Cyanogenmod 10.1 on HD - Motorola Atrix HD

Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.

Use this for recovery. http://forum.xda-developers.com/showthread.php?t=2421418
Fastboot flash on the computer, then download the latest nighty from get.cm I think. What error? Status code? Those would be nice to help you out more
Sent from my MB886 using xda app-developers app

Don Mike said:
Hello Friends!! im recently bought an Atrix HD and I bought it because i like the model and i saw that is compatible with CM, i was reading about flashing this cell, i unlocked the bootloader and also root the cellphone with the tutorials of this page, but when i tried to install CM from sd something happens and the installation its aborted, i dont know if i have to install also a custom recovery, i download this one http://forum.xda-developers.com/showthread.php?t=2298489 its that a custom recovery? the file that im trying to flash is downloaded from the official page of CM its a RC firmware. im running actually android 4.1 the original of AT&T. hope some one can help me.
Click to expand...
Click to collapse
Maybe what happened to you is that you had flashed a custom recovery, but then in the next reboot the stock recovery was automatically re-flashed.
Try to install custom recovery by Terminal Emulator, then reboot to recovery right after you flashed using command code. I believe you can search for this inside our Atrix HD forum sector.
If you can boot to CWM recovery, there will be a CWM icon instead of an Android bot with its belly opened as in Stock recovery.
Good luck.

Done
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!

Don Mike said:
Ok thanks too much!! just need instal the Recovery, after that the installation of CM run and installation finished as normal!! there is a new version of CM 10.1 stable, it was what I flash it!!
Click to expand...
Click to collapse
please show me clearly about what you did, files you used. I have a problem that cyanogen logo turn around and around and i can't use my phone
thanks
finally i solved problems by myself

Related

[SOLVED][Q][i9000] BootLoop problem after installing CWM

EDIT: Problem solved!
Hi all,
I just tried to install CWM Recovery on a Samsung Galaxy GT-I9000, and it didn't work.
The phone was (originally) running under Android Froyo (2.2), and unrooted. First of all, I used UnlockRoot to root it, and it worked fine. I checked the root access right after using dedicated apps (rootChecker, sdMaid, etc), to confirm.
Then I wanted to install a ClockWorkMod recovery. I followed this guide (on the CyanogenMod wiki). I downloaded and installed Kies to have the USB drivers installed. Then I downloaded Heimdall (my computer is running under Windows 7) + hardcore CMW Kernel. I booted into download mode, then installed the driver. (Step 2 on the tutorial). Then next step was flashing the kernel. It suceeded, and the phone powered off. Turning it on, it just starts to make endless boot loops. The system won't start running, and it is not possible to access to the CWM recovery menu. But the download mode is still available.
So, does anyone have pointers to help me fix this issue ? i would like to have CMW installed, and then install a custom ROM (the latest Jelly Bean based Cyanogenmod release).
Thanks in advance.
Just try again installing stock Rom with odin
See my post Here
http://forum.xda-developers.com/showthread.php?t=1994759
Hi Donovan,
Thanks for the swift answer. And yes, it definitely worked. I downloaded this stock rom, and I flashed it successfully with Odin v3 1.85. I am running now under Android 2.3.6, but I lost the root access. Rooting it won't be a problem, hopefully. I still have access to the download mode, and to the stock recovery. I'll try once again to dive into the ClockWorkMod Recovery, and then install a Jelly Bean rom.
I'm hitting the thanks button right after posting this.
Thanks back at ya. Cf root you can find here
http://forum.xda-developers.com/showthread.php?t=788108
Dont forget the wiping before flashing jb.
Most times u have 2 flash custom twice.
If first time hangs just pull battery out, get in recovery & flash second time or third if its needed.
If it says install completed then its done
Much pleasure flashing the i9000
Actually, I spoke to fast, the problem just got much worse.
Okay, just after flashing the stock rom (2.3.6), everything was fine. Then I downloaded the latest stable CM10 (direct link).
I booted into recovery mode (CWM Recovery,actually) and I did try to install (i din't not forget wiping data/cache, dalvik and batt stats), but it failed, saying the package was incorrect. I tried many times, copying again and again the zip file, same problem.
Then I downloaded a previous version, CM9. I tried to installed it, and i run into a very weird error, saying an assertion failed when trying to install the package.
Something like;
assert failed: getprop("ro.product.device") == "galaxys" || getprop ("ro.build.product") == "galaxys" ... getprop ("ro.build.device") = GT-I9000 etc...
Click to expand...
Click to collapse
And then installation program aborts (error code 7.)
My assumption, is that it looks like my phone is no longer being considered by a samsung gt i9000, according to the installer. Weird, though...
Now, I still have access to the recovery. But the phone can't boot, as everything was wiped. Much worse, I can switch to download mode, but i can't flash back the stock rom, Odin can't detect the phone (I tried with Odin v3 1.82, 1.83 and 1.87).
I'm getting desperate, any pointers ?
Thanks in advance!
Did u try to flash the custom more then 1 time?
Oh yes, I did it like a dozen of times.And I still get the same error.
Sent from my HTC Wildfire S A510e using xda app-developers app
gti9000 rooting
Hi Donovan, could you help me please:fingers-crossed:
I've purchased a unlocked galaxy s gti9000 and I want to root it. Something I've never done on any phone as I'm a complete noob. I managed to install XWJW1 FIRMWARE. I've now got as follows PDA:I9000XWJW6
PHONE: I9000XWJW1
CSC: I9000XSAJV8.
All the links to the file for rooting seem to be dead. I've found some for rooting XXJVU, But that's not right is it? I would really like to try ICS or Jelly Bean. I must admit I'm nervous about this as it's taken me a while to get a phone as good as this one!! Any help would be greatly appreciated. Thanks in advance
@Nooga:There is a very complete and straightforward guide here (http://forum.xda-developers.com/showthread.php?t=1852546). You might want to take a look at it.
Now can we please come back on my topic ? Thanks!
Sent from my HTC Wildfire S A510e using xda app-developers app
Thanks
Roland_Y said:
@Nooga:There is a very complete and straightforward guide here (http://forum.xda-developers.com/showthread.php?t=1852546). You might want to take a look at it.
Now can we please come back on my topic ? Thanks!
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Thanks Roland will give it a try tonight.
Well, that is now solved. I tried something silly that ended up working fine.
As the cm9-smtd update package couldn't run (because of the assertion fail), I just opened the zip package, then edited the file META-INF/com/android/google/updater-script.
I basically removed the assert statement at the top of the file.
CMW recovery installed it properly, without any err. I now have an ICS based rom (Cyanogen Mod 9).
Problem definitely solved now. Going to make a Nandroid backup.
Thanks all, again.

Can't install any CM10 or any zip

So, I have a problem.
I have rooted Optimus 2X and installed CWM- based recovery v6.0.1.5 and I wanted to give CM10 a shot...
But, when I tried to install zip it said installation aborted, so I thought maybe it was the recovery, but when I try to find another recovery in rom manager, it says that my phone isn't on the list...
What should I do?
AW: Can't install any CM10 or any zip
gracoba said:
So, I have a problem.
I have rooted Optimus 2X and installed CWM- based recovery v6.0.1.5 and I wanted to give CM10 a shot...
But, when I tried to install zip it said installation aborted, so I thought maybe it was the recovery, but when I try to find another recovery in rom manager, it says that my phone isn't on the list...
What should I do?
Click to expand...
Click to collapse
i think the problem is not the cwm but the bootloader... you should know there are two one based on GB one based on ICS and you can't install an Rom for new bootloader (ics) on the old bootloader (gb) and vice versa.
mostly in the post it's told if new or old bootloader.
hope that helped hit thanks if did
Sent from my LG-P990 using xda premium
Darkmind82 said:
i think the problem is not the cwm but the bootloader... you should know there are two one based on GB one based on ICS and you can't install an Rom for new bootloader (ics) on the old bootloader (gb) and vice versa.
mostly in the post it's told if new or old bootloader.
hope that helped hit thanks if did
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
oh, so how can i see which one i have?
gracoba said:
oh, so how can i see which one i have?
Click to expand...
Click to collapse
is this the first time installing a rom ?, if so did u root on 2.2 or 2.3 if so u have old bootloader
if u rooted on stock ics from lg u have new bootloader
hope i helped
FettleifIsMyUserName said:
is this the first time installing a rom ?, if so did u root on 2.2 or 2.3 if so u have old bootloader
if u rooted on stock ics from lg u have new bootloader
hope i helped
Click to expand...
Click to collapse
i got this phone with stock 4.0.4 ICS, and was already rooted, so it means i have new bootloader?
and what should i do to make it possible to flash any rom or zip because every time i try i get installation aborts
gracoba said:
i got this phone with stock 4.0.4 ICS, and was already rooted, so it means i have new bootloader?
and what should i do to make it possible to flash any rom or zip because every time i try i get installation aborts
Click to expand...
Click to collapse
yeah that means u got new bootloader what kind of rom do u want to install ?
FettleifIsMyUserName said:
yeah that means u got new bootloader what kind of rom do u want to install ?
Click to expand...
Click to collapse
CyanogenMod 10.1
gracoba said:
CyanogenMod 10.1
Click to expand...
Click to collapse
have u done this ?
this is from pengus77 cm10 rom thread:
If you come from any ICS with unlocked bootloader (Topogigi, Carburano, etc...):
1) grab the recovery zip and the cm10 zip attached to this post (http://forum.xda-developers.com/attachment.php?attachmentid=1602866&d=1356865579)
2) enable debug in developer options (if you haven't already of course)
3) connect the usb cable to your box
4) copy the two zips in your external sd card
5) reboot to recovery by holding power and volume down
5) wipe data/cache, then go to mounts and format system (just to be safe)
6) flash the recovery zip file you previously slapped in the external sd card
7) reboot recovery from the advanced menu
8) flash the cm10 zip as usual
FettleifIsMyUserName said:
have u done this ?
this is from pengus77 cm10 rom thread:
If you come from any ICS with unlocked bootloader (Topogigi, Carburano, etc...):
1) grab the recovery zip and the cm10 zip attached to this post (http://forum.xda-developers.com/attachment.php?attachmentid=1602866&d=1356865579)
2) enable debug in developer options (if you haven't already of course)
3) connect the usb cable to your box
4) copy the two zips in your external sd card
5) reboot to recovery by holding power and volume down
5) wipe data/cache, then go to mounts and format system (just to be safe)
6) flash the recovery zip file you previously slapped in the external sd card
7) reboot recovery from the advanced menu
8) flash the cm10 zip as usual
Click to expand...
Click to collapse
did it, managed to install zip, but now i'm stuck on boot lg logo
gracoba said:
did it, managed to install zip, but now i'm stuck on boot lg logo
Click to expand...
Click to collapse
Not sure your bootloader was locked or not. I suggest, you refer to AIO toolkit thread in dev section and start afresh.
I think his bootloader is locked..also how did u get 6.0.1.5 cwm on ure phone lol?..pengus's recov is the only one that works for new bootloader and the ver is 6.0.2.5:-??
Sent from my LG-P990 using xda premium
Odp: Can't install any CM10 or any zip
gracoba said:
did it, managed to install zip, but now i'm stuck on boot lg logo
Click to expand...
Click to collapse
When changinf from sroxk rims to hihly modified roms, you sbould wipe data partition .
Sent from LG 2X using Tapatalk 3 Beta
Andy HOT said:
I think his bootloader is locked..also how did u get 6.0.1.5 cwm on ure phone lol?..pengus's recov is the only one that works for new bootloader and the ver is 6.0.2.5:-??
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
well, the phone isn't first hand, and when i got it it was already rooted and it had recovery on it, and i didn't check if it's working till now :/
rajdoll said:
Not sure your bootloader was locked or not. I suggest, you refer to AIO toolkit thread in dev section and start afresh.
Click to expand...
Click to collapse
did it all again, installed unlocked bootloader, installed cm10 zip, system reboot, stuck at lg logo again...
gracoba said:
did it all again, installed unlocked bootloader, installed cm10 zip, system reboot, stuck at lg logo again...
Click to expand...
Click to collapse
CM10 for which bootloader? If you are on the ICS bootloader, you cannot install official CM builds. You will have to get Pengus' unofficial build for the new bootloader (which has lots of bugs fixed anyway).
Sent from my LG-P990 using Tapatalk 2
kingvortex said:
CM10 for which bootloader? If you are on the ICS bootloader, you cannot install official CM builds. You will have to get Pengus' unofficial build for the new bootloader (which has lots of bugs fixed anyway).
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
i'm on ICS bootloader and i'm trying to install CM10.1 nightly build... can you link me to Pengus?
gracoba said:
i'm on ICS bootloader and i'm trying to install CM10.1 nightly build... can you link me to Pengus?
Click to expand...
Click to collapse
Firstly, you will probably have to restore your partitions with the AIO tool now you have flashed a zip for the wrong bootloader.
When you have done that, look in the development section for roms for the new bootloader - http://forum.xda-developers.com/forumdisplay.php?f=1002
I recommend tonyp's Paranoid Android- http://forum.xda-developers.com/showthread.php?t=2097807
Or Pengus's CM10 - http://forum.xda-developers.com/showthread.php?t=2058231
There are CM10.1 roms for the new bootloader available as well. Just have a look in the development section
Sent from my LG-P990 using Tapatalk 2
okay, i made it D thanks a lot all of you ^^

[Q] HTC One Sprint. Stuck in Bootloader

Device: HTC One (Sprint)
Hello All, Following the steps here http://forum.xda-developers.com/showthread.php?t=2265618 I managed to..
Successfully unlock the bootloader.
Successfully install Clockwork recovery mod using the 6.0.3.2 Sprint version.
Installed Android HD 12 from clockwork recovery. Install goes off without a hitch. Phone reboots into bootloader over and over again. I can't get out of it if I try to hit POWER DOWN or REBOOT it keeps going back to bootloader. It also will not let me enter Recovery anymore it just goes back to the bootloader screen. I tried fastboot erase cache, which did not do anything.
Please help!?
Fastboot flash a different recovery and then in recovery you can adb push a ROM file to your SD card.
Willieumm said:
Fastboot flash a different recovery and then in recovery you can adb push a ROM file to your SD card.
Click to expand...
Click to collapse
I flashed TWRP and tried installing Android HD again but same thing. Im going to try a different mod perhaps that is the problem?
Maybe try reading the thread. ARHD 12 is not compatible with the sprint One. And don't post in the development section unless you're developing something
Sent from my HTC One using Tapatalk 4
Sprint doesn't have the ability to flash any 4.2.2 ROMs so you need something that's either built from source like cm or aokp or need to find a 4.1.2 ROM.
Willieumm said:
Sprint doesn't have the ability to flash any 4.2.2 ROMs so you need something that's either built from source like cm or aokp or need to find a 4.1.2 ROM.
Click to expand...
Click to collapse
Thanks and sorry for posting this in the wrong area. I was able to adb push and flash CyanogenMod.. I feel like an idiot. Thanks!
jadacyrus said:
Thanks and sorry for posting this in the wrong area. I was able to adb push and flash CyanogenMod.. I feel like an idiot. Thanks!
Click to expand...
Click to collapse
No problem, thanks button is just as good and much faster than saying it.

Cyanogenmod install help

So I installed cyanogenmod following this guide off the wiki: https://wiki.cyanogenmod.org/w/Install_CM_for_z3c and I'm able to reach Cyanogen recovery, but when the guide tells me to install my update packages, I've got no clue where to find these and a reboot results in a bootloop. Could someone guide me in the right direction? Thanks in advance.
Weaklygood2 said:
So I installed cyanogenmod following this guide off the wiki: https://wiki.cyanogenmod.org/w/Install_CM_for_z3c and I'm able to reach Cyanogen recovery, but when the guide tells me to install my update packages, I've got no clue where to find these and a reboot results in a bootloop. Could someone guide me in the right direction? Thanks in advance.
Click to expand...
Click to collapse
Hmm, I tried using Cm before for Z3C. I installed it, coming from a Stock ROM using TWRP. I'm personally not a fan of the CM Recovery as it has Zip Signature Verification turned on permanently so its a real pain. I suggest you install coming from stock using twrp rather than attempting for a dirty flash ( installing custom rom over another custom rom )
Good luck!

Can't install TWRP on my Galaxy S2 I9100. Tried Everything

Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Aly Rezz said:
Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Click to expand...
Click to collapse
Hello,
I will move your thread to the correct section, where experts might be able to assist you.
Regards
Vatsal,
Forum Moderator.
Aly Rezz said:
Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Click to expand...
Click to collapse
Have you tried unchecking the "reboot" option in odin when flashing twrp and then manually power off and boot directly to recovery with 3 buttons combo? Make sure you boot first to twrp rather than android. Tell if it worked
Thanks for ur help guys... but I discovered a method to install TWRP. I flashed the diya kernel recovery in download mode instead of philz... And then I followed all the steps... thanks
Aly Rezz said:
Thanks for ur help guys... but I discovered a method to install TWRP. I flashed the diya kernel recovery in download mode instead of philz... And then I followed all the steps... thanksī¸
Click to expand...
Click to collapse
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Hi, can you tell me where I can find this diya kernel (googled it... in vain) since I'm also struggling to update my i9100 from 4.1.2 to Lineage 7.1 ? Much appreciated
Jacbjacb said:
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Click to expand...
Click to collapse
adiver said:
Hi, can you tell me where I can find this diya kernel (googled it... in vain) since I'm also struggling to update my i9100 from 4.1.2 to Lineage 7.1 ? Much appreciated
Click to expand...
Click to collapse
He probably means "Siyah Kernel", but anyway, have you guys tried this guide?
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Or try this short one i made, with all links needed except for Odin of course
https://forum.xda-developers.com/showpost.php?p=71195098&postcount=5
Guys, those guides are for galaxy s2 i9100 not i9000.
Thank you for your reply. I managed to sort it out thanks to https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Thank you for your reply. I managed to sort it out thanks to https://forum.xda-developers.com/galaxy-s2/help/user-help-to-start-feeling-somewhat-t3561726
Jacbjacb said:
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Click to expand...
Click to collapse
I'm sorry buddy. I meant Siyah kernel ?. I flashed TWRP with that recovery

Categories

Resources