Hey guys, Hopefully someone in here can help me figure this out. I was running CM10.1 (from a few months ago) on my nook hd and it was working perfect. It was running off a Sandisk 4gb Class 4 card. Well last night I decided to try for a new version of cm 10.1. I used my Sandisk 16gb Class 10U card and got the latest CM10.1 and latest GAPPS and everything went great. I love it. But I woke up in the middle of the night to see the bright white screen from B & N stuck on 99% and draining my battery. I turned it off and back on and it was fine. Then I woke up a few hours later, and again the same thing. Is this possibly due to the change in SD card or something else. Thanks in advaced.
Jeremy
JeremyD23 said:
Hey guys, Hopefully someone in here can help me figure this out. I was running CM10.1 (from a few months ago) on my nook hd and it was working perfect. It was running off a Sandisk 4gb Class 4 card. Well last night I decided to try for a new version of cm 10.1. I used my Sandisk 16gb Class 10U card and got the latest CM10.1 and latest GAPPS and everything went great. I love it. But I woke up in the middle of the night to see the bright white screen from B & N stuck on 99% and draining my battery. I turned it off and back on and it was fine. Then I woke up a few hours later, and again the same thing. Is this possibly due to the change in SD card or something else. Thanks in advaced.
Jeremy
Click to expand...
Click to collapse
Yes it could be the SD. Since it boots to stock, that means you are running on SD. Whose system? Verygreen or bokbokan? If bokbokan, and not his hybrid, that explains the 99%.
Sent from my Nook HD+ running CM10.1 on emmc.
Yes
It is Bokbokan version....And i'm pretty sure I did not do the hybrid setup....do you suggest I try that out and see what it does. Is Verygreen's version any different/better? and Thanks for your help.
leapinlar said:
Yes it could be the SD. Since it boots to stock, that means you are running on SD. Whose system? Verygreen or bokbokan? If bokbokan, and not his hybrid, that explains the 99%.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
JeremyD23 said:
It is Bokbokan version....And i'm pretty sure I did not do the hybrid setup....do you suggest I try that out and see what it does. Is Verygreen's version any different/better? and Thanks for your help.
Click to expand...
Click to collapse
You definitely need to move to either the hybrid or verygreen's new SD scheme. Both eliminate the 99% problem. And bokbokan's CM10.2 scheme does too.
But it is your SD that is causing the reboot in the first place. The SD is not reliable and the system panics and reboots. With bokbokan's pure system it will hang at 99% when it does.
Edit: But, be warned, the CM10.1 from bokbokan and from verygreen are different. Bokbokan has incorporated different features. And verygreen has stopped updating his.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks Alot
Hey thanks so much for your help...I will give the hybrid version a shot. You mentioned the CM 10.2. Any feedback on that. Is it worth it right now to try it out or should I wait a little longer to work some bugs out?
leapinlar said:
You definitely need to move to either the hybrid or verygreen's new SD scheme. Both eliminate the 99% problem. And bokbokan's CM10.2 scheme does too.
But it is your SD that is causing the reboot in the first place. The SD is not reliable and the system panics and reboots. With bokbokan's pure system it will hang at 99% when it does.
Edit: But, be warned, the CM10.1 from bokbokan and from verygreen are different. Bokbokan has incorporated different features. And verygreen has stopped updating his.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
JeremyD23 said:
Hey thanks so much for your help...I will give the hybrid version a shot. You mentioned the CM 10.2. Any feedback on that. Is it worth it right now to try it out or should I wait a little longer to work some bugs out?
Click to expand...
Click to collapse
Many like it, but I still run CM10.1.
Sent from my Nook HD+ running CM10.1 on emmc.
quick update
So after trying to decide what the best move was I decided to try emmc method. Being pretty basic with my knowledge I've always been scared to try this. Afraid I was going to mess some this up. But what a difference. I've been missing out. Thanks again for your help and suggestions.
QUOTE=leapinlar;46025405]Many like it, but I still run CM10.1.
Sent from my Nook HD+ running CM10.1 on emmc.[/QUOTE]
Related
Hello:
I was thinking about buying a Nook HD+ for my wife. The price is right and it has microSD expansion. But I don't want to use the Nook UI and want to install CM10 instead.
Is this possible with Nook HD+?
Thanks.
-lukin- said:
Hello:
I was thinking about buying a Nook HD+ for my wife. The price is right and it has microSD expansion. But I don't want to use the Nook UI and want to install CM10 instead.
Is this possible with Nook HD+?
Thanks.
Click to expand...
Click to collapse
Yes, there is a thread by verygreen in the development forum for installing CM10 on SD.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Yes, there is a thread by verygreen in the development forum for installing CM10 on SD.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thanks leapinlar. I'll look at his thread. What are your general thoughts are of Nook HD+ with CM10? Do you have any cautions about the post-install experience?
Cheers.
-lukin- said:
Thanks leapinlar. I'll look at his thread. What are your general thoughts are of Nook HD+ with CM10? Do you have any cautions about the post-install experience?
Cheers.
Click to expand...
Click to collapse
I use it as my daily driver. It still has a few minor bugs. I use the 1-08-13 version and it is very stable. Look at his 1-7-13 post to get it.
Sent from my Nook HD+ running CM10 on Hybrid SD
I use for daily CM10.1 on SD. I cant say nothing bad. All things what i had have described on CM10.1 thread too. All apps which one i tested dont had any glitches (believe me, i tested big amount different apps). Only thing is that i dont use bluetooth because i dont have needless. Also wifi have some connection lose problems if wifi ssid is hidden. But this is random.
I'm on CM10.1 because i need different user accounts on one devise.
I'm running Verygreen's 2/12 update and have no trouble or complaints at all. Daily driver all the way. Don't use BT, so I don't know about that. I haven't had reboot problems or anything.
Sent from my JellyBean-Flavored Nook HD+ using Tapatalk 2
here is my info:
Nook HD+ info:
software version: 2.0.6
Model #: BNTV600
USB set to: MTP
Micro SDCard: Sandisk - 16gb - Class 4
Items & Method used: sdcard-cwm-early4.img
cm-10-20130220-UNOFFICIAL-ovation
For first time install only guide:
http://forum.xda-developers.com/showthread.php?t=2032364
Did not work, nothing found to install & sometimes can't mount card
----------------
Also tried: http://forum.xda-developers.com/showpost.php?p=37884146&postcount=565
USB Won't mount and again nothing on card or internal
Go to my HD+ easy install guide linked in my signature. I have a new image file and simple instructions.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Go to my HD+ easy install guide linked in my signature. I have a new image file and simple instructions.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thank you very much, that worked 100%
i love xda and you have been the best person to reply to my stuff but they really need to clean the forum!
AACThaKid said:
Thank you very much, that worked 100%
i love xda and you have been the best person to reply to my stuff but they really need to clean the forum!
Click to expand...
Click to collapse
Do you have any problem when using CM 10.0 ? Sometimes, my nook HD+ restart without doing nothing
Nook HD had CM10.1, but Nook HD+ haven't, hic hic
USRobotics said:
Do you have any problem when using CM 10.0 ? Sometimes, my nook HD+ restart without doing nothing
Nook HD had CM10.1, but Nook HD+ haven't, hic hic
Click to expand...
Click to collapse
That is one of the bugs with CM10 on the HD+. It will spontaneously reboot sometimes. If you use my Hybrid setup as linked in my signature, the reboots are reduced for some people.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
That is one of the bugs with CM10 on the HD+. It will spontaneously reboot sometimes. If you use my Hybrid setup as linked in my signature, the reboots are reduced for some people.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Indeed, leapinlar is once again correct!
I've been using the Hybrid setup, and the reboots are significantly less. After a few weeks of rebooting ~every two days, CM10 has settled down. It hasn't rebooted in a long while.
I'm using the Hybrid method, on a SanDisk Class 4, 4GB MicroSD card. Hybrid reboots less than the standard CM10, and is much better in performance. I don't see why everyone doesn't embark on using Hybrid. You can thank leapinlar for the Hybrid boot too.
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
snowlarbear said:
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
Click to expand...
Click to collapse
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
i saw in the SD install thread that the latest ones (may) are not working with hybrid.
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
update for anyone reading this, leapinlar released the hybrid fix for the newer roms. will give it a try after i clarify how to get a rom with tablet mode enabled.
I did the SD card version of cm10 a few months ago but battery life seems to be awful so was looking at upgrading it to cm10.1.
Have had a good look through the development forum but there isnt much info on actually going from 10 to 10.1, they all seem to be based on starting from scratch.
Wondered if anyone could let me know what files and instructions i need to go from cm10 to cm10.1?
Many thanks
freejack2k
freejack2k said:
I did the SD card version of cm10 a few months ago but battery life seems to be awful so was looking at upgrading it to cm10.1.
Have had a good look through the development forum but there isnt much info on actually going from 10 to 10.1, they all seem to be based on starting from scratch.
Wondered if anyone could let me know what files and instructions i need to go from cm10 to cm10.1?
Many thanks
freejack2k
Click to expand...
Click to collapse
You don't say which device you are using, HD or HD+. If you are running verygreen's old legacy HD+ SD setup, you need to update to his new SD setup. He uses a different SD scheme now that operates much better. So that means you need to start over with the SD. Format it with SDFormatter and then burn his early7.1 image to the SD and follow the rest of his instructions in the thread, including flashing the newer version of gapps. Battery life is much improved.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks mate
Its the HD+ just checked the build number and its 20121231 so quite old. Will start reading up for n what I need to do.
If anyone could link me to the correct thread I would appreciate it
Thanks
freejack2k said:
Thanks mate
Its the HD+ just checked the build number and its 20121231 so quite old. Will start reading up for n what I need to do.
If anyone could link me to the correct thread I would appreciate it
Thanks
Click to expand...
Click to collapse
Use this thread:
http://forum.xda-developers.com/showthread.php?p=36421852
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Use this thread:
http://forum.xda-developers.com/showthread.php?p=36421852
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks mate
Have now done it and got it running however there dosent seem to be a play store app any ideas where i get that and how to install?
freejack2k said:
Thanks mate
Have now done it and got it running however there dosent seem to be a play store app any ideas where i get that and how to install?
Click to expand...
Click to collapse
Did you install gapps-jb-20130301-signed.zip? Get it at goo.im.
Sent from my Nook HD+ running CM10.1 on emmc.
Many thanks for the helpful posts. All now fully installed and working.
ok guys I'm sort of a newbie to this stuff so i would really love it if you guys could help me out! I'm trying to update my CM 10.1 to CM 10.2 so that i can get 4.3 and i found a post about it being possible to do it on a nook, so i downloaded all the stuff i needed just like when i put 10.1 on it and everything seemed to go fine when i was downloading it but when i booted it up none of my gapps are working (and i got the 4.3 apps that i was supposed to get) and it still says that i am running on 4.2.2....
now I'm sure i have done something wrong and it's probably the easiest fix in the world but if there is anyone out there who can tell me how i need to go about doing this update i would be very appreciative thank you very much and i hope you all have a great day!
Kreachur said:
ok guys I'm sort of a newbie to this stuff so i would really love it if you guys could help me out! I'm trying to update my CM 10.1 to CM 10.2 so that i can get 4.3 and i found a post about it being possible to do it on a nook, so i downloaded all the stuff i needed just like when i put 10.1 on it and everything seemed to go fine when i was downloading it but when i booted it up none of my gapps are working (and i got the 4.3 apps that i was supposed to get) and it still says that i am running on 4.2.2....
now I'm sure i have done something wrong and it's probably the easiest fix in the world but if there is anyone out there who can tell me how i need to go about doing this update i would be very appreciative thank you very much and i hope you all have a great day!
Click to expand...
Click to collapse
Are you trying to update CM10.1 that you installed on emmc? If so, you can't. The version of CM10.2 that is available is for SD installs, not emmc. Flashing it to emmc will not work.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Are you trying to update CM10.1 that you installed on emmc? If so, you can't. The version of CM10.2 that is available is for SD installs, not emmc. Flashing it to emmc will not work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
oooooh ok thank you so much, I had not realized that. So for now i guess i will just go back to my trusty 10.1, do you know if they are currently working on a 10.2 emmc?
Kreachur said:
oooooh ok thank you so much, I had not realized that. So for now i guess i will just go back to my trusty 10.1, do you know if they are currently working on a 10.2 emmc?
Click to expand...
Click to collapse
No, I don't know. But I'm sure it will be available someday.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No, I don't know. But I'm sure it will be available someday.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
alright well thank you again!
CM10.1 to 10.2 upgrade for sdcard builds
After several tries that resulted in one issue or another, I successfully updated my sdcard install from CM10.1 to CM10.2. I think my unsuccessfuly attempts failed because of gapps. One of the links in th CM10.2 thread pointed to a GAPPS 4.3 "Core" zip file that ultimately worked for me. The other gapps 4.3 files usually resulted in the "two cLock app" error and I could never connect to Google service (Play Store and GMail, in particular). My wi-fi indicator on the status bar remained grey, never turning blue. All of my network-dependent apps worked (CNN, XDA, etc.) except for those that depend on Google.
Other issues that seem consistent:
1. Can't see internal storage (emmc); I can't find it anywhere (usual contents of /storage have been apparently moved anyway)
2. Weather Channel app had to be set up from scratch
3. News & Weather app/widget is gone
4. Background image seems to get reset occasionally (from a live wallpaper that I selected); not necessarily limited to CM10.2, but seems to be more prevalent now than with CM10.1
...
999. I'mnot certain if it is related to CM10.2, but the Engadget app has been pretty unstable since the upgrade.
-SUO, now only wants Halo and TabletUI