Database Develop

Sonicwall NetExtender

All, wanted to say thanks for all the helpful posts. I bought a Viewsonic G-Tablet two days ago and I'm well on my way to making this a bad habit.
So... to my question. Has anyone had experience getting the g-tablet with TNT 4.2.5 [haven't picked up 4.3.0 yet] and the SonicWall NetExtender app? I rooted the device prior to trying NetExtender, but it fails with a series of service errors:
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
03-23 08:37:31.495 D/sysHelper( 2183): Check Root Permission: Exit-Value ==> 0
03-23 08:37:36.315 E/NetExtender.nxclient( 2183): Unable to communicate with service - No such file or directory
03-23 08:37:41.005 D/NetExtender.nxclient( 2183): action button clicked
03-23 08:37:41.015 E/NetExtender.nxclient( 2183): Unable to stop backend service - Transport endpoint is not connected
03-23 08:37:54.035 D/sysHelper( 2245): Check Root Permission: Exit-Value ==> 0
03-23 08:37:58.965 E/NetExtender.nxclient( 2245): Unable to communicate with service - No such file or directory
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
03-23 08:41:05.305 D/sysHelper( 1420): Check Root Permission: Exit-Value ==> 0
03-23 08:41:14.945 E/NetExtender.nxclient( 1420): Unable to communicate with service - No such file or directory
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
03-23 22:42:35.224 D/sysHelper( 5824): Check Root Permission: Exit-Value ==> 0
03-23 22:42:41.115 E/NetExtender.nxclient( 5824): Unable to communicate with service - No such file or directory
I'm going to try dropping into a root shell before executing and see if that helps...
any thoughts are greatly appreciated.

Hi evilquim.
I'm getting the same issue with my G-Tab running VEGAN 5.1. I was wondering if you ever figured this out.
If I manage to get it working I'll post here.

Try the Sonicwall Mobile Connect application in the market if you are running Android 4.x

openvpn in gingerdx

Try setting up to connect to my openvpn server on GDX v.19 with the built-in tun interface. Got thru all the initiation but something happens that the connection was dropped. Here's the releveant part of the logcat:
I/openvpn ( 4537): [serverkey] Peer Connection Initiated with *.*.*.*:1194
D/Tethering( 1720): tun0 is not a tetherable iface, ignoring
I/System.out( 4537): THREAD Thread[Thread-13,5,main] TERMINATED
W/Tethering( 1720): attempting to remove unknown iface (tun0), ignoring
I/mtpd ( 4814): Received signal 17
I/mtpd ( 4814): Pppd is terminated (status = 1)
I/mtpd ( 4814): Mtpd is terminated (status = 33)
Anyone knows what's the deal with that TUN module?

I have since installed openvpn-installer and openvpn settings and it works
The same debug output exists as well for tun. The problem is not with that module per se since I have not changed it anyway. It seems that the openvpn binary that comes with GDX is not the same binary that I have gotten from openvpn-installer.
It is probably a bug inherited from CM anyway

Suddenly no wifi in cm9 and even cm10 (after reflash)

Touchpad just trying to turn wifi on without any success. I have no idea what happened. touchpad worked well for months and just lost wifi. when I boot to WebOs - wifi is working well. I tried to clean up cm9 and flash cm10 - same result.
output from catlog:
02-18 11:35:07.449 E/WifiStateMachine(350): Failed to reload STA firmware java.lang.IllegalStateException: command '40 softap fwreload wlan0 STA' failed with '400 40 Softap operation failed (No such device)'
02-18 11:35:07.459 E/WifiStateMachine(350): Unable to change interface settings: java.lang.IllegalStateException: command '42 interface setcfg wlan0 0.0.0.0 0 down' failed with '400 42 Failed to set address (No such device)'
02-18 11:35:18.479 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:19.479 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:20.479 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:21.479 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:22.479 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:22.479 E/WifiStateMachine(350): Failed to setup control channel, restart supplicant
02-18 11:35:27.499 E/WifiStateMachine(350): Failed to reload STA firmware java.lang.IllegalStateException: command '43 softap fwreload wlan0 STA' failed with '400 43 Softap operation failed (No such device)'
02-18 11:35:27.509 E/WifiStateMachine(350): Unable to change interface settings: java.lang.IllegalStateException: command '45 interface setcfg wlan0 0.0.0.0 0 down' failed with '400 45 Failed to set address (No such device)'
02-18 11:35:27.509 E/WifiHW (350): Unable to open connection to supplicant on "wlan0": No such file or directory
02-18 11:35:28.509 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:29.519 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:30.519 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:31.519 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:32.519 E/WifiHW (350): Supplicant not running, cannot connect
02-18 11:35:32.519 E/WifiStateMachine(350): Failed to setup control channel, restart supplicant
netcfg shows all interfaces down except lo.
wifi country is eu (never checked it before) and I can't change it.

You could try this; maybe it's something similar?

bananagranola said:
You could try this; maybe it's something similar?
Click to expand...
Click to collapse
no link?

Well, that's my first brain fart today. Won't be the last. http://forum.xda-developers.com/showthread.php?t=1813200

Thanks, but not. my wifi just stopped working without any updates etc.

My goodness - wrong device, wrong thread. Like I said, not the last. http://forum.xda-developers.com/showthread.php?t=1937109

No, didn't helped. wifi in webos works without any problems too.
I'm looking at dmesg and found:
board sdio wifi disable
mmc1: card 0001 removed
is it wifi card?

Sorry, then that was the limit of what I can help with. Other than a full wipe and reflash I don't know what else to try. Hopefully someone with more knowledge will show up.

More info from dmesg:
<6>[ 443.108696] CMTP-ATH6KL v4.4
<3>[ 443.108715] board_sdio_wifi_enable
<6>[ 443.114565] wifi_power(1) 1.8V sdio: set load
<6>[ 443.119068] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[ 443.126264] wifi_power(1) 3.3V
<6>[ 443.126583] wifi_power(1) 8901_l1 3.3V
<6>[ 443.134761] wifi_power(1) 8058_l19 1.8V
<4>[ 443.135074] wifi_power(1) CHIP_PWD
<4>[ 443.498377] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 443.507770] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 443.511869] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 443.518944] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 443.529203] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
<4>[ 443.529474] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
<4>[ 443.541910] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
<6>[ 443.541961] mmc1: new high speed SDIO card at address 0001
<3>[ 443.598711] ath6kl: bef2fd6c
<3>[ 446.099490] ath6kl: bef2fcfc
<4>[ 446.099507] ath6kl: bef2fcdc
<6>[ 446.114969] ath6kl: bef2fbc4
<6>[ 446.114985] ath6kl: bef2fbc4
<6>[ 446.116982] ath6kl: bef2fbc4
<6>[ 446.119846] ath6kl: bef2fbc4
<6>[ 446.122747] ath6kl: bef2fbc4
<6>[ 446.125644] ath6kl: bef2fbc4
<6>[ 446.128447] ath6kl: bef2fbc4
<6>[ 446.131304] ath6kl: bef2fbc4
<6>[ 446.134207] ath6kl: bef2fbc4
<6>[ 446.137091] ath6kl: bef2fbc4
<6>[ 446.139949] ath6kl: bef2fbc4
<6>[ 446.142802] ath6kl: bef2fbc4
<6>[ 446.145628] ath6kl: bef2fbc4
<6>[ 446.148491] ath6kl: bef2fbc4
<6>[ 446.151356] ath6kl: bef2fbc4
<6>[ 446.154317] ath6kl: bef2fbc4
<6>[ 446.157094] ath6kl: bef2fbc4
<4>[ 446.160235] ath6kl: bef2fc94
<3>[ 446.163154] ath6kl: bef2fe14
<3>[ 446.166015] ath6kl: bef2fe44
<4>[ 446.168669] ath6kl_sdio: probe of mmc1:0001:1 failed with error -5
<6>[ 462.282740] adm_close port_id=0 index 0
<6>[ 478.764935] adm_close port_id=0 index 0
<3>[ 498.557702] board_sdio_wifi_disable
<6>[ 498.564551] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[ 498.685586] mmc1: card 0001 removed

i dont know what cleanup cm9 + 10 means.. delete things?
uninstall?
nandroid restore and still no-go?
maybe rootzwixi knows..
goodluck

amkaos said:
i dont know what cleanup cm9 + 10 means.. delete things?
uninstall?
nandroid restore and still no-go?
maybe rootzwixi knows..
goodluck
Click to expand...
Click to collapse
format cache, sdcard, config and data from clockworkmod and then acmeuninstall. tried 3 times. Now trying to flash cm9.

this sounds impossible maybe ::
sometimes my router will not broadcast wifi but all things connected thru ethernet work fine.. or one wireless device cannot connect but others do or other connex issues..etc..
if i restart modem + router, everything connex just fine..
you didnt really give any detes about if hptp only fails on your network etc..
if you do uninstall then acme3 correctly, there is no way that HPTP wont connect to your network... unless you share some obscure hardware fubar that i never heard of..
GL
i hope you post what the outcome is and how you resolved prob.
your experience will help out someone in future time
btw, i dont wanna rub it in but when you get things going, make a nandroid backup .. make more as you tweak out your tab and safely delete prior backups... saved me many headaches..
GL
EDIT:: i see that you do connect w/ webos.. still its easy to restart router + modem..

So, new wifi driver in the new cm10 build - still no success. It's only internet browser with webos ;(

Epic 4g same thing
crea7or said:
So, new wifi driver in the new cm10 build - still no success. It's only internet browser with webos ;(
Click to expand...
Click to collapse
CM10 for 4 months no wifi issues. Suddenly the other morning wifi won't turn on. Boot to a stock image it is fine. Did you ever find a solution?

RichMichPA said:
CM10 for 4 months no wifi issues. Suddenly the other morning wifi won't turn on. Boot to a stock image it is fine. Did you ever find a solution?
Click to expand...
Click to collapse
stock image?

Multiboot utility
crea7or said:
stock image?
Click to expand...
Click to collapse
I use multi boot which lets you reboot into fc09 to add MSL etc. I just tried 9.1 ics and wifi is working.

Exactly the same problem
As yet, no fix in sight.
Wifi in WebOS is solid. I have managed to spontaneously connect a couple of times after several hours, sometimes days. I've tried reflashing several roms/updates, reformating, clearing cache and dalvik, resetting permissions. Nothing.
As long as I do not reboot, once connected the wifi is solid. My catlog shows exactly the same problems as OPs.
It may be a coincidence, but my problems seemed to begin after switching to airplane mode on a recent trip. Since then I've only managed to get the wifi up 3 times.
In settings under wifi it just says "connecting to wifi" regardless of whether the wifi button is set to "ON" or "OFF"
What bothers me, is the "not found" errors in logcat.
I'm out of ideas. If anyone can suggest a way to nail down the issue, I'm all ears. Thanks in advance!
Code:
07-24 11:37:27.209 E/WifiStateMachine(242): Failed to reload STA firmware java.lang.IllegalStateException: Error communicating to native daemon
07-24 11:37:27.209 W/CommandListener(156): Failed to retrieve HW addr for wlan0 (No such device)
07-24 11:37:27.209 D/CommandListener(156): Setting iface cfg
07-24 11:37:27.209 D/NetworkManagementService(242): rsp <213 00:00:00:00:00:00 0.0.0.0 0 [down]>
07-24 11:37:27.209 D/NetworkManagementService(242): flags <[down]>
07-24 11:37:27.219 E/WifiStateMachine(242): Unable to change interface settings: java.lang.IllegalStateException: Unable to communicate with native daemon to interface setcfg - com.android.server.NativeDaemonConnectorException: Cmd {interface setcfg wlan0 0.0.0.0 0 [down]} failed with code 400 : {Failed to set address (No such device)}
07-24 11:37:27.389 I/wpa_supplicant(6737): rfkill: Cannot open RFKILL control device
07-24 11:37:27.389 E/wpa_supplicant(6737): Could not read interface wlan0 flags: No such device

I'm having the same issue. WiFi works solid on webOs just when I boot into android and try to turn WiFi on, it stays stuck saying “turning on wifi" on cm9 any build and cm10 any build. I uninstalled everything at least 20 times wiped my TP clean on android and webOs(basically factory reset) wiped the cache wiped the delvik cache turned off turn on reinstall android also downloaded WiFi fixer apk and that doesn't help at all either. Everything on webOs works WiFi internet works great. Just when I go into android it stays stuck at turning on WiFi and when I reinstall cm9 or cm10 open up settings this is the only time I can switch the setting to turning on WiFi but everything is in gray with no luck just stuck saying turning on WiFi. Any help would be much appreciated! I hate webOs android is way better!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
I'm having the same issue. WiFi works solid on webOs just when I boot into android and try to turn WiFi on, it stays stuck saying “turning on wifi" on cm9 any build and cm10 any build. I uninstalled everything at least 20 times wiped my TP clean on android and webOs(basically factory reset) wiped the cache wiped the delvik cache turned off turn on reinstall android also downloaded WiFi fixer apk and that doesn't help at all either. Everything on webOs works WiFi internet works great. Just when I go into android it stays stuck at turning on WiFi and when I reinstall cm9 or cm10 open up settings this is the only time I can switch the setting to turning on WiFi but everything is in gray with no luck just stuck saying turning on WiFi. Any help would be much appreciated! I hate webOs android is way better!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
did u try doctore your TP?

[Q] [help]build AOSPA 4+ for mi3 tegra edtion

Hi,everyone! I got into trouble when I tried to build AOSPA 4+ for mi3 tegra endtion.I successfully complied a *.zip,and successfully flash it to my device,but it always show the boot animation can not get into launcher.I have got logcat,but I am a beginner and have no knowledge about JAVA.
There is a part of locat
Code:
--------- beginning of /dev/log/main
E/nvaudio_modem(25458): Failed to get phone service!
W/AudioFlinger(25458): Thread AudioOut_2 cannot connect to the power manager service
E/AudioFlinger(25458): no wake lock to update!
I/r_submix(25458): adev_open(name=audio_hw_if)
I/r_submix(25458): adev_init_check()
I/AudioFlinger(25458): loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 3
I/AudioPolicyService(25458): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
E/memtrack(25457): Couldn't load memtrack module (No such file or directory)
E/android.os.Debug(25457): failed to load memtrack module: -2
I/SamplingProfilerIntegration(25457): Profiling disabled.
I/Zygote (25457): Preloading classes...
D/idmap (25596): error: no read access to /vendor/overlay: No such file or directory
D/TextLayoutCache(25457): Using debug level = 0 - Debug Enabled = 0
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
D/MtpDeviceJNI(25457): register_android_mtp_MtpDevice
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
E/EmojiFactory_jni(25457): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
V/NatController(25456): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController(25456): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController(25456): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController(25456): runCmd(/system/bin/ip route flush cache) res=0
V/NatController(25456): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
I/LibraryLoader(25457): Loading: webviewchromium
E/dalvikvm(25457): dlopen("/system/lib/libwebviewchromium.so") failed: dlopen failed: empty/missing DT_HASH in "libwebviewchromium.so" (built with --hash-style=gnu?)
W/WebViewFactory(25457): error preloading provider
W/WebViewFactory(25457): java.lang.RuntimeException: Cannot load WebView
W/WebViewFactory(25457): at com.android.org.chromium.android_webview.AwBrowserProcess.loadLibrary(AwBrowserProcess.java:31)
W/WebViewFactory(25457): at com.android.webview.chromium.WebViewChromiumFactoryProvider.<init>(WebViewChromiumFactoryProvider.java:87)
W/WebViewFactory(25457): at java.lang.Class.newInstanceImpl(Native Method)
W/WebViewFactory(25457): at java.lang.Class.newInstance(Class.java:1208)
W/WebViewFactory(25457): at android.webkit.WebViewFactory$Preloader.<clinit>(WebViewFactory.java:43)
W/WebViewFactory(25457): at java.lang.Class.classForName(Native Method)
W/WebViewFactory(25457): at java.lang.Class.forName(Class.java:251)
W/WebViewFactory(25457): at java.lang.Class.forName(Class.java:216)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:307)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.preload(ZygoteInit.java:247)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:581)
W/WebViewFactory(25457): at dalvik.system.NativeStart.main(Native Method)
W/WebViewFactory(25457): Caused by: com.android.org.chromium.content.common.ProcessInitException
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadAlreadyLocked(LibraryLoader.java:135)
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadNow(LibraryLoader.java:87)
W/WebViewFactory(25457): at com.android.org.chromium.android_webview.AwBrowserProcess.loadLibrary(AwBrowserProcess.java:29)
W/WebViewFactory(25457): ... 11 more
W/WebViewFactory(25457): Caused by: java.lang.UnsatisfiedLinkError: dlopen failed: empty/missing DT_HASH in "libwebviewchromium.so" (built with --hash-style=gnu?)
W/WebViewFactory(25457): at java.lang.Runtime.loadLibrary(Runtime.java:386)
W/WebViewFactory(25457): at java.lang.System.loadLibrary(System.java:526)
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadAlreadyLocked(LibraryLoader.java:123)
W/WebViewFactory(25457): ... 13 more
V/NatController(25456): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController(25456): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
W/Zygote (25457): Class not found for preloading: java.lang.UnsafeByteSequence
I/System (25457): Loaded time zone names for "" in 35ms (32ms in ICU)
E/Netd (25456): Unable to create netlink socket: Protocol not supported
E/Netd (25456): Unable to open quota2 logging socket
D/MDnsDS (25456): MDnsSdListener::Hander starting up
D/MDnsDS (25456): MDnsSdListener starting to monitor
D/MDnsDS (25456): Going to poll with pollCount 1
I/System (25457): Loaded time zone names for "en_US" in 22ms (18ms in ICU)
I/Zygote (25457): ...preloaded 2777 classes in 775ms.
I/dalvikvm(25457): System server process 25738 has been created
I/Zygote (25457): Accepting command socket connections
D/SensorService(25738): nuSensorService starting...
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
E/Sensors (25738): HAL:could not open trigger name
E/Sensors (25738): HAL:could not open current trigger
I/MPL-storeload(25738): Bytes read = 4340
V/Sensors (25738): HAL:MPL:inv_compass_was_turned_off
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event3
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event3
I/Sensors (25738): path open /dev/input/event2
I/SensorService(25738): Ambient Light Sensor
I/SensorService(25738): Proximity Sensor
I/SensorService(25738): Barometer Sensor
I/SensorService(25738): Temperature Sensor
I/SensorService(25738): Gyroscope Sensor
I/SensorService(25738): Raw Gyroscope Sensor
I/SensorService(25738): Accelerometer Sensor
I/SensorService(25738): Magnetic Field Sensor
I/SensorService(25738): Orientation Sensor
I/SensorService(25738): Rotation Vector Sensor
I/SensorService(25738): Linear Acceleration Sensor
I/SensorService(25738): Gravity Sensor
D/SensorService(25738): Max socket buffer size 1048576
D/SensorService(25738): nuSensorService thread starting...
E/Sensors (25738): HAL:ERR Full data packet was not read
E/Sensors (25738): HAL:ERR Full data packet was not read
I/installd( 201): new connection
I/powerHAL::common(25738): input device id:0 present with name:tegra-kbc
I/powerHAL::common(25738): input device id:1 present with name:atmel-maxtouch
I/powerHAL::common(25738): input device id:2 present with name:bmp180
I/powerHAL::common(25738): input device id:3 present with name:lightsensor
I/powerHAL::common(25738): input device id:4 present with name:proximity
I/powerHAL::common(25738): input device id:5 present with name:compass
I/powerHAL::common(25738): input device id:6 present with name:fsa8108_sw
D/PackageManager(25738): No files in app dir /vendor/overlay
W/ResourceType(25738): Failure getting entry for 0x7f050000 (t=4 e=0) in package 0 (error -75)
W/Resources(25738): Converting to boolean: TypedValue{t=0x3/d=0x1a9a "false" a=2 r=0x7f120876}
W/ResourceType(25738): Failure getting entry for 0x7f0d01bf (t=12 e=447) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f0d01bf (t=12 e=447) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f130310 (t=18 e=784) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f130310 (t=18 e=784) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f1302f3 (t=18 e=755) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f04000f (t=3 e=15) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f04000f (t=3 e=15) in package 0 (error -75)
D/PackageManager(25738): No files in app dir /vendor/app
V/tspdrv (25738): opened device /dev/tspdrv
V/tspdrv (25738): TSPDRV_MAGIC_NUMBER success
V/tspdrv (25738): TSPDRV_GET_NUM_ACTUATORS success, actuators = 1
V/tspdrv (25738): TSPDRV_SET_DEVICE_PARAMETER success
V/tspdrv (25738): timeout_ms: 0
V/tspdrv (25738): TSPDRV_DISABLE_AMP success
E/ConsumerIrService(25738): Can't open consumer IR HW Module, error: -2
W/libsuspend(25738): Error writing 'on' to /sys/power/state: Invalid argument
I/libsuspend(25738): Selected autosleep
I/powerHAL::common(25738): Enabling input device:1
I/powerHAL::common(25738): Enabling input device:2
I/powerHAL::common(25738): Enabling input device:3
I/powerHAL::common(25738): Enabling input device:4
I/powerHAL::common(25738): Enabling input device:5
I/powerHAL::common(25738): Enabling input device:6
I/powerHAL::pisces(25738): average current for last screen off is 206971
D/SurfaceFlinger( 196): Screen acquired, type=0 flinger=0xc0b450
D/SurfaceFlinger( 196): screen was previously acquired
D/EventHub(25738): No input device configuration file found for device 'atmel-maxtouch'.
D/BluetoothManagerService(25738): Loading stored name and address
D/BluetoothManagerService(25738): Stored bluetooth Name=null,Address=null
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event1: Function not implemented
I/EventHub(25738): New device: id=1, fd=135, path='/dev/input/event1', name='atmel-maxtouch', classes=0x15, configuration='', keyLayout='/system/usr/keylayout/atmel-maxtouch.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'tegra-kbc'.
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event0: Function not implemented
I/EventHub(25738): New device: id=2, fd=136, path='/dev/input/event0', name='tegra-kbc', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/tegra-kbc.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'fsa8108_sw'.
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event6: Function not implemented
I/EventHub(25738): New device: id=3, fd=138, path='/dev/input/event6', name='fsa8108_sw', classes=0x81, configuration='', keyLayout='/system/usr/keylayout/fsa8108_sw.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'compass'.
D/EventHub(25738): No input device configuration file found for device 'proximity'.
D/EventHub(25738): No input device configuration file found for device 'lightsensor'.
D/EventHub(25738): No input device configuration file found for device 'bmp180'.
I/InputReader(25738): Device added: id=-1, name='Virtual', sources=0x00000301
I/InputReader(25738): Device added: id=3, name='fsa8108_sw', sources=0x80000101
I/InputReader(25738): Device added: id=2, name='tegra-kbc', sources=0x00000101
I/InputReader(25738): Touch device 'atmel-maxtouch' could not query the properties of its associated display. The device will be inoperable until the display size becomes available.
I/InputReader(25738): Device added: id=1, name='atmel-maxtouch', sources=0x00001103
I/InputReader(25738): Reconfiguring input devices. changes=0x00000004
I/InputReader(25738): Device reconfigured: id=1, name='atmel-maxtouch', size 1080x1920, orientation 0, mode 1, display id 0
I/PackageManager(25738): No secure containers on sdcard
D/WifiController(25738): isAirplaneModeOn = false, isWifiEnabled = false, isScanningAvailable = false
D/BluetoothTethering(25738): startMonitoring: target: Handler (com.android.server.ConnectivityService$NetworkStateTrackerHandler) {41d2e7e0}
D/BluetoothTethering(25738): startMonitoring: mCsHandler: Handler (com.android.server.ConnectivityService$NetworkStateTrackerHandler) {41d2e7e0}
D/BluetoothManagerService(25738): Message: 20
D/BluetoothManagerService(25738): Added callback: [email protected]:true
D/BluetoothManagerService(25738): Message: 30
D/Tethering(25738): Exception adding default nw to upstreamIfaceTypes: java.lang.NullPointerException
I/VolumePanel(25738): changeOverlayStyle : 1
V/nvaudio_hw(25458): nvaudio_dev_set_voice_volume : vol 0.800000
D/nvaudio_hw(25458): send volume to telephony:0.800000
D/nvaudio_modem(25458): Set modem volume to 0.800000
E/nvaudio_modem(25458): Failed to get phone service!
E/SELinux (25738): SELinux: Loaded file_contexts from /file_contexts
D/Atlas (25738): Computing best atlas configuration...
D/Atlas (25738): Running Atlas Worker #1
D/Atlas (25738): Running Atlas Worker #2
D/Atlas (25738): Running Atlas Worker #3
I/com.android.server.ThemeService(25738): Spawned worker thread
I/WindowManager(25738): SAFE MODE not enabled
V/tspdrv (25738): opened device /dev/tspdrv
V/tspdrv (25738): TSPDRV_MAGIC_NUMBER success
V/tspdrv (25738): TSPDRV_GET_NUM_ACTUATORS success, actuators = 1
F/libc (25738): invalid address or address of corrupt block 0xbed47420 passed to dlfree
F/libc (25738): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 25738 (system_server)
I forgot to filter the log ,sorry...
And when I am building,it always showed that: The API version is out of date,use Xlint to recomplie(In fact I am a Chinese and the massage is in Chinese,I translate it you to understand it),but the JDK version is 1.6.0.33,it is suitable to build kitkat,right?
I hope you answer,please.

Need help fixing an issue with magisk and edxposed causing a bootloop in Android 11

I was rooted back on Android 10, and had Edxposed installed, with I believe the sandhook riru hook. I then enrolled in the beta, and flashed the beta rom without the -w using the flash-all.bat thinking I could just patch the boot.img and be right back where I was with root. Nope.
Okay, it was just the beta, I figured, but nope.
Turns out, even with the current Android 11 build installed, patching the boot.img still results in a bootloop.
I've tried many things, except for a data wipe, as I don't want to go to that extreme if there's still a possibility of fixing it.
I've used the image-new.img from tulsadriver, both the one that removes magisk, and the one that puts it into core-only mode. No go. I've built my own using the technique. Still, a no go.
I've tried:
Clearing the data and cache on the Edxposed Manager
Uninstalling Edxposed Manager
Clearing data and cache on Magisk Manager
Uninstalling Magisk Manager
Used all different Magisk Managers available, with all possible option combinations
Used the most recent platform-tools
Flashing back to Android 10, which bootloops even without root unless I do a factory wipe (presumably)
Booting into TWRP, which asks for a password, as it's not designed for Android 11 and doesn't have access to the filesystem.
Probably a fair few other things I've forgotten over time.
Booting with a magisk_patched image, even with the latest magisk canary build, results in a bootloop. During that, I can run adb logcat, and see that magisk is definitely loading, as are riru-core and riru_edxposed, along with all my other modules that I have tried to remove many times.
In logcat, I can see something like this being repeated several times before it finally crashes:
09-11 11:09:07.476 1388 1388 I Riru : Riru v21.3 (36) in zygote
09-11 11:09:07.476 1388 1388 I Riru : config dir is /data/misc/riru
09-11 11:09:07.476 1388 1388 I Riru : system version 11 (api 30, preview_sdk 0)
09-11 11:09:07.476 1379 1379 I adsprpcd: vendor/qcom/proprietary/commonsys-intf/adsprpc/src/fastrpc_apps_user.c:895: remote_handle_open: Successfully opened handle 0x6 for '":;./\geteventfd on domain 0
09-11 11:09:07.478 1388 1388 I Riru : hook installed
09-11 11:09:07.479 1368 1368 I ThermalEngine: vdd_rstr_init: Could not read /sys/module/msm_thermal/vdd_restriction/enabled
09-11 11:09:07.479 1368 1368 E ThermalEngine: Error reading /sys/class/leds/lcd-backlight/max_brightness
09-11 11:09:07.480 1368 1368 E ThermalEngine: open/sys/class/power_supply/battery/system_temp_level failed13
09-11 11:09:07.480 1368 1368 E ThermalEngine: Unable to init battery charging mitigation to 0
09-11 11:09:07.492 1385 1385 W cnd : type=1400 audit(0.0:438): avc: denied { read write } for name="diag" dev="tmpfs" ino=14334 scontext=u:r:cnd:s0 tcontext=ubject_r:diag_device:s0 tclass=chr_file permissive=0
09-11 11:09:07.480 1433 1433 I crash_dump64: obtaining output fd from tombstoned, type: kDebuggerdTombstone
09-11 11:09:07.480 1388 1388 I Riru : module loaded: edxp (api 4)
09-11 11:09:07.480 1388 1388 V Riru : edxp: onModuleLoaded
09-11 11:09:07.480 1137 1137 I tombstoned: received crash request for pid 1386
09-11 11:09:07.480 1388 1388 I EdXposed: onModuleLoaded: welcome to EdXposed!
09-11 11:09:07.480 1388 1388 I EdXposed: Start to install inline hooks
09-11 11:09:07.480 1388 1388 I EdXposed: Using api level 30
09-11 11:09:07.480 1204 1204 I QC2V4l2Driver: [c2.qti.avc.decoder] Device /dev/video32 opened with fd: 6
09-11 11:09:07.480 1433 1433 I crash_dump64: performing dump of process 1386 (target tid = 1386)
09-11 11:09:07.480 1368 1368 I ThermalEngine: sensors_manager_init: Init
09-11 11:09:07.480 1388 1388 I EdXposed: Start to install Riru hook
09-11 11:09:07.481 1368 1445 E ThermalEngine: socket creation success
09-11 11:09:07.482 1433 1433 F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
09-11 11:09:07.482 1433 1433 F DEBUG : Build fingerprint: 'google/coral/coral:11/RP1A.200720.009/6720564:user/release-keys'
09-11 11:09:07.482 1433 1433 F DEBUG : Revision: 'MP1.0'
09-11 11:09:07.482 1433 1433 F DEBUG : ABI: 'arm64'
09-11 11:09:07.483 1433 1433 F DEBUG : Timestamp: 2020-09-11 11:09:07-0400
09-11 11:09:07.483 1433 1433 F DEBUG : pid: 1386, tid: 1386, name: app_process64 >>> /system/bin/app_process64 <<<
09-11 11:09:07.483 1433 1433 F DEBUG : uid: 0
09-11 11:09:07.483 1433 1433 F DEBUG : signal 11 (SIGSEGV), code 2 (SEGV_ACCERR), fault addr 0x7c36446f08
09-11 11:09:07.483 1433 1433 F DEBUG : x0 b4000079d0e4e290 x1 0000000000000101 x2 0000000000000000 x3 0000007c3601ed18
09-11 11:09:07.483 1433 1433 F DEBUG : x4 0000000000000000 x5 0000007c375d41a0 x6 f2a6c031d29dd811 x7 d61f0220f2c00f91
09-11 11:09:07.483 1433 1433 F DEBUG : x8 0000007c36447000 x9 0000000000000031 x10 b4000079d0e4e290 x11 0000000000000000
09-11 11:09:07.483 1433 1433 F DEBUG : x12 00000000000000c4 x13 6420ea00e9057037 x14 0144ffefc238c310 x15 0000000000000001
09-11 11:09:07.483 1433 1433 F DEBUG : x16 0000007c34c67130 x17 0000007c3601eec0 x18 00000079a0e21c50 x19 15f1a23f7ce4c891
09-11 11:09:07.483 1433 1433 F DEBUG : x20 b4000079d0e4e290 x21 b4000079d0e4e290 x22 0000007c3643f000 x23 0000007c3643f000
09-11 11:09:07.483 1433 1433 F DEBUG : x24 00000079a0d66508 x25 0000007c33bfbdc2 x26 0000007c33c17000 x27 b400007b00e4c093
09-11 11:09:07.483 1433 1433 F DEBUG : x28 0000007c33bfbda5 x29 0000007fd45eaca0
09-11 11:09:07.483 1433 1433 F DEBUG : lr 0000007c3601eef8 sp 0000007fd45eac40 pc 0000007c36446f08 pst 0000000000000000
Eventually, the system gets to the point where it gives up, after repeating 956 956 V Riru : zygote64 not started, wait 1s
09-11 11:10:07.471 3279 3279 I netdClient: Skipping libnetd_client init since *we* are netd
09-11 11:10:07.474 3279 3279 I netd : netd 1.0 starting
09-11 11:10:07.475 3278 3278 I EdXposed: Riru hooks installed
09-11 11:10:07.475 3278 3278 W linker : Warning: invalid soinfo version for "/system/lib/libandroid_runtime.so" (assuming inaccessible)
09-11 11:10:07.475 3278 3278 F libc : Fatal signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x3 in tid 3278 (app_process32), pid 3278 (app_process32)
09-11 11:10:07.477 3279 3279 D TetherController: Setting IP forward enable = 0
09-11 11:10:07.480 3279 3279 D FirewallController: Could not read /proc/self/uid_map, max uid defaulting to 4294967294
09-11 11:10:07.495 3290 3290 I crash_dump32: obtaining output fd from tombstoned, type: kDebuggerdTombstone
09-11 11:10:07.495 1137 1137 I tombstoned: received crash request for pid 3278
09-11 11:10:07.495 1137 1137 I tombstoned: enqueueing crash request for pid 3278
09-11 11:10:07.502 3279 3279 I netd : Creating child chains: 10977us
09-11 11:10:07.502 3279 3279 I netd : Setting up OEM hooks: 159us
09-11 11:10:07.503 3279 3279 I netd : Setting up FirewallController hooks: 43us
09-11 11:10:07.506 3279 3279 I netd : Setting up TetherController hooks: 3116us
09-11 11:10:07.509 3279 3279 I netd : Setting up BandwidthController hooks: 3306us
09-11 11:10:07.509 3279 3279 I netd : Setting up IdletimerController hooks: 89us
09-11 11:10:07.514 3279 3279 I netd : Setting up StrictController hooks: 5268us
09-11 11:10:07.515 3279 3279 I ClatdController: 4.9+ kernel and device shipped with Q+ - clat ebpf should work.
09-11 11:10:07.515 3279 3279 I netd : Initializing ClatdController: 218us
09-11 11:10:07.516 3279 3279 I netd : Initializing traffic control: 1642us
09-11 11:10:07.525 3279 3279 I netd : Enabling bandwidth control: 8528us
09-11 11:10:07.527 3279 3279 E Netd : Error adding route 0.0.0.0/0 -> (null) dummy0 to table 1003: File exists
09-11 11:10:07.527 3279 3279 I netd : Initializing RouteController: 1948us
09-11 11:10:07.527 3279 3279 D XfrmController: XfrmController::ipSecAddXfrmInterface, line=1377
09-11 11:10:07.535 3279 3279 D XfrmController: XfrmController::ipSecRemoveTunnelInterface, line=1590
09-11 11:10:07.535 3279 3279 D XfrmController: deviceName=ipsec_test
09-11 11:10:07.576 3279 3279 D XfrmController: Sending Netlink XFRM Message: XFRM_MSG_FLUSHSA
09-11 11:10:07.576 3279 3279 D XfrmController: Sending Netlink XFRM Message: XFRM_MSG_FLUSHPOLICY
09-11 11:10:07.576 3279 3279 I netd : Initializing XfrmController: 49355us
09-11 11:10:07.578 3279 3279 I libnetd_resolv: resolv_init: Initializing resolver
09-11 11:10:07.580 1430 1940 I QC-NETMGR-LIB: onRegistration(): Starting Netd getService thread
09-11 11:10:07.581 1430 3306 I QC-NETMGR-LIB: getServiceImpl(): INetd discovered
09-11 11:10:07.582 1430 3306 I QC-NETMGR-LIB: registerLinkToDeath(): Success registerLinkToDeath!
09-11 11:10:07.582 1430 1940 D QC-NETMGR-LIB: onRegistration(): netd restart detected
09-11 11:10:07.582 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): Looking for Netd service
09-11 11:10:07.582 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): register to create new OEM network
09-11 11:10:07.582 1430 1585 I QC-NETMGR-LIB: registerNetwork(): Attempting createOemNetwork
09-11 11:10:07.584 3282 3282 F DEBUG : backtrace:
09-11 11:10:07.584 3282 3282 F DEBUG : #00 pc 0000000000003f08 [anon:bionic_alloc_small_objects]
09-11 11:10:07.584 3282 3282 F DEBUG : #01 pc 0000000000043ef4 /system/lib64/libriru_edxp.so (BuildId: d98e5c9f8c1d97bd2b77af3c88464576d2f8999c)
09-11 11:10:07.584 3282 3282 F DEBUG : #02 pc 0000000000001020 /apex/com.android.runtime/lib64/bionic/libdl.so (dlopen+12) (BuildId: 0ef8b9fd3ba84892809321b735317a50)
09-11 11:10:07.584 3282 3282 F DEBUG : #03 pc 0000000000043d14 /system/lib64/libriru_edxp.so (BuildId: d98e5c9f8c1d97bd2b77af3c88464576d2f8999c)
09-11 11:10:07.584 3282 3282 F DEBUG : #04 pc 0000000000043740 /system/lib64/libriru_edxp.so (onModuleLoaded+44) (BuildId: d98e5c9f8c1d97bd2b77af3c88464576d2f8999c)
09-11 11:10:07.584 3282 3282 F DEBUG : #05 pc 000000000000933c /system/lib64/libmemtrack.so (BuildId: b057242d5c6d0ff1bc31a9c75ad7318f94273fe0)
09-11 11:10:07.584 3282 3282 F DEBUG : #06 pc 000000000004a0f0 /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__ZL10call_arrayIPFviPPcS1_EEvPKcPT_mbS5_+284) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #07 pc 000000000004a2f0 /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__ZN6soinfo17call_constructorsEv+380) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #08 pc 000000000004a1fc /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__ZN6soinfo17call_constructorsEv+136) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #09 pc 000000000004a1fc /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__ZN6soinfo17call_constructorsEv+136) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #10 pc 0000000000080e04 /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__ZL29__linker_init_post_relocationR19KernelArgumentBlockR6soinfo+4288) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #11 pc 000000000007fd14 /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl___linker_init+568) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 3282 3282 F DEBUG : #12 pc 000000000004cad4 /apex/com.android.runtime/bin/linker64!ld-android.so (offset 0x33000) (__dl__start+4) (BuildId: 3616c064c2d540887bd8b30030a981de)
09-11 11:10:07.584 1430 1585 I QC-NETMGR-LIB: registerNetwork(): command completed!
09-11 11:10:07.584 1430 1585 I QC-NETMGR-LIB: registerNetwork(): createOemNetwork succeeded [packet mark : 0xf0001] [net id : 1] [network handle : 0x1cafed00d]
09-11 11:10:07.584 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): [packet mark : 0xf0001] [network handle : 0x1cafed00d]
09-11 11:10:07.608 3282 3282 E crash_dump64: unable to connect to activity manager: Connection refused
09-11 11:10:07.608 1137 1137 E tombstoned: Tombstone written to: /data/tombstones/tombstone_15
09-11 11:10:07.608 3290 3290 I crash_dump32: performing dump of process 3278 (target tid = 3278)
09-11 11:10:07.613 3290 3290 F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
09-11 11:10:07.613 3290 3290 F DEBUG : Build fingerprint: 'google/coral/coral:11/RP1A.200720.009/6720564:user/release-keys'
09-11 11:10:07.613 3290 3290 F DEBUG : Revision: 'MP1.0'
09-11 11:10:07.613 3290 3290 F DEBUG : ABI: 'arm'
09-11 11:10:07.613 3290 3290 F DEBUG : Timestamp: 2020-09-11 11:10:07-0400
09-11 11:10:07.613 3290 3290 F DEBUG : pid: 3278, tid: 3278, name: app_process32 >>> /system/bin/app_process32 <<<
09-11 11:10:07.613 3290 3290 F DEBUG : uid: 0
09-11 11:10:07.613 3290 3290 F DEBUG : signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x3
09-11 11:10:07.613 3290 3290 F DEBUG : Cause: null pointer dereference
09-11 11:10:07.613 3290 3290 F DEBUG : r0 00000003 r1 00000003 r2 00000000 r3 00000005
09-11 11:10:07.613 3290 3290 F DEBUG : r4 fff461c0 r5 ecc8a37c r6 00000300 r7 ec783790
09-11 11:10:07.613 3290 3290 F DEBUG : r8 00000003 r9 00000000 r10 ecc8a680 r11 ecc8a310
09-11 11:10:07.613 3290 3290 F DEBUG : ip 80000000 sp fff46148 lr ecbfd3f7 pc ecc66eba
09-11 11:10:07.614 3290 3290 F DEBUG : backtrace:
09-11 11:10:07.614 3290 3290 F DEBUG : #00 pc 00083eba /apex/com.android.runtime/bin/linker!ld-android.so (offset 0x1a000) (__dl_strlen_a15+22) (BuildId: b85b8ab66b065f42982eeb67cddcee9c)
09-11 11:10:07.614 3290 3290 F DEBUG : #01 pc 0001a3f3 /apex/com.android.runtime/bin/linker (__dl__ZNSt3__112basic_stringIcNS_11char_traitsIcEENS_9allocatorIcEEEC2IDnEEPKc+18) (BuildId: b85b8ab66b065f42982eeb67cddcee9c)
09-11 11:10:07.647 3290 3290 E crash_dump32: unable to connect to activity manager: Connection refused
09-11 11:10:07.648 1137 1137 E tombstoned: Tombstone written to: /data/tombstones/tombstone_16
09-11 11:10:07.650 1399 1399 W iorapd : Reconnect to package manager service: 11 times
09-11 11:10:07.651 1399 1399 I ServiceManager: Waiting for service 'package_native' on '/dev/binder'...
09-11 11:10:07.670 3314 3314 I flags_health_check: ServerConfigurableFlagsReset reset_mode value: 1
09-11 11:10:07.670 3314 3314 I flags_health_check: ServerConfigurableFlagsReset updatable crashing detected, resetting flags.
09-11 11:10:07.685 3316 3316 I flags_health_check: ServerConfigurableFlagsReset reset_mode value: 1
09-11 11:10:07.685 3316 3316 I flags_health_check: ServerConfigurableFlagsReset updatable crashing detected, resetting flags.
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): Looking for Netd service
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): register to create new OEM network
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: registerNetwork(): Attempting createOemNetwork
09-11 11:10:07.741 1430 1585 E QC-NETMGR-LIB: registerNetwork(): HAL invocation failed!
09-11 11:10:07.741 1430 1585 E QC-NETMGR-LIB: registerNetwork(): Failure in createOemNetwork!
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRegisterNetwork(): [packet mark : 0x0] [network handle : 0x0]
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientAddInterfaceToOemNetwork(): Looking for Netd service
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientAddInterfaceToOemNetwork(): starting command
09-11 11:10:07.741 1430 1585 I QC-NETMGR-LIB: addInterfaceToOemNetwork(): Attempting addInterfaceToOemNetwork
09-11 11:10:07.741 1430 1585 E QC-NETMGR-LIB: addInterfaceToOemNetwork(): HAL invocation failed!
09-11 11:10:07.751 1399 1399 I ServiceManager: Waiting for service 'package_native' on '/dev/binder'...
09-11 11:10:07.759 1430 1940 E QC-NETMGR-LIB: serviceDied(): Netd service died
09-11 11:10:07.851 1399 1399 I ServiceManager: Waiting for service 'package_native' on '/dev/binder'...
09-11 11:10:07.896 640 755 W HidlServiceManagement: Waited one second for [email protected]::ISensorManager/default
09-11 11:10:07.897 589 589 I hwservicemanager: Since [email protected]::ISensorManager/default is not registered, trying to start it as a lazy HAL.
09-11 11:10:07.898 1508 1508 W HidlServiceManagement: Waited one second for [email protected]::ICameraService/default
09-11 11:10:07.898 589 3331 W libc : Unable to set property "ctl.interface_start" to "[email protected]::ISensorManager/default": error code: 0x20
09-11 11:10:07.899 640 755 I HidlServiceManagement: getService: Trying again for [email protected]::ISensorManager/default...
09-11 11:10:07.899 589 589 I hwservicemanager: Since [email protected]::ICameraService/default is not registered, trying to start it as a lazy HAL.
09-11 11:10:07.900 1508 1508 I HidlServiceManagement: getService: Trying again for [email protected]::ICameraService/default...
09-11 11:10:07.900 589 3332 W libc : Unable to set property "ctl.interface_start" to "[email protected]::ICameraService/default": error code: 0x20
09-11 11:10:07.952 1399 1399 I ServiceManager: Waiting for service 'package_native' on '/dev/binder'...
09-11 11:10:08.052 1399 1399 I ServiceManager: Waiting for service 'package_native' on '/dev/binder'...
09-11 11:10:08.104 1354 1373 I PerMgrSrv: QMI service exited
09-11 11:10:08.105 1354 1354 D PerMgrSrv: modem shut down
09-11 11:10:08.105 1354 1354 D PerMgrSrv: modem new state: going off-line
09-11 11:10:08.105 1354 1354 D PerMgrSrv: slpi shut down
09-11 11:10:08.105 1354 1354 D PerMgrSrv: spss shut down
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Shared memory initialised successfully.
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Registering modemst1: 0x4a /boot/modem_fs1
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Registering modemst2: 0x4b /boot/modem_fs2
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Registering fsc: 0xff /boot/modem_fsc
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Registering fsg: 0x58 /boot/modem_fsg
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: 4 GPT partitions found
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Multisim configs: radio: dsds, modem:dsds
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Multisim configs unchanged. Skip
09-11 11:10:08.109 3338 3338 I vendor.rmt_storage: Capset success!
09-11 11:10:08.109 1228 1228 E MSM-irqbalance: Error waiting for fd: -1
09-11 11:10:08.109 1228 1228 E MSM-irqbalance: Failed to sleep for 5 seconds
09-11 11:10:08.109 1228 1228 I MSM-irqbalance: msm-irq_balance End
09-11 11:10:08.109 1464 1464 I cnss-daemon: Caught Signal: 15
09-11 11:10:08.109 1464 1464 I cnss-daemon: nl_loop_terminate called
09-11 11:10:08.109 1464 1464 I cnss-daemon: Error polling sockets
09-11 11:10:08.109 1464 1757 I cnss-daemon: wlfw_service_request: Pthread exiting
09-11 11:10:08.131 588 588 E servicemanager: Could not find android.hardware.light.ILights/default in the VINTF manifest.
09-11 11:10:08.133 956 956 V Riru : zygote64 not started, wait 1s
09-11 11:10:08.134 643 643 E qdlights: write_int failed to open /sys/class/leds/red/brightness, errno = 2
09-11 11:10:08.134 643 643 D qdlights: set_speaker_light_locked mode=0, colorRGB=00000000, onMS=0, offMS=0, rc=-2
09-11 11:10:08.134 643 643 I chatty : uid=1000(system) [email protected] identical 1 line
09-11 11:10:08.134 643 643 D qdlights: set_speaker_light_locked mode=0, colorRGB=00000000, onMS=0, offMS=0, rc=-2
09-11 11:10:08.135 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRemoveInterfaceFromOemNetwork(): Looking for Netd service
09-11 11:10:08.135 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRemoveInterfaceFromOemNetwork(): starting command
09-11 11:10:08.135 1430 1585 E QC-NETMGR-LIB: removeInterfaceFromOemNetwork(): mService is NULL
09-11 11:10:08.140 1491 1491 I update_engine: [INFO:main.cc(71)] A/B Update Engine terminating with exit code 0
09-11 11:10:08.140 1491 1491 I update_engine: [INFO:cleanup_previous_update_action.cc(88)] Stopping/suspending CleanupPreviousUpdateAction
09-11 11:10:08.140 1491 1491 I update_engine: [INFO:action_processor.cc(61)] ActionProcessor: aborted CleanupPreviousUpdateAction
09-11 11:10:08.152 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRemoveInterfaceFromOemNetwork(): Looking for Netd service
09-11 11:10:08.152 1430 1585 I QC-NETMGR-LIB: NetmgrNetdClientRemoveInterfaceFromOemNetwork(): starting command
09-11 11:10:08.152 1430 1585 E QC-NETMGR-LIB: removeInterfaceFromOemNetwork(): mService is NULL
09-11 11:10:08.160 1511 1511 I CHRE : Client 3 disconnected
09-11 11:10:08.168 622 628 E NetlinkListener: recvmsg failed (No buffer space available)
09-11 11:10:08.170 1148 1148 I statsd : StatsService::Terminating
09-11 11:10:08.173 1148 1148 W statsd : statsd terminated on receiving signal 15.
09-11 11:10:08.173 1148 1148 D RefBase : RefBase: Explicit destruction, weak count = 0 (in 0x59214a5d90)
09-11 11:10:08.173 1148 1148 W RefBase : CallStack::getCurrentInternal not linked, returning null
09-11 11:10:08.173 1148 1148 W RefBase : CallStack::logStackInternal not linked
09-11 11:10:08.370 1511 1511 I CHRE : Client 2 disconnected
09-11 11:10:08.371 1511 1511 I CHRE : Client 1 disconnected
09-11 11:10:09.144 956 956 V Riru : zygote64 not started, wait 1s
09-11 11:10:09.362 1248 1248 I vendor.rmt_storage: rmt_storage_connect_cb: clnt_h=0xa conn_h=0xb4000073c402d3d0
09-11 11:10:09.362 1248 1248 I vendor.rmt_storage: rmt_storage_rw_iovec_cb: /boot/modem_fs1: req_h=0xa msg_id=3: R/W request received (wr_count 1)
09-11 11:10:09.362 1248 1248 I vendor.rmt_storage: wakelock acquired: 1, error no: 11
09-11 11:10:09.362 1248 1750 I vendor.rmt_storage: rmt_storage_client_thread: /boot/modem_fs1: Unblock worker thread (th_id: 494791457984)
09-11 11:10:09.387 1248 1750 I vendor.rmt_storage: rmt_storage_client_thread: /boot/modem_fs1: req_h=0xa msg_id=3: Bytes written = 2097152, wr_count 1
09-11 11:10:09.387 1248 1750 I vendor.rmt_storage: rmt_storage_client_thread: /boot/modem_fs1: req_h=0xa msg_id=3: Send response: res=0 err=0, wr_count 1
09-11 11:10:09.387 1248 1750 I vendor.rmt_storage: rmt_storage_client_thread: /boot/modem_fs1: About to block rmt_storage client thread (th_id: 494791457984) wakelock released: 1, error no: 0
09-11 11:10:09.387 1248 1750 I vendor.rmt_storage:
09-11 11:10:09.439 1354 1574 D PerMgrSrv: modem new state: is off-line
09-11 11:10:09.439 1354 1354 D PerMgrSrv: modem turned off
09-11 11:10:09.439 1354 1377 E PerMgrSrv: PM-PROXY-THREAD registered for modem has died
09-11 11:10:09.439 1354 1377 I PerMgrSrv: modem client PM-PROXY-THREAD unvote ignored, shutdown in progress
09-11 11:10:09.439 1354 1377 D PerMgrSrv: modem state: is off-line, remove client PM-PROXY-THREAD
09-11 11:10:09.439 1354 1354 D PerMgrSrv: slpi turned off
09-11 11:10:09.439 1354 1354 D PerMgrSrv: spss turned off
09-11 11:10:09.439 1354 1354 I PerMgrSrv: Peripheral Mananager service exited
09-11 11:10:09.439 1354 1738 E PerMgrSrv: QCRIL registered for modem has died
09-11 11:10:09.440 1354 1738 I PerMgrSrv: modem client QCRIL unvote ignored, shutdown in progress
09-11 11:10:09.440 1354 1738 D PerMgrSrv: modem state: is off-line, remove client QCRIL
09-11 11:10:09.440 1354 1739 E PerMgrSrv: QCRIL registered for modem has died
09-11 11:10:09.440 1354 1739 I PerMgrSrv: modem client QCRIL unvote ignored, shutdown in progress
09-11 11:10:09.440 1354 1739 D PerMgrSrv: modem state: is off-line, remove client QCRIL
09-11 11:10:09.440 1464 1464 D PerMgrLib: cnss-daemon unvoting for modem
09-11 11:10:09.440 1354 1739 D PerMgrSrv: cnss-daemon removing vote for modem
09-11 11:10:09.440 1354 1739 I PerMgrSrv: modem client cnss-daemon unvote ignored, shutdown in progress
09-11 11:10:09.440 1354 1574 E PerMgrSrv: modem timer stop failed: Invalid argument
09-11 11:10:09.440 1464 1464 D PerMgrLib: cnss-daemon unregistering from peripheral manager
09-11 11:10:09.440 1354 1739 I PerMgrSrv: modem client cnss-daemon unvote ignored, shutdown in progress
09-11 11:10:09.440 1354 1739 D PerMgrSrv: cnss-daemon unregistered
09-11 11:10:09.440 1354 1739 D PerMgrSrv: modem state: is off-line, remove client cnss-daemon
09-11 11:10:09.440 1464 1464 E cnss-daemon: pm_release_vote: pm_handle is NULL
09-11 11:10:10.110 1464 1464 E cnss-daemon: terminate: 1Could not terminate loop in 2 seconds! Some bug???
09-11 11:10:10.161 956 956 V Riru : zygote64 not started, wait 1s
There are lots of messages in the logs I don't understand, but I really don't get why, even when I boot into it, using adb wait-for-device shell magisk --remove modules that the modules are still there! I've tried slightly tweaking the overlay.d file when building my own version of tulsadriver's core-only image so that it'll do various things, from using pkill and kill-all on magisk, edxposed, and riru, but nothing succeeds. I've tried using that to remove the magisk modules. Nope. I don't know what I'm doing wrong. I'll include the logcats for both the image-new.img and magisk_patched.img, so anyone who is willing to help can look at it in full.
I would greatly appreciate any help or advice. I would very much so prefer not to wipe, almost to the point of literally waiting until TWRP releases a workable version for Android 11 that I can potentially use.
Thanks for your time!

Give this a try:
https://forum.xda-developers.com/showthread.php?p=83471367
Sent from my Pixel 4 XL using Tapatalk