Database Develop

Bluetooth tethering not working since all Nightlys and Stables of CM

Hey Guys
I have a big problem...im using a smartwatch called "im watch" and for full functionality it uses bluetooth tethering to get internet, but every nightly i tryed (using cm10.1 and cm10.2) didnt worked :/ i also tryed other roms and it never worked so i think its a general p880 cm problem or something like that. LG never implemented it in their roms....maybe this is the cause.
With a friends htc one it worked very well !
Maybe you can help me
Im using cm10.2 with iodak v08
Gesendet von meinem LG-P880 mit Tapatalk 2

In was really tempted do get that watch, but unfortunately I dont know know the solution to your problem maybe you should try the Q and A section
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

@DarkFantasy6: Do two things:
1.) Upload your /system/frameworks/framework-res.apk file.
2.) Don't update to a newer nightly before I send you the modified file and try it out. There might be some changes and you could easily end up with a bootloop.

Thank you adam
this is the file from nightly 20130913:

Ok, I've modified the BT tether interface from "bnep\\d" to "bt-pan" which is the standard since 4.2. I cannot test it, so here you are, it's attached. Just overwrite the original one, wipe cache + dalvik-cache. Don't forget to make a backup first.

Thank you very much
Your patch worked very well for me. I created a new nightly.zip an flashed it and the notification "hotspot or tether active" arrived and my smartwatch had internet. So i restored all my apps and restored my settings and now its broken again Oo i flashed the fixed nightly again, but it didnt helped... :/ it never worked again :/
Gesendet von meinem LG-P880 mit Tapatalk 2

Damn it was my mistake its working perfect now , i flashed iodak i think this was the error. With stock cm kernel its working perfect!!
Thank you very much
Do you know why it isnt working with iodsk?
Gesendet von meinem LG-P880 mit Tapatalk 2

It might not work on a newer nightly. There might be changes in frameworks. What does logcat tell about it on iodak?
Sent from my LG-P880

Im still on 13th nightly
I never took a logcat...will try it when im home
Gesendet von meinem LG-P880 mit Tapatalk 2

I flashed werewolf kernel v008b and with it tethering is working , too Oo
Gesendet von meinem LG-P880 mit Tapatalk 2

Adam can u tell how you fixed so that i can experiment a little bit with newer nightlys?
Gesendet von meinem LG-P880 mit Tapatalk 2

DarkFantasy6 said:
Adam can u tell how you fixed so that i can experiment a little bit with newer nightlys?
Gesendet von meinem LG-P880 mit Tapatalk 2
Click to expand...
Click to collapse
I modified a resource in the apk. I'm on mobile right now and don't remember the exact name. It could have been done with an Xposed module as well though.
Sent from my LG-P880

SuperSU 1.65

Hey guys, after searching on xda without finding a answer I've got a question about SuperSU version 1.65.
Under the actual TWRP I am not able to install the SuperSU-zip, it says "unable to read zip". I downloaded it three times from the chainfire-thread to prevent a failure in the file.
Does anyone else have this problem and has probably a solution?
Thanks in advance!
Gesendet von meinem HTC One mit Tapatalk 4

install it via the Play Store

I tried this first, but under Android 4.3 it isn't possible to update the binary from within the app. The only way is to install it via recovery. But as I mentioned this doesn't work for me for an unknown reason.
Gesendet von meinem HTC One mit Tapatalk 4

I can flash it fine from CWM, but when I boot up, SuperSU claims that there is no su binary and that it cannot fix it. I'm running latest stock GE rom.

I think the problem is not SuperSU itself...
I flashed Android Revolution HD 22.0 and the latest firmware. Could this be the problem? I would ask this directly in the ARHD-thread but I can't write in it, because it's a development-thread
Gesendet von meinem HTC One mit Tapatalk 4

Finally I solved it.
The failure was to download the file via the smartphone. Now I downloaded it with my notebook and everything is fine.
Thanks for your suggestions!

[Q]Rooting issue - should I just flash stock recovery?

Hey guys
So I have a HTC One with Android 4.3 and Sense 5.5 OTA - International version and I attempted to root it.
I performed an adb backup
I unlocked the bootloader.
Flashed it with TWRP.
Installed SuperSU 1.65
I then booted my phone and restored my backup. SuperSU app was there. Then I had to reboot my phone and upon reboot it said I have upgraded to 4.3. Then i opened the SuperSU app and I got the message a lot of people have got about having to manually re-root my phone. Then a few hours later I noticed the SuperSU app was missing from my app draw. I then went back into TWRP > install > SuperSU_1.65.zip and installed it again. There is still no SuperSU app and I don't have root access.
Unless anyone can think of a better alternative - I might flash stock recovery and lock the bootloader and just start again. So my question is, should I do that or is there something else that I can try?
Thanks in advanced.

Try using the new SuperSU 1.69 zip file.
Gesendet von meinem HTC One mit Tapatalk

KonstiDee said:
Try using the new SuperSU 1.69 zip file.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Thanks very much - that solved it. Must have just been me using an older version of SuperSU.

robiszzzonked said:
Thanks very much - that solved it. Must have just been me using an older version of SuperSU.
Click to expand...
Click to collapse
No worries.
Gesendet von meinem HTC One mit Tapatalk

KonstiDee said:
No worries.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
SuperSU-v1.75 is out now. I had to flash this one last night to regain root access. I had 1.69 before.

[Q] Help cannot flash any Roms!!!

Guys never experience a problem like this before i need some help, every time i try and flash any rom that isn't stock i just get a status 7 error, trying to flash CM 11 never had a problem before, tried previous cm packages same result, had a look around changed the script and still has the same problems, tried TWRP and CWM using the latest Z1-lockeddualrecover beta 100 and tried flashing from rooted and unrooted stock roms, bootloader is unlocked.
Any help would be very appreciated. c6903

First try to flash an new Recovery
Gesendet von meinem C6903 mit Tapatalk

-Happy Feet- said:
First try to flash an new Recovery
Gesendet von meinem C6903 mit Tapatalk
Click to expand...
Click to collapse
Have done still doesn't work, flashed latest version of CWM, also tried new Kernel, no luck

Check if root is working properly
Sent from my C6903 using xda app-developers app

Perhaps the system partition is not writeable.
Gesendet von meinem C6903 mit Tapatalk

Thing is I've had CM 11 installed before no issues

[Q] Crash when installing/updating framework

Hi, i have a S Galaxy S2 and every time i install/update Xposed it crashes and the app stops working.(This is my first time installing) I've tried recovery installation mode where i flash manually but have only succeeded in getting the latest Xposedbridge.jar and not the app_Process as it crashes when i perform the reboot recovery. Any advice?

So reboot to recovery and flash the zip manually! What's the problem with that?
Gesendet von meinem GT-N7000 mit Tapatalk

JulGer01 said:
So reboot to recovery and flash the zip manually! What's the problem with that?
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
Well if you read, when i perform the reboot it crashes. XposedBridge.Jar appears to be updated as it says Active 54 Bundle 54 however app_process is Active -- and Bundle 58 which i would assume is the result of it not updating/installing.

But you do know, there are other ways to boot into recovery...? Like I said, flash from there!
Gesendet von meinem GT-N7000 mit Tapatalk

JulGer01 said:
But you do know, there are other ways to boot into recovery...? Like I said, flash from there!
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
Oh it see. It worked Sorry im very new to these kind of things. Thanks +1