried to flash some custom roms and they also seem to flash fine, with no errors, but my phone is still stuck on the boot logo. Thanks for any more help.
Click to expand...
Click to collapse
im afraid like me, your stuck on 4.3... download the offical rom and odin it across to your phone, you will not be able to root your phone from now on, your stuck stuck with stock 4.3.. you cant even enter recovery mode thanks to knox.. just the download mode.. like i said in my post "UP YOURS SAMSUNG" IF I EVER SEE YOU IN THE STREET ILL KNOX YOU OUT LOL
relating btuali
Thanks for you replies and help so far. It would be good if I could flash 4.3 through odin, but unfortunately after each successful flash, my phone remains on the sIII logo screen. Maybe there is a specific rom that you guys could recommend that I try? Thanks once again.
Hi there. A big thanks for taking the time to help and give advice. I now finaly have my phone working again. I used Odin 3.7 and the latest official rom, entitled "I9305XXUENA1_I9305SIOENA1_SIO.zip" Odin froze and stalled a few times trying to install but after a few tries it worked. I can now also get back into recovery mode now. So, I was wondering might it be a good idea to do the normal wipes in recovery mode. ie wipe cache, etc. Thanks once again.
Yes keep it clean...
Raistlin1158 said:
Yes keep it clean...
Click to expand...
Click to collapse
Will do.:good:
Ok ,
I tried to extend the lifetime of my Galaxy Note through replacing the official (sloooow) rom with a custom one. I read so many how-to's online that I got confused. Here is what I did:
First I rooted my phone.
Then I installed CWM via RomManager, which did not work. Altough Rommanager shows an installed CWM the phone always start into Stock Recovery.
I learned that the N7000, in order to use CWM needs a flashed kernel.
I flashed the kernel via Heimdall (Mac OS) with this philz_touch_6.48.4-n7000.tar.md5.
The flashing went successfull (according to Heimdall), and the phone rebooted automatically, but all I see since then is the Samsung Logo (Samsung Galaxy Note GT-N7000) and a yellow triangle. From there is goes nowhere. I can enter Download Mode, but is does not boot. Also no Recovery Mode. Weird.
Any advice where to take it from here? Do I have to flash back the original kernel?
Try an older philz. That one you used is to new gor Stock Samsung Rom. What rom is currently installed?
grosserzampano said:
Ok ,
I tried to extend the lifetime of my Galaxy Note through replacing the official (sloooow) rom with a custom one. I read so many how-to's online that I got confused. Here is what I did:
First I rooted my phone.
Then I installed CWM via RomManager, which did not work. Altough Rommanager shows an installed CWM the phone always start into Stock Recovery.
I learned that the N7000, in order to use CWM needs a flashed kernel.
I flashed the kernel via Heimdall (Mac OS) with this philz_touch_6.48.4-n7000.tar.md5.
The flashing went successfull (according to Heimdall), and the phone rebooted automatically, but all I see since then is the Samsung Logo (Samsung Galaxy Note GT-N7000) and a yellow triangle. From there is goes nowhere. I can enter Download Mode, but is does not boot. Also no Recovery Mode. Weird.
Any advice where to take it from here? Do I have to flash back the original kernel?
Click to expand...
Click to collapse
The phone doesn't boot because the kernel you flashed is a kitkat kernel.
You should have recovery mode. Try to remove the battery for couple of seconds and then try to get into recovery. If still no go..
Go to Philz thread and look for tw kernels link. Go there and flash XXLTA kernel using odin. Now try recovery mode again.
User_99 said:
Try an older philz. That one you used is to new gor Stock Samsung Rom. What rom is currently installed?
Click to expand...
Click to collapse
I have the Stock Samsung Android 4.1.2 installed. I'll try it again with an older kernel. Thanks for your help.
nokiamodeln91 said:
The phone doesn't boot because the kernel you flashed is a kitkat kernel.
You should have recovery mode. Try to remove the battery for couple of seconds and then try to get into recovery. If still no go..
Go to Philz thread and look for tw kernels link. Go there and flash XXLTA kernel using odin. Now try recovery mode again.
Click to expand...
Click to collapse
I tried it several times, also after removing the battery. no success. Is is necessary to use ODIN? I use Heimdall as I mentioned, because I am running Mac OS.
I'll try it with a different kernel and report back here about my results. Thanks a lot.
Thanks for your help. I searched through that Philz Thread and found the link to the older kernels. Then I picked this version after asking google for a compatible kernel with N7000 Samsung Rom Android 4.1.2.
Kernel PhilZ-cwm6-XXLTA-ATL-5.15.0
I flashed it with Heimdall and finally the device boots again. Still not able to boot into Clockworkmod. Device does not enter Recovery mode at all. But at least I have a working device for now again.
What
grosserzampano said:
Thanks for your help. I searched through that Philz Thread and found the link to the older kernels. Then I picked this version after asking google for a compatible kernel with N7000 Samsung Rom Android 4.1.2.
Kernel PhilZ-cwm6-XXLTA-ATL-5.15.0
I flashed it with Heimdall and finally the device boots again. Still not able to boot into Clockworkmod. Device does not enter Recovery mode at all. But at least I have a working device for now again.
Click to expand...
Click to collapse
Install terminal emulator and try the command
su
reboot recovery.
Now that is weird. After the device booted again I seemed to lost root access to the device. I tried to get root again with Framaroot, also installed SuperUser again since it was magically deinstalled. Now the device booted into the logo with the yellow triangle and then the screen turned black. Nothing happened from there.
Fortunately I had the idea to use adb on the device before trying to flash an original Samsung Rom back on the device out of pure despair. adb listed the device and stated that the device is in recovery mode. It seems that the device always booted into recovery, altough I tried to boot normally. Recovery still not working. But using "adb reboot" helped to reboot the device again.
Trying to start in recovery mode, i.e. with adb reboot recovery always ends up in a black screen. Somehow this is broken.
I think I have to go back to zero and try to follow a good guide from the beginning without mixing several guides.
grosserzampano said:
Now that is weird. After the device booted again I seemed to lost root access to the device. I tried to get root again with Framaroot, also installed SuperUser again since it was magically deinstalled. Now the device booted into the logo with the yellow triangle and then the screen turned black. Nothing happened from there.
Fortunately I had the idea to use adb on the device before trying to flash an original Samsung Rom back on the device out of pure despair. adb listed the device and stated that the device is in recovery mode. It seems that the device always booted into recovery, altough I tried to boot normally. Recovery still not working. But using "adb reboot" helped to reboot the device again.
Trying to start in recovery mode, i.e. with adb reboot recovery always ends up in a black screen. Somehow this is broken.
I think I have to go back to zero and try to follow a good guide from the beginning without mixing several guides.
Click to expand...
Click to collapse
May be the recovery partition is messed up due to the usage of rom manager earlier. Try to flash a stock rom.
grosserzampano said:
Ok ,
I tried to extend the lifetime of my Galaxy Note through replacing the official (sloooow) rom with a custom one. I read so many how-to's online that I got confused. Here is what I did:
First I rooted my phone.
Then I installed CWM via RomManager, which did not work. Altough Rommanager shows an installed CWM the phone always start into Stock Recovery.
I learned that the N7000, in order to use CWM needs a flashed kernel.
I flashed the kernel via Heimdall (Mac OS) with this philz_touch_6.48.4-n7000.tar.md5.
The flashing went successfull (according to Heimdall), and the phone rebooted automatically, but all I see since then is the Samsung Logo (Samsung Galaxy Note GT-N7000) and a yellow triangle. From there is goes nowhere. I can enter Download Mode, but is does not boot. Also no Recovery Mode. Weird.
Any advice where to take it from here? Do I have to flash back the original kernel?
Click to expand...
Click to collapse
go to download mode and flash stock rom of note 1 via odin then after successful installation u can go to recovery mode and install this zip ur phone will be rooted and phliz touch will be installed
for any help u can PM me
Hi, today after my phone suddenly died without reason, and then my phone just looping on splash screen ( SAMSUNG GALAXY S-III Mini GT-I8190 ). Before I start this thread, I already google it, and I found this and this maybe so many out there with almost same case and zero solution.
Yeah, Stock Recovery and Download Mode still accessable and I already tried:
Wipe Data/Cache on recovery
Flash Stock Firmware using odin, With/without PIT.
Flash Param
Try different odin version.
Flash bunch of different version custom recovery, TWRP and CWM.
Flash CM11 Maclaw using odin.
But my phone still same, nothing changes, even I already flash custom rom, and my Stock Recovery still there.
Flashing with no error, but I have error log in Download Mode, movi_write_card status:2 with red font.
I can't flash anything with that. This is hardware problem? eMMC? If anyone have suggestion would be appreciate, thanks.
Sorry for my english.
the galaxy tab 8.9 is quite aged so i thought that i could pump some newer juice in it. bad luck, it got bricked. stuck at the samsung logo, bootlooping over n over
it started when i tried to install twrp, my current recovery is cwm. currently, i can only boot into download mode. so, i tried flashing back cwm, twrp and even stock recovery but all of it failed. i also tried flashing another stock rom but it also failed. odin didnt even tried, it stucked at "SetupConnection"
can anyone hand out a helping hand?
when i tried to reboot it back now, it asks me to "select recovery from kies" something like that about an error.
?*
bumayang said:
the galaxy tab 8.9 is quite aged so i thought that i could pump some newer juice in it. bad luck, it got bricked. stuck at the samsung logo, bootlooping over n over
it started when i tried to install twrp, my current recovery is cwm. currently, i can only boot into download mode. so, i tried flashing back cwm, twrp and even stock recovery but all of it failed. i also tried flashing another stock rom but it also failed. odin didnt even tried, it stucked at "SetupConnection"
can anyone hand out a helping hand?
Click to expand...
Click to collapse
I have a similar problem. I am waiting for tablet to die (battery dead) then plug into wall charger and it should bring up download mode.
Do you have the LTE model?
droiduzr2 said:
I have a similar problem. I am waiting for tablet to die (battery dead) then plug into wall charger and it should bring up download mode.
Do you have the LTE model?
Click to expand...
Click to collapse
im afraid i dont
Going to necro this because I've had the same problem as the OP (but not 2nd message).
I had CWM 5, tried to flash TWRP (so I could get Nougat), ended up with no recovery bootable. Can anyone help me get back with a recovery?
Tried to flash TWRP 3 but stuck at "failed". The tab was stuck in like 2% status, and wouldn't respond to Odin commands to flash again, so I had to reboot it.
Then there was no recovery I could boot into (icon would just flash when I tried to enter recovery from bootloader menu).
If I don't try to boot into bootloader menu, it sometimes would show the message "Software update failed", but would still accept Odin flashing.
I tried flashing via odin TWRP 2.6, 2.7, 3.0, CWM 5.5, Stock recovery and all did not work. TWRP <=2.7 and CWM would flash OK but still could not enter it, icon would just flash the icon but not change screen.
It doesn't display "Software update failed" screen anymore, but when I try to boot it normally with power button, it will always go into bootloader mode. If I restart with power + vol -, it would go into bootloader menu for you to choose between recovery and bootloader mode.
What should I do next to get a recovery back?
I haven't tried from Odin flashing a full stock image since I can't find a working download link anymore since hotfiles and devhost are down. Does anyone have a .tar or .tar.md5 for Odin flashing they could link me?
Never mind. I managed to find a stock image flashable by odin, flashed that and recovered stock recovery (and a stock ROM). I used the stock recovery to flash TWRP and then used TWRP to flash a new ROM, and all seems to be well now!
pd12 said:
I used the stock recovery to flash TWRP and then used TWRP to flash a new ROM, and all seems to be well now!
Click to expand...
Click to collapse
It is not possible with Stock recovery to flash the TWRP Recovery.
I think your Stock image has an CWM Recovery ( its a modified Stock Recovery ) and it is possible to flash TWRP.
pd12 said:
I managed to find a stock image flashable by odin, flashed that and recovered stock recovery (and a stock ROM).
Click to expand...
Click to collapse
Hi, that's great news! Would you be able to share where you got the ROM from and what version of Odin you used (and where you got it) please?
I am stuck on the boot screen with my GT-P7300. The stock images I have found so far don't flash through Odin and also fail in the recovery.
Many thanks in advance
dertobes