Database Develop

Can't enter Factory Recovery mode [HELP]

I was trying to install CWM recovery (recovery-clockwork-5.0.2.6-tass) into my Galaxy mini
I entered factory recovery mode and try to install upper file. But the screen blurred immediately......
Now, when i trying to enter factory recovery mode, it show "Downloading" only....
But I can boot into Android OS.
How to fix Recovery mode problem ??
Thanks

i think you are doing wrong you will need to press home + power button to go into recovery mode
but you are going to download mode mode by pressing volume down also

Didn't you see don't use in the title of the thread containing that recovery now try flashing yagya cwm recovery through Odin.because that recovery your talking about isn't good.
EDIT: if cwm now works flash squdzones touch recovery you will find it in original development forum forget what I said before but cwm 5.2.0.6 is not good and it causes problems .
Sent from my GT-S5570 using Tapatalk 2

****..... now cwm recovery is installed.
but can't boot into Android OS...... always reload boot animation.......
any way to solve it....
Thanks

Wipe data cache
Sent from my GT-S5570 using Tapatalk 2

williamlaw said:
****..... now cwm recovery is installed.
but can't boot into Android OS...... always reload boot animation.......
any way to solve it....
Thanks
Click to expand...
Click to collapse
Read my post above it may help .
Sent from my GT-S5570 using Tapatalk 2

Messi10 said:
Wipe data cache
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
i've tried......

hasman1999 said:
Didn't you see don't use in the title of the thread containing that recovery now try flashing yagya cwm recovery through Odin.because that recovery your talking about isn't good.
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
could you post the link here ??

if wiping data is not working then flash the firmware and then cwm recovery by squadzone through odin

now i used odin to recover factory rom

[Q] Boot loop CM 10

After updating to cm-10.1-20121231-NIGHTLY i'm having problems with a boot loop. After rebooting the phone keeps hanging after showing the spinning CyanogenMod logo. From this position i cannot get into recovery-mode or download-mode using the 3-buttons combo. Also the computer won't detect the phone. What can i do to solve this problem?

Can you write down the steps you did to update your ROM?
Sent from my GT-I9000 using xda premium

Svolacius said:
Can you write down the steps you did to update your ROM?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I've updated using the option in "settings"menu and then the "about phone"menu. The possible update were also shown in the notification bar. So i haven't downloaded them and used the recovery-mode.

Try boot into recovery and install zip from sd, navigate to CM update and flash the update again, maybe wipe cache partition and dalvik first. Flashing twice sometimes helps.
Sent from my GT-I9000 using Tapatalk 2

Try these:
*Remove battery.Don't switch on your device.Just go to recovery using button combo and wipe dalvik cache,data.etc.
*If you can't go to recovery.Just go to download mode and flash a bootloader via ODIN( PC).

AnandMuralidhar said:
Try these:
*Remove battery.Don't switch on your device.Just go to recovery using button combo and wipe dalvik cache,data.etc.
*If you can't go to recovery.Just go to download mode and flash a bootloader via ODIN( PC).
Click to expand...
Click to collapse
Thank you for your help. I've managed to reflash my phone and install a new rom.

HELP!! Phone bricked!

EDIT: problem solved

teodor79 said:
hi everyone, i installed thewhisp cyanogenmod 10.1 , then I decided to revert to stock. after i flashed the stock firmware, I tried to boot into recovery to wipe data (if i don't do this i get into bootloop) but when i pressed all buttons, it won't boot in recovery
now i am stuck in bootloop and can't recover it, please help me!
Click to expand...
Click to collapse
Does the phone boot to the galaxy mini 2 screen? If it boots then its not hard bricked
Put the phone in ODIN mode and reflash again the stock firmware. If it still does not boot and you cant get into recovery, flash again the firmware but this time check re partition. You will need the jena or jenad pit. NOTE: THIS WILL WIPE ALL YOUR DATA!!!!!

only wipe data/factory reset & install stock again

No no always when you want to back to the stock ROM you must flash cwm and wipe data/factory and wipe cache and wipe dalvik cache and go to the mounts and storage and wipe everything then go downlaod mode and flash stock then trust me it will be ok
Sent from my GT-S6500 using xda app-developers app

this is probably Samsung bootloader bug, I don't know what's causing that, but you must wipe data before you flash back to stock via Odin

Porobu said:
Does the phone boot to the galaxy mini 2 screen? If it boots then its not hard bricked
Put the phone in ODIN mode and reflash again the stock firmware. If it still does not boot and you cant get into recovery, flash again the firmware but this time check re partition. You will need the jena or jenad pit. NOTE: THIS WILL WIPE ALL YOUR DATA!!!!!
Click to expand...
Click to collapse
i tried to repartition (i also have jena NON-nfc pit), the same result, it boots only in download mode, or android (i got bootloop and vibrate something like beep.........beep beep beep)
TheWhisp said:
this is probably Samsung bootloader bug, I don't know what's causing that, but you must wipe data before you flash back to stock via Odin
Click to expand...
Click to collapse
yeah, it may be
btw, is there anyway to recover? (without samsung center)

I've had the same problem, sometimes it just boots into recovery

TheWhisp said:
I've had the same problem, sometimes it just boots into recovery
Click to expand...
Click to collapse
my last idea is: after flashing stock firmware, it boots into recovery, then into system. It is possible to replace the original "recovery.img" with cwm "recovery.img" in the original system package?

teodor79 said:
i tried to repartition (i also have jena NON-nfc pit), the same result, it boots only in download mode, or android (i got bootloop and vibrate something like beep.........beep beep beep)
yeah, it may be
btw, is there anyway to recover? (without samsung center)
Click to expand...
Click to collapse
Try:
Install stock rom with odin
After installing install CWM or TWRP with odin
When the rom boots connect ur phone to pc and in adb do: adb reboot recovery
Sent from my GT-S6500D using xda app-developers app

Try this: http://forum.xda-developers.com/showthread.php?t=2227982

TheWhisp said:
Try this: http://forum.xda-developers.com/showthread.php?t=2227982
Click to expand...
Click to collapse
thanks alot! it worked! you're a life saver!

Had the same problem, connected the phone to the charger and then I was able to enter CWM Recovery, I wiped data and it worked.

[Q] Unable to boot/Stuck at CM9 after downgrading from CM10

Hi,
My phone is stuck on CM9 after I tried to downgrade from CM10 nightly build to CM9 stable via the CM updater.
I have a Samsung Galaxy Note International N7000, rooted.
Currently its flashing CM9 on the start up page but I am unable to get passed that page.
Please advice on how do I go about to solve this problem.
Update:
I tried to flash it to its original firmware, now it keeps restarting.
Please help me!

Go to philz kernel thread, download newer kernel ".tar" file..flash it using pc odin..after that boot to recovery, make full wipe and flash cm9+gapps.. If it show you status 7 error, flash any cm kernel reboot recovery and again flash cm9+gapps..
Sent from my GT-N7000 using Tapatalk 4 Beta

Now try flashing cm9 or cm10 . .. after flashing do not reboot . . .instead reboot into recovery and flash the same rom. . .and now reboot. . .hope this works. . .
Sent from my GT-N7000 using xda app-developers app

zai89 said:
Go to philz kernel thread, download newer kernel ".tar" file..flash it using pc odin..after that boot to recovery, make full wipe and flash cm9+gapps.. If it show you status 7 error, flash any cm kernel reboot recovery and again flash cm9+gapps..
Sent from my GT-N7000 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I've flashed philz kernel with odin, was successful. However it got stuck on the yellow triangle page when it tries to reboot.
Now my count increases from 2 to 5counts under odin mode.

omytian said:
I've flashed philz kernel with odin, was successful. However it got stuck on the yellow triangle page when it tries to reboot.
Now my count increases from 2 to 5counts under odin mode.
Click to expand...
Click to collapse
philz kernel flashed, do you do next step like i told before?...full wipe and flash rom.. Yellow triangle can easly be remove using triangle away application.
Sent from my GT-N7000 using Tapatalk 4 Beta

zai89 said:
philz kernel flashed, do you do next step like i told before?...full wipe and flash rom.. Yellow triangle can easly be remove using triangle away application.
Sent from my GT-N7000 using Tapatalk 4 Beta
Click to expand...
Click to collapse
i cant load into philz kernel. under odin it says load successful, however when it tries to auto-reboot it does not power up.

omytian said:
i cant load into philz kernel. under odin it says load successful, however when it tries to auto-reboot it does not power up.
Click to expand...
Click to collapse
Reboot to recovery, power+vol up+home button..
Sent from my GT-N7000 using Tapatalk 4 Beta

Help?

Right, to cut a lonnnnng first post story short, basically, rooted my phone yesterday, went well, installed some rooted apps and was having fun, one app, 3D something, from Google Play. it asked me to restart my phone after setting superuser (i thought this was quite weird) anyway i boot locked my phone - got the typical "Samsung GALAXY Note GT-N7000" and the phone woundnt move from there, i can gt into vol+ home and power and vol- home and power still. so after some research i found i had to flash therelivant stock ROM using odin - so i did. and it worked. then at somepoint today my phone got stuck in a boot loop consisting of the GT-N7000 screen then the samsung spash screen. when i do vol+ home power, i get in red text "E:/error%20in%20/data/recovery_last_kernal_log.txt" - what does this mean? and how(if at all) do i fix it?
i have curently re-flashed stock ROM and vol+ home power & "wipedata/factory reset" and so far so good......
any help or shed light would be a great help
Phone is Samsung GALAXY Note GT-N7000

Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium

nokiamodeln91 said:
Flashing the stock rom won't change anything if you have not wiped data. It just restores the system. What rom are you on? JB or ICS? To get everything to factory standards, install philz kernel.
Then boot into Cwm and choose wipe data,-clean before new rom flash.
Once it's done, choose reboot download and flash the rom again with odin. This way anything that the "3d something" might have done will go.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
it was called "Chainfire3d" and could you write the bove in steps?
i currently have flashed stock JB rom... and its working for now, but i dont want to turn it off incase it loops again. so what should i do from here, its currently un-rooted...
thanks a million for your reply

1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium

nokiamodeln91 said:
1. Install philz kernel from recovery.
2. Boot into Cwm recovery and choose clean before new rom install.
3. Choose reboot download.
4. Connect to pc and flash rom using odin.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
so put philz kernel on the ext sdcard
vol+ home power - and install
boot into cwm and choose clean before new rom install
reboot into download
and then flash stock rom?
one last question... will the lastest philz kernel work?
thanks again

i currently have PhilZ-cwm6-XXLT4-OXA-4.93.6-signed on my external sd.... will this do?

yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.

nokiamodeln91 said:
yeah any kernel will do as you just need recovery... once the kernel is installed, boot into recovery.. You should see CWM based recovery.
Click to expand...
Click to collapse
and then clean before new rom install?

xDEADFAMOUSx said:
and then clean before new rom install?
Click to expand...
Click to collapse
yes if you got the philz recovery installed.