[Q] XZ does not boot anymore after CM 10.1 - Xperia Z Q&A, Help & Troubleshooting

Hi!
I just got a Xperia Z from a friend who try to install CM 10.1.
Apparently the bootloader is unlocked, CWM installed. And after the installation of CM, the device does not boot. Sony logo appears after a press on the start button and it turns down instantly.
What did I already try:
- Flash of two official roms with flashtool. The process stops after the progression bar is one fourth filled but nothing tells that the processus failed. But same issue always here, does not boot.
- Re-locked the bootloader with BLU (flashtool) to restore the phone with using Sony updater service : I have an error : "No loader found on this device".
Need your help please

Have you made a factory reset and cache delete before flashing CM? I make this mistake often but with flashtool I can always install back the stock rom.

wesely said:
Have you made a factory reset and cache delete before flashing CM? I make this mistake often but with flashtool I can always install back the stock rom.
Click to expand...
Click to collapse
I'm pretty sure he did a wipe data and wipe cache before the installation.
Flashtool does not repair my phone after a flash of the stock rom, do not know why..
What can I do ?

Do some research about how fastboot works to flash the official XZ kernel through fastboot
Sent from my C6603 using XDA Premium 4 mobile app

rom123s said:
I'm pretty sure he did a wipe data and wipe cache before the installation.
Flashtool does not repair my phone after a flash of the stock rom, do not know why..
What can I do ?
Click to expand...
Click to collapse
Maybe try to flash the CM kernel and go into recovery and flash a other Rom.. I'm not sure if it works but haven't better idea.

Related

Stuck on loading screen

Hi,
using x8 ( 11W07 ),
what i did in the process of installing Jelly Bean;
- Unlock bootloader, success
- Flashtool; success
- Wipe data, etc, dalkiv
- Install ROM & Gapps...
- Reboot system
Everything goes smoothly except currently stuck on the 'android' logo loading screen.
What's the actualy problem. Is this considered soft brick?
Appreciate for the help guys!
slogd3ad said:
Hi,
using x8 ( 11W07 ),
what i did in the process of installing Jelly Bean;
- Unlock bootloader, success
- Flashtool; success
- Wipe data, etc, dalkiv
- Install ROM & Gapps...
- Reboot system
Everything goes smoothly except currently stuck on the 'android' logo loading screen.
What's the actualy problem. Is this considered soft brick?
Appreciate for the help guys!
Click to expand...
Click to collapse
Did you flash the right kernel ?
Vınce said:
Did you flash the right kernel ?
Click to expand...
Click to collapse
All files got it from this official thread;
http://forum.xda-developers.com/showthread.php?t=1789713
Yeah, this is a soft brick.
Use Flashtool to unbrick your phone.
Maybe u flashed wrong kernel. Try again.
Have you formatted /system, /data and /cache in recovery before installation?
If not, go to recovery -> mounts and storage, format /system, /data and /cache and then install the ROM and GApps.
fifo171 said:
Have you formatted /system, /data and /cache in recovery before installation?
If not, go to recovery -> mounts and storage, format /system, /data and /cache and then install the ROM and GApps.
Click to expand...
Click to collapse
I have the same problem but the back botton is not work to get the recovery the can do is to power on the dev. and get stuck on sony ericson logo i try the flashtool but it not work because i need to get into recovery also the adb not work not device found...... HELPPPP :crying:
saley7 said:
I have the same problem but the back botton is not work to get the recovery the can do is to power on the dev. and get stuck on sony ericson logo i try the flashtool but it not work because i need to get into recovery also the adb not work not device found...... HELPPPP :crying:
Click to expand...
Click to collapse
You don't need to be go to recovery to use flashtool.
Install PCC.
Download and install flashtool and install drivers in the drivers folder.
Download stock rom, place it in firmwares folder.
Run flashtool and follow the instructions there.
Sent from my rooted tomato using xda app
Use a seus or pccompanion
Wysłane z mojej X8 przy pomocy NAODroid v0.1.2
Try to revert to stock rom and kernel
Refer to this thread
i always have this problem (stauck on kernel logo) when i flash the rom: i just remove the battery for 10s and then reboot . :good::good:
The OP's problem is that you can't go directly from stock kernel to JB.
First you must flash another custom kernel.. Try alfsV08a CM7 or GDX.
Using it you may format your phone correctly.
Then only may you install the JB kernel then rom.

xperia T orange jamesbond edition

Hello guys, im new here but i need your help.
Like i said i have xperia lt30p and I cant install http://forum.xda-developers.com/showthread.php?t=2040066, dont know why i did everytihing with instruction for locked bootloader and still the same. So my problem is : after installing everything im trying to turn on my xperia and its just vibrate and nothing going on... just one vibration. help me please...
igorskyxxx said:
Hello guys, im new here but i need your help.
Like i said i have xperia lt30p and I cant install http://forum.xda-developers.com/showthread.php?t=2040066, dont know why i did everytihing with instruction for locked bootloader and still the same. So my problem is : after installing everything im trying to turn on my xperia and its just vibrate and nothing going on... just one vibration. help me please...
Click to expand...
Click to collapse
sounds like a kernel issue.
Code:
Locked bootloader
1. Root with Bin4ry's method(*)
2. install CWM for locked bootloaders.(*)
3. Go to recovery, wipe cache & dalvik-cache
4. Flash ROM
5. Flash kernel .140 (if you haven't already)
6. Reboot.
7. When CWM asks "ROM may flash stock recovery on boot. Fix?", answer "No".
8. Enjoy
(*) skip these steps if you're already on a custom ROM with CWM recovery or unlocked bootlader.
Are you sure you did all these?
s
gregbradley said:
sounds like a kernel issue.
Code:
Locked bootloader
1. Root with Bin4ry's method(*)
2. install CWM for locked bootloaders.(*)
3. Go to recovery, wipe cache & dalvik-cache
4. Flash ROM
5. Flash kernel .140 (if you haven't already)
6. Reboot.
7. When CWM asks "ROM may flash stock recovery on boot. Fix?", answer "No".
8. Enjoy
(*) skip these steps if you're already on a custom ROM with CWM recovery or unlocked bootlader.
Are you sure you did all these?
Click to expand...
Click to collapse
yes and not once, i have tried 4 times...
ok, does your phone turn on at all?
If so tell me what it says in the last 4 entries in
settings/about phone.
If it doesn't do a repair using pccompanion then tell me the same thing again
after flashing I cant but always i can "reset" by update service by sony , now its
android ver. 4.1.2
bandwidth version 8960A-AAAAAANAZQ-10015031-47
kernel 3.4.0-g5b05b2-00811-g8c0b35e
[email protected]) ) #1 SMP preempt tue mar 19 12:47:46 2013
And the last line : 91.A.1.140
ok, how are you installing CMW? Which link are you following?
cwm
gregbradley said:
ok, how are you installing CMW? Which link are you following?
Click to expand...
Click to collapse
dropbox.com/s/c4ss88zgnx178ot/CWM4XperiaT_v7i_JB.zip
This one..., im just connecting xperia t with usb debugg ,and via PC click install.bat ,something wrong?
That should be fine.
Next try this.
Flash it again, but this time goto
mouts and storage and make sure you mount system first, then flash it...
EDIT:
Just a thought, after flashing the rom are you wiping system as well as dalvik and cache...if so then D'OH, don't wipe system, that deletes the rom you just installed
after flashing rom? i dont wipe anything , just before flashing
ok
gregbradley said:
That should be fine.
Next try this.
Flash it again, but this time goto
mouts and storage and make sure you mount system first, then flash it...
EDIT:
Just a thought, after flashing the rom are you wiping system as well as dalvik and cache...if so then D'OH, don't wipe system, that deletes the rom you just installed
Click to expand...
Click to collapse
I dont undestand, what do u mean goto mouts and storage and make "SURE you mount system first" ?
enter recovery
goto the section that says
mount and storage
then choose mount system
then flash the rom
will do in 30mins, will say progress here
it still nothing... just vibrating
Redownload the .zip file
Sent from my GT-P3110 using xda app-developers app
yeah,but i think its not .zip problem... I had the same problem with CM 10 ... Maybe I just cant install other roms on my xperia T from orange with blocked bot etc...
You cant install custom kernels but you should be able to install stock based roms.
Are you trying to install a kernel? If so then dont.
Repair in pccompanion, root, install cmw recovery and flash rom.
It should work, if not try a different rom that is stock based
Sent from my GT-P3110 using xda app-developers app
I'll be grateful if u can show me rom which can work on my XPERIA T , I'm not experienced enough to choose stock or not ,sorry for problems..
And if u can say, how i can get flashtool? I will try this one http://forum.xda-developers.com/showthread.php?t=2026885
I have got EMMA but its not avaible for me...
Of coyrse you cant use emma. If you read the instructions its for unlocked bootloaders.
In order to get flashtool just look in the dev section for it.
To decide if a rom is stock based, read the op of the roms thread, it will say what it is based on there.
You should be able to flash my rom if you follow the instructions properly
Sent from my GT-P3110 using xda app-developers app

[Q] Need Help for my Xperia Z1 C6903

I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
NightZeus said:
I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
Click to expand...
Click to collapse
Use this guide first to get root and recovery on .290
Then go to recovery and flash the mondified zip. After flash clear cache and dalvik and reboot. DONE
DO NOT CREATE NEW THREADS FOR SOMETHING THAT HAS BEEN ASKED 100s OF TIMES !!!
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
NightZeus said:
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
Click to expand...
Click to collapse
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
anybody can help me to fix it on team viewer anybody can do that i wanna root my mobile and now its not working anymore guys
NightZeus said:
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
Click to expand...
Click to collapse
This is called a bootloop. All you need to do is press VOL UP + POWER, then connect your phone to your computer in flashmode (connect USB while holding VOL DOWN button) and flash .534 using Flashtool
Yep, just Hold Volume Down, connect to PC and flash a Stock FTF.
shem2409 said:
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
paullu said:
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
Click to expand...
Click to collapse
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
shem2409 said:
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
Click to expand...
Click to collapse
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
paullu said:
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
Click to expand...
Click to collapse
Monxdified, iHackers and all stock based roms don't need a custom kernel (that's why you don't need to be bootloader unlocked to use them)
Just go into your recovery flash the zip. After the zip is flashed you will get an option to clear dalvik and cache.
It is always recommended to do a factory reset before flashing a custom rom, as it might misbehave. You can however try it without factory reset and then if you see that it doesn't work properly just do a factory reset and flash the rom zip again.

Xperia ZR C5503 can't start up while trying root it(10.4.1.B.0.101)

HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
use flashtool and flash a fresh .tft
jing000l said:
use flashtool and flash a fresh .tft
Click to expand...
Click to collapse
thank you very much~~
it did work!
vuckiez said:
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
Click to expand...
Click to collapse
Thank you very much, it does help!!
danyznd123 said:
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
Click to expand...
Click to collapse
Thanks a lot, i tried to flash the stock kernel and it did work !:victory:

N7000 stuck at boot screen

This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
panamera2011 said:
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
Click to expand...
Click to collapse
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
bfürbanane said:
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
Click to expand...
Click to collapse
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
panamera2011 said:
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
Where does it say to install SuperSU? How would that be possible when Android is not booting.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
I'm sorry but it's really strange, never had installation issues with any version of this rom
Have you tried this kernel to install the rom?
https://www.androidfilehost.com/?fid=24052804347829437
Sent from my H60-L02 using Tapatalk
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Sorry but I confused the message with the MIUI 6.2.12 thread [emoji16]
Sent from my H60-L02 using Tapatalk
AutumQueen92 said:
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
Click to expand...
Click to collapse
I tried that. I went to samsung-updates.com and downloaded a version that I believe is compatible with my baseband version. Is there any way to check what baseband version my phone has? Then I flashed with odin and was stuck in a bootloop. I then flashed PhilZ recovery and the boot hangs at the samsung logo.
bfürbanane said:
Is there any way to check what baseband version my phone has?
Click to expand...
Click to collapse
Settings>about phone>
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
The phone is not booting.
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
Doh! sorry not reading what's in front of me. I did once read that you can get phone number via ADB, maybe the same will work for baseband?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
N00b... said:
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
Click to expand...
Click to collapse
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
bfürbanane said:
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
Click to expand...
Click to collapse
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Condox18 said:
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Click to expand...
Click to collapse
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
same problem
bfürbanane said:
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
Click to expand...
Click to collapse
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Condox18 said:
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Click to expand...
Click to collapse
Thanks for the pointer. I subscribed myself to that thread.

Categories

Resources