Database Develop

Which Baseband Works Best For You?

I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.

battery drain is also very dependent on baseband. so do you want the one with best battery drain, best reception or best balance?

the baseband of the latest firmware which is via kies available in you region should be the best

for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch

CastagnaIT said:
for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch
Click to expand...
Click to collapse
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.

EB2012 said:
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.
Click to expand...
Click to collapse
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=

pp910317 said:
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=
Click to expand...
Click to collapse
in which country do you use it ?

texten said:
the baseband of the latest firmware which is via kies available in you region should be the best
Click to expand...
Click to collapse
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.

Joy` said:
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.
Click to expand...
Click to collapse
use a baseband from neighbours country/region or from a branded firmware of your region

base bands
texten said:
use a baseband from neighbours country/region or from a branded firmware of your region
Click to expand...
Click to collapse
Where can i find all baseband file download

zzozozo said:
Where can i find all baseband file download
Click to expand...
Click to collapse
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/

EB2012 said:
in which country do you use it ?
Click to expand...
Click to collapse
china

Many time after update baseband is necessary to wipe data to solve battery drain
GT-i9001 Shadow ROM 2.0.5
Skyhigh Undervolted
ICS Theme
smartassv2 sio i/o
tweaked governator

best modem
texten said:
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/
Click to expand...
Click to collapse
tnx i just download the kpk version and install it (do i need any cash reset?)

pp910317 said:
china
Click to expand...
Click to collapse
KPM and the whole new stock ROM is made for regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

All Stock Rom's:
http://forum.xda-developers.com/showthread.php?t=948790
The usual modems are in the bottom of the 1st post. Worked all fine for me

For you, ZSJV1,,

I'm using XXKPM and it works like a charm for me. Don't know if it's a placebo or not, but i feel the wifi signal better when i'm far from the router, and also 2G is faster. Also calls are better. Less noise.
Sent from my GT-I9001 using xda app-developers app

XXXKPM works good for me, but is very similar to KPL baseband
Da tapatalk

Baseband problem on i9000. running I9000XXJVU
Joy` said:
I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.
Click to expand...
Click to collapse
I lately installed 4.1.2 X-Bean 3.0 , kernel version 3.0.45-Semaphore_JB_2.3.0. I have no network (Mobile network not available). I live in Macedonia T-mobile sim card. How do i fix this problem.
I had cm10 4.1.2 and everything worked fine...
Thanks

flash new baseband

hey
Im currently using apocalypse rom and its running pretty good on my ace.
I read a post saying that its better to install a different baseband (XXKPT)
im abit confused cause on my phone info now it says baseband: S5830NEKT2 and version 2.3.7
but the xxkpt is 2.3.6 ?
so shouldnt the 2.3.7 be a better baseband?

There is no need to change the baseband unless you are having any problems in the rom because of it.
The baseband change referred in the apocalypse thread is for changing the region of the firmware, not the version. You may use 2.3.7 for you region, but if there is any problem with the rom that a reflash or fresh Odin install is not solving, or due to app 2 sd scripts, then you should try a firmware from a different region, it has helped many people.
If the region(firmware's) you are going for has a different version then you have no choice but to downgrade.

ayush29k said:
There is no need to change the baseband unless you are having any problems in the rom because of it.
The baseband change referred in the apocalypse thread is for changing the region of the firmware, not the version. You may use 2.3.7 for you region, but if there is any problem with the rom that a reflash or fresh Odin install is not solving, or due to app 2 sd scripts, then you should try a firmware from a different region, it has helped many people.
If the region(firmware's) you are going for has a different version then you have no choice but to downgrade.
Click to expand...
Click to collapse
thanks for the info. its much clearer now!
i did want to try a different baseband because of the app2sd bugs on the one i have.(with link2sd and amarullz)
It seems quite straightforward to flash another baseband with odin so might give it a go.
is there anyway to bkup the one i have now? or to find a download link? had a quick look on sammobile.com but didnt find the one i currently have(S5830NEKT2)

You can make a cwm backup,but i don't know if it backs up the baseband or not.
i mean if you restore this on another firmware then you will get this baseband back or not, i am not sure about that.

ayush29k said:
You can make a cwm backup,but i don't know if it backs up the baseband or not.
i mean if you restore this on another firmware then you will get this baseband back or not, i am not sure about that.
Click to expand...
Click to collapse
Yes, it does...

I'm not sure to completely understand.... If I choose the baseband of my country (XWKS9) and I flash on my cm7.2 stable official I'll change the firmware also no ?? If yes can you tell me how to change the baseband without change firmware ?
Thanks
Sent from my GT-S5830 with Tapatalk

289jul said:
I'm not sure to completely understand.... If I choose the baseband of my country (XWKS9) and I flash on my cm7.2 stable official I'll change the firmware also no ?? If yes can you tell me how to change the baseband without change firmware ?
Thanks
Sent from my GT-S5830 with Tapatalk
Click to expand...
Click to collapse
Just flash the cwm zip for baseband or also known as modem...it will only change the baseband then...but i don't see much need of doing so because it's seldom that baseband causes problems...

Ryuinferno said:
Just flash the cwm zip for baseband or also known as modem...it will only change the baseband then...but i don't see much need of doing so because it's seldom that baseband causes problems...
Click to expand...
Click to collapse
It is quite rare but its there with the apocalypse rom, somehow the rom +sdext scripts have different compatibility with different basebands.
Sent from my GT-S5830

[Q] No signal after going back to stock

Hi, my phone was stuck on bootloop so I used smartflash and I flashed this baseband 2012-0521-V20s-Baseband/LGP990AT-00-V20s-EUR-XX-MAY-21-2012+0_CP.fls
I then reinsalled the stock rom named BIN_LGP990AT-00-V20g-234-XX-OCT-27-2011-0
and the phone runs fine but I have no signal and I cant get it to come back. Here is my phone info
Android version 2.3.4
Baseband 1035.21_20120521
Kernel 2.6.32.9
Build number GRJ22
LGE version LGP990-V20g
Any suggestions?

ncassambai said:
Hi, my phone was stuck on bootloop so I used smartflash and I flashed this baseband 2012-0521-V20s-Baseband/LGP990AT-00-V20s-EUR-XX-MAY-21-2012+0_CP.fls
I then reinsalled the stock rom named BIN_LGP990AT-00-V20g-234-XX-OCT-27-2011-0
and the phone runs fine but I have no signal and I cant get it to come back. Here is my phone info
Android version 2.3.4
Baseband 1035.21_20120521
Kernel 2.6.32.9
Build number GRJ22
LGE version LGP990-V20g
Any suggestions?
Click to expand...
Click to collapse
Try to flash other baseband

Hi, what baseband do you recommend from this list? http://forum.xda-developers.com/showthread.php?t=1658047
Sorry im not that good with android things

ncassambai said:
Hi, what baseband do you recommend from this list? http://forum.xda-developers.com/showthread.php?t=1658047
Sorry im not that good with android things
Click to expand...
Click to collapse
Flash 0725-V20r normally it work for you

ncassambai said:
Hi, my phone was stuck on bootloop so I used smartflash and I flashed this baseband 2012-0521-V20s-Baseband/LGP990AT-00-V20s-EUR-XX-MAY-21-2012+0_CP.fls
I then reinsalled the stock rom named BIN_LGP990AT-00-V20g-234-XX-OCT-27-2011-0
and the phone runs fine but I have no signal and I cant get it to come back. Here is my phone info
Android version 2.3.4
Baseband 1035.21_20120521
Kernel 2.6.32.9
Build number GRJ22
LGE version LGP990-V20g
Any suggestions?
Click to expand...
Click to collapse
Try some baseband with V20g in name, instead of V20s (different fw combatibility I suppose).
I am using these
LGP990AT-00-V20q-EUR-XX-JAN-24-2012+0_AP FW
LGP990AT-00-V20q-EUR-XX-JAN-24-2012+0_CP BB
BB is 1035.21_2011075
as it was the one the phone came with originally and works well with it. Beware that some FW/BB combination are not working well wor some phones. No pattern, it is individual.

check if your imei is not damaged... sometimes when flash a rom, it can to be damaged
Sent from my GT-I9300 using xda premium

Im trying to get a V20G baseband but I cant find one. Anyone got a link? Ive tried other basebands in the link I said earlier and still no signal.

Please anyone, Im really not that good at this. I need a firmware and baseband download links that match each other but I cant find any.

ncassambai said:
Please anyone, Im really not that good at this. I need a firmware and baseband download links that match each other but I cant find any.
Click to expand...
Click to collapse
TRY THIS. thanks to tonyp for such hardwork and sincerity to O2X community
and never forget to use the search function mate

Baseband vs Region

Hey,
first of, sorry if this has already been asked (and answered..) But I tried my best searching all the sub-forums.
Anywho.
I'm not sure if I am imagining this or not, but after updating to 253 my wireless and cell reception has become worse. Albeit I have quite poor reception in the basement, but the phone looses mobile and/or wireless connection all the time (and I'm positive it didn't do that before, at least).
I have tried both the Indian version and the Swedish version, but they both have the same baseband, i.e 9x15A-ACEFWMAZQ-30110041-23. I am located in Norway, but I figured the baseband will at least be the same for both Sweden and Norway(?). I have not looked at the 'Nordic' version yet tho.
I have not checked if the baseband of 434 and 253 actually differ, but I'm thinking they do. Currently I'm running Carbonrom, so the question is, is it possible to flash just the baseband of 434 onto Carbonrom (provided they're not the same that is..) and should I try to find the Norwegian-specific ftf?
I've been doing nothing but flashing different roms these last days and I think I'm going to cough up hairballs if I have to re-install and customize the rom to my liking, yet again. So I just want to be sure before doing anything (un)risky..
regards,
me

Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium

gm007 said:
Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?

avelon said:
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?
Click to expand...
Click to collapse
Yes you done it correctly but you wont see the difference in "about phone".you need to change some system files to get the right info but not necessary.
All you have to do now is checking if you have better signal and connectivity or not.
Sent from my C6603 using xda premium

[Q] How to update modem baseband when using custom ROM?

Hi,
I'm using Paranoid Android 4.5 Alpha 2 and I wonder how to update modem baseband to latest version without losing my actual configuration and ROM.
Is it possible?
If so, can you tell me how and what do I need.
Thanks by advance

zeduck said:
Hi,
I'm using Paranoid Android 4.5 Alpha 2 and I wonder how to update modem baseband to latest version without losing my actual configuration and ROM.
Is it possible?
If so, can you tell me how and what do I need.
Thanks by advance
Click to expand...
Click to collapse
why do you want to flash baseband?

Because I have issues with phone calls.
So I would like to take advantage of the latest baseband that would maybe fix those.

zeduck said:
Because I have issues with phone calls.
So I would like to take advantage of the latest baseband that would maybe fix those.
Click to expand...
Click to collapse
it might be an operator issue/rom bug.
dont fiddle with the baseband

It's not an operator problem.
So I suppose the problem is from my side (phone).
I used to have a Nexus 4 and ROM and baseband are 2 different things that you can flash independently.
Are you sure it's not the same with Xperia Z?
I already saw some topics with titles like Baseband Generic US something. But I did not find any Generic FR at the latest version.

zeduck said:
It's not an operator problem.
So I suppose the problem is from my side (phone).
I used to have a Nexus 4 and ROM and baseband are 2 different things that you can flash independently.
Are you sure it's not the same with Xperia Z?
I already saw some topics with titles like Baseband Generic US something. But I did not find any Generic FR at the latest version.
Click to expand...
Click to collapse
You can download the french firmware and just flash the baseband from flashtool
Edit: Why dont you try EU firmware

I found out one topic for generic FR latest firmware and I used your trick flashing only the baseband.
Thanks!
Now I will see with the time if it's making my phone work better.

zeduck said:
I found out one topic for generic FR latest firmware and I used your trick flashing only the baseband.
Thanks!
Now I will see with the time if it's making my phone work better.
Click to expand...
Click to collapse
:highfive::good: