Hi all,
Is anyone using a gear watch with a note one (n7000) and if you are have you found a custom rom that works with gear manager (so notifications are received on the watch)?
If not can someone point me in the right direction. Gear manager requires Android 4.3+ and touchwiz to work.
The reason I ask is I have a gear watch but I have lost my note 2 :crying: (no insurance) and cant afford to replace it just yet so I am using a note 1 until I can afford an upgrade to a note 3. I have searched this forum and the gear forum but cant see any mention of a note one and gear being used together.
Any advise will be appreciated.
Thanks
Richard
Hey Guys,
I want to know if anyone has tried various Kernels ( and custom ROM combo) with their Samsung Galaxy S6 Edge & Gear VR Innovator? I'm wanting to know if it's justified to root my S6 edge in an attempt to help with the overheating issue. I start getting the overheating message within about 20-30 min's of use.
I've been using TheraPearl Pals freezer ice packs with a couple of rubber bands to attach to my Gear VR to help with the overherating (see image below). With these (I have a few in the freezer) I get a little over 1 hour use per ice pack. They are small and light and really don't add much to the weight of the Gear VR. I just don't like having to rely on ice packs as a solution to the S6 overheating issue.
I would love any thoughts from the XDA members to this.
Hi, I don't think custom ROM works with Gear VR.
P.S. for S6 and S6 Edge that is.
Now that Note 5 is officially announced, I am trying to find some official/semi-official information on whether Note 4 Gear VR will be compatible with Note 5? Any ideas?
Thanks,
Osho
Of course not. Different sizes, they told they are about to release a. New compatible version for them
Honestly they are the same size...I don't see why it wouldn't work. My friend just got his note 5 today so I will give it a try in my Note 4 Gear VR
Never Mind http://www.ubergizmo.com/2015/08/samsung-galaxy-note-5-doesnt-fit-gear-vr/
marcochapita said:
Of course not. Different sizes, they told they are about to release a. New compatible version for them
Click to expand...
Click to collapse
They never said that exactly. They told us to wait for Oculus Connect before buying a new phone, so that could mean no Gear VR for the Note 5 if they decide on announcing a VR phone.
What about Note Edge?
Will any VR work with note edge either Glaxay Vr or Innovator edition?
Any trick....!
Sent from my SM-N910C using xda premium
ipsuvedi said:
What about Note Edge?
Will any VR work with note edge either Glaxay Vr or Innovator edition?
Any trick....!
Sent from my SM-N910C using xda premium
Click to expand...
Click to collapse
No support for the Note Edge.
Got my note 5 and have been trying to connect it to the gear VR (Note 4 version). I got the oculus apps installed (ported from my Note 4 using Samsung smart switch), but the micro usb connector on the gear vr has a bump on it which stops anything other than the Note 4 from connecting. I looked inside the Note 4 micro usb port and I can see a notch to accommodate the bump. So Samsung succeeded in making a standardized connector into a proprietary one. *Hurray!*
Anyway, I then bought a micro usb extender cable and cut the notch into it myself. Still a no go. The extender doesn't fit on all the way (only about 4/5 the way). It seems like the female end on the Note 4 not only has a notch, but is also deeper *Hurray again!*
I tried connecting the Note 4 with the extender anyway, but couldn't get it to enter the oculus app. My last thought is to file down the bump on the gear vr connector. My only concern is that the bump is required to engage something on the Note 4. Definitely don't want to make a $200 mistake.
Has anyone tried shaving this bump down? Or has anyone heard of someone trying this?
Update: I filed down the bump and got the Note 5 to fit. Unfortunately, nothing happened. I'll try again after the official firmware update. However, I also tried the Galaxy S6 and S6 edge with no luck and those do have the firmware needed so it looks like there is a software lock preventing anything other than the Note 4 from working. The good news is that the Note 4 still fits and works :thumb: I'll be posting about this on the Techisode TV channel if anyone wants to see images and video of the process.
Update 2: video uploaded.
How about changing build prop. Wonder if it checks build prop for verification. Also wonder if there was any vr apps already pre-installed before you sidesynced anything. If so try using vr setup wizard. Then again the S6 didn't work so probably no go. Could be a kernel thing. That's what delayed the lollipop update back then for devices with gear vr software.
Sent from my SAMSUNG-SM-N910A using Tapatalk
What a pity Galaxy Note 5 not work with Gear VR.
This isnt too bad of a Necro, but curious if anyone had any other trys with this
I don't think anyone else is going to bother now that the latest Gear VR iteration got confirmed yesterday at Oculus Connect, with Note 5 and S6e+ support along with the smaller S6 variants. At least the Note 5 can do Gear VR after all.
If anything, what might make me curious is the inverse: taking that recent Gear VR iteration, when it hits store shelves, and checking to see if the Note 4 acknowledges it at all. I'm guessing not, since it's not officially supported and the USB descriptor probably won't match up enough for the Gear VR Service to do its thing.
I hope the Note 4 works with the new gear VR. I don't like the direction Samsung is going with there product support and I don't like the Note 5. The gear VR for the Note 4 clearly has issues that have been resolved with subsequent versions. It's extremely disappointing Samsung most likely will ignore and forget the Note 4, especially even more disappointing since it's the device that started this VR evolution.
I have last year's version of the Gear VR and pre-ordered a Galaxy S8. In the UK the new VR is not being offered this time round (we get a Samsung wireless speaker) so I am hoping the 2016 VR will work with the S8. I have searched the web but all I find is reference to the new version being released this year.
Hoping someone might be able to confirm this.
.
apprentice said:
I have last year's version of the Gear VR and pre-ordered a Galaxy S8. In the UK the new VR is not being offered this time round (we get a Samsung wireless speaker) so I am hoping the 2016 VR will work with the S8. I have searched the web but all I find is reference to the new version being released this year.
Hoping someone might be able to confirm this.
.
Click to expand...
Click to collapse
I don't think it will work. The S8 has Type C USB port.
red6hu said:
I don't think it will work. The S8 has Type C USB port.
Click to expand...
Click to collapse
Ah but the VR comes with an interchangeable plug. I used it with My Note 7. I guess it's the size of the S8 and/or the software that's probably not going to work. I don't know.
.
apprentice said:
Ah but the VR comes with an interchangeable plug. I used it with My Note 7. I guess it's the size of the S8 and/or the software that's probably not going to work. I don't know.
.
Click to expand...
Click to collapse
Good to know that.
The size of the S8 is smaller than the size of the Note7, so it won't be a problem.
According the below link Gear VR 2016 is compatible with the S8.
https://www.androidheadlines.com/2017/03/deal-save-50-samsung-gear-vr-2016-31417.html
red6hu said:
Good to know that.
The size of the S8 is smaller than the size of the Note7, so it won't be a problem.
According the below link Gear VR 2016 is compatible with the S8.
https://www.androidheadlines.com/2017/03/deal-save-50-samsung-gear-vr-2016-31417.html
Click to expand...
Click to collapse
You are a star! Thanks for the info
.
I've just called Samsung and they said that both S8 and S8+ will fit into the 2016 Gear VR.
I chatted with 2 different Samsung employers and one of them said it will work and the other one said it won't. Hopefully i will receive the S8 tomorrow and then i can try it myself... Any of you that have tried it?
I have the s8+ and it is too tall to fit into the gear vr even with the adjustments. Also I used micro usb to USB type C connector and it doesn't even boot up oculus. Don't think it's backwards compatible but I don't have a regular s8, so maybe it will work for that. I personally can't even get the software for gear vr to load from the headsets USB.
This does work as I have S8+ and 2016 Gear VR
SephAbdullah said:
I have the s8+ and it is too tall to fit into the gear vr even with the adjustments. Also I used micro usb to USB type C connector and it doesn't even boot up oculus. Don't think it's backwards compatible but I don't have a regular s8, so maybe it will work for that. I personally can't even get the software for gear vr to load from the headsets USB.
Click to expand...
Click to collapse
Are you using the right adaptor that came with the VR? It's a small cube that replaces the entire existing plug, by sliding a small catch. Don't use a standard micro usb to usb C adaptor, that won't work and is probably the reason your phone doesn't fit in the frame.
I can confirm that my S8 does work in the 2016 VR and have been playing a couple of games successfully ... however I have experienced a complete system lock up twice now causing the phone to reboot. One occasion was just browsing my library so it wasn't down to processor load.
I believe it's more likely to be a software issue rather than the headset, so hopefully that can be fixed as I cannot justify purchasing a new VR every 12 months.
Sent from my SM-G950F using Tapatalk
S8+ and Gear VR sm-r323
Hi, I did a bit of research into the gear vr and decided to buy the gear vr 2016 aka sm-r323 2nd generation after reading it works with s8+ so I ordered the VR from amazon @ 45quid. When I received it the models compatible were s7, s7 edge, note 5, s6, s6 edge etc... on the box.
My phone arrived on Thursday and first thing after setting up my phone was seeing if it worked with the vr 2 aka sm-r323
And all was good it downloaded all software and ran updates and the gear vr store etc.. all looked up to date.
Downloaded a few games and roller coaster demos and the Star Wars clips all ran fine no crashes.
I'm just waiting on my motion controller to arrive now 2-3 weeks from mobile fun @ 50quid.
How ever the only thing I would say is it is a tight fit. When the phone is in with the USB c clip and in the "a" position if looking at the back of the phone it is about 1-2mm higher on the right side the end which self adjusts to size of phone.
This didn't have an effect on quality or let light in etc... I didn't notice or have any issues with it.
NickOonline said:
Hi, I did a bit of research into the gear vr and decided to buy the gear vr 2016 aka sm-r323 2nd generation after reading it works with s8+ so I ordered the VR from amazon @ 45quid. When I received it the models compatible were s7, s7 edge, note 5, s6, s6 edge etc... on the box.
My phone arrived on Thursday and first thing after setting up my phone was seeing if it worked with the vr 2 aka sm-r323
And all was good it downloaded all software and ran updates and the gear vr store etc.. all looked up to date.
Downloaded a few games and roller coaster demos and the Star Wars clips all ran fine no crashes.
I'm just waiting on my motion controller to arrive now 2-3 weeks from mobile fun @ 50quid.
How ever the only thing I would say is it is a tight fit. When the phone is in with the USB c clip and in the "a" position if looking at the back of the phone it is about 1-2mm higher on the right side the end which self adjusts to size of phone.
This didn't have an effect on quality or let light in etc... I didn't notice or have any issues with it.
Click to expand...
Click to collapse
That's really helpful. Thanks! I was in two minds about selling my 2016 VR but based on what you said I'll keep it for the S8+
.
Sent from my MHA-L09 using Tapatalk
apprentice said:
Are you using the right adaptor that came with the VR? It's a small cube that replaces the entire existing plug, by sliding a small catch. Don't use a standard micro usb to usb C adaptor, that won't work and is probably the reason your phone doesn't fit in the frame.
I can confirm that my S8 does work in the 2016 VR and have been playing a couple of games successfully ... however I have experienced a complete system lock up twice now causing the phone to reboot. One occasion was just browsing my library so it wasn't down to processor load.
I believe it's more likely to be a software issue rather than the headset, so hopefully that can be fixed as I cannot justify purchasing a new VR every 12 months.
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
It seems there is a widely reported issue with the S8 freezing and rebooting generally that has nothing to do with the VR. So I am confident the 2016 VR will work fine eventually.
.
Sent from my MHA-L09 using Tapatalk
Amazon offer this year's Gear VR & controller in UK although it is rather expensive compared to the 2016 version & it frequently goes out of stock Samsung Gear VR Controller with Headphones Black https://www.amazon.co.uk/dp/B06XYDDQ5F/ref=cm_sw_r_cp_apa_TmibzbG02CAD6
Sent from my SM-G930F using Tapatalk
To all potential buyers of the older generation Gear VR: Don't get misled into those reviews saying that the previous gen USB-C Gear VR (from Note 7's generation) works with the S8+. It technically does work but there are some compromises.
I currently have both, and you can very clearly tell the difference between them. I mean very clearly.
The older Gear VR's alignment is slightly off to the left if used with S8+ (the center line is not exactly in the center). But it's OK with the S8 non-plus and Note 7 if you're wondering.
The newer model has clearly less chromatic aberration and much better sharpness off-center sharpness (I'm not talking about the extreme edges, but the sides of the view screen that you very frequently look at). It's either a lens issue with the older one or because of the above problem.
It can theoretically be fixed in software but I'm not sure if they will ever do it.
Syraxius said:
The older Gear VR's alignment is slightly off to the left if used with S8+ (the center line is not exactly in the center). But it's OK with the S8 non-plus.
Click to expand...
Click to collapse
The alignment issue affects the standard S8 as well. Some people don't notice because they can't or don't maximize the FOV, but if you do you will definitely see part of the image intended for one eye with the other.
For the record the compatibility issue isn't with the main Gear VR unit itself but with the Type-C connector specifically. You can make the 2016 model properly compatible with S8 devices simply by acquiring and using a Type-C connector from a 2017 model (they are cross-compatible).
Colonel_Izzi said:
The alignment issue affects the standard S8 as well. Some people don't notice because they can't or don't maximize the FOV, but if you do you will definitely see part of the image intended for one eye with the other.
For the record the compatibility issue isn't with the main Gear VR unit itself but with the Type-C connector specifically. You can make the 2016 model properly compatible with S8 devices simply by acquiring and using a Type-C connector from a 2017 model (they are cross-compatible).
Click to expand...
Click to collapse
I don't see how the USB Type-C connector from the latest version of the GearVR is all that different from the connector from last years model. I think the problem maybe due to the screen aspect ratio of the SGS8 series as it has a 18.5:9 rather than a 16:9, which is what is most commonly found on past android flagships.
DarkGuyver said:
I don't see how the USB Type-C connector from the latest version of the GearVR is all that different from the connector from last years model.
Click to expand...
Click to collapse
See: https://www.reddit.com/r/GearVR/wik...5.2C_2016_and_2017_consumer_gear_vr_models.3F
cainn24 said:
See: https://www.reddit.com/r/GearVR/wik...5.2C_2016_and_2017_consumer_gear_vr_models.3F
Click to expand...
Click to collapse
I honestly wouldn't have notice the size difference if somebody hadn't point it out to me.
Colonel_Izzi said:
The alignment issue affects the standard S8 as well. Some people don't notice because they can't or don't maximize the FOV, but if you do you will definitely see part of the image intended for one eye with the other.
For the record the compatibility issue isn't with the main Gear VR unit itself but with the Type-C connector specifically. You can make the 2016 model properly compatible with S8 devices simply by acquiring and using a Type-C connector from a 2017 model (they are cross-compatible).
Click to expand...
Click to collapse
Damn, so better get a good BoboVR Z4 and activate Gear VR developer mode to get most of both worlds
The 2017 connector is not easy to find