This is my bro's old phone, and he said it's rooted and it has CWM installed.
1. I wanted to install a new rom so I put the zip file in an SD card.
2. There's a Recovery mode option when you want to restart the phone
3. I wiped the cache and data/partition.
4. I tried searching for the zip file, but I couldn't find it.
5. So I turned off the phone and relocated the zip file to the root of the sd drive.
Now! I'm trying to load into recovery, but I can't.
Is it bricked????
I plugged it on the pc and it made a sound that detected the device.
Btw, I'm a total amateur at programming/rooting, so all the help in the simplest form would be very appreciated.
Please help, the phone is still good and I don't want it to go to waste. I wanna start using it! Any help is appreciated (including reference links to other posts/threads)
to come into recovery mode, pull your battery out and then in again. then hold volume up, home button and power on all together....hold them all 3 till Samsung S logo is gone or till Kernel logo appears, the you can led the power button free but hold the other 2 till you will be in recovery mode again.
In CWM do not search or tick for the update zip. Go over: install zip from internal sd card and then phone should show you the files which are included there. Hopefully device will show you the rom.zip you want to flash there too.
If not, then i recommend to search here in the forum, and take you some to read and inform you about next steps....here are some links for first and further informations:
Firmwares and how to install via Odin:
http://forum.xda-developers.com/showthread.php?t=1102881&highlight=odin
[A.I.O Rescue & Recovery] My Android Collection:
http://forum.xda-developers.com/showthread.php?t=1796807
hi guys....
i have a i9000.......... with soft-brick, i use a jig (301k whit miniusb ), and access to download mode and flashed a stock rom......
but the internal memory, keeps previous programs and gives me FC, with CWM recovery after doing full wipe, and format the internal memory, restarting the computer maintains all, do not delete anything ........
now get a message that the internal sd is damaged, but not allow me to enter mode debbug because the phone is freeze ... I also recognize the pc to format the external memory .........
as I can do to install a ROM CM-10, in the external memory?
thanks for the help.
sorry for my eng.
You say the message says your internal SD is damaged. What EXACTLY does the message say?
Sent from my GT-I9000 using Tapatalk 2
try this! http://forum.xda-developers.com/showthread.php?t=1906089 i don't have an sgs, so i can't tell you if it works and i can't help you, but in that thread you can find someone to help you
I was having the same problem and found the solution here
I was having the same problem and found the solution here http://forum.xda-developers.com/showpost.php?p=35585404&postcount=8
this is my post to thanks for the kernel
http://forum.xda-developers.com/showpost.php?p=38210629&postcount=12
look for a sd fast I have a class 4 and was too slow and buy a class 10 and now works just like new.
far2 said:
I was having the same problem and found the solution here http://forum.xda-developers.com/showpost.php?p=35585404&postcount=8
this is my post to thanks for the kernel
http://forum.xda-developers.com/showpost.php?p=38210629&postcount=12
look for a sd fast I have a class 4 and was too slow and buy a class 10 and now works just like new.
Click to expand...
Click to collapse
Thank you.
I flash the kernel but got a boot loop.
I have the firmware JW4 not get the JVU ... my model is i9000t, could you help me get the firmware that worked with your phone.
Thanks in advance.
sorry for my English.
solved!!!
Downloading the ROM file: I9000XXJVU_I9000OXAJVU_OXA.rar
Downloading the ODIN & PIT files: Flashprogram_Samsung_I9000__Pits.rar
Downloading the Drivers for the PC: SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip
Most importantly: KEEP YOUR PHONE FULL CHARGED OR AT-LEAST ABOVE 50% CHARGING LEVEL.
Once you are done with the prerequisites, you can move down to the installation procedure as below:
1. Unzip the ROM, ODIN and Drivers to their respective folders in case it requires any password, it will be “samfirmware.com”
2.Now, the first thing to be done is install the phone drivers on the PC which you are to use for flashing the ROM. To do this, navigate to SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0 folder and select the appropriate setup x86 or x64 based on the type of OS you are using on your PC.
Once this one has been installed, get your GT I9000 in the download mode by using the 3-Button combo. For that, first switch off the phone and wait for it to vibrate a little just to confirm that it is completely switched off. Then, press the three buttons: Power Key, Volume Down and Home Key and hold until you see a green android saying “Downloading”
3. Next, goto Flashprogram_Samsung_I9000__Pits folder and open I9003_Odin3 v1.82.exe (Don’t bother the I9003 in the file name. It is compatible for I9000 also)
4.Once ODIN has be opened, connect your phone to the PC while it is in download mode. Once connected, an “Added” remark will appear on the message window.
5. Next, click on the PIT button, navigate to the Flashprogram_Samsung_I9000__Pits folder and select s1_odin_20100512.pit
6. Then, click on the PDA button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
7. Then, click on the PHONE button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 file.
8. Then, click on the CSC button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the GT-I9000-CSC-MULTI-OXAJVU.tar.md5 file.
PLEASE MAKE SURE TO SELECT THE FILE PROPERLY AS ABOVE AND DOUBLE CHECK BEFORE CONTINUING FURTHER.
9. Next, make sure that Re-Partition, Auto Reboot and F. Reset Time have been check marked.
Once all the above steps are done, click on Start button and wait for the message window to show “All threads completed” and “Pass” displayed on the top left box.
10. Then, click on PDA button, navigate to Kernel_JVU_Fix_sdcard file, and clic on Start!
and viola!!!
thanx far2
I glad this Solve the SGS problem for you
gerickt said:
solved!!!
and viola!!!
thanx far2
Click to expand...
Click to collapse
I glad this Solve the SGS problem for you, and all the people in the forum, hope some developer can make a kernel like this but for the new jw4+ or even better for the cm9 or cm10
I know some people has install the cm9 and cm10 do but they have a total sd failure, our sd is still readable and is even worse.
Gerickt yesterday I write to you a PM in Spanish wit more indication to you did you receive?
PD: nice you made a detail description for the procedure :good:
the developer answer to my
rxxxni was the developer to post the kernel here and he just answer the place to look for more info in his kernel here
htcmania.com/showthread.php?t=520348
I don't know if this is bad to post other links outside the xda but he made the kernel and there is more info
Ok this is taken from the HTC SPAIN site (Im only translating it)
1.- Download both files at the bottom:
2.-You will need to install the OMAP4430 drivers (they are inside the file you just download)
a) open device manager
b) Connect the phone to usb with out the battery,
c) you will see "omap4430 device" appearing and disappearing
d) as soon as you see it right click on it and chose proprieties
e) click on the drivers tab and select update driver
f) select the driver on the folder "usb_drv_windows" from the file you downloaded and install them
g) wait till it finish installing them
[Edited by pete3000 to make the process more understandable]
3.- now run the file "Instalar Recovery ICS Europeo.bat" then:
a) Connect the USB cable from the phone to the PC without the battery
b) Wait until the message "Wait 5-Seconds...", then put the battery in.
c) Wait until installation is complete and you see the green screen and the message.
------------------------------
Installed recovery!
Please remove the USB cable
------------------------------
d)Now you can disconnect the cable USB, remove the battery, return the battery, and boot the phone.
4.- Copy the "Su_Bbox_1.20.2_gazhead_signed.zip" file to memory (either internal or external SD card) and install it with in CWM
5. to boot into Clockwork Mod, shut the phone down all the way
a) hold down the 3D button, the VOL DOWN and POWER at the same time. (some say hit vol up but this didn't work for me)
b) when the backlight comes on the screen, let go of the power and vol DOWN ONLY, keeping the 3D held down until you see the clockworkmod touch interface come up.
c) choose install zip from sdcard
find the Su_Bbox_1.20.2_gazhead_signed.zip file using the vol + and - keys.. then scroll downpast the No's to the YES and tap it on the screen.
And you will have a rooted ISC V30B
Enjoy!
http://www.htcspain.com/links.php?u...om/?http://www.mediafire.com/?t2tz6xp7zfwqldo
http://www.htcspain.com/links.php?u...om/?http://www.mediafire.com/?5io5b2r98nt28bb
i followed this quide but now when i boot up i have greyd in lg logo is there a way to get rid of this or?
I wish this was as easy as you make it sound. When i plug my phone into the computer with no battery in, device manager takes 5 seconds or so to load the devices again, and by that time, there is no omap option to select. Is the omap driver messed up, maybe we could modify it to work without the device manager work around
Sent from my LG-P925 using xda app-developers app
got it working but would have liked to see it in english
Finally got it to work!
Notes that should be added. Before Step 3, Take the "leeme.txt" file and throw it into Bing Translate you will see this (rearranged/edited to help from the sequence above):
3.- now run the file "Instalar Recovery ICS Europeo.bat" then:
a) Connect the USB cable from the phone to the PC without the battery
b) Wait until the message "Wait 5-Seconds...", then put the battery in.
c) Wait until installation is complete and you see the green screen and the message.
------------------------------
Installed recovery!
Please remove the USB cable
------------------------------
d)Now you can disconnect the cable USB, remove the battery, return the battery, and boot the phone.
4.- Copy the "Su_Bbox_1.20.2_gazhead_signed.zip" file to memory (either internal or external SD card) and install it with in CWM
5. to boot into Clockwork Mod, shut the phone down all the way
a) hold down the 3D button, the VOL DOWN and POWER at the same time. (some say hit vol up but this didn't work for me)
b) when the backlight comes on the screen, let go of the power and vol DOWN ONLY, keeping the 3D held down until you see the clockworkmod touch interface come up.
c) choose install zip from sdcard
find the Su_Bbox_1.20.2_gazhead_signed.zip file using the vol + and - keys.. then scroll downpast the No's to the YES and tap it on the screen.
pete3000 said:
Finally got it to work!
Notes that should be added. Before Step 3, Take the "leeme.txt" file and throw it into Bing Translate you will see this (rearranged/edited to help from the sequence above):
3.- now run the file "Instalar Recovery ICS Europeo.bat" then:
a) Connect the USB cable from the phone to the PC without the battery
b) Wait until the message "Wait 5-Seconds...", then put the battery in.
c) Wait until installation is complete and you see the green screen and the message.
------------------------------
Installed recovery!
Please remove the USB cable
------------------------------
d)Now you can disconnect the cable USB, remove the battery, return the battery, and boot the phone.
4.- Copy the "Su_Bbox_1.20.2_gazhead_signed.zip" file to memory (either internal or external SD card) and install it with in CWM
5. to boot into Clockwork Mod, shut the phone down all the way
a) hold down the 3D button, the VOL DOWN and POWER at the same time. (some say hit vol up but this didn't work for me)
b) when the backlight comes on the screen, let go of the power and vol DOWN ONLY, keeping the 3D held down until you see the clockworkmod touch interface come up.
c) choose install zip from sdcard
find the Su_Bbox_1.20.2_gazhead_signed.zip file using the vol + and - keys.. then scroll downpast the No's to the YES and tap it on the screen.
Click to expand...
Click to collapse
did you need to have the normal lg drivers installed also, mine stays at the grey lg logo, and the pc seem to be finding all the other device that need drivers.
Omap4boot stays at a blue screen " waiting for device "never turns green, does it normally complete everything at the grey lg logo?
---------- Post added at 12:24 AM ---------- Previous post was at 12:02 AM ----------
ok got it working there was a 2nd device in device manager i had to manually direct to the same driver folder....
Again, it would have been easier if the BAT file was written in English. maybe some dev on here can update it. I would also like to see them use the adb capabilities and install the su, so you dont have to go into CWM to install it.
Now we need an update to WIFI Tether, unless someone finds a successful combination in the program for setting it up. it had settings for the thrill 4g running froyo and gingerbread.
Thanks all this worked great. I'm also looking for a tehering hotspot fix.
ROOT LG THRILL ICS P92530b AT&T
3.- now run the file "Instalar Recovery ICS Europeo.bat" then:
a) Connect the USB cable from the phone to the PC without the battery
b) Wait until the message "Wait 5-Seconds...", then put the battery in.
c) if it won't boot up select the driver on the folder "usb_drv_windows" from the file you downloaded and install them again
d) Wait until installation is complete and you see the green screen and the message.
------------------------------
Installed recovery!
Please remove the USB cable
!! IMPORTANT!! be careful using ROM MANAGER with rooting your phone w/this method
The Clockworkmod recovery this bat file uses is a little bit old and has a "reboot" bug. To avoid it, Do not install the ROM MANAGER on google play and immediately boot to the CWM. ROM MANAGER sets a trigger that keeps rebooting into the old CWM and never back to the regular OS. It's officially called the Clockworkmod reboot loop
To fix this, I used this tool which launches a .BAT file http://forum.xda-developers.com/showthread.php?t=2144738 similar to the one you rooted with above. you will need to update the clockwork mode to version 6.0.1.9 (option 5). i also flashed the ICS boot loaders too (option 8).
when i rebooted the phone a new version of CWM showed up and all i had to do was reboot thru CWM. And i was back to the at&t boot screen.
pete3000 said:
The Clockworkmod recovery this bat file uses is a little bit old and has a "reboot" bug. To avoid it, Do not install the ROM MANAGER on google play and immediately boot to the CWM. ROM MANAGER sets a trigger that keeps rebooting into the old CWM and never back to the regular OS. It's officially called the Clockworkmod reboot loop
To fix this, I used this tool which launches a .BAT file http://forum.xda-developers.com/showthread.php?t=2144738 similar to the one you rooted with above. you will need to update the clockwork mode to version 6.0.1.9 (option 5). i also flashed the ICS boot loaders too (option 8).
when i rebooted the phone a new version of CWM showed up and all i had to do was reboot thru CWM. And i was back to the at&t boot screen.
Click to expand...
Click to collapse
So are you running ICS or GB? Option 5 is for GB. Just double checking before I follow your lead.
Nevermind... I did the update with ICS and it worked fine. The only difference I see is you will need to hold down the power button and vol down longer when you boot it into CWM. If you release the power button and vol down button as soon as you see the back light it shuts down instead of boot.
I made an attempt to edit the settings.db , hoping to regain my hotspot functionality.. No luck the phone hung during boot. So I decide to factory reset it. Now there is no entitlement entries in the settings.db. The file is much smaller. I'm guessing the carrier has moved the wifi entitlement to another db.
i found a wifi tether post for ICS in the O3D area, but it didnt work either..
i saw this http://forum.xda-developers.com/showthread.php?t=2181555 but his settings didn't work. I hope someone can help us with it soon. i filed a bug report to the actual wifi router site.
I got hotspot working. I'll send details after I get home this evening.
ICS Rooted LG Thrill AT&T Tethering
I put the instruction on the tethering thread.
http://forum.xda-developers.com/showthread.php?p=39824110#post39824110
Can i use this tool with a stock ICS Rom?
pete3000 said:
The Clockworkmod recovery this bat file uses is a little bit old and has a "reboot" bug. To avoid it, Do not install the ROM MANAGER on google play and immediately boot to the CWM. ROM MANAGER sets a trigger that keeps rebooting into the old CWM and never back to the regular OS. It's officially called the Clockworkmod reboot loop
To fix this, I used this tool which launches a .BAT file http://forum.xda-developers.com/showthread.php?t=2144738 similar to the one you rooted with above. you will need to update the clockwork mode to version 6.0.1.9 (option 5). i also flashed the ICS boot loaders too (option 8).
when i rebooted the phone a new version of CWM showed up and all i had to do was reboot thru CWM. And i was back to the at&t boot screen.
Click to expand...
Click to collapse
Hi Pete. Personally i had a problem with the easy form of rooting the stock ICS, because i got the clockwork mod loop when i tried to go back into a factory reset.
Can i Use your method with a stock ICS in my thrill?
Another question is, Have any body fix the movie player missed function in ICS? because in GB i can play any 3D movie, whatever the format and can change it.
Thanks for your time
yes. I used it with stock ICS from AT&T/LG.
for 3D movies, open the movie in the stock player. you will see a side by side version of the movie. Hit the 3D button then hit the the settings button to choose side-by-side.
hotdog32836 said:
I wish this was as easy as you make it sound. When i plug my phone into the computer with no battery in, device manager takes 5 seconds or so to load the devices again, and by that time, there is no omap option to select. Is the omap driver messed up, maybe we could modify it to work without the device manager work around
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Please hold Vol - while you're plugging the phone in, hold it down whilst you are in Device Manager, something should pop up stating OMAP-344 Or whatever the number shows up as.
Sent from my HTC One VX using xda app-developers app
Help?
My phone rebooted after updating with the folder. Still no green message.
there are too many reply's. which issue were you having problems with.
Hi all
Now,I'm using Note 3 AT&T (N900A). When I am using Odin to go to Recovery, then press Fail Odin, then I can not turn it on. Now, I can not use any buttons on the machine. When I press the Power button, the machine does not vibrate. The screen is dark. Anyone can help me? Thanks so much!!
P/s: sorry about my English.
Follow instructions word for word, take your time and go slow
1.Download the (alreadykitkat.zip) if you haven't done so yet.
2. Extract it to somewhere on your desktop or PC
3.Copy “Safestrap-Custom.apk” to your phones internal memory, and install it. Make sure you install recovery from within safestrap app, or verify that it is installed
4.Next copy the rom to your phones internal memory(it’s called XNote Port.zip)
5.Boot into download mode (power off, then hold-Volume down, Home and power button at same time
6.Open the “Togetsafestrap” folder and open Odin (win 7 and 8 users may need to run with administrator rights). Add the correct partition Files,
Make sure the files or AP_N900AUCUBMJ5.tar.md5 and BL_N900AUCUBMJ5.tar.md5 and verify your Odin window looks like this picture
7.Click start. Now when the phone is booting up make sure to click “recovery” on the safestrap screen.
(If you missed it just hold down, power button until phone reboots)
8. You can wipe before flashing (Optional) if you want a clean install. Flash the X-Note Port.zip to Stock slot,
But don’t reboot when done,
9. Keep hitting the back button until you see the reboot menu button
Press reboot menu button and select download mode button. Or if you messed up and rebooted just Press Volume down, Home and power button at same time until your back in download mode.
10. Now open the folder “togetbooting” and open Odin. Select the correct partition Files, Make sure you select AP_N900AUCECMGL.tar and BL_N900AUCECMGL.tar and verify your Odin window looks like this picture
11. Click start
done, enjoy the ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2654992
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
440bro said:
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
Click to expand...
Click to collapse
it wont work if he isn't on mi9. it wont let him downgrade.
Hello guy, I'm Lenovo a7000
I use my phone with root very well. Then yesterday i decide to up new rom. But i found it not access my sdcard or internal storage. So i go TWRP to do a format (which delete all content on internal storage). After then, it's only can go TWRP although i install a new rom. And then problem go here:
- I plug phone to computer and it's go to TWRP screen
- i run flash_tool.exe to download MT6752_Android_scatter.txt
- and then, the phone can't show anything on screen. Press POWER only vibration, same with POWER + Up/down Volume.
:cyclops: I feel very bad for that. Anyway out for me.
:highfive: Thank you :fingers-crossed: