Hi,
I am always afraid of not being able to restore my phone with some sort of backup. Due to the fact that the amazing flashtool is a bit to high tech for me I was able to find a way to easy restore my device. Here is how I did this:
1: Downloade Sony Update Service from here: (Click)
2: Install it
3: Open it (it is wise to close Sony PC companion)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4: Accept the terms and contitions and click next
5: Select your device:
6: Click Next
7: Follow intstuctions on screen. If you are running the latest stock it will tell you. You can abort it and you can continue it. You also see some warnings about loosing data!!
8: After flash it will tell you to unplug device and turn it on.
9: DONE
+charging your phone 50%
Tapatalk 2-vel küldve az én C5303-ről
No I've contacted Sony and they said that if you are on Windows 8/8.1 you need to run the program in compatible mode Windows 7..
How about TA partition for unlocked bootloader??
First lock bootloader and then restore it? Or first restore and than lock??
It works in WinXP compatiibility mode, thanks.
I unlocked my bootloader and installed ROM 4.3 of doomlord, so i can do use this metod for restore for stock ROM ?
Enviado de meu C5303 usando Tapatalk HD
Ronny suzin said:
I unlocked my bootloader and installed ROM 4.3 of doomlord, so i can do use this metod for restore for stock ROM ?
Enviado de meu C5303 usando Tapatalk HD
Click to expand...
Click to collapse
No you first need to relock your bootloader and restore TA. After that you can use this. But you need to be on a 2.254 based rom before relocking so flashing any ftf with Flashtool will work aswel.
But i dont create TA restore :/ and now, What i do?
Sorry bad english, i'm brazilian
Enviado de meu C5303 usando Tapatalk HD
Ronny suzin said:
But i dont create TA restore :/ and now, What i do?
Sorry bad english, i'm brazilian
Enviado de meu C5303 usando Tapatalk HD
Click to expand...
Click to collapse
That is very very dumb. The tutorial of Doomlord indicates that it is very very important to create a TA backup before unlocking bootloader. You can relock bootloader but features that needed the TA files (DRM keys) will no longer work.
I am using a custom rom but have not unlocked my bootloader. Can I use this and get back to stock?
Sorry if this is a silly question
Tsaska said:
Can I use this and get back to stock?
Click to expand...
Click to collapse
Yes, you can!
Devices in use:
Xperia ZL eXistenZ Ultra 4.0
Xperia SP eXistenZ Ultra 2.0
Xperia Tablet Z => Stock deodext 4.3 (waiting for eXistenZ)
smogf said:
How about TA partition for unlocked bootloader??
First lock bootloader and then restore it? Or first restore and than lock??
Click to expand...
Click to collapse
Pls someone answer this. I'm also waiting for answer for that....:good:
kelumsd said:
Pls someone answer this. I'm also waiting for answer for that....:good:
Click to expand...
Click to collapse
Restoring TA Partition will lock your BL.
mrjraider said:
That is very very dumb. The tutorial of Doomlord indicates that it is very very important to create a TA backup before unlocking bootloader. You can relock bootloader but features that needed the TA files (DRM keys) will no longer work.
Click to expand...
Click to collapse
after flashing ftf of 4.1.2 from flashtool same error is coming
kindly check same error is coming boot loop
21/032/2014 15:32:29 - INFO - Device disconnected
21/032/2014 15:32:40 - INFO - Device connected in flash mode
21/032/2014 15:32:40 - INFO - Opening device for R/W
21/032/2014 15:32:41 - INFO - Reading device information
21/032/2014 15:32:41 - INFO - Phone ready for flashmode operations.
21/032/2014 15:32:41 - INFO - Current device : C5302 - YT910LE998 - 1272-1094_R2B - 1269-3538_12.1.A.0.266 - INDIA-HSPA_12.1.A.0.266
21/032/2014 15:32:41 - INFO - Start Flashing
21/032/2014 15:32:41 - INFO - Processing loader
21/032/2014 15:32:41 - INFO - Checking header
21/032/2014 15:32:41 - INFO - Flashing data
21/032/2014 15:32:46 - INFO - Loader : S1_Root_7054 - Version : R5G006 / Bootloader status : ROOTABLE
21/032/2014 15:32:48 - INFO - Processing partition-image.sin
21/032/2014 15:32:49 - INFO - Checking header
21/032/2014 15:32:49 - INFO - Flashing data
21/032/2014 15:32:52 - WARN - This file is ignored : simlock.ta
21/032/2014 15:32:52 - INFO - Processing kernel.sin
21/032/2014 15:32:52 - INFO - Checking header
21/032/2014 15:32:52 - INFO - Flashing data
You are a life saver! Thank you so much. I was messing around in CWM and hit format sdcard, data, system etc LOL
Then i powered off the phone thinking i could start it later and get back into CWM to flash a different ROM but my phone just powered on to the SONY logo and nothing else.
This worked great. Very quick and easy :good:
Hi all,
I've ask a mod to close this thread of mine the reason for this is simple. Sony has stopped it's support for the Sony Update Service or SUS.. It has been merged into Sony PC companion or PCC. When I have the time I will create a new thread with explanation about the Sony PC Companion and the use of the "SUS" function!
Sorry guys I can't help it...
Regards
Related
Hi,
Just got the notification for the new system software update - check out !!
I am using docomo version SO-03E.
NTT DoCoMo has launched a software update service Android tablet of Sony mobile made of "Xperia Tablet Z SO-03E".
The contents of this update, operability improvement of the touch panel is intended.
Change the display and some specification is applied addition to this.
Because it is not supported on automatic update, it is necessary to manually update the user. Approximately three minutes, the time to update is about 7 minutes when it was performed by connecting the computer when it is performed in the terminal body. Build number after the update will be "10.1.E.0.265".
Source - http://k-tai.impress.co.jp/docs/news/20130515_599580.html
Here is the downlaod link for FTF file
http://www.4shared.com/file/cS4sLxsd/XperiaTabletZ_SO-03E_101E0265_.html
Here is the download link for the blob files:
http://www.4shared.com/file/dAwWgNZ7/FILE_279796797.html
http://www.4shared.com/file/Yb0nTiRv/FILE_279796739.html
How to create FTF file from blob data, check this thread - Click Here
sent from seXperia Z - Black
RESERVED
sent from seXperia Z - Black
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from Xperia Tablet Z!!
Here is the download link for the blob files:
http://www.4shared.com/file/dAwWgNZ7/FILE_279796797.html
http://www.4shared.com/file/Yb0nTiRv/FILE_279796739.html
How to create FTF file from blob data, check this thread - Click Here
just downloaded a 4.5mb file and tried to update but failed...read that the update file is 840mb big... is it because i am on 3g?
i got the prompt. updated and installed fine...
forgot to mention my SO-03E is rooted using the "root many android" by Bin4ry
http://forum.xda-developers.com/showthread.php?t=1886460
jaseli said:
forgot to mention my SO-03E is rooted using the "root many android" by Bin4ry
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
I have a WiFi model also rooted with Bin4ry's tool, update 353 came and failed to install.
What's interesting, it successed after I flashed stock FTF and rooted again... Also root preserves after update.
can you share how to flash ftf files? do i need to flash booloader before i an flash ftf ?
jaseli said:
can you share how to flash ftf files? do i need to flash booloader before i an flash ftf ?
Click to expand...
Click to collapse
You can create the ftf with those two files shared in 1st post - method also described !!
sent from seXperia Z - Black
jaseli said:
forgot to mention my SO-03E is rooted using the "root many android" by Bin4ry
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
Your firmware is 10.1.E.0.244? seems 250 above can not be rooted
i am on 10.1.E.0.250
just purchased on 3 May and rooted using the root many android tool.
now i am wondering, if i will lose root after upgrading my firmware by flashing the FTF file...
@xperiax10.awesome
just tried to follow your links to create my FTF files.
however, the flashtool did not flash FTF file into my tablet.
i have followed the instruction in the NOOB post, created my files by including all EXCEPT loader.sin
all went well until i started to flash the files.
i can connect my tablet at flash mode, but it stucks at that, and disconnect automatically and reboot my tablet.
then flashtool saids i am connecting with USB debug off (but it is on), and might be in MTP mode (but it is in MSC mode).
any help is appreciated. thanks
jaseli said:
@xperiax10.awesome
just tried to follow your links to create my FTF files.
however, the flashtool did not flash FTF file into my tablet.
i have followed the instruction in the NOOB post, created my files by including all EXCEPT loader.sin
all went well until i started to flash the files.
i can connect my tablet at flash mode, but it stucks at that, and disconnect automatically and reboot my tablet.
then flashtool saids i am connecting with USB debug off (but it is on), and might be in MTP mode (but it is in MSC mode).
any help is appreciated. thanks
Click to expand...
Click to collapse
Didn´t know exactly what you did
But create the FTF without loader.sin (because flashtool hasn´t the correct one yet)
after this you have to add the loader.sin from an other FTF Tablet Z File (for example from this Firmware)
So after all you have an FTF File with the correct loader.sin
After that turn the device off and connect it to the pc when the flashtool show the message to connect a device to the computer while holding VOL down.
UserX10 said:
Didn´t know exactly what you did
But create the FTF without loader.sin (because flashtool hasn´t the correct one yet)
after this you have to add the loader.sin from an other FTF Tablet Z File (for example from this Firmware)
So after all you have an FTF File with the correct loader.sin
After that turn the device off and connect it to the pc when the flashtool show the message to connect a device to the computer while holding VOL down.
Click to expand...
Click to collapse
thank you... but this loader.sin file replacing process is getting too complicated ....
would be great if it was included in the OP of this post or the NOOB guide.... with corresponding instructions.
after all, flashing a FTF without certain element is already quite risky.
flashing a FTF with a loader.sin from another firmware is even more risky as we have no way to tell if this would brick the tablet ...
jaseli said:
thank you... but this loader.sin file replacing process is getting too complicated ....
would be great if it was included in the OP of this post or the NOOB guide.... with corresponding instructions.
after all, flashing a FTF without certain element is already quite risky.
flashing a FTF with a loader.sin from another firmware is even more risky as we have no way to tell if this would brick the tablet ...
Click to expand...
Click to collapse
rename the ftf to zip.
extract the loader.sin
add the loader.sin in the new Firmware (renamed from ftf to zip)
then rename back to .ftf
There is no risk with the loader, if it fits it will flash if not it will not flash.
Here is the downlaod link for FTF file
http://www.4shared.com/file/cS4sLxsd/XperiaTabletZ_SO-03E_101E0265_.html
xperiax10.awesome said:
Here is the downlaod link for FTF file
http://www.4shared.com/file/cS4sLxsd/XperiaTabletZ_SO-03E_101E0265_.html
Click to expand...
Click to collapse
thanks for sharing your FTF file.
however, i still cannot flash it through ... same error, after device connected, nothing happening, flashtool disconnect my device automatically and make it reboot and reports that USB debugging is off (but it is turned on before i turn the device off)
finally got my tablet updated successfully using the sony mobile update service.
but lost my root afterwards. (´д｀|||)
will try the root many android tool again later tonight. (failed. no more root until this tool is updated again)
從我使用 Tapatalk 2 的 SO-03E 發送
jaseli said:
finally got my tablet updated successfully using the sony mobile update service.
but lost my root afterwards. (´д｀|||)
will try the root many android tool again later tonight. (failed. no more root until this tool is updated again)
從我使用 Tapatalk 2 的 SO-03E 發送
Click to expand...
Click to collapse
The only way to root new firmware at the moment may be flashing a CWM zip of the latest version, after flashing the rootable FTF with root and recovery installed.
And OTA from a rooted firmware also works.
Here is an error log when I want to flash official .434 ftf
06/026/2013 09:26:12 - INFO - <- This level is successfully initialized
06/026/2013 09:26:12 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
06/026/2013 09:26:16 - INFO - Device disconnected
06/026/2013 09:26:19 - INFO - Selected C6603 / 10.1.A.1.434 SE / Unbranded
06/026/2013 09:26:19 - INFO - Preparing files for flashing
06/027/2013 09:27:11 - INFO - Please connect your device into flashmode.
06/029/2013 09:29:16 - INFO - Device connected in flash mode
06/029/2013 09:29:16 - INFO - Opening device for R/W
06/029/2013 09:29:16 - INFO - Reading device information
06/029/2013 09:29:16 - INFO - Phone ready for flashmode operations.
06/029/2013 09:29:16 - INFO - Start Flashing
06/029/2013 09:29:16 - INFO - Processing loader
06/029/2013 09:29:16 - INFO - Checking header
06/029/2013 09:29:17 - INFO - Flashing data
06/029/2013 09:29:17 - INFO - Loader : S1_Root_5ca3 - Version : APQ8064_30 / Bootloader status : NOT_ROOTABLE
06/029/2013 09:29:17 - INFO - Ending flash session
06/029/2013 09:29:17 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0026";ERR_DYNAMIC="Write TA failed.";
06/029/2013 09:29:17 - ERROR - Error flashing. Aborted
06/029/2013 09:29:17 - INFO - Device connected in flash mode
06/029/2013 09:29:18 - INFO - Device disconnected
Click to expand...
Click to collapse
And here is the stderr.log
flashsystem.X10FlashException: ERR_SEVERITY="MINOR";ERR_CODE="0025";ERR_DYNAMIC="Wrong parameters";
at flashsystem.Command.send(Command.java:119)
at flashsystem.X10flash.getDevInfo(X10flash.java:368)
at flashsystem.X10flash.openDevice(X10flash.java:496)
at flashsystem.X10flash.openDevice(X10flash.java:412)
at gui.tools.FlashJob.run(FlashJob.java:36)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Click to expand...
Click to collapse
Some expert can help me? plz
As far as I remember u need flashtool beta 4 to flash .434 firmware im not sure about it though as I recently flashed a .350 firmware with beta 6,
I'd suggest you try another ftf as there were some which didn have loader.sin included in them, maybe thats why the error.
Sent from my C6602 using xda app-developers app
msc3169 said:
As far as I remember u need flashtool beta 4 to flash .434 firmware im not sure about it though as I recently flashed a .350 firmware with beta 6,
I'd suggest you try another ftf as there were some which didn have loader.sin included in them, maybe thats why the error.
Sent from my C6602 using xda app-developers app
Click to expand...
Click to collapse
Actually, It does not matter which version of FlashTool you use to flash any version of the firmware ... considering the original error, it's even unrelated...
Code:
06/029/2013 09:29:17 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0026";ERR_DYNAMIC=" Write TA failed.";
The TA partition is actually something which should not be touched by an FTF... it's phone specific and contains everything which makes your phone unique ... flashing the TA from someone else can actually render your phone bricked ...
@Androxyde may be able to shed a light on the error...
@jason57 you might want to download a different FTF and try again... Do you have the link to the FTF you downloaded and tried to flash?
Ok so I'm trying to downgrade my XSP since it's just painful to use it on 4.3,way too many bugs.
But I get this error when I try to flash a generic 4.1.2 ftf.
20/052/2014 07:52:10 - INFO - Selected SP-C5303 / 12.0.A.2.254 / Generic UK
20/052/2014 07:52:10 - INFO - Preparing files for flashing
20/053/2014 07:53:07 - INFO - Please connect your device into flashmode.
20/054/2014 07:54:01 - INFO - Device connected in fastboot mode
20/054/2014 07:54:06 - INFO - Device disconnected
20/054/2014 07:54:13 - INFO - Device connected in flash mode
20/054/2014 07:54:13 - INFO - Opening device for R/W
20/054/2014 07:54:14 - INFO - Start Flashing
20/054/2014 07:54:14 - INFO - Processing loader
20/054/2014 07:54:14 - INFO - Checking header
20/054/2014 07:54:14 - INFO - Ending flash session
20/054/2014 07:54:14 - ERROR -
20/054/2014 07:54:14 - ERROR - Error flashing. Aborted
I used factory reset and locking and relocking the bootloader but nothing helps.
So..is there any way for me to downgrade?
Try flashing a stock based 4.1 ROM with kernel
Sent from my C5303 using xda app-developers app
How do I flash a 4.1.2 rom that requires 12.0.A.2.254 ?
I'm kind of a begginer with the flashing and everything.
darkkfruit said:
How do I flash a 4.1.2 rom that requires 12.0.A.2.254 ?
I'm kind of a begginer with the flashing and everything.
Click to expand...
Click to collapse
wat exactly you want to know? the software to flash? or ROM's supported?
If software than you can use flashtool to flash your stuff and if supported ROM's than i'll suggest you to go for ExistenZ ROM v1 which is based on 12.0.A.2.254, here http://forum.xda-developers.com/showthread.php?t=2478019
Hi:crying:
I have a C6603... rooted and running on Stock 4.2.2 rooted unlocked boot loader
when i apply it my phone rebooted and never boot again just show red led
help me :crying:
can i unbrick it?
when i using flash tools have error
23/034/2014 11:34:09 - INFO - Selected C6603 / 10.3.1.A.2.67 / Generic PH
23/034/2014 11:34:09 - INFO - Preparing files for flashing
23/034/2014 11:34:45 - INFO - Please connect your device into flashmode.
23/034/2014 11:34:47 - INFO - Opening device for R/W
23/034/2014 11:34:47 - INFO - Reading device information
23/034/2014 11:34:57 - INFO - Unable to read from phone after having opened it.
23/034/2014 11:34:57 - INFO - trying to continue anyway
23/034/2014 11:34:57 - INFO - Start Flashing
23/034/2014 11:34:57 - INFO - Processing loader.sin
23/034/2014 11:34:57 - INFO - Checking header
23/034/2014 11:34:57 - INFO - Ending flash session
23/034/2014 11:34:57 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
23/034/2014 11:34:57 - ERROR - Error flashing. Aborted
23/034/2014 11:34:57 - INFO - Device connected in flash mode
23/034/2014 11:34:58 - INFO - Device disconnected
rfadayi said:
Hi:crying:
I have a C6603... rooted and running on Stock 4.2.2 rooted unlocked boot loader
i install a kernal with over clock and undervolt
[...]
23/034/2014 11:34:57 - INFO - Device connected in flash mode
23/034/2014 11:34:58 - INFO - Device disconnected
Click to expand...
Click to collapse
did you already search for a solution for your Problem on XDA and google? sorry for being a prick, but I would guess you haven't...
It seems thet you can still get into flashmode. try to flash a stock kernel via fastboot flash boot boot.img. find the advanced stock kernel that fits your ROM in the Advanced stock kernel thread in original android development.
also try flashing a rom with fastboot mode.
Coirpre said:
did you already search for a solution for your Problem on XDA and google? sorry for being a prick, but I would guess you haven't...
It seems thet you can still get into flashmode. try to flash a stock kernel via fastboot flash boot boot.img. find the advanced stock kernel that fits your ROM in the Advanced stock kernel thread in original android development.
also try flashing a rom with fastboot mode.
Click to expand...
Click to collapse
i can't go to fastboot just can flashmode
rfadayi said:
i can't go to fastboot just can flashmode
Click to expand...
Click to collapse
Have you tried using the official Sony 'EMMA' restore service for unlocked bootloaders?
Worth a try.
http://developer.sonymobile.com/services/flash-tool/
There is one module in all stock firmwares, named "boot-delivery.xml".
When I try to flash FW with this module - flashtool bringing me an error. Log will be down below.
If I will exclude this file, FW will flash normally, without any errors.
Flashtool gathering info from the phone when flashing boot-delivery.xml. There it is.
Code:
Phone boot version : S1_Boot_Lagan_1.0_2
Also, flashtool is checking boot version of the .xml file, I assume. There it is for the file.
Code:
Boot delivery version : S1_Boot_Lagan_1.1.1_1
So, the question is: Can I update phone boot to version 1.1.1_1 from 1.0_2?
It is needed to flash the whole firmware, without excluding any files.
There is flashtool log:
Code:
24/052/2014 00:52:22 - INFO - Please connect your device into flashmode.
24/052/2014 00:52:23 - INFO - Opening device for R/W
24/052/2014 00:52:23 - INFO - Reading device information
24/052/2014 00:52:23 - INFO - Phone ready for flashmode operations.
24/052/2014 00:52:23 - INFO - Current device : Unknown: Aug 28 2013/08:24:04 - BX903EW346 - Unknown: Aug 28 2013/08:24:04 - Unknown: Aug 28 2013/08:24:04 - Unknown: Aug 28 2013/08:24:04
24/052/2014 00:52:23 - INFO - Start Flashing
24/052/2014 00:52:23 - INFO - Processing loader.sin
24/052/2014 00:52:23 - INFO - Checking header
24/052/2014 00:52:23 - INFO - Flashing data
24/052/2014 00:52:23 - INFO - Processing of loader.sin finished.
24/052/2014 00:52:24 - INFO - Loader : S1_Root_5ca3 - Version : APQ8064_30 / Boot version : S1_Boot_Lagan_1.0_2 / Bootloader status : ROOTED
24/052/2014 00:52:25 - INFO - Parsing boot delivery
24/052/2014 00:52:25 - INFO - Phone boot version : S1_Boot_Lagan_1.0_2. Boot delivery version : S1_Boot_Lagan_1.1.1_1
24/052/2014 00:52:25 - INFO - Going to flash boot delivery
24/052/2014 00:52:25 - INFO - Processing emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin
24/052/2014 00:52:25 - INFO - Checking header
24/052/2014 00:52:25 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
24/052/2014 00:52:25 - INFO - Ending flash session
24/052/2014 00:52:25 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
24/052/2014 00:52:25 - ERROR - Error flashing. Aborted
24/052/2014 00:52:25 - INFO - Device connected in flash mode
24/052/2014 00:52:26 - INFO - Device disconnected
24/052/2014 00:52:28 - INFO - Device connected in flash mode
Thanks, and sorry for my weird English =3
Are you using the latest version of Flashtool? Flashing of the boot bundle is only possible in newer versions (0.9.13 and newer), I believe.
If you are, then I have no idea. You could ask in the Flashtool thread.
Also, your English is just fine.
Sent from my C6603 using Tapatalk
kingvortex said:
Are you using the latest version of Flashtool? Flashing of the boot bundle is only possible in newer versions (0.9.13 and newer), I believe.
Click to expand...
Click to collapse
I'm using Flashtool 0.9.18.2
Every launch flashtool is checking for updates, with no errors.
You should ask in the Flashtool thread then. Androxyde does respond to questions in there.
Sent from my C6603 using Tapatalk
kingvortex said:
You should ask in the Flashtool thread then...
Click to expand...
Click to collapse
Thanks for redirecting.
I'll post updates in this thread.
Happy to help.
Sent from my C6603 using Tapatalk
Still have't found the answer. Don't know what to do.
Tried updating Flashtool?
Try using a different FTF or creating your own with Flashtool. Guide here.
Sent from my C6603
Flashtool's latest version. Tried to create FTF files. First time, dowloaded by XperiFirm, second - by Flashtool. Didn't helped. I see that the problem is in the boot-delivery.xml, which expects newer version of "Boot Lagan", whatever it is. And I see that without flashing boot-delivery.xml, Flashtool isn't updating that boot_lagan.
I don't know what to suggest then. Try a different USB cable/port or even a different PC.
I've flashed FTFs to my device many times with Flashtool and never encountered that error. It's very strange.
Edit - Also, what device do you have? It's odd that it says it's unknown in the Flashtool logs.
Sent from my C6603
C6603.
By the way, I have another C6603. Flashtool flashing it wothout any problems. Two C6603's...
But on second phone boot lagan ver is 1.1.1.1, which is needed to the boot-delivery.
I assumed that if Flashtool can't update it, PC Companion can. And got another problem
Enter to the recovery section in PC Companion, choosing model, it downloads FW and prepares to flashing, after it - asks me to connect turned-off phone with volume-down pressed. I'm connecting it, and guess what... I receive a notice that I have newest firmware and have no need to update it. But I want to recover, not to update!
Okay, flashed .230 firmware, wanted PCC to update FW to .283. Nope. I'm still having newest firmware... What the...
I am having the exact same problem with flashtool (phone boot version and boot version error) and now my phone is stuck on a bootloop which gives me an error saying software update failed. please help if you found a solution. Thanks
alee1730 said:
I am having the exact same problem with flashtool (phone boot version and boot version error) and now my phone is stuck on a bootloop which gives me an error saying software update failed. please help if you found a solution. Thanks
Click to expand...
Click to collapse
Just exclude "bootbundle" from flashing. When you choosing files to flash, there is some checkboxes. Find "BOOTBUNDLE", and choose it.
This way phone is flashing normally.
Hello.
I have the same problem ... someone to fix it ???
Looks like the only way - is to exclude bootbundle from flashing.
Nothing bad happens.