Developer Edition-Back to stock - One (M7) Q&A, Help & Troubleshooting

I have the developer edition and am going to return it. I downloaded the latest 4.3 DE ROM off of HTC's website. Can I just flash this in recovery?
Obviously, don't care about re locking the bootloader as it ships unlocked.
Thank you!

Nothing to do with recovery, you flash it in fastboot mode
1. fastboot oem rebootRUU
2. fastboot flash zip name_of_zip_file.zip - e.g. fastboot flash zip rom.zip - if you're using the ROM ZIP from HTCDev (PN07IMG_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.zip)
3. Once it says to flush and try again do exactly the same command again without rebooting or anything - e.g. fastboot flash zip rom.zip
4. Once finished, fastboot reboot
OR
1. Connect phone in fastboot mode (make sure PC recognises it)
2. Run the RUU from HTCDev - RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe
I'm assuming you're S-OFF at the moment? It shouldn't matter if not but it helps

EddyOS said:
Nothing to do with recovery, you flash it in fastboot mode
1. fastboot oem rebootRUU
2. fastboot flash zip name_of_zip_file.zip - e.g. fastboot flash zip rom.zip - if you're using the ROM ZIP from HTCDev (PN07IMG_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.zip)
3. Once it says to flush and try again do exactly the same command again without rebooting or anything - e.g. fastboot flash zip rom.zip
4. Once finished, fastboot reboot
OR
1. Connect phone in fastboot mode (make sure PC recognises it)
2. Run the RUU from HTCDev - RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe
I'm assuming you're S-OFF at the moment? It shouldn't matter if not but it helps
Click to expand...
Click to collapse
Going to try the RUU exe route. Thank you.

So, I am on the same boat here. I actually have sold my device on eBay and want to send it to the buyer with 4.3 on it. I am on Viper Rom 2.5.0.64 with Android 4.2.2 on it. I have the developer edition, I do not have it S-OFF and I just ran the .exe file but got an error at some point. I will re-run it and see if I get a different result.
---------- Post added at 11:08 AM ---------- Previous post was at 10:53 AM ----------
Same Result again - ERROR 144 - UNKNOWN ERROR. The ROM Update Utility cannot update your Android Phone. Please get the correct ROM Update Utility and try again.

Dodolom said:
So, I am on the same boat here. I actually have sold my device on eBay and want to send it to the buyer with 4.3 on it. I am on Viper Rom 2.5.0.64 with Android 4.2.2 on it. I have the developer edition, I do not have it S-OFF and I just ran the .exe file but got an error at some point. I will re-run it and see if I get a different result.
---------- Post added at 11:08 AM ---------- Previous post was at 10:53 AM ----------
Same Result again - ERROR 144 - UNKNOWN ERROR. The ROM Update Utility cannot update your Android Phone. Please get the correct ROM Update Utility and try again.
Click to expand...
Click to collapse
I got the same error. screen showed fastboot usb, everything seemed to be working and then I got an error message.
I am S-On.

So, i got it done.
Per this article - http://www.androidayos.com/2013/09/28/download-htc-one-developer-edition-4-3-stock-ruu-3-22-1540-1/
you need to have the bootloader LOCKED first to be able to run the .exe successfully. I re-locked the bootloader via Hasoon2000's HTC One All in One Toolkit. You can find his toolkit over here on xda, just google it or something.
I now have a 4.3 Android bootloader locked,etc...

Dodolom said:
So, i got it done.
Per this article - http://www.androidayos.com/2013/09/28/download-htc-one-developer-edition-4-3-stock-ruu-3-22-1540-1/
you need to have the bootloader LOCKED first to be able to run the .exe successfully. I re-locked the bootloader via Hasoon2000's HTC One All in One Toolkit. You can find his toolkit over here on xda, just google it or something.
I now have a 4.3 Android bootloader locked,etc...
Click to expand...
Click to collapse
I have the toolkit but not able to lock the bootloader. I keep getting a "not found" error.
Ok, now i have a really big problem. I managed to relock the bootloader. Everything appeared to be going fine. Then I got the failed error. Exclamation point in each corner. I followed the RUU tool's instructions but it wont get off that screen. I have tried holding down power, the screen goes dark and then I get the same screen.
Any help????

You can just do it through fastboot
fastboot oem lock
If you're S-OFF you don't have to be locked which is why I didn't mention it before

Related

[RUU] Sprint HTC One | 1.29.651.10 | Encrypted | Decrypted | Stock Rooted ROM

Here we have the RUU for the Sprint HTC One 1.29.651.10!!! This RUU is for the Sprint One ONLY to restore your phone back to stock. You MUST relock your bootloader prior to using this RUU.
HUGE Thanks to the dude who hooked me up, you're awesome!
Decrypted version & stock deodexed ROM below...
How to use:
-Download Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
-extract zip to a folder on your pc
-boot into bootloader (various ways)
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run setup.exe from the extracted folder. it will run the RUU utility & flash back to stock
if you are not familiar w/ adb/fastboot, use Hasoons all in one toolkit to boot into bootloader & relock bootloader
[TOOL] HTC One (Sprint) All-In-One Toolkit V1.0 [4-15-2013] [PERM ROOT][Noob-Proof]
Need more help? Check out the videos qbking77 & wwjoshdew made!
DEVs, here is the Decrypted version!
Sprint_HTC_One_m7wls_1.29.651.10_RUU_decrypted.zip
Stock Rooted ROM
Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Previous 1.29.651.7 RUU
Sprint_HTC_One_m7wls_1.29.651.7_RUU.zip
encrypted 1.29.651.7 ROM.zip
Sprint_HTC_One_m7wls_1.29.651.7_encrypted_ROM.zip
AWESOME! Thanks so much! Hopefully can return my One with a blown speaker (took 4 days :-/) now!
Thanks so much for this!
who wants to be the first one to flash it? haha
Ahanix said:
Thanks so much for this!
who wants to be the first one to flash it? haha
Click to expand...
Click to collapse
I did this morning
O.M.J said:
I did this morning
Click to expand...
Click to collapse
Well, I guess that explains why I have been running your ROM
Retracted.......:sly:
NICE! I'll get a video of this up soon! Thanks a lot man (and benny3 for linking me to it!
BTW: It looks like I'm the first one to give this thread a well deserved five star rating!
UPDATE: I made a video of how to flash stock! You can view it HERE.
Which download do I pick to make my phone 100% stock so I can return it? Sprint sucks I am going with AT&T, so I need to return the phone to stock. Sprint lied to me about coverage, not trying to troll, just a bit pissed off.
Thanks bro Your awesome!!!
What a G!!! Thank you, sir! :highfive:
This should be stickied!
Thank you for this OMJ. Really saved my a$$.
Do you know what this error message means?
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
I got error 155 and I used the first link help?
vampire5003 said:
I got error 155 and I used the first link help?
Click to expand...
Click to collapse
EDIT.
Sorry I didnt read the post right.
I thought you ment trying to download.
Boomchaos said:
Do you know what this error message means?
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
Click to expand...
Click to collapse
It just needs to flush it. After the error immediately re run
fastboot flash zip nameOfFile.zip
It will go thru then
---------- Post added at 03:26 PM ---------- Previous post was at 03:03 PM ----------
vampire5003 said:
I got error 155 and I used the first link help?
Click to expand...
Click to collapse
Error 155 is you did not re lock your bootloader first
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip nameOfFile.zip
18th.abn said:
It just needs to flush it. After the error immediately re run
fastboot flash zip nameOfFile.zip
It will go thru then
---------- Post added at 03:26 PM ---------- Previous post was at 03:03 PM ----------
Error 155 is you did not re lock your bootloader first
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip nameOfFile.zip
Click to expand...
Click to collapse
Right before you posted this, someone from the HTC ONE X forum (older thread) said to try fastboot oem lock then run the setup.exe RUU. It worked! I am all good now, so now I can return to Sprint. Thank you for the help though! I wish I could keep this phone, but again the coverage blows.
can someone make a step by step tutorial on this?
I wanna go back to completely start from scratch!
blacknet101 said:
can someone make a step by step tutorial on this?
I wanna go back to completely start from scratch!
Click to expand...
Click to collapse
the easiest way is to download the first link:
Sprint_HTC_One_m7wls_1.29.651.7_RUU.zip
-extract zip to a folder on your pc
-boot into bootloader (various ways)
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run setup.exe from the extracted folder. it will run the RUU utility & flash back to stock
if you are not familiar w/ adb/fastboot, I just noticed you can use Hasoons all in one toolkit to boot into bootloader & relock bootloader
http://forum.xda-developers.com/showthread.php?t=2236814
O.M.J said:
the easiest way is to download the first link:
Sprint_HTC_One_m7wls_1.29.651.7_RUU.zip
-extract zip to a folder on your pc
-boot into bootloader (various ways)
-using fastboot, type this cmd: fastboot oem lock this will relock the bootloader
-from pc, run setup.exe from the extracted folder. it will run the RUU utility & flash back to stock
if you are not familiar w/ adb/fastboot, I just noticed you can use Hasoons all in one toolkit to boot into bootloader & relock bootloader
http://forum.xda-developers.com/showthread.php?t=2236814
Click to expand...
Click to collapse
i did this and relocked the bootloader but now im stuck on fastboot
it doesnt go passed that, what can i do?
blacknet101 said:
i did this and relocked the bootloader but now im stuck on fastboot
it doesnt go passed that, what can i do?
Click to expand...
Click to collapse
did u run the RUU? more details....

Please help, possible brick after following guide to flash firmware

I was following Vomer's guide on my One, which has been working great. I had HBOOT 1.54, S-Off, SuperCID, and pushed the firmware twice, got the success message, and waited and when it says finished used adb to tell it to reboot. Now I get the splash, with the lock gone, as expected, and then the screen goes black. If I hold power, or power and down, the hardware keys start blinking and then nothing. A few seconds later I get the splash again, then blank again.
It appears to be communicating briefly over USB because my laptop starts trying to install a HTC MTP device (drive is already on the PC and has been fine) before it looses comms and drops out. I can't seem to get adb device to recognize it....
PLEASE tell me someone can help me recover my phone!!! I will be immensely grateful.
And what the HBOOT version you wanted to downgrade to?
Ivanovic said:
And what the HBOOT version you wanted to downgrade to?
Click to expand...
Click to collapse
I wasn't trying to downgrade HBOOT, just rather ensure my firmware was up to date. I'd had mine set up as a GPE and was flashing the DE (after supercid).
By way of an update, I've been able to get into bootloader and I'm a bit scared on what to do next so I dont screw this up. I notice that I still have S-OFF, but HBOOT is now showing 1.56 and it says RELOCKED at the top. My plan was to use rumrunner (just because of the HBOOT, but it is erroring anyway) to unlock bootloader, and then to look up the fastboot commands to push a ROM and recovery. Any advice?
Downgrade to 1.44 and change cid according to the Rom you want. Then unlock or set your bootloader to LOCKED
Here is the file for 1.44 http://www69.zippyshare.com/v/95229262/file.html
Sent from my HTC One using Tapatalk
Can you help me with the adb commands to flash that boot zip? Also, should I run " fastboot flash unlocktoken Unlock_code.bin" to unlock my bootloader first?
vettejock99 said:
Can you help me with the adb commands to flash that boot zip? Also, should I run " fastboot flash unlocktoken Unlock_code.bin" to unlock my bootloader first?
Click to expand...
Click to collapse
You can unlock if you want to flash custom recovery.
Place the file i gave you to the fastboot folder. Boot into bootloader and choose FASTBOOT.
Run the following : fastboot oem rebootRUU
fastboot flash zip filename.zip *where filaname the actual filename of the file i gave you
You will get FAILED or sth so do this command again to succesfully flash the firmware.
Ivanovic said:
You can unlock if you want to flash custom recovery.
Place the file i gave you to the fastboot folder. Boot into bootloader and choose FASTBOOT.
Run the following : fastboot oem rebootRUU
fastboot flash zip filename.zip *where filaname the actual filename of the file i gave you
You will get FAILED or sth so do this command again to succesfully flash the firmware.
Click to expand...
Click to collapse
Awesome. So I've got HBOOT 1.44, S-OFF, bootloader unlocked, supercid, and TWRP 2.6.3.3 flashed again, and I tried sideloading ARHD rom. It all looked good but same thing for the moment, I get the splash and then black......I can't figure out why I can't boot into a rom right now. About to try flashing ROM again.
Okay, so didnt' work. After sideload flashing gets to 100% it just does nothing. Manually rebooting gets me back into the splash then blackness bootloop......
Can you issue fastboot clear cache in bootloader and see the outcome?
Also as you are Soff, you can run dev ruu
SaHiLzZ said:
Can you issue fastboot clear cache in bootloader and see the outcome?
Also as you are Soff, you can run dev ruu
Click to expand...
Click to collapse
The former didn't get me anywhere, but I did follow your thinking and decided to use the RUU and start over. I'm happy to report that got me going, and then I was able to get AR HD on. I probably had to do that all along once I wiped the ROM and recovery, as sideloading clearly wasn't going to work (in retrospect) as it has an AROMA installer.
Thanks so much everyone!!
SaHiLzZ said:
Can you issue fastboot clear cache in bootloader and see the outcome?
Also as you are Soff, you can run dev ruu
Click to expand...
Click to collapse
Nice that everything is solved now.
Verstuurd van mijn HTC One

[SOLVED] [Q] HTC One Doesn't boot, Can't Get Into Bootloader, only Fastboot

Hi guys,
I've searched the entire web (including all the XDA links regarding the HTC One), tried every solution out there and still can't fix my problem. I don't know where else to turn, so I am creating a new thread in XDA Developers.
Originally, I had unlocked my bootloader and rooted the phone to use stock android. A couple days ago, I tried to re-lock the bootloader and change back to the original Sense UI; however, when I did this, I got stuck in a boot loop (the phone kept rebooting and didn't boot into the OS).
I then went back into fastboot and restored all the files and settings.
Now, the only things I can actually go into is fastboot and bootloader (cannot boot into OS or even see the boot screen). The only way the phone can connect to my PC is if I'm in fastboot. When I go into bootloader, the phone disconnects from my PC.
My phone is from Telus in Canada and I can find a couple .zip RUU files on the web for Telus, however when I try to flash the phone using the command "fastboot flash zip filename.zip", I get the error "signature verify fail."
When I tried to use the RUU.exe from BrightStar (developer version), the update failed and there was a message saying to download the original firmware.
The last thing I tried was the command "fastboot oem rebootRUU" (I did this to change the CID and MID, so I could use the Google Play RUU). When I do this, it goes to a black boot screen that has the HTC logo in grey (this is the boot screen I got from trying to use the BrightStar RUU.exe. It was originally a white screen with the HTC logo in green.). When I'm at this screen, I can communicate with the phone using fastboot commands, however when I try to change the CID, I get the error: "status read failed (too many links)," and when I try to change the MID, I get the error: "Command error !!!"
Just to remind you guys, I can only communicate with the phone using fastboot commands. No adb.
I have officially given up and gone crazy! Please Help!!!
*UPDATE* - Sorry, forgot to mention that I've idiotically re-locked the bootloader. Unlocking the bootloader would probably get rid of the "signature verify fail" message. I'm unable to flash the recovery because the bootloader is locked and I can't get into the filesystem because the phone needs to go into the OS for that.
When I try to unlock the bootlader by using "fastboot flash unlocktoken Unlock_code.bin" it gives me the error: "cannot open 'Unlock_code.bin'."
I need to be able to access and make changes to the file system by using fastboot commands and I have no idea how to do this.
*UPDATE #2* - I've managed to re-unlock the bootlader (I didn't have the Unlock_code.bin file in the same directory as the current directory in my cmd window). I've re-flashed the recovery successfully. Now when I reboot, it goes into recovery mode (still can't boot into the OS). I'm using ClockWorks for the recovery.
Now I'm unable to root the phone. I'm trying to write SuperSU v1.65 to the phone by using the command: "fastboot flash zip UPDATE-SuperSU-v1.65.zp" and I get the error message: "remote: not allowed."
I can flash the recovery.img and boot.img (can't flash system.img because there's "not enough space"), but I can't flash .zip files
When I try flashing another boot.img, I still get the same thing. The phone goes to the boot screen and can't boot. Then, it reboots and goes automatically into recovery (I can still get into the bootloader and recovery).
Any suggestions to get past these permissions?
bkhosh2 said:
Hi guys,
I've searched the entire web (including all the XDA links regarding the HTC One), tried every solution out there and still can't fix my problem. I don't know where else to turn, so I am creating a new thread in XDA Developers.
Originally, I had unlocked my bootloader and rooted the phone to use stock android. A couple days ago, I tried to re-lock the bootloader and change back to the original Sense UI; however, when I did this, I got stuck in a boot loop (the phone kept rebooting and didn't boot into the OS).
I then went back into fastboot and restored all the files and settings.
Now, the only things I can actually go into is fastboot and bootloader (cannot boot into OS or even see the boot screen). The only way the phone can connect to my PC is if I'm in fastboot. When I go into bootloader, the phone disconnects from my PC.
My phone is from Telus in Canada and I can find a couple .zip RUU files on the web for Telus, however when I try to flash the phone using the command "fastboot flash zip filename.zip", I get the error "signature verify fail."
When I tried to use the RUU.exe from BrightStar (developer version), the update failed and there was a message saying to download the original firmware.
The last thing I tried was the command "fastboot oem rebootRUU" (I did this to change the CID and MID, so I could use the Google Play RUU). When I do this, it goes to a black boot screen that has the HTC logo in grey (this is the boot screen I got from trying to use the BrightStar RUU.exe. It was originally a white screen with the HTC logo in green.). When I'm at this screen, I can communicate with the phone using fastboot commands, however when I try to change the CID, I get the error: "status read failed (too many links)," and when I try to change the MID, I get the error: "Command error !!!"
Just to remind you guys, I can only communicate with the phone using fastboot commands. No adb.
I have officially given up and gone crazy! Please Help!!!
Click to expand...
Click to collapse
Try command "fastboot erase cache", then try to re-flash an other recovery (recommended : twrp 2.6.3.3)
superbellefleche said:
Try command "fastboot erase cache", then try to re-flash an other recovery (recommended : twrp 2.6.3.3)
Click to expand...
Click to collapse
I'm sorry, but I'm kind of a noob. How exactly do I re-flash a recovery. do I do this using the command: "fastboot flash recovery recovery.img" or should I try "fastboot flash zip filname.zip" (RUU.zip) again?
*UPDATE* - I've tried erasing the cache and re-flashing the recovery and I still get the error message: "signature verify fail."
I'm still waiting for someone to help me. Is anyone going to help me fix my problem or is my HTC One doomed?
If you are on Telus
Download http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Relock your bootloader
Then
fastboot oem rebootRUU
fastboot flash zip RUU_ZIP_M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1_R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336571_signed_2_decrypted.zip
May have to run the flash zip command twice..
SaHiLzZ said:
If you are on Telus
Relock your bootloader
Then
fastboot oem rebootRUU
fastboot flash zip RUU_ZIP_M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1_R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336571_signed_2_decrypted.zip
May have to run the flash zip command twice..
Click to expand...
Click to collapse
I've already tried that. When the bootloader is locked, I get the error: "signature verify fail."
OK.. Unlock bootloader, flash custom recovery, adb push this file: http://www.htc1guru.com/2013/11/guru-reset-3-22-661-1/, and install it from recovery.
SaHiLzZ said:
OK.. Unlock bootloader, flash custom recovery, adb push this file
Click to expand...
Click to collapse
I can't use adb commands...
I have all kinds of USB drivers installed (including the one from SDK Manager). When I type in the command "adb devices", I get nothing.
bkhosh2 said:
I can't use adb commands...
I have all kinds of USB drivers installed (including the one from SDK Manager). When I type in the command "adb devices", I get nothing.
Click to expand...
Click to collapse
adb commands will work if your in twrp recovery
and the reason your ruu.zip failed is because you were not in fastboot oem rebootRUU when you tried them, seems you mixing and matching different forums of flashing .. it don't work like that.
Just to re-iterate..
1. fastboot oem rebootRUU (this will show a gray HTC logo on black screen)
2. fastboot flash zip RUU_ZIP_M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1 _R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336 571_signed_2_decrypted.zip
May have to run #2 again if it shows flush error..
clsA said:
adb commands will work if your in twrp recovery
and the reason your ruu.zip failed is because you were not in fastboot oem rebootRUU when you tried them, seems you mixing and matching different forums of flashing .. it don't work like that.
Click to expand...
Click to collapse
I Installed the TWRP recovery instead of the ClockWorkMod and adb command work! Never using ClockWork ever again!
SaHiLzZ said:
Just to re-iterate..
1. fastboot oem rebootRUU (this will show a gray HTC logo on black screen)
2. fastboot flash zip RUU_ZIP_M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1 _R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336 571_signed_2_decrypted.zip
May have to run #2 again if it shows flush error..
Click to expand...
Click to collapse
I Installed TWRP and went into the TWRP recovery and noticed the adb commands work.
That file didn't work, however the Guru file you mentioned earlier did (with the "adb push" command)! Thanks so much for your help! Everything is working perfectly again!
Thanks for posting back. Edit your title to [SOLVED]! and enjoy!

RUU.exe giving error 155

hi all.
need help.
i wanted to revert back to stock.
followed htc1guru tutorial.
downloaded ruu.exe.
i downgraded to hboot 1.44 write my cid back to htc__044 and on s-off
but after executing .exe im getting error 155.
googled it most of the people posted because they having hboot 1.55, so couldnt find any solution for my case.
any help? thanks a lot.
good day
shdin271 said:
hi all.
need help.
i wanted to revert back to stock.
followed htc1guru tutorial.
downloaded ruu.exe.
i downgraded to hboot 1.44 write my cid back to htc__044 and on s-off
but after executing .exe im getting error 155.
googled it most of the people posted because they having hboot 1.55, so couldnt find any solution for my case.
any help? thanks a lot.
good day
Click to expand...
Click to collapse
try this method
This is the instructions posted by Scotty85
I'm just re-posting it for you
Quote:
http://androidforums.com/t-one-all-t...ml#post5864243
Quote:
here is how you extract rom.zip:
Quote:
the .exe utilities can be finicky,so if you have trouble getting it to run, you can extract "rom.zip" in the following manner:
-start the utility
-check the "i understand" box to move on to the next screen
-hide the utility temporarily out of site
-search your C drive for "rom.zip". you will find it in a temporary location(it will be in a different spot each time you run the utility)
-open the folder location,and transfer rom.zip to a safe location on your PC.
-unhide and cancel the utility,your done with it.
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Quote:
here are some directions to flash "rom.zip"
if you're working with a booted,operational phone,you can flash the file in the following manner:
-open a cmd window
-change to adb/fastboot directory
-place the zip file you want to flash into adb/fastboot directory
-enable usb debug,disable fastboot,plug in phone
-check for connectivity
adb devices (should return serial number)
-boot to fastboot
adb reboot bootloader
-check for connectivity again
fastboot devices
-flash the file
fastboot erase cache
fastboot oem rebootRUU (will put you in ruu mode,black screen silver htc letters)
fastboot flash zip zipfilename.zip (will send and flash the file. don't interrupt it while the cmd window shows its writing's,and the green status bar is moving on the phone screen)
*sometimes a file will fail with a pre-update error. this is normal,just enter again:
fastboot flash zip zipfilename.zip
and this time it will finish
-when you get "finished" and "OK"
fastboot reboot-bootloader (takes you back to fastboot)
-reboot back to the OS
fastbooot reboot
you can use this if you don't have an operational phone as well. you just need to manually put the phone in fastboot(select from hboot menu) then skip the "adb" commands and start with fastboot devices
to answer your other question,yes,you will need to re-unlock and re-install recovery after running the RUU. an ruu is designed as an "unroot" solution, or emergency fix,if other attempts have not made the phone operational.
Click to expand...
Click to collapse
clsA said:
try this method
Click to expand...
Click to collapse
thanks for the reply. i think i missed something in bootloader status (relocked locked)
according to this tutorial http://forum.xda-developers.com/showthread.php?t=2541082, my bootloader should be locked not relocked. i tried it with relocked.
havent tried it yet, but ill hold on for a few days testing my new radio. if the problem persists, ill use this method. again thanks bro.
shdin271 said:
thanks for the reply. i think i missed something in bootloader status (relocked locked)
according to this tutorial http://forum.xda-developers.com/showthread.php?t=2541082, my bootloader should be locked not relocked. i tried it with relocked.
havent tried it yet, but ill hold on for a few days testing my new radio. if the problem persists, ill use this method. again thanks bro.
Click to expand...
Click to collapse
locked and relocked are the same thing

HTC One Stuck on Bootloader

I've accidentally erased everything on my HTC One, including the ROM I had on there and the ROM install file. I am now stuck in the Bootloader screen and only options I have are to enter TWRP v2.6.3.3. Is there a way that I can flash a ROM via USB in the Bootloader? I've tried resetting my phone and it comes up with the HTC logo on the white screen and won't boot.
return to stock rom
Chaos Water2 said:
I've accidentally erased everything on my HTC One, including the ROM I had on there and the ROM install file. I am now stuck in the Bootloader screen and only options I have are to enter TWRP v2.6.3.3. Is there a way that I can flash a ROM via USB in the Bootloader? I've tried resetting my phone and it comes up with the HTC logo on the white screen and won't boot.
Click to expand...
Click to collapse
Restart from scratch find the ruu.exe for your phone make sure it has the right specs of your phone (android,sense,and service provider) once found follow these instructions
1.) Go to Fastboot
2.) Run the commands
fastboot oem lock
fastboot reboot-bootloader
fastboot oem rebootRUU
3.) Run the RUU
The first command locks your bootloader (allowing RUU), the third command allows the RUU to run on your phone without having to actually boot all the way (normally it just boots into this screen for you).
This will put you back to ur stock Rom when rooting again make sure to make backups of everything or you will have same problem again
Make sure you have all the updated drivers for your computer
Chaos Water2 said:
I've accidentally erased everything on my HTC One, including the ROM I had on there and the ROM install file. I am now stuck in the Bootloader screen and only options I have are to enter TWRP v2.6.3.3. Is there a way that I can flash a ROM via USB in the Bootloader? I've tried resetting my phone and it comes up with the HTC logo on the white screen and won't boot.
Click to expand...
Click to collapse
adb works in custom recovery, you can push, sideload, or OTG a ROM to your phone,
check the Frequently Asked Question sticky page 3
smokeytime420 said:
Restart from scratch find the ruu.exe for your phone make sure it has the right specs of your phone (android,sense,and service provider) once found follow these instructions
1.) Go to Fastboot
2.) Run the commands
fastboot oem lock
fastboot reboot-bootloader
fastboot oem rebootRUU
3.) Run the RUU
The first command locks your bootloader (allowing RUU), the third command allows the RUU to run on your phone without having to actually boot all the way (normally it just boots into this screen for you).
This will put you back to ur stock Rom when rooting again make sure to make backups of everything or you will have same problem again
Make sure you have all the updated drivers for your computer
Click to expand...
Click to collapse
A RUU.exe file only requires the bootloader locked if S-ON. When the bootloader is locked, the RUU is executed with a double click in Windows. There is no need to do the other steps in 2, they are only needed if the RUU is a zip file. Here are the steps for flashing RUU.zip:
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
that is true
majmoz said:
A RUU.exe file only requires the bootloader locked if S-ON. When the bootloader is locked, the RUU is executed with a double click in Windows. There is no need to do the other steps in 2, they are only needed if the RUU is a zip file. Here are the steps for flashing RUU.zip:
In bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
Click to expand...
Click to collapse
That is true method is similar but this is how I got my phone to return to stock be for I could go anywhere else I tryed reflashing a recovery it didn't take I even tryed flashing the ruu.zip through fastboot it always failed on me since I couldn't go any further than that I searched other methods of flashing ruu that's what I came across and it worked for me also if you have s-off this usually turns it back on it did for me on step 2 not all of those steps are needed but the last one is what gets the phone ready to receive the info from the ruu.exe being run on a computer

Categories

Resources