if someone gave me the steps on how to install rom holoblur when tried to install the rom does not start:crying:
Also I would be happy if I had a 4.1 android rom all that and installed rom always have problems
tufrustracion23 said:
if someone gave me the steps on how to install rom holoblur when tried to install the rom does not start:crying:
Also I would be happy if I had a 4.1 android rom all that and installed rom always have problems
Click to expand...
Click to collapse
First questions:
Is your bootloader unlocked?
Do you have a custom recovery installed? (Safestrap? Clockworkmod?)
If your bootloader is LOCKED, unlock it using Myth Tools.
If your bootloader is UNLOCKED, and you do not have a custom recovery, download Clockworkmod and install it (boot your phone into fastboot mode then shift-click inside the folder you extracted the recovery.img to and click "Open command window here" and type the command posted in the thread).
If your bootloader is LOCKED or UNLOCKED and you have Safestrap installed, boot into SS and delete any ROM slots you have made (do not delete the stock slot), then uninstall the recovery through the app, then uninstall the app itself. Now follow the instructions above to install Clockworkmod.
If your bootloader is UNLOCKED and you have Clockworkmod, boot into CWM and follow the instructions on the ROM's XDA page.
Same problem
Same problem here. My MB886 is definitely unlocked, CWM and recovery are installed. Attempted to install Holoblur v.9 Performance from stock 4.1.1. Followed the directions including a format of /system but it hangs during boot every time. Restored stock rom via CWM, loaded latest CM 10.2 nightly build temporarily but ultimately hope to switch to Holoblur when I have more time to work on it.
bethslave said:
Same problem here. My MB886 is definitely unlocked, CWM and recovery are installed. Attempted to install Holoblur v.9 Performance from stock 4.1.1. Followed the directions including a format of /system but it hangs during boot every time. Restored stock rom via CWM, loaded latest CM 10.2 nightly build temporarily but ultimately hope to switch to Holoblur when I have more time to work on it.
Click to expand...
Click to collapse
I think the Performance version was broken for some people, have you tried the Tuned version?
Just flash tuned version then flash PurePerformance mod over it. Voila. (I got a link in my sig).
Sent from my MB886 using xda app-developers app
What about mounting the system before installing the rom?
I can't get CWM to install...i'm Bootloader Unlocked, rooted and on 4.1.1...every time i flash it, it goes to the "Dead Android" screen when i tell MythTools to go to Recovery.....
Dvdxploitr said:
I can't get CWM to install...i'm Bootloader Unlocked, rooted and on 4.1.1...every time i flash it, it goes to the "Dead Android" screen when i tell MythTools to go to Recovery.....
Click to expand...
Click to collapse
Are you rooted? If you are, use Root Explorer to change the file named install-recovery.sh to recovery.sh.bak and flash CWM via fastboot using the command fastboot flash recovery name-of-recovery.img.
Related
After unlocking the bootloader, how would I flash ClockworkMod Recovery using ROM Manager. I was looking at Cyanogenmod wiki and it says that i would need root access to do it the easy method. Does this mean I need to root it before flashing the recovery or what?
If you haven't unlocked the bootloader, I would use a tool to root like SuperOneClick or rageagainstthecage, then just install ROM Manager (https://market.android.com/details?id=com.koushikdutta.rommanager&feature=search_result) and have it install the recovery.
If you HAVE unlocked the bootloader already, you just need to find a recovery image (like clockworkmod - http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html) and flash it in fastboot using the fastboot flash command.
So after flashing the recovery image, I could use the rom manager to update the recovery image if there is such a update correct?
Sent from my Nexus One using XDA App
ephung23 said:
So after flashing the recovery image, I could use the rom manager to update the recovery image if there is such a update correct?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
If you flash a recovery image, the next step after that is installing a custom ROM. What I was stating was just that there is a way to flash a recovery image without unlocking the bootloader.
Of course, I completely get what you're saying. I already unlocked the bootloader, but after flashing the custom recovery image, would my phone be rooted with superuser and etc?
Sent from my Nexus One using XDA App
Superuser is an application. You gain root accesses to the filesystem by unlocking the bootloader.
So by unlocking the bootloader, I have root then?
Sent from my Nexus One using XDA App
Unlocking the bootloader allows you to flash unofficial (custom) images. You can flash recovery, system, boot images, etc. Unlocking the bootloader does NOT give you root access to the phone. You need to either root your stock image, or since your bootloader is unlocked, you can flash a pre-rooted custom ROM.
You can also flash a custom recovery via fastboot, and use that to install a custom ROM. Note, however, that the stock ROM will restore the stock recovery on re-boot, so you will need to go into recovery immediately after installing, then flash your custom ROM. Custom ROMs don't restore the custom recovery...
Sent from my Nexus One using XDA App
No. You just have a unlocked bootloader.
If you are looking at Cyans wiki I assume you want to install CM. So basically just get the recovery image you want to flash along with the ROM and the gapps. Put the ROM and gapps in the root of the sd card. Put the recovery image in the sdk folder with fastboot. I believe its still in the tools folder. Flash the recovery and reboot into recovery. If you boot the phone normally the stock ROM will replace the custom recovery you just flashed. So once your in the custom recovery you can install the CM ROM and gapps. Before you do that though do a nandroid back up. This way you can always just restore your system to its current state.
Oh! I get it! Thank you for the clarification. So how would I root the stock image?
Sent from my Nexus One using XDA App
http://forum.xda-developers.com/showthread.php?p=8532790#post8532790
Thank you for the link and for sol the help.
Sent from my Nexus One using XDA App
So after rooting the phone and installing the recovery image. Would I have to install the radio in order to flash cyanogenmod 7? Is it completely necessary?
If you have radio 4.06 or higher, you should be OK...
Sent from my Nexus One using XDA App
sorry for beringing it up but I have question:
I unlocked bootloader but I do not want to install custom rom (at least yet) ... any guide or simple explanation how to install and have operating superuser app with root access on unlocked stock (GB) rom? (but to be able to OTA update in future?)
How about reading the Wiki, section "Root", guide for unlocked bootloader?
Or searching the forum for answer to one of the most asked questions?
Anyone know how to root Nexus One 2.3.4? I've done a few search but I can't find a full guide for that.
Thank you. Peace.
Since Gingerbreak doesn't work with 2.3.4(IIRC), what you can do is:
1.
- Downgrade to 2.3.3.
- Use gingerbreak to get root, flash custom recovery.
(If you downgraded to froyo, you can root it with z4root or SuperOneClick)
- Get ChainsDD's Superuser in flash-able .zip file. Copy it to SD card.
- Get 2.3.4 OTA update patch, copy it to SD card. If you don't want to lose custom recovery, open zip file with any archive utility, delete /recovery from zip. It will prevent stock recovery from restoring.
(If you downgraded to froyo and rooted, you need to get all OTA patches for upgrading to 2.3.3 and 2.3.4)
- Boot to recovery, flash (modified) OTA update patch. Don't reboot the device yet.
- Flash Superuser.
If you can use any application that requires root permission, you're done.
2. Unlock bootloader, push custom recovery and Superuser.
3. This requires Android Kitchen.
- Downgrade to 2.3.3 and root, flash custom recovery, same as 1.
- Get 2.3.4 system dump here.
- Use Android Kitchen to make rooted stock 2.3.4 package. When it's done, copy it to SD card.
- Backup all your data before proceed.
- Reboot to recovery, flash the package you made.
- Reboot and check. If nothing's wrong, you will have rooted stock with custom recovery.
Or when you're on 2.3.4, go to fastboot, flash a custom recovery, flash the superuser.zip
illuminarias said:
Or when you're on 2.3.4, go to fastboot, flash a custom recovery, flash the superuser.zip
Click to expand...
Click to collapse
You need to unlock bootloader to do that.
LFact said:
You need to unlock bootloader to do that.
Click to expand...
Click to collapse
unlock bootloader will wipe all data on device.
Hi guys, thank you for the tips.
So the best way is tho unlock the bootloader? I have no issue to do that since my warranty is finished. Doesn't matter whether it wipes out my data. I have few questions:
1. After I unlocked my bootloader, can I update any upcoming firmware OTA in the future? Or I have to flash it via sdcards.
2. I've heard about rebooting will unroot the phone. Is it true?
3. How do I unlock my bootloader?
4. Is changing rom will reset the phone to factory setting? Will my phone get unrooted?
Sorry I'm quite a noob here. Peace! Appreciate any helps.
1. With unlocked bootloader you do what you want.
2. No.
3. Read the wiki or a another guide. Mainly get the needed software onto a computer and run fastboot oem unlock when the phone is in the bootloader.
4. Flashing/updating to any rom that does not have root included you will loose root. With unlocked bootloader that is no issue. Flash custom recovery then flash su = root.
Great! Thanks!! I will search for a guide and unlock my bootloader soon!
I just picked up a nexus one unlocked with 2.3.4 stock. I want to downgrade to 2.2.2 or 2.2.1, root it with super one click, then after I get root go to rom manager and get my recovery and then flash a cyanogenmod rom. Saying all that what is the easiest way to downgrade to 2.2.1 or 2.2.2 ???
Thanks
vinnyjr said:
I just picked up a nexus one unlocked with 2.3.4 stock. I want to downgrade to 2.2.2 or 2.2.1, root it with super one click, then after I get root go to rom manager and get my recovery and then flash a cyanogenmod rom. Saying all that what is the easiest way to downgrade to 2.2.1 or 2.2.2 ???
Thanks
Click to expand...
Click to collapse
Use passimg.zip. However, if it has really unlocked bootloader, all you have to do is use fastboot to flash custom recovery and any custom rom you want without doing so.
I have locked bootloader and have stock 2.3.4 on my nexus one... How to downgrade it to 2.3.3?
william31518 said:
I have locked bootloader and have stock 2.3.4 on my nexus one... How to downgrade it to 2.3.3?
Click to expand...
Click to collapse
Use passimg.zip, though it depends on your main version saved in bootloader. If you can get FRG33 or FRG83 passimg.zip(though I wonder if you can find it...), use that, then (manually) update them until you reach 2.3.3.
Hey peeps I've unlocked my bootloader and rooted it. So far so good. Thanks for all the helps.
cjoshua said:
Hey peeps I've unlocked my bootloader and rooted it. So far so good. Thanks for all the helps.
Click to expand...
Click to collapse
I feel daft; I have unlocked the bootloader but cannot root, how ridiculous is that.. Am on 2.3.4 build GRJ22.
I'm trying to install "Root" (point V) on http://forum.xda-developers.com/showthread.php?t=636795 but cannot enter the recovery, getting "triangled" for ever & ever.
Please help guys..
(P.S. It is 06:30 here and I've just worked the whole night, that doesn't make anything any easier..)
Not sure what the guide says, but:
Download and place this zip on your SD.
http://dl.dropbox.com/u/6408470/su-releases/su-2.3.6.1-ef-signed.zip
When connected in fastboot, type:
fastboot flash recovery name-of-recovery.img
fastboot boot name-of-recovery.img
Then flash the su zip - DONE!
Note:
name-of-recovery.img should be replaced with the actual name of the recovery image you have.
The recovery image needs to be located in the same folder on your PC as fastboot.
If your using mac or linux, fastboot may need to be substituted for fastboot-mac or fastboot-linux, etc.
danger-rat said:
Not sure what the guide says, but:
Download and place this zip on your SD.
http://dl.dropbox.com/u/6408470/su-releases/su-2.3.6.1-ef-signed.zip
When connected in fastboot, type:
fastboot flash recovery name-of-recovery.img
fastboot boot name-of-recovery.img
Then flash the su zip - DONE!
Note:
name-of-recovery.img should be replaced with the actual name of the recovery image you have.
The recovery image needs to be located in the same folder on your PC as fastboot.
If your using mac or linux, fastboot may need to be substituted for fastboot-mac or fastboot-linux, etc.
Click to expand...
Click to collapse
Thanks for the reply!
I think the problem is in that the "recovery-RA-passion-v2.2.1" isn't supporting build GRJ22 yet. Doing the above correctly (I think) but cannot boot into recovery.
You think wrong. Do it EXACTLY as danger said.
albundy2010 said:
You think wrong. Do it EXACTLY as danger said.
Click to expand...
Click to collapse
Woa, easy mate.. Found the problem, I think. There's no SD card in the phone. Would that explain it?
(Need to wait a while now until I can use the girlfriend's..)
SD isn't required to install recovery, but you will need it for the su zip.
What sort of message are you getting when you flash recovery?
danger-rat said:
SD isn't required to install recovery, but you will need it for the su zip.
What sort of message are you getting when you flash recovery?
Click to expand...
Click to collapse
I get OKAY on both "sending" & on "writing" the recovery in fastboot. I just cannot boot into recovery. It gets stuck on the triangle and I have to pull the battery
Hi guys, my friend just bricked his LG Optimus black, by trying to reach recovery mode through Rom manager...
When booting, the security error screen flashes and it turns back off.
I've tried to reach recovery/download mode, by trying several button combinations found on the internet, but none of them seems to work, I get the same security error screen (even when the phone is connected to PC).
Can you guys please help, I have zero experience with this phone
Your friend's phone shows security error because he flashed recovery while he was running a v30x stock rom.
With the update to official ICS, the bootloader changed and if you want to keep stock ICS with recovery you need to flash an unlocked bootloader following this guide http://forum.xda-developers.com/showthread.php?t=2160394.
You could also try using SmartFlash Tool to flash this ROM that already includes a recovery, but, if you flash it, you'll have a gingerbread ROM with an old bootloader and a recovery that can be used to flash CyanogenMod based ROMs.
Lorenzoval said:
Your friend's phone shows security error because he flashed recovery while he was running a v30x stock rom.
With the update to official ICS, the bootloader changed and if you want to keep stock ICS with recovery you need to flash an unlocked bootloader following this guide http://forum.xda-developers.com/showthread.php?t=2160394.
You could also try using SmartFlash Tool to flash this ROM that already includes a recovery, but, if you flash it, you'll have a gingerbread ROM with an old bootloader and a recovery that can be used to flash CyanogenMod based ROMs.
Click to expand...
Click to collapse
Thanks, I finally managed to access Download mode and flash stock firmware, and I also flashed the unlocked bootloader, using the exe file...
But I still have a problem...
I still can't access CWM. When pressing the combination in the post you linked, it just shows me a screen, writing recovery mode, and it does nothing.
Didn't the exe file install CWM?
Is it safe to install it with Smart Flash Tool now?
Can you boot to stock ROM? If yes, is his phone rooted?
Lorenzoval said:
Can you boot to stock ROM? If yes, is his phone rooted?
Click to expand...
Click to collapse
I can boot to stock ROM, and yeah I rooted it with Unlock Root after installing the unlocked bootloader.
Download terminal emulator from play store, download recovery.img from here and place it in the root of his sdcard.
Open terminal emulator, type su, press enter, type dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4 and you should have finished! :highfive:
Hi,
I just got a brand new HTC One 7 (WWE, CID E_11) after my last one died. Im trying to root it and install a custom recovery to install arhd or insertcoin. I used htc one toolkit for this. Everything seemed to work ok, but after booting the installed rom (ARHD or insertcoin) the phone reboots after i see the login screen. I somehow managed to reinstall my phone again yesterday, as it was a complete (soft) brick.
I used this to return to stock:
http://forum.xda-developers.com/showthread.php?t=2759000
Now does anyone know why I get a reboot loop? Does anyone know if i installed this stock rom if I get the normal OTA updates again? And do i need to relock the bootloader for this? I would really like to install stock roms again but I'm a little anxious after yesterday. (I've installed custom roms since the old HD2/HTC desire, and also on my old HTC One M7, never had any problems, I think it has to do with the Hboot).
Hoping to hear from you guys,
best wishes,
Olaf
Agil1ty said:
Hi,
I just got a brand new HTC One 7 (WWE, CID E_11) after my last one died. Im trying to root it and install a custom recovery to install arhd or insertcoin. I used htc one toolkit for this. Everything seemed to work ok, but after booting the installed rom (ARHD or insertcoin) the phone reboots after i see the login screen. I somehow managed to reinstall my phone again yesterday, as it was a complete (soft) brick.
I used this to return to stock:
http://forum.xda-developers.com/showthread.php?t=2759000
Now does anyone know why I get a reboot loop? Does anyone know if i installed this stock rom if I get the normal OTA updates again? And do i need to relock the bootloader for this? I would really like to install stock roms again but I'm a little anxious after yesterday. (I've installed custom roms since the old HD2/HTC desire, and also on my old HTC One M7, never had any problems, I think it has to do with the Hboot).
Hoping to hear from you guys,
best wishes,
Olaf
Click to expand...
Click to collapse
Flash the stock firmware 5.11.401.10! I think your firmware is mismatched.
By flashing the firmware after installing the Rom I might fix the bootloop? Or is the stock firmware necesarry to go back to stock? Sorry bit confused, thanks for your response btw
Sent from my HTC One using XDA Free mobile app
Agil1ty said:
By flashing the firmware after installing the Rom I might fix the bootloop? Or is the stock firmware necesarry to go back to stock? Sorry bit confused, thanks for your response btw
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Flashing the firmware might fix the boot-loop, since you flashed the stock rom! If it does stop the boot-loops, you can re-install TWRP or CWM to get the custom recovery.
Agil1ty said:
By flashing the firmware after installing the Rom I might fix the bootloop? Or is the stock firmware necesarry to go back to stock? Sorry bit confused, thanks for your response btw
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
when using a sense custom rom you need to make sure you use twrp 2.6.3.3 recovery, do not use the toolkits, most of the time they are out of date and not updated, this would explain the bootloops, take the time to learn how to use adb and fastboot, you'll never look back.
nothing to do with the firmware and no need to flash it, if your firmware was knackered, you would have a hard brick.
Seanie280672 said:
when using a sense custom rom you need to make sure you use twrp 2.6.3.3 recovery, do not use the toolkits, most of the time they are out of date and not updated, this would explain the bootloops, take the time to learn how to use adb and fastboot, you'll never look back.
nothing to do with the firmware and no need to flash it, if your firmware was knackered, you would have a hard brick.
Click to expand...
Click to collapse
First of all thanks for the quick response. I know how to use adb and fastboot (at least I think).
If i would (in this order) do the following, would that be correct?:
unlock using htdev
Flash twrp 2.6.3.3 using fastboot command: "fastboot flash recovery recovery.img" (naming twrp 2.6.3.3.img = recovery.img)
reboot bootloader
Flash SuperSU.zip in TWRP
reboot twrp
flash custom rom (ARHD).
The thing is it isn't a normal bootloop (which normally would come with the HTC logo all the time)
It reboots when I try to setup the phone (in the setup menu). Restoring the phone with the link in the OP, ive recoverd my phone, but I would still love to use custom roms again.
Agil1ty said:
First of all thanks for the quick response. I know how to use adb and fastboot (at least I think).
If i would (in this order) do the following, would that be correct?:
unlock using htdev
Flash twrp 2.6.3.3 using fastboot command: "fastboot flash recovery recovery.img" (naming twrp 2.6.3.3.img = recovery.img)
reboot bootloader
Flash SuperSU.zip in TWRP
reboot twrp
flash custom rom (ARHD)
Click to expand...
Click to collapse
unlock using HTC Dev
flash TWRP 2.6.3.3
fastboot erase cache
fastboot reboot-bootloader
enter recovery
no need to flash super user it will be included in the rom you flash
flash custom rom, or stock reset rom, if its not rooted, twrp will ask you if you would like to root upon exit.
Seanie280672 said:
unlock using HTC Dev
flash TWRP 2.6.3.3
fastboot erase cache
fastboot reboot-bootloader
enter recovery
no need to flash super user it will be included in the rom you flash
flash custom rom, or stock reset rom, if its not rooted, twrp will ask you if you would like to root upon exit.
Click to expand...
Click to collapse
It seems that insertcoin had a problem in it's installer:
http://insertcoin-roms.org/category/devices/one_m7/one_sense6/
the changelog says: Fixed SuperSU install (might solve the sudden reboot issue in SetupWizard)
It left me without any rom to install, so i had to sideload ARHD, which it didnt want to install via sideload... The next step I isntalled stock again, which I'm using right now.. but I miss xposed framework and other tweaks too much..
I'm gonna try to unlock it again this afternoon and install insertcoin again, but this time ill make a backup first. Does installing the recovery wipe anything?
Agil1ty said:
It seems that insertcoin had a problem in it's installer:
http://insertcoin-roms.org/category/devices/one_m7/one_sense6/
the changelog says: Fixed SuperSU install (might solve the sudden reboot issue in SetupWizard)
It left me without any rom to install, so i had to sideload ARHD, which it didnt want to install via sideload... The next step I isntalled stock again, which I'm using right now.. but I miss xposed framework and other tweaks too much..
I'm gonna try to unlock it again this afternoon and install insertcoin again, but this time ill make a backup first. Does installing the recovery wipe anything?
Click to expand...
Click to collapse
no it doesn't wipe anything, but you can use xposed and its tweaks on stock rom, you just need to root first, just install TWRP, enter recovery and again upon exit it will offer to root stock rom for you.
First of all sorry for my English...
Yesterday I was trying to install vanir room to my p880 after 10 hours I rooted the phone and unlock the bootloader then installed cwm but after reboot I get stuck on logo so I used kdz and load LGP880AT-00-V20a-262-000-MAR-26-2013+0 with (after 4 hours ) then i try using twrp and finally load the room (vanir_p880_4.4.4.112414.zip) and Gapps after rebooting I started getting crashes ( aosp keyboard, com.google, home and back buttons etc didn't work)
so again kdz then i try other room Paranoid but the same thing..
What I'm doing wrong? I used factory reset, wipe etc but same results
what gapps you flashed?
blansh heretics
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
G0ll0 said:
The ones that are here http://forum.xda-developers.com/showthread.php?t=2439739
But I load another rom without gapps and got same errors, wizard stopped, com.Google stopped. And keyboard.
Click to expand...
Click to collapse
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
LGaljo said:
I don't really know what happened, did you successfully flashed kdz?
Where did you get it from? Here?: http://lg-phone-firmware.com/index.php?id_mod=15
Try to flash one of these (choose correct one for you)
Than you have to install recovery again.
But before that you can try to wipe /system, /data, /cache and then flash CM11 (I know it works without problems)
And I recommend you these Gapps: http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
G0ll0 said:
well... yes i think I flashed kdz (LGFlashTool ?) I used kdz to recover my phone to original, I know my phone is Korean version and right now I use P88020A-EUR-XXX original firmware installed with kdz
What is CM11? and how i flash it?
so I have to root and unlock bootloader again and use twrp again right?
Click to expand...
Click to collapse
I think you should try with CWM first, get it: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img
you can flash it with this app if you are rooted: https://play.google.com/store/apps/details?id=com.cgollner.flashify
then you can download CM11 from here: http://download.cyanogenmod.org/?device=p880
and gapps from last mine post
and then boot to recovery, do factory reset and wipe /system, then flash rom and gapps.
Hope it helps
Crash After Flash OTA Vanir 5.0
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
BermiePT said:
I had a similar experience. I was installing OTA latest update of Vanir...not realising that it was 5.0...a screen came up telling me that it needed to flash another recovery...not realising why it needed that, I ignored the request to flash. Of course, I then "bricked" the phone. I was able to install the original JB 4.12 (v20c) back onto the phone but now it won't root. I've tried almost every method in this forum to no avail.:
ADB just gives a message "error: closing" when I use the boot.exe method
o4xr method does nothing
all-in-one method also does nothing
ADB does recognise the device. Drivers are installed. Any help is welcome!
Click to expand...
Click to collapse
Have you tried to flash a recovery using fastboot? You won't need to root (if you are going to use a custom ROM) and/or it will be easier with a custom recovery
Soft brick after last update.
Hello,
I seem to have a similar problem. I updated a few days ago using Vanir updater. There were no warnings re updating the recovery, just a warning regarding losing root. I checked restore root. The phone rebooted to the bootloader logo, then to a black screen. Now, I can access Cyanogen recovery, SW update mode, abd fastboot mode using buttons and the recovery options. ADB can see the phone only in recovery mode, but not in fastboot or SW update mode. CM recovery has no option to mount USB storage, so my PC cannot see the phone, and I cannot side load a new recovery and flash a new ROM.
Is there any way to use ADB if it cannot see your phone in fastboot or SW mode? Perhaps modify the settings.secure string to enable ADB? ADB can see the phone in recovery mode.
Otherwise I will try flashing a stock ROM via KDZ or LG firmware update tool, the re-root and proceed - but rooting was a major ordeal the first time, so I would like to avoid doing that again.
Thanks in advance.