Related
I am very sorry for what is certainly a stupid question, but if it is any consolation I DID search and read through threads until my head hurt prior to posting.
1) What is the best way to apply the new OTA 4.2 update for those with rooted Nexus 7 tablet.
With the 4.1.2 update, I blindly installed the OTA update when prompted and didnt realize there was a problem until i tried to access my stickmount USB drive. Luckily the nexus 7 was still unlocked so I didn't need to wipe everything. All i did was re-root it using Nexus Root Toolkit v. 1.5.4. and was back up and running. Is this going to be the same experience with the 4.2 update?
I have installed Voodoo OTA Root keeper v2.0.3 - is this a better route for upgrade instead of re-rooting via the Nexus Toolkit? And if so, how should I use it (do know much about the app).?
2) Is stickmount going to work? And if not, is there a good working alternative for streaming mkv h264 movies to MXPlayer (or other player)?
The main reason I rooted was to access a USB drive for playing movies, TV shows while traveling. We are heading off to Cabo for Thanksgiving and definitely want to be able to access and play movies from my stickmount'ed usb drive. Any suggestions ? Should I just wait to update - and if so is there any way to get the Nexus to stop prompting to install the update all the time?
Thanks in advance to anyone willing to have pity on me...
hinsdale1 said:
I am very sorry for what is certainly a stupid question, but if it is any consolation I DID search and read through threads until my head hurt prior to posting.
1) What is the best way to apply the new 4.2 update for those with rooted Nexus 7 tablet.
With the 4.1.2 update, I blindly installed the OTA update when prompted and didnt realize there was a problem until i tried to access my stickmount USB drive. Luckily the nexus 7 was still unlocked so I didn't need to wipe everything. All i did was re-root it using Nexus Root Toolkit v. 1.5.4. and was back up and running. Is this going to be the same experience with the 4.2 update?
I have installed Voodoo OTA Root keeper v2.0.3 - is this a better route for upgrade instead of re-rooting via the Nexus Toolkit? And if so, how should I use it (do know much about the app).?
2) Is stickmount going to work?
The main reason I rooted was to access a USB drive for playing movies, TV shows while traveling. We are heading off to Cabo for Thanksgiving and definitely want to be able to access and play movies from my stickmount'ed usb drive. Any suggestions ? Should I just wait to update - and if so is there any way to get the Nexus to stop prompting to install the update all the time?
Thanks in advance to anyone willing to have pity on me...
Click to expand...
Click to collapse
1) I just downloaded the OTA 4.2 .zip, copied it to my N7, ran CWM and flashed it. When it asked about keeping recovery and keeping root, I said "yes" and it worked without a problem!
2) Works for me.
volarchico said:
1) I just downloaded the OTA 4.2 .zip, copied it to my N7, ran CWM and flashed it. When it asked about keeping recovery and keeping root, I said "yes" and it worked without a problem!
2) Works for me.
Click to expand...
Click to collapse
Sorry these answers need to be dumb'd down for me
1) If i already have the update downloaded via OTA trying to install itself, is it really easier/necessary to locate the zip you mention, copy it to the N7 (not sure where to copy) and run CWM (not sure what that is or where i get it or how to install it). Is there an easier way to accomplish the update? Perhaps setting the Voodoo Rootkeeper to preserve the root or temporarily unroot.. then just install the downloaded OTA update and then return the root? Or just installing the update and then running the re-root using the Nexus Toolkit (like I did with the 4.1.2 update)?
2) I would like to know more about how you avoided this issue described in this thread here with stickmount not functioning with v4.2 because of the new mulituser framework that causes it no longer to see files in the mounted folders.
Thanks for your help and to anyone else that chimes in... any help is appreciated. Again sorry for being stupid.
hinsdale1 said:
Sorry these answers need to be dumb'd down for me
1) If i already have the update downloaded via OTA trying to install itself, is it really easier/necessary to locate the zip you mention, copy it to the N7 (not sure where to copy) and run CWM (not sure what that is or where i get it or how to install it). Is there an easier way to accomplish the update? Perhaps setting the Voodoo Rootkeeper to preserve the root or temporarily unroot.. then just install the downloaded OTA update and then return the root? Or just installing the update and then running the re-root using the Nexus Toolkit (like I did with the 4.1.2 update)?
Click to expand...
Click to collapse
i tried with OTArootkeeper app. but it don't update.... at restart for installing, it gave a black screen with android in the middle, with a RED icon inside it...... then it restart and 4.1.2 is always there
Perhaps these questions are so rudimentary that they hardly seem worth bothering with - but for some of us, these hacks and the info being thrown around in here are pretty confusing at times. I would be very grateful to anyone with some insight willing to help out?.
i found that this could be a problem with recovery mode... infact if i tr y to restart in recovery, it gave the same error...
i rooted with toolbox, and i'm thinking that it could have removed my recovery... now i'd like to try to recover the stock recovery with the same tool... but i'm not sure about that.
We seem to have veered off topic a bit here (at least for me)... so let me re-post the questions and beg again for mercy from any kind soles who can offer some advice?
1) What is the best way to apply the new OTA 4.2 update for those with rooted Nexus 7 tablet?
With the 4.1.2 update, I blindly installed the OTA update when prompted and didnt realize there was a problem until i tried to access my stickmount USB drive. Luckily the nexus 7 was still unlocked so I didn't need to wipe everything. All i did was re-root it using Nexus Root Toolkit v. 1.5.4. and was back up and running. Is this going to be the same experience with the 4.2 update?
I have installed Voodoo OTA Root keeper v2.0.3 - is this a better route for upgrade instead of re-rooting via the Nexus Toolkit? And if so, how should I use it (do know much about the app).?
2) Is stickmount going to work? And if not, is there a good working alternative for streaming mkv h264 movies to MXPlayer (or other player)?
The main reason I rooted was to access a USB drive for playing movies, TV shows while traveling. We are heading off to Cabo for Thanksgiving and definitely want to be able to access and play movies from my stickmount'ed usb drive. Any suggestions ? Should I just wait to update - and if so is there any way to get the Nexus to stop prompting to install the update all the time?
Thanks in advance to anyone willing to have pity on me...
Bueller...... Bueller...... Bueller?
Hi! Last month I did the 4.1.2 OTA update. I was rooted but on stock. It updated with no problems. I used Voodoo OTA rootkeeper, restored the root, and either renistalled super su, or just updated the binary. Can't remember.....But I did lose my custom recovery. Didn't realize it till tonite when I went to do the 4.2 update.
So to your question. I forced the OTA 4.2 update. And it downloaded. I made sure voodoo rootkeeper was set to save the root. Then let it install. It rebooted. I opened voodoo, restored root, was asked to update super su binary, accepted. Still not rooted till I rebooted.
So far I have root, and am on 4.2 JB. So my goal was to get my custom recovery back on. Install goo manager from market. Open it, go to the settings button top right, it will give you the choice to install open recovery script. TWRP- Then it will ask you twice are you sure you want to do this and reboot? Say yes. Mine did not reboot and it looked like it did nothing. So, I flipped into recovery and Teamwinn recovery was installed. I made a backup, and rebooted.
Good luck!
Thanks for your help. Glad to hear that the OTA 4.2 update should go relatively painlessly (keeping root using voodoo rootkeeper). If you have a minute, I would be grateful if you can just briefly confirm, describe specifically what I need to be checking/configuring in Voodooo (not very familiar with the app) prior to initiating the OS update, I would feel a little more secure before pulling the trigger.
It appears that many apps are still catching up with their own updates, including apparently stickmount (the reason I rooted) to handle the new 4.2 framework so I am thinking best to hold off until after thanksgiving vacation before applying the update.
Thanks again.
hinsdale1 said:
Thanks for your help. Glad to hear that the OTA 4.2 update should go relatively painlessly (keeping root using voodoo rootkeeper). If you have a minute, I would be grateful if you can just briefly confirm, describe specifically what I need to be checking/configuring in Voodooo (not very familiar with the app) prior to initiating the OS update, I would feel a little more secure before pulling the trigger.
It appears that many apps are still catching up with their own updates, including apparently stickmount (the reason I rooted) to handle the new 4.2 framework so I am thinking best to hold off until after thanksgiving vacation before applying the update.
Thanks again.
Click to expand...
Click to collapse
Hi hinsdale,
Have you tried updating to 4.2 yet? Also i heard that if you update SuperSU to version 0.98 the latest version it could cause issues and you will have to reflash the device.
Thanks,
JBIRD
Thanks,
JBIRD
4.2 OTA already loaded, lost root
Hi, I have learned the hard way not to do the OTA upgrade. I just let the 4.2 OTA download when asked to. Now I lost my root that I had on my Nexus7 with 4.1.2. Still unlocked though. What can I do now to root it again and not lose all my apps and data?
I'm a newbie, so please remember that when responding. Thanks.
Hi hinsdale! I am not a techie- I just learn as I go and read, read, read.
So, my voodoo app has 4 checks in the boxes. I seem to remember only 3 boxes checked when I did the update, but I'm not sure. It would make sense that all are checked.
After I updated, I opened the voodoo app first, and there is a box that says restore root. Then it asked if I wanted to update the su binary. Did that, still not rooted according to Tit. BU. Rebooted, then I was rooted. Good luck with your update.
I'm sorry I can't tell you how to run the initial save root on voodoo. I did it a while ago and don't remember, but it was not hard. Very easy.. Just make sure you Read, re- read, and read again before you do any modifications to your tablet. Know the possible bad outcomes, and be prepared to trouble shoot. This site is very good about helping you out if things go wrong. That's why it's a very good idea to be aware of the possible bad outcomes. The only way to know is to READ-READ=READ!
Did I mention READ??? lol. That's how I figure stuff out. If you read about others mistakes, you can avoid them. I also wait a day or 2 to see how it goes for others before I attempt modifications. That includes new roms. You never know what goes wrong until someone is the guinea pig! I am not techie enough to be the guinea pig!
paulie7880 said:
Hi, I have learned the hard way not to do the OTA upgrade. I just let the 4.2 OTA download when asked to. Now I lost my root that I had on my Nexus7 with 4.1.2. Still unlocked though. What can I do now to root it again and not lose all my apps and data?
I'm a newbie, so please remember that when responding. Thanks.
Click to expand...
Click to collapse
same thing here...I tried to use TWRM to flash SU but it seems that after going into recovery using TWRM I can't see any any file or folder on my SD except 3 folders???? Can someone please help us....
YOu will need to search the best way to root again.
How did you root initially?? You may have to do it that way again. Just make sure the method is compatible with 4.2 JB.
sashusmom said:
YOu will need to search the best way to root again.
How did you root initially?? You may have to do it that way again. Just make sure the method is compatible with 4.2 JB.
Click to expand...
Click to collapse
Nexus Root Toolkit
The OTA update downloaded to my cache folder, I moved it to my sdcard. Wouldn't install since I had to fix a couple of files I had edited. So once those 2 files were fixed it installed just fine. Haven't had any issues yet.
The same on here...
But I guess it is better until they fix all this bugs they are reporting.
I'll wait until then.
Sent from my Nexus 7 using xda app-developers app
Updated to 4.2
Hi have updated the nexus to 4,2 and used Voodoo OTA Rootkeeper to keep my root followed the instructions as I did when updated to 4.1.2,my Nexus appears to be rooted superSu is working also stickmount sees the usb but it will not show any files on the sd card any help here please to get it to see the files on the sd card, thanks for your time
Nick
i dont post often as i am usually here looking for help. this time i get to help
i just downloaded and installed 4.2 OTA.
if your nexus was previously unlocked and rooted, it will download and install just fine. however you will lose root, but KEEP the unlocked state.
to root it again, you must goto "about tablet" and tap your build number 7 times to become a developer, this is not a troll, i got this info from another thread on xda.
then using the nexus root toolkit 1.5.4 with modeltype set to "android *.*.* any build", just do the root procedure.
reboot and ur in business, no need to update supersu, and busybox will still be installed already.
Warning: crawrj mentioned this wouldn't flash in TWRP. I use CWM, so not sure whether it's compatible with TWRP (or any other recoveries) at the moment. So, if you're not using CWM... I would suggest waiting a bit.
So as most people know, the new OTA update aims to kill root on the device and the motochopper root method. Once I received the update and saw that it removed root, I immediately set out to figure out what was causing the issue. I also noticed that I was getting the notice about an application performing unauthorized tasks, or something to that effect.
After doing a few file deletions and restores, I finally found the file (KNOXAgent.apk) that was causing the notice about unauthorized actions and needing to restart. I've been running the phone with the MDL update for a little over a week now, and I haven't had another notice. I did lose root during the update, but was able to easily root it again with the motochopper method once the KNOXAgent files were removed.
So, here are the steps I took to avoid losing my root.
1) adb shell
2) su
3) mount -o remount,rw /dev/block/platform/msm_sdcc.1/by-name/system /system
4) rm /system/app/KNOXAgent.*
5) Reboot into recovery and flash the OTA zip provided below. It's the OTA update with the KNOXAgent patches removed from the updater-script. This will allow the update to continue installing without having an error about KNOXAgent not being found on the device.
The same process may have to be done with future OTA updates once KNOXAgent is removed, but it's better than losing your root method each time an OTA comes out. As I mentioned, I've been using this phone since May 13th with this being done. I also had to take out the My Files updates as well, since I have the CyanogenMod file browser (My Files doesn't have root support).
Unfortunately, it seems XDA has problems with filtering spam and requires that you have 10 posts before being able to post external links. Since I don't have anything else to post at the moment, and can't post on the development forums to report problems to developers in order to legitimately increase my count without having to spam threads I don't care about, you'll have to copy and paste the link to get the update package.
Update link: http://d-h.st/Dkl
RogueSly said:
So as most people know, the new OTA update aims to kill root on the device and the motochopper root method. Once I received the update and saw that it removed root, I immediately set out to figure out what was causing the issue. I also noticed that I was getting the notice about an application performing unauthorized tasks, or something to that effect.
After doing a few file deletions and restores, I finally found the file (KNOXAgent.apk) that was causing the notice about unauthorized actions and needing to restart. I've been running the phone with the MDL update for a little over a week now, and I haven't had another notice. I did lose root during the update, but was able to easily root it again with the motochopper method once the KNOXAgent files were removed.
So, here are the steps I took to avoid losing my root.
1) adb shell
2) su
3) mount -o remount,rw /dev/block/platform/msm_sdcc.1/by-name/system /system
4) rm /system/app/KNOXAgent.*
5) Reboot into recovery and flash the OTA zip provided below. It's the OTA update with the KNOXAgent patches removed from the updater-script. This will allow the update to continue installing without having an error about KNOXAgent not being found on the device.
The same process may have to be done with future OTA updates once KNOXAgent is removed, but it's better than losing your root method each time an OTA comes out. As I mentioned, I've been using this phone since May 13th with this being done. I also had to take out the My Files updates as well, since I have the CyanogenMod file browser (My Files doesn't have root support).
Unfortunately, it seems XDA has problems with filtering spam and requires that you have 10 posts before being able to post external links. Since I don't have anything else to post at the moment, and can't post on the development forums to report problems to developers in order to legitimately increase my count without having to spam threads I don't care about, you'll have to copy and paste the link to get the update package.
Update link: d-h.st/Dkl
Click to expand...
Click to collapse
Nice find
travisw0204 said:
Nice find
Click to expand...
Click to collapse
Thanks. It took a bit to find, but I couldn't live without root. My battery is GAWD with the CPU limited. :3
OK I am messing around with this and providing feedback. It doesn't install on the stock recovery for obvious reasons. It doesn't install in TWRP. Gives update binary error. Have to backup my extsd so I can format to fat32 to test other recoveries.
crawrj said:
OK I am messing around with this and providing feedback. It doesn't install on the stock recovery for obvious reasons. It doesn't install in TWRP. Gives update binary error. Have to backup my extsd so I can format to fat32 to test other recoveries.
Click to expand...
Click to collapse
Weird. Flashed for me on CWM when I used it.
RogueSly said:
Weird. Flashed for me on CWM when I used it.
Click to expand...
Click to collapse
Yeah I am guessing it will work in CWM. But I have to backup and format first to test. Which recovery did you use?
crawrj said:
Yeah I am guessing it will work in CWM. But I have to backup and format first to test. Which recovery did you use?
Click to expand...
Click to collapse
I've been using http://forum.xda-developers.com/showthread.php?t=2254323. I tend to stay away from touch recoveries when there are 4 dogs in the house.
Lol, too little too late for me. :facepalm:
Ok it installed on Garwynn's CWM but it didn't install the modem. Is that your results also? Won't install with OUDhs either. Gives error 7. I can confirm that root works without knoxagent installed. That is runny really. We find out right away that knox was causing the security warning. But since the kernel was so widely talked about as being the killer of root we completely overlooked knox as being more than just the alert Thanks for figuring that out.
Edit: Also installs on Agat's recovery but doesn't install the modem.
Edit Again: Ok just as an FYI this no longer is an issue. Chainfire has done it again. His latest SuperSU 1.30 fixes the root issues on MDL. You can use the stock kernel and leave knox alone.
crawrj said:
Ok it installed on Garwynn's CWM but it didn't install the modem. Is that your results also? Won't install with OUDhs either. Gives error 7. I can confirm that root works without knoxagent installed. That is runny really. We find out right away that knox was causing the security warning. But since the kernel was so widely talked about as being the killer of root we completely overlooked knox as being more than just the alert Thanks for figuring that out.
Edit: Also installs on Agat's recovery but doesn't install the modem.
Edit Again: Ok just as an FYI this no longer is an issue. Chainfire has done it again. His latest SuperSU 1.30 fixes the root issues on MDL. You can use the stock kernel and leave knox alone.
Click to expand...
Click to collapse
Awesome! Glad to hear it's fixed. Not sure why the modem didn't install. I didn't get any errors on my device after taking out the patches for My Files and KNOXAgent, as both were missing on my system. I'll try restoring back to MDC and updating to SuperSU 1.3 to test it.
crawrj said:
Ok it installed on Garwynn's CWM but it didn't install the modem. Is that your results also? Won't install with OUDhs either. Gives error 7. I can confirm that root works without knoxagent installed. That is runny really. We find out right away that knox was causing the security warning. But since the kernel was so widely talked about as being the killer of root we completely overlooked knox as being more than just the alert Thanks for figuring that out.
Edit: Also installs on Agat's recovery but doesn't install the modem.
Edit Again: Ok just as an FYI this no longer is an issue. Chainfire has done it again. His latest SuperSU 1.30 fixes the root issues on MDL. You can use the stock kernel and leave knox alone.
Click to expand...
Click to collapse
I was going to ask an annoying question.... but decided it was annoying and did a search. here is what I found in the difference between SuperUser and SuperSU and SuperSU Pro ($2.49). Reference: http://android.stackexchange.com/qu...ruser-from-chainsdd-and-superuser-from-clockw
SuperSU improves everything about Superuser and adds more options. The free version offers faster notifications, there is possibility of disabling them for each app and a new interface, attractive and easy to handle. In addition, according to developer claims by using SuperSU you’ll enjoy higher speed from the apps that require root rights, especially on Android 4.0+. The paid version called SuperSU Pro provides the opportunity to keep root rights after a system update, which usually cancels these rights. Although the method is not guaranteed the option is very useful. We have password protection and advanced log configuration settings for each application.
You might also want to read SuperSU Brings Better SuperUser Root Permission Management to Android. Quoting from that article:
SuperSU is basically SuperUser on steroids. According to the developer, it “allows for advanced management of Superuser access rights for all the apps on your device that need root.”.
Edit: ::FacePalm:: What ever you do. Do not uninstall SuperUser after you install SuperSU. You will loose Root. LOL (Hey at least I can laugh at myself.) I am not worried about it yet... I know I will get it back eventually.
Edit 2: After reading the OP, all you have to do if you have TWRP Recovery installed is do the OTA, your update will install and you will automatically reboot into TWRP.
Go to Mount first and mount System.
Go to back to home and select Advanced.
Go to File Manager. NOTE: This can be very frustrating! Use BACK and Sort Options to reset Sorting if it keeps doing things you don't want it to do. Also (Up A Level) is handy. If you are on "/" directory, touch Sort Descending: Name and you will see System. Select Sysytem.
Now Sort Ascending you will see App. Select App.
Gentally and slowly Swipe down in the middle to reach Knox. I found 2 files. Select one at a time and delete them.
Reboot
Then rerun Motochopper Root method.
I am on Stock MDC still. So if you are on MDL I am not sure if this would work. Now follow the directions that I failed to see when you install SuperSU.
Install SuperSU. Open SuperSU and make sure SU binary is switched from SuperUser to SuperSU. Once you do that you can remove SuperUser.
Edit 3: Once you check to make sure SuperSU has Binary after a reboot... SuperSU will remove SuperUser for you. No need to do anything.
After all said and done... I am thinking that the TWRP stopped the OTA from installing. I have been extremely busy with work, so no time to read XDA lately has been stopping me from keeping up to date. I just need more time in the day.
crawrj said:
Ok it installed on Garwynn's CWM but it didn't install the modem. Is that your results also? Won't install with OUDhs either. Gives error 7. I can confirm that root works without knoxagent installed. That is runny really. We find out right away that knox was causing the security warning. But since the kernel was so widely talked about as being the killer of root we completely overlooked knox as being more than just the alert Thanks for figuring that out.
Edit: Also installs on Agat's recovery but doesn't install the modem.
Edit Again: Ok just as an FYI this no longer is an issue. Chainfire has done it again. His latest SuperSU 1.30 fixes the root issues on MDL. You can use the stock kernel and leave knox alone.
Click to expand...
Click to collapse
Well, crawrj.. I just rawly patched the modem.bin with the modem.img.p, and the baseband version and such still hasn't increased. My software version and baseband version are still showing MDC, while build number is showing MDL. The weird thing about it is the kernel also updated from its original. How does the modem not update when it's being directly flashed onto the partition? Trying to get all of my stuff over to MDL, if that's what it's supposed to be. It has the new boot sound and such, but the inconsistent version numbers make me hesitant that the update fully applied.
RogueSly said:
Well, crawrj.. I just rawly patched the modem.bin with the modem.img.p, and the baseband version and such still hasn't increased. My software version and baseband version are still showing MDC, while build number is showing MDL. The weird thing about it is the kernel also updated from its original. How does the modem not update when it's being directly flashed onto the partition? Trying to get all of my stuff over to MDL, if that's what it's supposed to be. It has the new boot sound and such, but the inconsistent version numbers make me hesitant that the update fully applied.
Click to expand...
Click to collapse
There is some kind of write protection of security that locks the modem down. I have tried 100 different ways of installing the modem and can't. It looks like the official installs are the only ones that work. So right now the ota is the only way to get the modem. But I am sure we will get it figured out in time.
Sent from my SPH-L720 using xda premium
crawrj said:
There is some kind of write protection of security that locks the modem down. I have tried 100 different ways of installing the modem and can't. It looks like the official installs are the only ones that work. So right now the ota is the only way to get the modem. But I am sure we will get it figured out in time.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Well, that sucks. I guess I will give up trying to flash it for now. Already removed KNOXAgent again and dropped faux's kernel on here. It's showing my build as MDL, so at least I don't get pestered by the update message.
aww come on lol too late for me too. I went through hell rooting my phone when i upgraded to MDL. I flashed the stock rom like 3 times before getting my phone rooted and the last piece of the puzzle were the knox files. Instead of deleting the files i froze them using the system tuner off from the playstore after i installed shabbat's custom kernel.
Do we know of a way to avoid all these run arounds to root on MDL by keeping the stock kernel and without removing knox???
tones160 said:
aww come on lol too late for me too. I went through hell rooting my phone when i upgraded to MDL. I flashed the stock rom like 3 times before getting my phone rooted and the last piece of the puzzle were the knox files. Instead of deleting the files i froze them using the system tuner off from the playstore after i installed shabbat's custom kernel.
Do we know of a way to avoid all these run arounds to root on MDL by keeping the stock kernel and without removing knox???
Click to expand...
Click to collapse
I think there are a few posts in the development sections that will help out with getting root on MDL. If it were me, I would just pull the SuperSU apk and unzip it. Grab the su binary out of there, push it to /system/xbin/, and then install SuperSU on the phone once it restarted. Now, I can't confirm that works... because I haven't had to get that dirty with rooting my phone. Motochopper worked perfectly fine when KNOXAgent was removed, so it should work if you have KNOXAgent frozen too.
Cf autoroot
wanna make sure I understand this right. I'm gonna flash this no knox update on top of forcesrom (which has knox removed), I should be ok right? but the modern still not install this way, is that correct? and I won't be able to update my modem until a new method comes out. do I got it all right? thanks! :thumbup::what:
gershee said:
wanna make sure I understand this right. I'm gonna flash this no knox update on top of forcesrom (which has knox removed), I should be ok right? but the modern still not install this way, is that correct? and I won't be able to update my modem until a new method comes out. do I got it all right? thanks! :thumbup::what:
Click to expand...
Click to collapse
That's apparently right, for now. I'm working on figuring out why the MDM partition won't flash. I tried to patch the files manually, as mentioned previously and here, but it seems that it didn't flash as the baseband didn't change?
Hopefully figure it out soon.
Getting E:Error in /external_sd/OTA 5-13-2013 (No Knox Agent), Status 7. Any advice?
So finally Android 4.3 has arrived and our Beloved Nexus 7 is Upgradable Now.....
here is the link to the download of factory Image:
https://developers.google.com/android/nexus/images#nakasijwr66v
Follow this Method and flash the New Android OS...
[GUIDE] Flashing a Factory Image with fastboot / return to stock Thanks @comminus for a great Guide...
Report Back with screenShots and new featuers as well as Bugs because new pudates bring New Bugs.....
The update brought a new bootloader version...android 4.2.2 had 4.18 and 4.3 has 4.23.....
hassam_tariq2003 said:
The update brought a new bootloader version...android 4.2.2 had 4.18 and 4.3 has 4.23.....
Click to expand...
Click to collapse
Did you lose boot loader unlock or root when you installed 4.3? I'm assuming you used fastboot to install not OTA? Just curious...I'll be playing tonight when I get home.
tbonezx11 said:
Did you lose boot loader unlock or root when you installed 4.3? I'm assuming you used fastboot to install not OTA? Just curious...I'll be playing tonight when I get home.
Click to expand...
Click to collapse
You lose root but your bootloader remains unlocked.
Has anyone been able to root 4.3? Tried to root and flash custom recovery with the Nexus 7 toolkit, but I don't think it's working.
mhl12 said:
You lose root but your bootloader remains unlocked.
Has anyone been able to root 4.3? Tried to root and flash custom recovery with the Nexus 7 toolkit, but I don't think it's working.
Click to expand...
Click to collapse
haven't tried it (I'm yet to receive the update) but someone referenced this link: https://plus.google.com/u/0/+Chainfire/posts/WqS2E9kkN1L
he is right.....You loose root but bootloader remains unlocked...
i have heard people say that you do not loose root if you use the OTA Method and your bootloader also remains unlocked....So its your choice its either Fastboot or OTA...
Just use OTA Rootkeeper, you'll be fine.
Just remember kids.
You cannot use an OTA if your ROM is modified in ANY WAY.
Yeah OTA wont work for most people, seeing as they probably have a modified ROM. In any sense, chainfire has a root method that works. I can confirm it working, because I installed it using TWRP
khaytsus said:
Just use OTA Rootkeeper, you'll be fine.
Just remember kids.
You cannot use an OTA if your ROM is modified in ANY WAY.
Click to expand...
Click to collapse
When 4.2.2 came out I had problems updating because my ROM was modified. But someone modified OTA not to check for changes in ROM and it worked.
no OpenGL ES 3.0 for us?
according to http://developer.android.com/:
"OpenGL ES 3.0 is an optional feature that depends on underlying graphics hardware. Support is already available on Nexus 7 (2013), Nexus 4, and Nexus 10 devices."
I am running 4.3 unlocked but I did the one click method for root using nexus tool kit and for some reason it did not work, I have to try again tonight.
Want a single click ADB setup? Go to my thread I've made a Tool for that. No need to download the whole SDK it's just 2MB
http://forum.xda-developers.com/showthread.php?t=2374071
What to know how to easily pull ota link with ADB follow my thread.
http://forum.xda-developers.com/showthread.php?t=2270429
For official nexus 7 windows 7 - 8 driver download them from ASUS site. No trickery needed.
Sent from my SPH-L710 using Tapatalk HD
Team SXTP
So, I played around a bit,
First of all, I did a "clean, unrooted and even locked bootloader install".
So I'm 1000% stock, just to avoid stuff like "maybe root caused it"..
(I locked it because I wanted to go 100% stock, just FYI, I know it's normally not necessary...)
The welcome screen was a bit weird... I got asked 2 times to tick or untick boxes for saving passwords and all that stuff.. (I think they mixed up the new and the old "first boot setup"?)
The Apps and widgets in the drawer were kinda confused, took 2 reboots for them to settle... (Icons disappeared and reappeared.. The widget tab in the drawer threw some widgets in and out, and the previews were mixed up, so dots and a weird sign was the result (as a preview of the widget)...
The initial setup was pretty laggy, but after setting stuff up, until now, yes I can say the performance of the nexus 7 is improved..
First I was like "OH HELL NO" but after the setup and the reboot everything was smooth...
Oh, and the back button was destroyed 1 time, blinked up but didn't go back... I pressed the home button and it worked then.
Edit: And sadly, no new wallpapers in stock... ):
Sent from my Nexus 7 using xda premium
I booted it up, restored my Google Play stuff (flashed a factory image, completely wiped everything from it, so it's clean, I think).
It lagged a lot, so I rebooted it and it still isn't 4.2.2 smooth. Maybe it's just me, I'll see.
Is it just me, or does it feel like the only thing that changed for us is the number in settings menu besides Google Apps?
OpenGL ES as it was already said, doesn't appear to be here for us, not to mention the fact that Miracast had never actually worked on N7 until recently when someone had it ported over.
Has anyone managed to find the link for the OTA yet?
SO I flashed the stock 4.3 kernel on a 4.2.2 rom and discovered that the stock android 4.3 kernel breaks wifi and gps on 4.2.2...
Eregoth said:
Has anyone managed to find the link for the OTA yet?
Click to expand...
Click to collapse
I have literally hours working on that.
Flashed the stock image using fastboot, took like 2 minutes to do, flashed the chainfire root patch and rebooted and restored apps, so far everything is pretty smooth no disappearing apps or icons or buttons, the kernel seems to be quicker, opening websites was quite a bit quicker, one thing I noticed while trying out different browsers was ads opening up new tabs automatically, that's something that's never happened before.
ffaiz.m said:
no OpenGL ES 3.0 for us?
according to http://developer.android.com/:
"OpenGL ES 3.0 is an optional feature that depends on underlying graphics hardware. Support is already available on Nexus 7 (2013), Nexus 4, and Nexus 10 devices."
Click to expand...
Click to collapse
Tegra 3 does not support GLES3. Even Tegra 4 won't, because nvidia are still using their old gpu architecture.
What's the performance like? Better than 4.2 or 4.1?
Sent from my GT-I9300 using xda premium
Background information:
Bought the AT&T version when it came out right away
Got root the first time it was released
Updated root when next update came out ( Didn't know if I need to )
OTA has been Frozen since I got the phone
Is it safe for me? Should I go back to the first version and then update?
Trust me I've read the posts and since I know there have been some issues on the Verizon side I wasn't sure if that was something that was effecting AT&T too. If some one could please give me an explain of that to it would be extremely helpful as I like to know my **** so I can help others.
Thanks
Icon000 said:
Background information:
Bought the AT&T version when it came out right away
Got root the first time it was released
Updated root when next update came out ( Didn't know if I need to )
OTA has been Frozen since I got the phone
Is it safe for me? Should I go back to the first version and then update?
Trust me I've read the posts and since I know there have been some issues on the Verizon side I wasn't sure if that was something that was effecting AT&T too. If some one could please give me an explain of that to it would be extremely helpful as I like to know my **** so I can help others.
Thanks
Click to expand...
Click to collapse
Flash back to stock via RSDLite. Let it boot up. Get your gmail setup.
When the prompt comes up, DL the .54 update. Install.
Root with jcase's new root method.
Or you could just install safestrap. Install a ROM with the camera update and not worry about it until kitkat comes around.
Sent from non rooted motoX :'(
I'm not really interested in updating to another Rom unless it has the touchless controls or something really interesting. Touchless Controls is one of the main reasons I got this phone next to battery life.
Is Safestrap finally settled down? I feel like last time I check there were still messages about bugs and other issues?
matt99017d said:
Flash back to stock via RSDLite. Let it boot up. Get your gmail setup.
When the prompt comes up, DL the .54 update. Install.
Root with jcase's new root method.
Or you could just install safestrap. Install a ROM with the camera update and not worry about it until kitkat comes around.
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
Icon000 said:
I'm not really interested in updating to another Rom unless it has the touchless controls or something really interesting. Touchless Controls is one of the main reasons I got this phone next to battery life.
Is Safestrap finally settled down? I feel like last time I check there were still messages about bugs and other issues?
Click to expand...
Click to collapse
the only rom out for SS that i am aware of is just a ported tmobile rom for vzw phones that has the update built in. Basically it is just the OTA stock rom running on SS. This is what I am using currently. Not sure if it flashable for ATT phones, but I'm sure there is some workaround there. Or maybe the OP on that thread can make a ATT one if you asked him. SS is stable as of now. Haven't had any new updates to it because no one is having any problems currently (at least with moto x devices).
For your question pertaining to options for taking the OTA. There are 4 methods now.
1. SS method described above
2. use the thread called something like "keep root through the OTA." It basically takes the ota without updating the BL so you can still downgrade to your stock original FW that you are on now. It's the same thing as the SS method because SS also does not udpate the BL, but you won't be using SS for this method obviously.
3. you can flash recovery.img (and system.img if you need to) or just RSD, then install pwnmymoto without running it, then take the ota and pwnmymoto will root the phone automatically after the ota is taken. you won't be able to downgrade your FW anymore with this method.
4. you can just take the ota (also must flash or use rsd to take it obviously) and then use jcase's rockmymoto root exploit. This uses adb commands and telnet stuff. Not too difficult but if you are unfamiliar with all of that then it will take at least some reading. There is also a thread out there for windows users that simplifies it pretty well.
For future Kit kat root. it is still up in the air what will happen with that. I chose to use SS because it was easy. quick. and allows me to make nandroids. I also like knowing that I can still flash to original stock FW in case that might be necessarry for getting root on kit kat. This seems less likely now that jcase created a root method for the OTA that is out, but I'm still just playing it safe personally, even if it might be pointless now.
I know there is not much support for the remix, though it's essentially a mini 2...too. I have it s-off and unlocked. I have twrp recovery on it. The all in one utility on one of these threads didn't work well for twrp so I flashed it via fast boot. I've tried running the utility for gaining root but nothing shows up in twrp under sdcard. I have pushed it to another folder, I find it and flash the zip file but even though it says it finished fine, when I reboot nothing is there. Weak sauce2 works fine, but that's just temp. I want permanent root.
That said anyone know how to enable serial/modem communication to cdma/qpst on the remix? I've been trying forever. Im trying to backup the prl.
jobzombi said:
I know there is not much support for the remix, though it's essentially a mini 2...too. I have it s-off and unlocked. I have twrp recovery on it. The all in one utility on one of these threads didn't work well for twrp so I flashed it via fast boot. I've tried running the utility for gaining root but nothing shows up in twrp under sdcard. I have pushed it to another folder, I find it and flash the zip file but even though it says it finished fine, when I reboot nothing is there. Weak sauce2 works fine, but that's just temp. I want permanent root.
That said anyone know how to enable serial/modem communication to cdma/qpst on the remix? I've been trying forever. Im trying to backup the prl.
Click to expand...
Click to collapse
I had the same issue today and was able to chat with the creators of Sunshine. They are super helpful and offer great support for their product. It took me a few tries but I have root. After you flash the latest version of Chainfire's supersu HERE , you have download the app from the playstore.
Not sure if this was related but right before I did the steps above, I switch over the the Nova launcher. One of the creators told me the stock blinkfeed launcher may give issues.
on1wheel said:
I had the same issue today and was able to chat with the creators of Sunshine. They are super helpful and offer great support for their product. It took me a few tries but I have root. After you flash the latest version of Chainfire's supersu HERE , you have download the app from the playstore.
Not sure if this was related but right before I did the steps above, I switch over the the Nova launcher. One of the creators told me the stock blinkfeed launcher may give issues.
Click to expand...
Click to collapse
How exactly did you accomplish it? Did you push su from recovery mode? I've been trying from just regular, ready to make calls, mode. Did you run a script or do it all manually? xbin or bin? I know some people like symbolic links to xbin/su within bin.
jobzombi said:
How exactly did you accomplish it? Did you push su from recovery mode? I've been trying from just regular, ready to make calls, mode. Did you run a script or do it all manually? xbin or bin? I know some people like symbolic links to xbin/su within bin.
Click to expand...
Click to collapse
I flashed the zip I linked above in TWRP recovery. You can connect your phone to a computer or download the supersu from your phone. After it is flashed, go to the play store and download the supersu app. I thought flashing would install the app on my phone but it didn't. After installing the app, pen it and it will prompt to install the binaries. After that I had root.
I'm not sure what you meant by xbin, bin, or symbolic links. I don't deal with any of that.
on1wheel said:
I flashed the zip I linked above in TWRP recovery. You can connect your phone to a computer or download the supersu from your phone. After it is flashed, go to the play store and download the supersu app. I thought flashing would install the app on my phone but it didn't. After installing the app, pen it and it will prompt to install the binaries. After that I had root.
I'm not sure what you meant by xbin, bin, or symbolic links. I don't deal with any of that.
Click to expand...
Click to collapse
OK, thanks. The Zip usually takes care of all that. I was having no success with a the zip file provided in the Windroid toolkit, so I was trying to push the same su that the toolkit downloaded to the phone and was trying it manually. I tried it with the one Weaksauce puts in the xbin folder as well temporarily. Both didn't work. I'll give this a go.
Thank you again!
Your welcome. I didn't use any of the methods you mentioned. I waited for the Sunshine 3 release to work and then tried the newest supersu zip. That did it. Now I'm waiting for a dev to port a rom to the HTC One Remix.
on1wheel said:
Your welcome. I didn't use any of the methods you mentioned. I waited for the Sunshine 3 release to work and then tried the newest supersu zip. That did it. Now I'm waiting for a dev to port a rom to the HTC One Remix.
Click to expand...
Click to collapse
I'm currently working on figuring out how to port it. Doesn't look like it should be too hard, but we'll see.
Txjacob said:
I'm currently working on figuring out how to port it. Doesn't look like it should be too hard, but we'll see.
Click to expand...
Click to collapse
I'll check back regularly. Which rom are you planning on porting. CM?
Successfully unlocked and s-off with sunshine. Then used su installer by the same guys for root yay! Now just waiting for devs to make or either port some Roms for the remix.
diag?
Was anyone able to get diag working on this phone yet?
I'm assuming after root you could use this program to get into usb settings and enable it:
https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite
But could someone confirm?