hi
i installed ZenceFil v18 on my x8 with stock kernel but my phone now is always laggy and not smooth.
is this a problem of rom or i should do something.
i used cpu master to remove any limitation for cpu frequency but my phone is still laggy and very slow and is not smooth.
khatarat said:
hi
i installed ZenceFil v18 on my x8 with stock kernel but my phone now is always laggy and not smooth.
is this a problem of rom or i should do something.
i used cpu master to remove any limitation for cpu frequency but my phone is still laggy and very slow and is not smooth.
Click to expand...
Click to collapse
Zencefil on stock lags coz of the default theme and launcher...try GingerDX for stock kernel...u wont be disappointed...it has all the features and works really well on Stock kernel.....
killerassassin said:
Zencefil on stock lags coz of the default theme and launcher...try GingerDX for stock kernel...u wont be disappointed...it has all the features and works really well on Stock kernel.....
Click to expand...
Click to collapse
i used gingerdx before installing zencifil but its has very battery drain.
is there any way to solve zencifil lags?
khatarat said:
i used gingerdx before installing zencifil but its has very battery drain.
is there any way to solve zencifil lags?
Click to expand...
Click to collapse
Haven't tried that rom, but if the person above you is correct then try a different theme and launcher. Deleting unneeded system apps may also help.
khatarat said:
i used gingerdx before installing zencifil but its has very battery drain.
is there any way to solve zencifil lags?
Click to expand...
Click to collapse
GingerDX may have caused battery drain...either because of ultra brightness, WIFI and bluetooth remaining on....Try reinstalling kernel and reflash GDX...i think that should solve the battery drain...Zencefil has less lags on custom kernel...thats my opinion...
Related
Hi,
Any one please help me..
Am using herodroid Rom.
But the problem is Some time its taking too much rom memory and dead slow.
What can i do for improve My mobile performance?
Please help me..! Am new here.
use newer rom like gingerDX
Sent from my e15i | nAa11 |
vanillaLVL said:
use newer rom like gingerDX
Sent from my e15i | nAa11 |
Click to expand...
Click to collapse
+1,
Or MiniCM7 2.2 and Tweak it with v6 Supercharge
Flash another ROM such as cm7.2, ginger DX, ginger Jv etc and overclock with cpu tuner.....729 is optimum CPU frequency.....
Xperian using xda app
I was using the same rom some days back and it was quite laggy
that was really annoying .....
I searched for a fast rom and got a rom which is truly fast and stable
http://forum.xda-developers.com/showthread.php?t=1542247
you will need alfs 08 cm7 kernel for it
i reccomend you using this kernel as it is really good
Here is the link for the kernel-http://forum.xda-developers.com/showthread.php?t=1340861
Download the alfs 8 kernel for cm7 only
after your done with flashing the kernel and rom and once your mobile has booted
Go in setting and click on CyanogenMod settings ..scroll down and you will find performance click on that and go to cpu settings
Change the governer to - SMARTASSV2
Change Max frequency to - 748 MHZ (not more than that your mobile will brick or crash)
Change Min frequency to-729 MHZ
and select the option set on boot
THATS IT UR DONE
Im not responsible if your mobile bricks to death or if it explodes
LOL
Nice tut..
can you tell me why the hell your min frequency is so high???
Ginger DX???????
Before I used gingerdx ..But my battery is draining quickly..SO how can i use that?
And What is the minimum and maximum CPU frequency?
chitrang said:
Change Min frequency to-729 MHZ
Click to expand...
Click to collapse
Oh My...... This WIll make Battery Hunger your Bread
Exactly it will Drain your battery like hell
But Perfomance pretty good
Shimizux said:
Oh My...... This WIll make Battery Hunger your Bread
Exactly it will Drain your battery like hell
But Perfomance pretty good
Click to expand...
Click to collapse
nooooo i got nooo issues with my x8 battery after overclocking
my x8 does work for 17 hours after fulll charge
chitrang said:
nooooo i got nooo issues with my x8 battery after overclocking
my x8 does work for 17 hours after fulll charge
Click to expand...
Click to collapse
Pretty nice Mate !
Im on 122-691Mhz Cool enough,
24Hr ++ After Full Charge
move less, applications to the sd card
U need to download 2 things from the playstore to make your phone faster : 1. Ram manager, 2. Android booster.
Your phone should be a lot faster!
Hit thanks if I helped
Sent from my E15i using XDA
Tell any one..??
One of the best rom like good performance and working all features..More memory and smooth and stable..Because am getting confused here,, i saw many roms.and i also want good battery performance..Please help me..
Ugh didn't mean to give you thanks -.-
Sent from my E15i using xda premium
silvergiri said:
One of the best rom like good performance and working all features..More memory and smooth and stable..Because am getting confused here,, i saw many roms.and i also want good battery performance..Please help me..
Click to expand...
Click to collapse
if u use stock kernel then go for PrimeHD v6.0 or GingerDX v25 ( its drains battery though but is super smooth )
try Gingerxperia, altough the developmment has been stopped
im gdx user but i must say that GX has less battery consumption
manishmalhotra said:
if u use stock kernel then go for PrimeHD v6.0 or GingerDX v25 ( its drains battery though but is super smooth )
Click to expand...
Click to collapse
both have better batery and especially primehd(i would say double as stock rom)
Hi everyone,
I was using GingerDX for 2 months on stock kernel, and it was really slow. Apps launched slowly (took 3-4 seconds at least), when i pulled down the statusbar it was very laggy, animations were laggy etc. I had only 40-50 MB free RAM even when i closed every running apps and unnecessary services, and it restarted the launcher everytime i pressed the home button. So the whole ROM was very slow (I even overclocked it to 710 MHz).
Yesterday I installed the stock 2.1 ROM and it is freaking smooth compared to GDX, no lag, launcher doesn't restart, I have around 80 MB free RAM when nothing is running, and it goes down to 50 MB when i run 3 foreground apps and more background apps at the same time, and touch is way more responsible. I didn't even overclock it.
I haven't tried any other custom ROM. Is GingerDX really that slow? I don't believe, because it is very popular. So what is the reason it runs way slower than 2.1? Maybe because I have stock kernel? I really want to use this ROM since it has so many features.
Hi Lajbymester ,
Welcome to the community.
Please take some time to Introduce Yourself and read FORUM RULES.
Hope you enjoy your stay here, and help others in the future.
I beg to disagree. GDX is popular because it is a very good ROM. Please do try fullwipe, then flash the ROM as instructed in GDX first page.
Thanks for the welcome
I have already full wiped and reinstalled the ROM about 5 times, used all versions from v021 and it didn't get any smoother.
Lajbymester said:
Thanks for the welcome
I have already full wiped and reinstalled the ROM about 5 times, used all versions from v021 and it didn't get any smoother.
Click to expand...
Click to collapse
Hi,
For now, I´ll just ask you to give us some more information. Could you post what do you use on your phone?? Even in stock kernel I´ve never felt laggy on GingerDX.
With fresh install, what did you change? Undervolt? OC? I remember that ppl had issues on Stock Kernel and GingerDX running with OC module from doixahn. Try to see if the Rom you are using is undervolted or not.
Will you try it on Custom Kernel?
BTW, which laucher are you using on it?
I flashed doixanh's OC module and it seems i used the Undervolt too because it is integrated into the ROM. I can't flash a custom kernel because my phone's manufacturing date is 11W48 so it would be a brick. I'm using GO Launcher EX.
No we mean the step you do. What are the step you do and setting you do to your phone?
try removing the OC and UV modules, and I suggest you to use Laucher Pro, it seems to be smother than other lauchers I ever tried.
To remove both OC and UV just open a root File Explorer (ES File Explorer has root access), go to /system/lib/modules and delet x8oc.ko and x8uv.ko if I´m not wrong. Them you test the rom again and see if you get better performance
It seems to be a bit faster now, I'm not sure yet
I got some free RAM with RAM Manager Pro, now i have the same as on stock ROM.
Well...I didn´t use any app to kill process or manage RAM on my phone, and It is smooth enough for me without OC . I´m using MiniCM right now, but it was the same on GingerDX
It seems to be smooth now, thanks for the help
You´re welcome bro. That is why me and other ppl is here
Fullwiping
I dont agree. I run v025, stock kernel, and i dont flash the overclock modules. It runs fast and smooth. Maybe u installed too much apps, widgets and kind
thanks for the thanks......
rom: gingerdx v025
kernel: stock
Sent by my W8 using XDA app...................
I found GDx (stock) a bit slow too
I dunno why.
That made me switch to PrimeHD.
That's very fast
And the magic is: when i sleep, i turned off data, wifi etc and my battery level doesnt change a single percent. 25 % when i go to sleep, and still 25 % when i wake.
thanks for the thanks......
rom: gingerdx v025
kernel: stock
Sent by my W8 using XDA app...................
Hi, I currently have GingerDX v26 on my X8... stock kernel. But I think its getting a little slow... when I have to answer, all the animations and stuff make my phone slower. Is there any good ROM that can run smooth? or any modification to GingerDX :S... I just want my phone to be smooth so I can run apps without crashing cause of the memory usage (instagram for example).
I was thinking about PrimeHD but it requires a new kernel and I don't know if its safe or something.
PrimeHD is for stock kernel to,try the v9,
Just flash it over GingerDX without full wipe
Install and reboot
Superuser_ said:
PrimeHD is for stock kernel to,try the v9,
Just flash it over GingerDX without full wipe
Install and reboot
Click to expand...
Click to collapse
My personal opinion is PrimeHd.
go for either v7 or v8
For me v9 proved to be a battery drainer.
I didn't notice a massive drain yet
The v9 is more stable,more fast and the scrolling is superb.. especially in browser
I have gdx v27 with alf kernel, with stock I have a same problem as you, but when i put a alfs kernel i get faster, smoother and better rom with no bugs on answer and animations )
Sent from my X8 using xda premium
Hmmm.... I will try PrimeHD with stock kernel, and then I could install a new kernel.
But... can I go back from custom kernel to my stock kernel?
thanks
xwalero said:
Hmmm.... I will try PrimeHD with stock kernel, and then I could install a new kernel.
But... can I go back from custom kernel to my stock kernel?
thanks
Click to expand...
Click to collapse
Yes.. there are stock kernels available of our x8/w8 similar to naa and alfs just flash it..
Sent from my X8 using xda premium
xwalero said:
Hi, I currently have GingerDX v26 on my X8... stock kernel. But I think its getting a little slow... when I have to answer, all the animations and stuff make my phone slower. Is there any good ROM that can run smooth? or any modification to GingerDX :S... I just want my phone to be smooth so I can run apps without crashing cause of the memory usage (instagram for example).
I was thinking about PrimeHD but it requires a new kernel and I don't know if its safe or something.
Click to expand...
Click to collapse
Well ,the new version of GDx (v027) is what impressed me.
Try that if you haven't been able to find a good ROM.
So, ive been using GingerDX since v023. Yesterday i flashed the new version (27) and boy, I am really impressed with this ROM. Last one i was the v025, and was a very good, fast and smooth ROM. But TeamGingerDX did and unbelievable job in v27. Even stable, faster and smoother.
For stock kernel you can use GingerDX v27 or PrimeHD v9 buth works great
I think the most efficient way to boost your phone's speed is using "Supercharger v6" and also configuring android's internal taskmanager to a more aggressive balance.
Hope these can help you.
Also performance settings can have a great effect on your phone if they are set right
Sent from my XPERIA using XDA Premium.
Definitely PrimeHD... So far the most stable and fast one that I`ve tried....
hi im using gingerdx v.28 stock kernel
smooth and no bug
I have just installed Ginger xperia revolution on my x8 with stock kernel...
Every game I have installed crashes...
I have tried...
C.H.A.O.S
Monster Shooter
many more...
A pop up appera with force close....
What to do....??
Please help
Ishanfaithful said:
I have just installed Ginger xperia revolution on my x8 with stock kernel...
Every game I have installed crashes...
I have tried...
C.H.A.O.S
Monster Shooter
many more...
A pop up appera with force close....
What to do....??
Please help
Click to expand...
Click to collapse
clear data in cwm and reinstall games
You can use easy task manager app to clean cache. And another suggestion to u for installing a light custom rom for gaming like gingerdx, kuyadroid 4.5.4,fde4+
Enjoy
Officially corp via w8
use ginger zaraki rom with alfs 9 best for games
use some apps like ram manager for better improvement
use v6 super charger:fingers-crossed:
I have tried almost 7-8 roms on my x8....ginger xperia is till now working bettre for me...
Suggest any other rom with gingerbread with stock kernel only as i dont want to unlock my bootloader
http://forum.xda-developers.com/showthread.php?t=1849622
No problem, u missed somehing, i think..
hey bro,
Just clear all the cache's and do a full wipe (atleast 2 times) when u install new ROM
If the problem still persists, get a light and faster rom or even flash a good custom kernel! (as u said u have custom kernel)
Try GingerZaraki, FDE +4 or even GingerXperia has got good performance with games
and for a good performance and fps, OVERCLOCK ! best is 729 Mhz (remains stable)
Source: my experience!
Hi
I'm currently using minicm7 & nAa-14-gb.
I totally get 4000 Antutu score (new version) 3d=2400 & 2d=~280
I also tried the following roms on the top of nAa kernel :
Gingerzaraki =only slightly less performance
xperiences= lags like ics
Ixperia=similar performance ((maybe a little faster but ios interface is not interesting))
-I'm wondering is there a better rom+kernel for best gaming performance?
-How much is your 3d-2d performance?
-Any tricks or mods to improve gaming?
Tnx
froyopro is best gaming rom with [email protected] v9 no fps cap
fotak-x said:
froyopro is best gaming rom wit [email protected] v9 no fps cap
Click to expand...
Click to collapse
+1
fotak-x said:
froyopro is best gaming rom with [email protected] v9 no fps cap
Click to expand...
Click to collapse
+1 really froyopro is best for our device
Sent from my SONY WALKMAN using JellySony Rom
TAJ_Rocks said:
+1 really froyopro is best for our device
Sent from my SONY WALKMAN using JellySony Rom
Click to expand...
Click to collapse
yup it is...
because its smooth,fast,stabile
but it have some small bugs
fotak-x said:
froyopro is best gaming rom with [email protected] v9 no fps cap
Click to expand...
Click to collapse
Alfs kernel have many different version, what's the difference between them?
Recovery exists in kernel?
Sent from my E15i using Tapatalk 2
jay-z-s said:
Alfs kernel have many different version, what's the difference between them?
Recovery exists in kernel?
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
yes recovery is in kernel
and there is alfs kernel for CM7 roms and for gingerdx rom
also there is fps cap and fps uncapped version
if you want good gaming at gingerbrrad then try ixperia rom with nAa kernel with chainfirr 3d..
its just awsome..
dagger said:
if you want good gaming at gingerbrrad then try ixperia rom with nAa kernel with chainfirr 3d..
its just awsome..
Click to expand...
Click to collapse
Ixperia with nAa hhas wifi bug na??
Sent from my SONY WALKMAN using JellySony Rom
No it doesnt has wifi bug...
I myself use it.
Only tethring doesnt works with it..
sent from my phone using hands and brain...
HaHa
Ive tested froyopro rom v2.5 + alfs v09a no fps cap. Terrible bug with brightness (set at max and won't set to min)
Here are comparison between minicm7-2.2.1 {nAa14 kernel}& froyopro{alfs v09a}
[email protected] mhz (both)
I ran antutu benchmark v3.0.2 at first boot without any changes in rom.
FroyoProv2.5+fix patches)
(click for bigger image)
& minicm7:
As u can see in results, they are pretty like each other ...
*My experience in froyopro : super speedy menu scrolling, and switching between apps. But time for waking up from sleep is about 0.5~1.0 second which is very extreme for a new installed rom. *this is a froyo rom comes with android 2.2.9 ,it should perform faster than gingerbread roms but actually its not very different ...(+brightness bug which cause battery drain)
*my experience in minicm7 ,perfect for day to day use, without any serious bug or problems...
Nice performance & equals to froyo pro in 2d&3d and sometimes better.
Comes with android 2.3.7 which means a huge range of apps &games
my choice is minicm7, what's yous?
Sent from my Black Dragon