I am trying to install the 4.3 from http://forum.xda-developers.com/showthread.php?t=2467607
I am running 4.1.2 stock rooted & s-on with TWRP 2.6.3 installed. Software version 1.31.651.2
When I try to use fastboot to install the 4.3 I get a fail during one part of the process.
C:\android\sdk\platform-tools>Fastboot flash zip firmware.zip
sending 'zip' (1131141 KB)...
OKAY [ 46.345s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 62.028s
I have loaded the latest HTC usb drivers & the latest Android SDK.
Do you have s-off?
Sent from my HTCONE using xda app-developers app
Konfuzion said:
Do you have s-off?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
No at the moment I am S-ON. Never saw the need for that change as all I wanted was root for certain apps.
Well I guess now you have a need for s-off, I have never understood why people don't just do it incase they do need it.
There is a post in the Sprint HTC one general section for s-off on 1.31 see if that helps you.
Sent from my HTCONE using xda app-developers app
No I ran into the same issue and trying to run on a device that is s-off...
Searching for the 1.31 stock recovery so I can try to run the OTA that way...
MG
moregadget said:
No I ran into the same issue and trying to run on a device that is s-off...
Searching for the 1.31 stock recovery so I can try to run the OTA that way...
MG
Click to expand...
Click to collapse
I was finally able to flash the whole rom in TWRP and then had to flash the new radio from this site http://forum.xda-developers.com/showthread.php?t=2467607
I had to reflash SuperSU to keep my root but now everything looks good. I need to run it for a couple days now and see how I like it. With s-on I will not be able to downgrade but I how that doesn't become an issue.
Related
Hello Bro
My HTC One is bricked over a week, and I tried many times to flash custom rom but still not work.
I downloaded a lot of RUU file.
Only below file can pass the signature check. however, it failed in model check.
I don't know how to modify the RUU although I checked the message about ruuveal.
Anyone can help me, please!
RUU_M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A. 14.3250.13_10.33.1150.01_release_312087_signed_2_4 .zip
sending 'zip' (1029979 KB)...
OKAY [ 39.500s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 169.820s
C:\Users\WalterCheng\Desktop\One_All-In-One_Kit_v3.1\One_All-In-One_Kit_v\data>^
^A
You need to change your cid to super cid. If you are not soff you may better to flash you phones ruu
Sent from my HTC One using XDA Premium 4 mobile app
Android The Greek said:
You need to change your cid to super cid. If you are not soff you may better to flash you phones ruu
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for reply. My phone is bricked, seem I cannot s-off while looping in bootloader mode?
You can flash your own ruu though
That's the error you are getting it's saying you have the wrong ruu id number. What is the cid if your phone? Try flashing that ruu
Sent from my HTC One using XDA Premium 4 mobile app
Android The Greek said:
You can flash your own ruu though
That's the error you are getting it's saying you have the wrong ruu id number. What is the cid if your phone? Try flashing that ruu
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my phone cid is HTC_622, however, I cannot find the RUU with correct signature for CID cid HTC_622.
Sorry to hear that
Sent from my HTC One using XDA Premium 4 mobile app
I was getting ready to update to 4.3 by updating the firmware on my phone. Upon updating to the 3.04 firmware I realized that my screen would not respond. I'm s-off and thought I would just run 1.29's RUU but I get this error every time.
sending 'zip' (1032712 KB)...
OKAY [ 46.061s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 46.325s
Chepo:android Chepo$
Click to expand...
Click to collapse
If any one can help me out that would be appreciated!
Idea???
Chep0 said:
I was getting ready to update to 4.3 by updating the firmware on my phone. Upon updating to the 3.04 firmware I realized that my screen would not respond. I'm s-off and thought I would just run 1.29's RUU but I get this error every time.
If any one can help me out that would be appreciated!
Click to expand...
Click to collapse
I am am in no way any kind of pro...but I think you need to have S on and you can do that with an app called moonshine or revone...I think...Look in to getting your s back on
raykartell said:
I am am in no way any kind of pro...but I think you need to have S on and you can do that with an app called moonshine or revone...I think...Look in to getting your s back on
Click to expand...
Click to collapse
I thought I needed S-off in order to run the RUU process?
I'm wondering if I can just fastboot flash zip firmware.zip a 1.29.651.10 firmware in order to get my screen working again?
Chep0 said:
I was getting ready to update to 4.3 by updating the firmware on my phone. Upon updating to the 3.04 firmware I realized that my screen would not respond. I'm s-off and thought I would just run 1.29's RUU but I get this error every time.
If any one can help me out that would be appreciated!
Click to expand...
Click to collapse
All you need is the latest version of TWRP. If you do some reading the latest firmware isn't compatible with TWRP 2.5.0.0
So you need 2.6.3.0 (I think it's the number) download it and connect your phone in fastboot and the command you use is fastboot flash recovery (recovery name here)
Sent from my HTCONE using xda app-developers app
The S-Off process is a requirement to be allowed to DOWNGRADE your firmware through an RUU process. Do not S-On. Why not just go ahead and run the full RUU as an executable file through your computer? Much easier that way.
Sent from my HTCONE using Tapatalk 4
Konfuzion said:
All you need is the latest version of TWRP. If you do some reading the latest firmware isn't compatible with TWRP 2.5.0.0
So you need 2.6.3.0 (I think it's the number) download it and connect your phone in fastboot and the command you use is fastboot flash recovery (recovery name here)
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Yes I did read that 2.6.3 had to be installed before moving up to 4.3 which I did, but in a moment of desperation I thought my backup would save the day but in reality it took me back to 2.5.5 and made things worst. So now my recovery is also unresponsive.
So I tried updating TWRP via fastboot but got this
sending 'recovery' (8608 KB)...
OKAY [ 1.168s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.202s
Click to expand...
Click to collapse
Is it not allowing it to update because I am no longer unlocked? (Locked the bootloader while attempting to run RUU)
EPayne123 said:
The S-Off process is a requirement to be allowed to DOWNGRADE your firmware through an RUU process. Do not S-On. Why not just go ahead and run the full RUU as an executable file through your computer? Much easier that way.
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
I'm running a mac.. If I don't fix this soon I might just run to a friends house, does that have a higher chance of succeeding?
Just flash the latest recovery. Or I am not understanding the problem.
Sent from my HTCONE using xda app-developers app
---------- Post added at 07:56 PM ---------- Previous post was at 07:38 PM ----------
I guess I replied as you were typing your only hope might be this guide is there is no RUU for 4.3 yet http://forum.xda-developers.com/showthread.php?p=44243635
Sent from my HTCONE using xda app-developers app
EPayne123 said:
The S-Off process is a requirement to be allowed to DOWNGRADE your firmware through an RUU process. Do not S-On. Why not just go ahead and run the full RUU as an executable file through your computer? Much easier that way.
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
Got it to work, running over to my friends house to use his Windows did the trick! Thank you all!
so I took my sprint htc one with viperone loaded and did an ruu back to 4.3 version wiping everything, I successfully got my over the air update to 4.4.2 and decided I'd try to back down to 4.3 so I could restore my twrp viper backup however twrp won't flash currently and I think I caused issues with my bootloader. Since there is no 4.4.2 ruu available yet and I can still get to bootloader, but not recovery, I think I'm still not completely bricked. I've tried a factory restore but I end up at the white screen with green htc letters and it never goes further. Could flashing the 4.4.2 stock recovery fix my issue?
Any attempt to do manual ruu flash, fastboot flash zip rom.zip, fails with this message
target reported max download size of 1514139648 bytes
sending 'zip' (1082662 KB)...
OKAY [ 53.293s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 68.408s
current revs
m7_wls pvt ship s-on rh
hboot-1.56.0000
radio-1.00.20.1108
os-4.06.651.4
at this point I'd just like it to boot to android, any help would be greatly appreciated.
Thanks
Lock bootloader and run the latest ruu
Sent from my HTC One using Tapatalk
elvisypi said:
Lock bootloader and run the latest ruu
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks for responding, I think I'ved tried every combination of locked and unlocked bootloaders but hey what have I got to lose at this point.
ran fastboot oem lock
ran latest ruu I could find, RUU_M7_WL_JB43_SENSE50_SPCS_MR_Sprint_WWE_3.04.651.2_Radio_1.00.20.0913_3_NV_SPCS_4.38_003_release_335355_signed_2.exe
I get error [155] unknown error
this worked to flash from viper one then take all the OTA updates to 4.4.2 but now I get this 155 error
I think I have to wait for the 4.4.2 ruu to be released to get back to a fully functioning but I wanted to check around.
You could try this... http://forum.xda-developers.com/showthread.php?t=2634256
[Guide] How to Downgrade from KK to JB S-OFF Required
jstn76rs said:
You could try this... http://forum.xda-developers.com/showthread.php?t=2634256
[Guide] How to Downgrade from KK to JB S-OFF Required
Click to expand...
Click to collapse
yeah I was starting there originally but getting s-off on 1.56 isn't possible yet.
InvaderSkooge said:
yeah I was starting there originally but getting s-off on 1.56 isn't possible yet.
Click to expand...
Click to collapse
AFAIK that's not correct. Try firewater http://firewater-soff.com
Sent from my HTC One using Tapatalk
elvisypi said:
AFAIK that's not correct. Try firewater http://firewater-soff.com
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
looks like firewater requires being able to boot into android and I can't get past the white screen with green HTC letters, I can get into the bootloader and fastboot but can't get further than that.
btw I really do appreciate the comments and suggestions, I feel like I'm just being negative and shooting each one down but I really am trying them as you post them before replying just in case I've missed something.
I can understand the older ruu versions failing as it won't let you downgrade firmwares with s-on but I'd think that some of the posted roms would work. is it possible to extract the boot and recovery from a 4.4.2 upgraded handset for flashing on another?
InvaderSkooge said:
looks like firewater requires being able to boot into android and I can't get past the white screen with green HTC letters, I can get into the bootloader and fastboot but can't get further than that.
Click to expand...
Click to collapse
Reflash the latest TWRP and than flash a 4.4.2 rom, I don't see why it shouldn't work. If you really messed up(flashed some gsm rom or whatever) you'll probably have to wait for the 4.4.2 ruu to come out
Sent from my HTC One using Tapatalk
elvisypi said:
Reflash the latest TWRP and than flash a 4.4.2 rom, I don't see why it shouldn't work. If you really messed up(flashed some gsm rom or whatever) you'll probably have to wait for the 4.4.2 ruu to come out
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
ok I'm an idiot, thanks for bearing with me here, I had tried twrp load again several times, using 2.6.3.3 instead of 2.6.3.0....
InvaderSkooge said:
ok I'm an idiot, thanks for bearing with me here, I had tried twrp load again several times, using 2.6.3.3 instead of 2.6.3.0....
Click to expand...
Click to collapse
There is no twrp 2.6.3.3 for Sprint
I'm trying to get back to complete stock to grab OTAs for my HTC One m8. I have s-off and I was following the guide here http://venomroms.com/viperonem8_3-0-0-requirements/ and while following the guide and looking for my Main version number and CID Number the MainVer showed up as empty and my CID Number as SPCS_001. The CID does not match anything from here http://forum.xda-developers.com/showthread.php?t=2701376 What should I do next?
Use this guide:
http://forum.xda-developers.com/showthread.php?t=2826343
You'll need the latest RUU which can be found in the first post in the thread linked below. You can use the RUU for software version 3.31.651.2.
http://forum.xda-developers.com/showthread.php?t=2729173
I would also suggest sticking to the Sprint section.
You may do something to your phone that is not for the Sprint variant and really mess up your phone.
Magnum_Enforcer said:
Use this guide:
http://forum.xda-developers.com/showthread.php?t=2826343
You'll need the latest RUU which can be found in the first post in the thread linked below. You can use the RUU for software version 3.31.651.2.
http://forum.xda-developers.com/showthread.php?t=2729173
Click to expand...
Click to collapse
Sorry I need more help the guide you sent me to is very confusing however, I understand that I need to use the RUU to go back to stock rom but which stock recovery do I install?
sadway15 said:
Sorry I need more help the guide you sent me to is very confusing however, I understand that I need to use the RUU to go back to stock rom but which stock recovery do I install?
Click to expand...
Click to collapse
Ruu is used through a pc
sadway15 said:
Sorry I need more help the guide you sent me to is very confusing however, I understand that I need to use the RUU to go back to stock rom but which stock recovery do I install?
Click to expand...
Click to collapse
The RUU will install the stock recovery. If you need info on how to run a RUU click the second link in my sig and read the RUU section.
Magnum_Enforcer said:
The RUU will install the stock recovery. If you need info on how to run a RUU click the second link in my sig and read the RUU section.
Click to expand...
Click to collapse
Okay so I think I get it now please confirm, I run the RUU with my PC then once its finished put the stock recovery corresponding to the RUU I installed in the phone then install the stock recovery using TWRP in my phone then I will have a stock htc rom with stock recovery and the phone will update from there.
sadway15 said:
Okay so I think I get it now please confirm, I run the RUU with my PC then once its finished put the stock recovery corresponding to the RUU I installed in the phone then install the stock recovery using TWRP in my phone then I will have a stock htc rom with stock recovery and the phone will update from there.
Click to expand...
Click to collapse
The RUU will put you back to completely stock...only difference is your bootloader will say ***RELOCKED*** instead of ***LOCKED***
BD619 said:
The RUU will put you back to completely stock...only difference is your bootloader will say ***RELOCKED*** instead of ***LOCKED***
Click to expand...
Click to collapse
Complete stock meaning stock rom and stock recovery right? Also what will happen if my bootloader is locked/unlocked?
sadway15 said:
Complete stock meaning stock rom and stock recovery right? Also what will happen if my bootloader is locked/unlocked?
Click to expand...
Click to collapse
Correct.
You will need to re-lock your bootloader to run the RUU if you are s-on, if s-off no need to re-lock.
BD619 said:
Correct.
You will need to re-lock your bootloader to run the RUU if you are s-on, if s-off no need to re-lock.
Click to expand...
Click to collapse
I'm trying to get to stock too but I'm s-on, besides locking the bootloader is there anything else I need to modify?
guissepi said:
I'm trying to get to stock too but I'm s-on, besides locking the bootloader is there anything else I need to modify?
Click to expand...
Click to collapse
No, just relock and run the RUU.
Magnum_Enforcer said:
No, just relock and run the RUU.
Click to expand...
Click to collapse
I tried relocking and when I ran the RUU this was the output:
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
guissepi said:
I tried relocking and when I ran the RUU this was the output:
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
Click to expand...
Click to collapse
Which RUU are you trying to run? Are you on Windows, and why are you trying to fastboot flash it? If you're on Windows simply double-click the RUU to start the installer. It's a exe file, unless you've pulled the ROM zip from the RUU file.
Also, since you've started a separate thread regarding this same issue, I would stick to it to minimize any confusion instead of posting back & forth. Makes it easier to keep up with what's going on
it's the non-hk from htc's page I'm on mac but I pulled the zip from the exe using parallels desktop, I could try doing it on parallels desktop with the windows exe though
So for some reason my old HTC One M7 has TWRP but no OS installed?
I am selling it so was hoping to get Stock back onto it but not sure where to begin as it has no OS and no external Sdcard to move a ROM onto.
Some information,
UNLOCKED
CID-11111111
version- 6.09.401.10
S-OFF.
kiliimanjaro said:
So for some reason my old HTC One M7 has TWRP but no OS installed?
I am selling it so was hoping to get Stock back onto it but not sure where to begin as it has no OS and no external Sdcard to move a ROM onto.
Some information,
UNLOCKED
CID-11111111
version- 6.09.401.10
S-OFF.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2317986
Sent from my HTC One using XDA Free mobile app
kiliimanjaro said:
So for some reason my old HTC One M7 has TWRP but no OS installed?
I am selling it so was hoping to get Stock back onto it but not sure where to begin as it has no OS and no external Sdcard to move a ROM onto.
Some information,
UNLOCKED
CID-11111111
version- 6.09.401.10
S-OFF.
Click to expand...
Click to collapse
Your s-off so you can just use an ruu.exe
You will need to downgrade the firmware first but then flash an ruu to return to stock. All can be done from the bootloader using fastboot.
If you want 100% stock see this guide http://forum.xda-developers.com/showpost.php?p=47794190&postcount=3
I'm running OSX is there a Mac RUU program?
Sent from my Xperia Z3C using XDA Free mobile app
kiliimanjaro said:
I'm running OSX is there a Mac RUU program?
Sent from my Xperia Z3C using XDA Free mobile app
Click to expand...
Click to collapse
use a ruu.zip or restore your phone using the 6.09.401.10 nandroid backup
https://www.androidfilehost.com/?fid=95832962473396068
alray said:
use a ruu.zip or restore your phone using the 6.09.401.10 nandroid backup
https://www.androidfilehost.com/?fid=95832962473396068
Click to expand...
Click to collapse
Thank you. The problem I was encountering was that I needed to relock my bootloader.
I have installed stock but I see another problem. The android version is 4.1.2. with Sense 5.0 and there are no OTA updates available.
Is there a way that I can enable my OTA updates again?
kiliimanjaro said:
Thank you. The problem I was encountering was that I needed to relock my bootloader.
I have installed stock but I see another problem. The android version is 4.1.2. with Sense 5.0 and there are no OTA updates available.
Is there a way that I can enable my OTA updates again?
Click to expand...
Click to collapse
wait you said you were on 6.09.401.10 at post #1, so you have flashed the 1.28.401.7 ruu?
alray said:
wait you said you were on 6.09.401.10 at post #1, so you have flashed the 1.28.401.7 ruu?
Click to expand...
Click to collapse
If he's not getting updates he most likely flash the beta 1.20.401.x RUU
kiliimanjaro said:
So for some reason my old HTC One M7 has TWRP but no OS installed?
I am selling it so was hoping to get Stock back onto it but not sure where to begin as it has no OS and no external Sdcard to move a ROM onto.
Some information,
UNLOCKED
CID-11111111
version- 6.09.401.10
S-OFF.
Click to expand...
Click to collapse
you can try RUU to solve this problem
alray said:
wait you said you were on 6.09.401.10 at post #1, so you have flashed the 1.28.401.7 ruu?
Click to expand...
Click to collapse
I' m not sure lol. The one that you linked me refused to work so I got one off of the htc1guru website that matched my version number and that one worked instead. I maybe clicked on the wrong link and downloaded the wrong version if you think it is the wrong one, this is the file name.
RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
kiliimanjaro said:
I' m not sure lol. The one that you linked me refused to work so I got one off of the htc1guru website that matched my version number and that one worked instead. I maybe clicked on the wrong link and downloaded the wrong version if you think it is the wrong one, this is the file name.
RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
Click to expand...
Click to collapse
flash this one ..it will update
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
clsA said:
flash this one ..it will update
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
Click to expand...
Click to collapse
Thank you.
Shall I do it in the same fashion as I did with the previous one?
P.s. that file is an .exe
kiliimanjaro said:
I' m not sure lol. The one that you linked me refused to work so I got one off of the htc1guru website that matched my version number and that one worked instead. I maybe clicked on the wrong link and downloaded the wrong version if you think it is the wrong one, this is the file name.
RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
Click to expand...
Click to collapse
You must use the 1.28.401 or you'll never get ota update
---------- Post added at 10:43 AM ---------- Previous post was at 10:38 AM ----------
kiliimanjaro said:
Thank you.
Shall I do it in the same fashion as I did with the previous one?
P.s. that file is an .exe
Click to expand...
Click to collapse
You can find the 1.28.401 zip on htc1guru so you can flash it like you did with fastboot
or use the 1.28.401.7 ruu.exe using windows 7
alray said:
You must use the 1.28.401 or you'll never get ota update
---------- Post added at 10:43 AM ---------- Previous post was at 10:38 AM ----------
You can find the 1.28.401 zip on htc1guru so you can flash it like you did with fastboot
or use the 1.28.401.7 ruu.exe using windows 7
Click to expand...
Click to collapse
Getting this error when trying to flash the .zip.
Unknown-8c-29-37-e8-45-98latform-tools Brandan$ ./fastboot flash zip /Users/Brandan/Desktop/RUU\ Zip\ M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.zip
sending 'zip' (316272 KB)...
OKAY [ 12.369s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 12.561s
kiliimanjaro said:
Getting this error when trying to flash the .zip.
Unknown-8c-29-37-e8-45-98latform-tools Brandan$ ./fastboot flash zip /Users/Brandan/Desktop/RUU\ Zip\ M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.zip
sending 'zip' (316272 KB)...
OKAY [ 12.369s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 12.561s
Click to expand...
Click to collapse
are you booted in ruu mode?
alray said:
are you booted in ruu mode?
Click to expand...
Click to collapse
I am yes, I think the problem is that the file is 990MB but for some reason my download keeps stopping at 330MB thus the file being incomplete.
Is there another link for the .zip file other than htc1guru? Theirs for some reason won't seem to download fully for me.
kiliimanjaro said:
I am yes, I think the problem is that the file is 990MB but for some reason my download keeps stopping at 330MB
Click to expand...
Click to collapse
Of course it will not work, you should always check the md5 value after downloading the file so you can confirm its not corrupted.
Here is another link from androidfilehost.com
https://www.androidfilehost.com/?fid=23329332407584993
md5: 9f83fa36f7d800166401f161dc25db4b
alray said:
Of course it will not work, you should always check the md5 value after downloading the file so you can confirm its not corrupted.
Here is another link from androidfilehost.com
https://www.androidfilehost.com/?fid=23329332407584993
md5: 9f83fa36f7d800166401f161dc25db4b
Click to expand...
Click to collapse
That worked 100% perfectly! Thank you so much! You are a saviour
kiliimanjaro said:
That worked 100% perfectly! Thank you so much! You are a saviour
Click to expand...
Click to collapse
you are welcome