Related
[Solved]Pls help:Rescue Photos
My phone stuck on logo screen after OTA update
I want to export my precious photos in my phone.
Unfortunately, the photos were saved in internal storage, not in SDcard.
I have searched about flashtool, but i have no idea flashing official rom will whether erases my data(personal photos,documents).
My phone is not root or even unlocks bootloader.
I can access fastboot screen
Can I export the data through fastboot?
Can someone help me to show fastboot command step by step?
............................Solved..........................................
I tried to use flashtool and my data was rescued successfully
Thank you all.:good:
Uncheck data on flashtool and your ok. Check guides before using flashtool
Good luck.
Sent from my awesome 1080p Z n sh!t
asd888 said:
Pls help:Rescue Photos
My phone stuck on logo screen after OTA update
I want to epxport my precious photos in my phone.
Unfortunately, the photos were saved in internal storage, not in SDcard.
I have searched about flashtool, but i have no idea flashing official rom will whether erases my data(personal photos,documents).
My phone is not root or even unlock bootloader.
I can access fastboot screen
Can I export the data through fastboot?
Can someone helps me to show fastboot command step by step?
Click to expand...
Click to collapse
Go to recovery and export ur file
>> Flashing Stock rom WON'T erase ur data
just un-select wipe if u wanna use flash tool
But u can use Sony Update Service (SUS) too
:good:
asd888 said:
Pls help:Rescue Photos
My phone stuck on logo screen after OTA update
I want to epxport my precious photos in my phone.
Unfortunately, the photos were saved in internal storage, not in SDcard.
I have searched about flashtool, but i have no idea flashing official rom will whether erases my data(personal photos,documents).
My phone is not root or even unlock bootloader.
I can access fastboot screen
Can I export the data through fastboot?
Can someone helps me to show fastboot command step by step?
Click to expand...
Click to collapse
Whatever u do,don't repair ur phone through seus..it'll delete all ur sd card..download an ftf for ur phone and flash it via flashtool and uncheck data in the wipe menu..just check it out..ur prob is solvable,don't worry
Hit thanks if I helped you.Sent from my Killer Xperia Z(C6602) using xda premium.
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
picked up a Z1 and went straight to rooting it.
rooted succesfully, installed the dualrecovery, and then attempted ot install VANIR only to realize that i did not unlock the bootloader.
so it will not turn on. holding power it vibrates every 2 seconds. plugged in it does teh same, but also blinks red.
i can get the computer to recognize it several different ways.
blue led- fastboot interface in device manager - not detected in adb devices
red/green/blank led - SOMC flash - no adb
PC companion is no go.
I have no idea where to go from here. I am currently downloading flashtool to see where that gets me, but I was hoping someone might have some direct and well known solution that i did not uncover in my searching..
Thanks
jewnersey said:
picked up a Z1 and went straight to rooting it.
rooted succesfully, installed the dualrecovery, and then attempted ot install VANIR only to realize that i did not unlock the bootloader.
so it will not turn on. holding power it vibrates every 2 seconds. plugged in it does teh same, but also blinks red.
i can get the computer to recognize it several different ways.
blue led- fastboot interface in device manager - not detected in adb devices
red/green/blank led - SOMC flash - no adb
PC companion is no go.
I have no idea where to go from here. I am currently downloading flashtool to see where that gets me, but I was hoping someone might have some direct and well known solution that i did not uncover in my searching..
Thanks
Click to expand...
Click to collapse
you have to flash a new firmware from flashtool.this will solve your problem.you cant enter to recovery?
Sent from my C6903 using XDA Premium 4 mobile app
Anonymuszymus said:
you have to flash a new firmware from flashtool.this will solve your problem.you cant enter to recovery?
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He will not be able to enter recovery because dual recovery is system based which he cannot get to as its now trying to boot a custom kernel with a locked bootloader.
Also the recovery on a custom kernel is in the kernel, which also cannot boot. Hence a bootloop with no chance of recovery mode
The solution should be easy enough
Flash a stock FTF for your device using flashtool
gregbradley said:
He will not be able to enter recovery because dual recovery is system based which he cannot get to as its now trying to boot a custom kernel with a locked bootloader.
Also the recovery on a custom kernel is in the kernel, which also cannot boot. Hence a bootloop with no chance of recovery mode
The solution should be easy enough
Flash a stock FTF for your device using flashtool
Click to expand...
Click to collapse
downloading flashtool now.
Will flashtool recognize the phone even though adb does not?
this for ftf?
http://xperiafirmware.com/8-firmware/42-sony-xperia-z1-c6903
this for bootloader?
http://forum.xda-developers.com/showthread.php?t=2440597
jewnersey said:
downloading flashtool now.
Will flashtool recognize the phone even though adb does not?
this for ftf?
http://xperiafirmware.com/8-firmware/42-sony-xperia-z1-c6903
this for bootloader?
http://forum.xda-developers.com/showthread.php?t=2440597
Click to expand...
Click to collapse
Look in the general section for a sticky thread called FTF mega collection for the best FTF file for you.
Once you have flashed that then you should* root, then unlock the boot following the official sony instructions (http://bit.ly/1cebNlh).
once you have done that flash the boot.img of the rom you want to flash using fastboot them flash the update.zip in recovery
*The reason to root before unlocking the boot is to backup the DRM keys in your TA partition. If you do not do that you lose them forever.
Help me Agnew to sony
I have recently update my z1 c6902 to lollipop
I wanted root my z1 and want to install custom recovery plz help.me
Plz guide me I am new to.Sony from note 3
rajdeep312 said:
Help me Agnew to sony
I have recently update my z1 c6902 to lollipop
I wanted root my z1 and want to install custom recovery plz help.me
Plz guide me I am new to.Sony from note 3
Click to expand...
Click to collapse
Unlock your bootloader buddy or downgrade to Kitkat and root and then flash pre rooted rom for c6902
Sent from my C6902
gauravbhakuni90 said:
Unlock your bootloader buddy or downgrade to Kitkat and root and then flash pre rooted rom for c6902
Sent from my C6902
Click to expand...
Click to collapse
I have unlocked bootloader and how to downgrade my phone plz step by step guide
Wrong thread... This isn't Q&A
rajdeep312 said:
I have unlocked bootloader and how to downgrade my phone plz step by step guide
Click to expand...
Click to collapse
anyone alive here i have wrongly flash c6906 firmware on c6902
i have no network,unknown baseband,no wifi working,imei null plz help to solve my problem
rajdeep312 said:
anyone alive here i have wrongly flash c6906 firmware on c6902
i have no network,unknown baseband,no wifi working,imei null plz help to solve my problem
Click to expand...
Click to collapse
If you have locked bootloader, try to repair via pc companion, if unlocked, try to flash the right firmware
Sent from my LT25i using XDA Free mobile app
rajdeep312 said:
Help me Agnew to sony
I have recently update my z1 c6902 to lollipop
I wanted root my z1 and want to install custom recovery plz help.me
Plz guide me I am new to.Sony from note 3
Click to expand...
Click to collapse
rajdeep312 said:
anyone alive here i have wrongly flash c6906 firmware on c6902
i have no network,unknown baseband,no wifi working,imei null plz help to solve my problem
Click to expand...
Click to collapse
Flash any C6902 ftf, the problem with your network, wifi, baseband will be solved. By the way, do you still have your Z1 box? SI and IMEI number are on the label of the box. By knowing the SI number, you can find the exact customized version for your phone. Check this thread (Just in case).
If u unlocked your device bootloader means,,,just flash custom kernel using flashtool which is already prerooted... And njoy the root
Riyas22 said:
If u unlocked your device bootloader means,,,just flash custom kernel using flashtool which is already prerooted... And njoy the root
Click to expand...
Click to collapse
i want to install cynogenmod 12
plz guide me step by step i am new in sony mobiles
i am on stock lollipop unrooted plz help me
Riyas22 said:
If u unlocked your device bootloader means,,,just flash custom kernel using flashtool which is already prerooted... And njoy the root
Click to expand...
Click to collapse
Or if you dont want to unlock the bootloader then downgrade to. 108 firmware root install recovery then just flash pre-rooted lollipop and done.... Pre rooted lollipop's are available in general and Android development section's..
---------- Post added at 08:39 AM ---------- Previous post was at 08:16 AM ----------
rajdeep312 said:
i want to install cynogenmod 12
plz guide me step by step i am new in sony mobiles
i am on stock lollipop unrooted plz help me
Click to expand...
Click to collapse
Install flashtool and install drivers, they are available in flashtool's installed directory
Test USB cable and drivers by connecting your phone to pc
firstly connect direct i.e. on phone
Second power phone off then hold volume down button and insert usb cable
Third similar to second but press volume up insted of down
If flashtool detects your phone in normal mode flash mode and fastboot mode then you are good to go...
Download and flash 108 firmware
Open flash tool click on lightning button browse your downloaded ftf
Click flash and wait a dialogue box will open with picture of phone in it
Once dialogue box appears power off your phone wait then press volume and hold volume down and insert usb cable
Immediately release volume button
When dialogue box disappears
Wait and disconnect and turn on phone when flashtool says so..
Once all set root your phone via easyroot method just google it..
Install nuts dual recovery also google it guides are available for both installation via windows
Now take ta backup via ta backup tool also google it it is very important do so
Now once all done open flash tool
Connect phone in fastboot mode i.e. power off phone, wait, volume up hold and connect usb, then release when identified
click on 'blu' button and insert unlock code provided by sony
If you dont have unlock code again google sony bootloader unlock and follow through sony's site
Now insert unlock code click on unlock
Congratulations you have unlocked the bootloader
Now download cm 12 rom and flash via twrp..
kathanpatel1001 said:
Or if you dont want to unlock the bootloader then downgrade to. 108 firmware root install recovery then just flash pre-rooted lollipop and done.... Pre rooted lollipop's are available in general and Android development section's..
---------- Post added at 08:39 AM ---------- Previous post was at 08:16 AM ----------
Install flashtool and install drivers, they are available in flashtool's installed directory
Test USB cable and drivers by connecting your phone to pc
firstly connect direct i.e. on phone
Second power phone off then hold volume down button and insert usb cable
Third similar to second but press volume up insted of down
If flashtool detects your phone in normal mode flash mode and fastboot mode then you are good to go...
Download and flash 108 firmware
Open flash tool click on lightning button browse your downloaded ftf
Click flash and wait a dialogue box will open with picture of phone in it
Once dialogue box appears power off your phone wait then press volume and hold volume down and insert usb cable
Immediately release volume button
When dialogue box disappears
Wait and disconnect and turn on phone when flashtool says so..
Once all set root your phone via easyroot method just google it..
Install nuts dual recovery also google it guides are available for both installation via windows
Now take ta backup via ta backup tool also google it it is very important do so
Now once all done open flash tool
Connect phone in fastboot mode i.e. power off phone, wait, volume up hold and connect usb, then release when identified
click on 'blu' button and insert unlock code provided by sony
If you dont have unlock code again google sony bootloader unlock and follow through sony's site
Now insert unlock code click on unlock
Congratulations you have unlocked the bootloader
Now download cm 12 rom and flash via twrp..
Click to expand...
Click to collapse
Everything ok
When install cm with term or Cwm unable to mount system and unable to flash rom partition not found next when reboot it gives only vibration when press power button and after nothing shows
I have unlocked bootloader version and please give link of kernel for rooting lollipop
rajdeep312 said:
Everything ok
When install cm with term or Cwm unable to mount system and unable to flash rom partition not found next when reboot it gives only vibration when press power button and after nothing shows
I have unlocked bootloader version and please give link of kernel for rooting lollipop
Click to expand...
Click to collapse
Try to flash boot.img via fastboot after flashing...
Boot.img is inside the zip of cm rom.
kathanpatel1001 said:
Try to flash boot.img via fastboot after flashing...
Boot.img is inside the zip of cm rom.
Click to expand...
Click to collapse
i have try your way phone boots at sony logo and then auto rebooting not going at cynogen logo
at sony logo shows and then reboot agin show sony logo again reboot
Help,
i bricked my phone because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card",
i checked using *#*#7372489#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No"
even though i already unlock it before i brick my phone..
if somebody know how to fix this please help
thank you
S O N Y said:
Help,
i bricked my phone because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card",
i checked using *#*#7372489#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No"
even though i already unlock it before i brick my phone..
if somebody know how to fix this please help
thank you
Click to expand...
Click to collapse
I dont think you have successfully unlock your bootloader. Your attempt was failed. If it says "Bootloader unlock allowed : No" then how can u unlock it? If u think u unlocked it then try relocking your bootloader using flashtools and flash ftf.
Thanks for reply
But i was sure to unlock my bootloader before flashing that custom kernel (Williams v5.1)
After flashing that kernel my phone bricked
I flashed stock kernel
My phone powered on but bootloader unlocking allow changed to no and my phone show "invalid card"
S O N Y said:
Thanks for reply
But i was sure to unlock my bootloader before flashing that custom kernel (Williams v5.1)
After flashing that kernel my phone bricked
I flashed stock kernel
My phone powered on but bootloader unlocking allow changed to no and my phone show "invalid card"
Click to expand...
Click to collapse
Is your phone carrier locked or not?
Just tell me which method you unlocked your bootloader(flashtools or adb).
This could be RIL isuue(or maybe I'm thinking too much).
Check out this app
https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Phoenix854 said:
Is your phone carrier locked or not?
Just tell me which method you unlocked your bootloader(flashtools or adb).
This could be RIL isuue(or maybe I'm thinking too much).
Check out this app
https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Click to expand...
Click to collapse
No my phone carrier is unlock.
I unlocked my bootloader with flashtool.
The real question is, is your Xperia SP allowed to unlock bootloaders, in the first place?
TechnoSparks said:
The real question is, is your Xperia SP allowed to unlock bootloaders, in the first place?
Click to expand...
Click to collapse
Yes
Phoenix854 said:
Check out this app
https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Click to expand...
Click to collapse
I installed that app but it won't support xperia sp.
S O N Y said:
Yes
Click to expand...
Click to collapse
Chances are, you have RIL problems. Would you like to try my work here: http://forum.xda-developers.com/xperia-sp/general/stock-components-flashable-zips-t3184111
Sounded like an advertisement ._. But no, I think you really should try it
TechnoSparks said:
Chances are, you have RIL problems. Would you like to try my work here: http://forum.xda-developers.com/xperia-sp/general/stock-components-flashable-zips-t3184111
Sounded like an advertisement ._. But no, I think you really should try it
Click to expand...
Click to collapse
I flashed your flashable zips to my XSP C5303 but nothing changes.l
And my current rom is MIUI7 LBL By Zenamp
S O N Y said:
I flashed your flashable zips to my XSP C5303 but nothing changes.l
And my current rom is MIUI7 LBL By Zenamp
Click to expand...
Click to collapse
Get back to stock and relock your bootloader.See if it works.
P.S. Get back to stock by flashing ftf through flashtools not by zip and wipe everything except ext card
Phoenix854 said:
Get back to stock and relock your bootloader.See if it works.
P.S. Get back to stock by flashing ftf through flashtools not by zip and wipe everything except ext card
Click to expand...
Click to collapse
Ok I will try.
Phoenix854 said:
relock your bootloader.
Click to expand...
Click to collapse
After flash that kernel my bootloader always locked.
And other issue that I have no access to fastboot mode.
When phone is off and connected to pc and I press volume up and power button the blue led doesn't
On.
Sorry for my very bad english.
S O N Y said:
And other issue that I have no access to fastboot mode.
When phone is off and connected to pc and I press volume up and power button the blue led doesn't
On.
Sorry for my very bad english.
Click to expand...
Click to collapse
To access any bootloader specific mode you will need to power down the device first before connecting it to a computer.
Therefore, please try again
Power down Xperia SP
Hold volume button UP for fastboot
Connect usb to Xperia SP
TechnoSparks said:
To access any bootloader specific mode you will need to power down the device first before connecting it to a computer.
Therefore, please try again
Power down Xperia SP
Hold volume button UP for fastboot
Connect usb to Xperia SP
Click to expand...
Click to collapse
Yes I was unlocked my bootloader with your steps.
But after flash that kernel I don't have any access to FASTBOOT.
S O N Y said:
And other issue that I have no access to fastboot mode.
When phone is off and connected to pc and I press volume up and power button the blue led doesn't
On.
Sorry for my very bad english.
Click to expand...
Click to collapse
Just flash stock using flashmode(volume down) and boot stock ROM. Just check if SIM is working.
It can be that your SIM may have damaged so you check your SIM in some other phone.
I also see that you have no access to fastboot mode.I think the fastmode drivers are missing on your computer.
I can give you detailed steps if you want to know.
Phoenix854 said:
Just flash stock using flashmode(volume down) and boot stock ROM. Just check if SIM is working.
It can be that your SIM may have damaged so you check your SIM in some other phone.
I also see that you have no access to fastboot mode.I think the fastmode drivers are missing on your computer.
I can give you detailed steps if you want to know.
Click to expand...
Click to collapse
No my SIM doesn't have any problems. (I use other sims)
And fastboot drivers installed on my computer.
Problem is
After flashed that kernel I have lost bootloader unlocking allow and my phone cannot read any SIM.
S O N Y said:
No my SIM doesn't have any problems. (I use other sims)
And fastboot drivers installed on my computer.
Problem is
After flashed that kernel I have lost bootloader unlocking allow and my phone cannot read any SIM.
Click to expand...
Click to collapse
Which kernel are you trying to flash on which ROM exactly?
Phoenix854 said:
Which kernel are you trying to flash on which ROM exactly?
Click to expand...
Click to collapse
Williams kernel v5.1 on stock Sony rom build (.207)
T-Mobile USA