Database Develop

S-Off issues... need help!

i apologize in advance for the noob issues... I am having issues trying to achieve s-off on my htc one. i am rooted right now, running stock 4.3 GPE rom. I have TWRP recovery installed. everything works perfectly. however i would like to do a complete conversion so i will recieve OTA updates from google, and not have to worry about flashing roms. so when i first tried to achieve s-off , i was using revone method. i was getting an error code (-1) then i read that that method wouldnt work, if you were running 4.3. so i then restored my nandroid backup, which i was running 4.1.2. but before flashing my backup i did a system wipe, just to be safe. so i tried revone method again. only now i get error code (-6) so i gave up. but i think when i did my system wipe , i lost my stock back up? so my 2 questions are, where is my nandroid backup? did i lose it when i did a system wipe? and how can i achieve s-off? i am not sure how to tell what firmware version i am running, i didnt see it in settings anywhere, nor do i know what hboot i have (1.44 or 1.54?) how do i tell? thanks guys!

ssreynolds said:
i apologize in advance for the noob issues... I am having issues trying to achieve s-off on my htc one. i am rooted right now, running stock 4.3 GPE rom. I have TWRP recovery installed. everything works perfectly. however i would like to do a complete conversion so i will recieve OTA updates from google, and not have to worry about flashing roms. so when i first tried to achieve s-off , i was using revone method. i was getting an error code (-1) then i read that that method wouldnt work, if you were running 4.3. so i then restored my nandroid backup, which i was running 4.1.2. but before flashing my backup i did a system wipe, just to be safe. so i tried revone method again. only now i get error code (-6) so i gave up. but i think when i did my system wipe , i lost my stock back up? so my 2 questions are, where is my nandroid backup? did i lose it when i did a system wipe? and how can i achieve s-off? i am not sure how to tell what firmware version i am running, i didnt see it in settings anywhere, nor do i know what hboot i have (1.44 or 1.54?) how do i tell? thanks guys!
Click to expand...
Click to collapse
Ok sir, I try to help you.
First, you need to have knowledge with ADB and fastboot, but you should have them both in a folder since you unlocked your device through HTCdev. Then open a terminal and navigate to this particular folder. When you connected your HTC One M7 with the computer and UNINSTALLED HTCSync you can type "adb devices" to ensure you have a connection to your cell phone. Then you have to boot into the bootloader with this command "adb reboot bootloader" and there you see on the first couple of lines your HBOOT version. You'll see it! Then you boot into the recovery from the bootloader and install a ROM from this side that matches a version of rumrunner s off: http://android-revolution-hd.blogspot.ch/p/android-revolution-hd-mirror-site-var.html
Secondly then getting updates from Google you need to proceed these steps:
http://forum.xda-developers.com/showthread.php?t=2358781
This will turn your device into a Google Play Edition!
Hit the thanks button if you understood it, for questions simply ask again

LibertyMarine said:
Ok sir, I try to help you.
First, you need to have knowledge with ADB and fastboot, but you should have them both in a folder since you unlocked your device through HTCdev. Then open a terminal and navigate to this particular folder. When you connected your HTC One M7 with the computer and UNINSTALLED HTCSync you can type "adb devices" to ensure you have a connection to your cell phone. Then you have to boot into the bootloader with this command "adb reboot bootloader" and there you see on the first couple of lines your HBOOT version. You'll see it! Then you boot into the recovery from the bootloader and install a ROM from this side that matches a version of rumrunner s off: http://android-revolution-hd.blogspot.ch/p/android-revolution-hd-mirror-site-var.html
Secondly then getting updates from Google you need to proceed these steps:
http://forum.xda-developers.com/showthread.php?t=2358781
This will turn your device into a Google Play Edition!
Hit the thanks button if you understood it, for questions simply ask again
Click to expand...
Click to collapse
that helps some, lol. so i now know how to find out what hboot version i have (i'm assuming that because i have 4.3 i am running hboot 1.54).... so thank you! i saw the rumrunner thread for the latest s-off. i will proceed with those steps... as far as completing the full google play conversion that actually sounds pretty easy once you have s-off. i can handle that. ( change cid to googl0001 and flash the new ruu, and stock recovery done!)
so now i just need to know what firmware version i have?
did i delete my back up when i did a system wipe?

To reiterate...
I am on hboot 1.44, rooted running a stock GPE 4.3 Rom. Also, I feel stupid, but I can't seem to find out what firmware version I have? So I have tried twice with no avail. First I tried the typical revone method , but i was getting an error code -1, because I was on 4.3. So I flashed my backup, and returned to my stock rom on 4.1.2, and tried again. This time I was getting an error code -6? So I temporarely gave up, until I saw the rumrunner method here on xda. Worst part is when I returned to stock, I did a system wipe before flashing back to my 4.3 GPE rom, and deleted my backup! So I am nervous about flashing anything else, being that I dont have a backup! Long story short, all I want to do is finish a complete GPE conversion, and I need s-off to change my CID. At this point, all I need to do is achieve s-off, flash the GPE CID, and then flash a stock recovery and I'm done! So any thoughts on how to help me achieve s-off without potentionally bricking this thing?
edit: my build number is JWR66Y.H1 , does this mean I am on 3.07.1700.1

ssreynolds said:
To reiterate...
I am on hboot 1.44, rooted running a stock GPE 4.3 Rom. Also, I feel stupid, but I can't seem to find out what firmware version I have? So I have tried twice with no avail. First I tried the typical revone method , but i was getting an error code -1, because I was on 4.3. So I flashed my backup, and returned to my stock rom on 4.1.2, and tried again. This time I was getting an error code -6? So I temporarely gave up, until I saw the rumrunner method here on xda. Worst part is when I returned to stock, I did a system wipe before flashing back to my 4.3 GPE rom, and deleted my backup! So I am nervous about flashing anything else, being that I dont have a backup! Long story short, all I want to do is finish a complete GPE conversion, and I need s-off to change my CID. At this point, all I need to do is achieve s-off, flash the GPE CID, and then flash a stock recovery and I'm done! So any thoughts on how to help me achieve s-off without potentionally bricking this thing?
edit: my build number is JWR66Y.H1 , does this mean I am on 3.07.1700.1
Click to expand...
Click to collapse
boot to bootloader -> FASTBOOT, connect your phone to PC and it will change to FASTBOOT USB (picture attached)
then type "fastboot getvar all" and post it (remove IMEI and s/n before posting), also post the date it shows on that white screen.

nkk71 said:
boot to bootloader -> FASTBOOT, connect your phone to PC and it will change to FASTBOOT USB (picture attached)
then type "fastboot getvar all" and post it (remove IMEI and s/n before posting), also post the date it shows on that white screen.
Click to expand...
Click to collapse
I don't have a camera to take a pic right now, but I can tell you the date is July 5th

ssreynolds said:
I don't have a camera to take a pic right now, but I can tell you the date is July 5th
Click to expand...
Click to collapse
no need for camera, but you still need to post a "fastboot getvar all" (remove IMEI and s/n)

nkk71 said:
no need for camera, but you still need to post a "fastboot getvar all" (remove IMEI and s/n)
Click to expand...
Click to collapse
will do, as soon as I get home!
however if I flash a stock rom like the one I have attached, couldnt I just use revone method (./revone -P)?
http://forum.xda-developers.com/showthread.php?t=2370507 > this rom would put me on firmware version 2.24.401.1

ssreynolds said:
will do, as soon as I get home!
however if I flash a stock rom like the one I have attached, couldnt I just use revone method (./revone -P)?
http://forum.xda-developers.com/showthread.php?t=2370507 > this rom would put me on firmware version 2.24.401.1
Click to expand...
Click to collapse
Why don't you use a RUU and flash the stock recovery, so you can recieve OTA updates and then you can just choose the correct rumrunner s off file and let it do the work. Then you don't really have to worry about the version number and btw. you can simply look it up in the settings. Can you pls ask if I didn't explane it well? Because this is very probable^^

Blue Screen Bricked HTC One - HELP! :(

I tried to update to 4.4, but it gave me a blue screen. I can get into TWRP and Fastboot works.
However, it won't read it as USB on my Windows 8.1, but it sees it on my Windows 7 and OSX. I'm trying everything to get some from of OS running on my HTC One.
Please help me. I'm new to this and I'm scared out of my mind!

If you are soff then connect the phone in fastboot mode and run the google edition ruu.
If not Soff, then post your fastboot getvar all output

SaHiLzZ said:
If you are soff then connect the phone in fastboot mode and run the google edition ruu.
If not Soff, then post your fastboot getvar all output
Click to expand...
Click to collapse
How could I check if S-off, and if it is S-off how would I run the google edition Ruu? I have no way to transfer the zip to my phone.

Yes you do. Start searching the guides littered in this forum.

SaHiLzZ said:
Yes you do. Start searching the guides littered in this forum.
Click to expand...
Click to collapse
I have S-Off, so would I have to sideload the ROM from OSX to my phone?

If you have S-off then either run ruu or do fastboot flash ruu.zip.. Look up nik71 guide how to do that.

BobFaggot said:
I tried to update to 4.4, but it gave me a blue screen. I can get into TWRP and Fastboot works.
However, it won't read it as USB on my Windows 8.1, but it sees it on my Windows 7 and OSX. I'm trying everything to get some from of OS running on my HTC One.
Please help me. I'm new to this and I'm scared out of my mind!
Click to expand...
Click to collapse
im having the same problem
i managed to get into twrp, and install 4.3, but its not 4.4

Bascially we are screwed
I too have the problem with blue screen on upgrade.
I got the OTA upgrade and when installing it, reboots, dropping me to a blue screen.
I have had TWRP with no issues
I have the Bigxie ROM installed.
When I try and get S-OFF and try moonshine, I can not find a version to match my HTC One
My phone was bought from Wind Mobile, and ROM IS is GLOBA001
Is there anyone who can assist us who are stuck in this way?
Thank you!

[Q] [SOLVED] HTC One RUU Required

Hello guys im new to the forum so sorry for any mistakes I make. Im trying to unbrick an HTC One M7 (S - ON). By using the command 'fastboot getvar version-main' I found out that the image required by the phone is 1.27.206.1 . I have searched for days but I cant seem to find the correct RUU. I did find it in a thread on XDA forum but the link was broken. Can anyone help me? If the RUU is not available is there any other way to unbrick the device?
Thanks in Advance!
FIXED: Read the summary below
I was able to find the correct RUU but the files available were incomplete. So with a lot of help from clsA and nkk71 I was able to find an alternative solution. The solution was to download the Android Revolution HD rom for HTC One and use ADB SIDELOAD to transfer the file in the internal storage From there on it was a piece of cake!

metalmouth22 said:
Hello guys im new to the forum so sorry for any mistakes I make. Im trying to unbrick an HTC One M7 (S - ON). By using the command 'fastboot getvar version-main' I found out that the image required by the phone is 1.27.206.1 . I have searched for days but I cant seem to find the correct RUU. I did find it in a thread on XDA forum but the link was broken. Can anyone help me? If the RUU is not available is there any other way to unbrick the device?
Thanks in Advance!
Click to expand...
Click to collapse
Try this one >>
http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353143_signed_2.exe
Alt download
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/

Didnt work
Thank you clsA for replying. I downloaded and launched the .exe file. Unfortunately it give me ERROR 158 - Image Error. What should i do now?

metalmouth22 said:
Thank you clsA for replying. I downloaded and launched the .exe file. Unfortunately it give me ERROR 158 - Image Error. What should i do now?
Click to expand...
Click to collapse
download it again and check the MD5 of your downloaded file

clsA said:
download it again and check the MD5 of your downloaded file
Click to expand...
Click to collapse
Whats MD5 and how to check it? Sorry im kind of new to all this

metalmouth22 said:
Whats MD5 and how to check it? Sorry im kind of new to all this
Click to expand...
Click to collapse
Did you ask Google ?
http://www.droidviews.com/check-md5sum-of-a-file-on-windows-mac-and-linux/

I got it im going to check it right now. I just wanted to confirm something. When I download an RUU isnt it necessary that the image number is same. Like my image is 1.27.206.1 so shouldnt i use an RUU with the same image?

metalmouth22 said:
I got it im going to check it right now. I just wanted to confirm something. When I download an RUU isnt it necessary that the image number is same. Like my image is 1.27.206.1 so shouldnt i use an RUU with the same image?
Click to expand...
Click to collapse
with S-ON, you'll need an RUU which is same or higher version for your MID+CID, which can be inferred from the .206. = O2 UK
you have 1.27.206.1, so you need and RUU which is higher (or equal) to 1.27.206.1; the 1.27.xxx.1 would refer to the actual software version information, the .xxx. indicates the carrier-branded, region, etc. if the version is greater or equal to 1.27.xxx.1 and the .xxx. is 206 then you can run it.
PS: you'll also need a locked/relocked bootloader with s-on, for the ruu to work

nkk71 said:
with S-ON, you'll need an RUU which is same or higher version for your MID+CID, which can be inferred from the .206. = O2 UK
you have 1.27.206.1, so you need and RUU which is higher (or equal) to 1.27.206.1; the 1.27.xxx.1 would refer to the actual software version information, the .xxx. indicates the carrier-branded, region, etc. if the version is greater or equal to 1.27.xxx.1 and the .xxx. is 206 then you can run it.
PS: you'll also need a locked/relocked bootloader with s-on, for the ruu to work
Click to expand...
Click to collapse
nkk71 you are a life saver thank you so much, its all clear now. I searched htc1guru.com and saw that only one link applies to me which clsA pointed out. Its an .exe file and im having MD5 issues. other than that im good to go. Im just trying to find a solution to the MD5 issue.

metalmouth22 said:
nkk71 you are a life saver thank you so much, its all clear now. I searched htc1guru.com and saw that only one link applies to me which clsA pointed out. Its an .exe file and im having MD5 issues. other than that im good to go. Im just trying to find a solution to the MD5 issue.
Click to expand...
Click to collapse
use a download manager
EDIT: if you ever think/thought/will think of S-OFF, now would be the time i guess

nkk71 said:
use a download manager
EDIT: if you ever think/thought/will think of S-OFF, now would be the time i guess
Click to expand...
Click to collapse
Use a download manager for the .exe file? any suggestions? (sorry for the irritating questions)
Haha yeah your right but actually im repairing this phone for a friend. But ill still go ahead and turn S-OFF

metalmouth22 said:
Use a download manager for the .exe file? any suggestions? (sorry for the irritating questions)
Haha yeah your right but actually im repairing this phone for a friend. But ill still go ahead and turn S-OFF
Click to expand...
Click to collapse
s-off will be harder to achieve once you update to a 4.xx RUU
as for download managers, there are plenty, if you want a free (and pretty decent one), i usually use FireFox + DownThemAll add-in

nkk71 said:
s-off will be harder to achieve once you update to a 4.xx RUU
as for download managers, there are plenty, if you want a free (and pretty decent one), i usually use FireFox + DownThemAll add-in
Click to expand...
Click to collapse
I used Internet Download manager and again downloaded the .exe but Its still not working. I have downloaded it multiple times and it even passed the MD5 test. However, when i check the properties of the .exe the size and size on disk are different from each other. They are different only by 300 to 400 KB, does this have anything to do with the problem im having?

metalmouth22 said:
I used Internet Download manager and again downloaded the .exe but Its still not working. I have downloaded it multiple times and it even passed the MD5 test. However, when i check the properties of the .exe the size and size on disk are different from each other. They are different only by 300 to 400 KB, does this have anything to do with the problem im having?
Click to expand...
Click to collapse
if the MD5 check passed (ie the file you downloaded gives an MD5 hash = 4961fdbbadba53c9640f3638f56faec1) then the file is good.
but the 4.xx RUUs are known to be very sensitive to PC configuration, USB ports, etc. so you should try it with a plain vanilla setup of Windows 7 + USB2 port.
Though (just a thought), why not flash a custom recovery and ROM to get your device back to life, (and possibly even S-OFF).... how did you brick it anyway?
can you also post a "fastboot getvar all" (excluding IMEI and s/n)

nkk71 said:
if the MD5 check passed (ie the file you downloaded gives an MD5 hash = 4961fdbbadba53c9640f3638f56faec1) then the file is good.
but the 4.xx RUUs are known to be very sensitive to PC configuration, USB ports, etc. so you should try it with a plain vanilla setup of Windows 7 + USB2 port.
Though (just a thought), why not flash a custom recovery and ROM to get your device back to life, (and possibly even S-OFF).... how did you brick it anyway?
can you also post a "fastboot getvar all" (excluding IMEI and s/n)
Click to expand...
Click to collapse
I think you are right, something is wrong with that file.
If there is any other way to get this thing going please let me know. It's actually a friend's phone and i think he bricked it while installing a rom.I ran the command, this is what i got.

metalmouth22 said:
I think you are right, something is wrong with that file.
If there is any other way to get this thing going please let me know. It's actually a friend's phone and i think he bricked it while installing a rom.I ran the command, this is what i got.
Click to expand...
Click to collapse
why don't you go ahead and:
1- unlock bootloader
2- flash custom recovery
3- flash custom ROM
4- get s-off
5- enjoy
how does that sound?

nkk71 said:
why don't you go ahead and:
1- unlock bootloader
2- flash custom recovery
3- flash custom ROM
4- get s-off
5- enjoy
how does that sound?
Click to expand...
Click to collapse
That sounds good ! Just need to confirm that the bootloader on this phone is relocked not locked. do i need to visit htcdev and follow the protocol to unlock it? secondly by custom recovery you mean CWM or TWRP? I already have TWRP on the phone.

metalmouth22 said:
That sounds good ! Just need to confirm that the bootloader on this phone is relocked not locked. do i need to visit htcdev and follow the protocol to unlock it? secondly by custom recovery you mean CWM or TWRP? I already have TWRP on the phone.
Click to expand...
Click to collapse
to unlock (with s-on), yes you'd need to HTCdev again, BUT if you already have TWRP installed, i recommend you flash the following ROM:
http://forum.xda-developers.com/showpost.php?p=48955645&postcount=251
you can either push it or sideload it to TWRP, once it boots up, use revone to s-off
http://forum.xda-developers.com/showthread.php?t=2314582
revone will also allow to unlock bootloader
once you have s-off, the options are almost limitless, but please remember to flash only things meant for your phone/modelid ... flashing a wrong hboot for example will end up bricking your phone (not trying to scare you but don't think just cause you have s-off, you can now flash an HTC M8 firmware/hboot)

nkk71 said:
to unlock (with s-on), yes you'd need to HTCdev again, BUT if you already have TWRP installed, i recommend you flash the following ROM:
http://forum.xda-developers.com/showpost.php?p=48955645&postcount=251
you can either push it or sideload it to TWRP, once it boots up, use revone to s-off
http://forum.xda-developers.com/showthread.php?t=2314582
revone will also allow to unlock bootloader
once you have s-off, the options are almost limitless, but please remember to flash only things meant for your phone/modelid ... flashing a wrong hboot for example will end up bricking your phone (not trying to scare you but don't think just cause you have s-off, you can now flash an HTC M8 firmware/hboot)
Click to expand...
Click to collapse
So if i use the rom from the first link i will not have to unlock the bootloader? If thats the case then great ill get on it. Thanks a lot nkk71 and sorry for being a pain =P

metalmouth22 said:
So if i use the rom from the first link i will not have to unlock the bootloader? If thats the case then great ill get on it. Thanks a lot nkk71 and sorry for being a pain =P
Click to expand...
Click to collapse
as long as you already have custom recovery on your phone, it should work (honestly, i've never tried, but it should work)
one of the reasons for HTCdev unlock, is to get a custom recovery on your phone (which you cannot do with S-ON and locked/relocked bootloader)
good luck

Please help, can't get back to stock. No OS build number

So I am trying to return to stock unrooted but when I was trying to find the right RUU to run, I saw that I had no OS build number so I didn't know which one to run. I ran one and soft bricked but was able to recover. Have any of you guys had this happen before? Do any of you guys know a way that I could return to stock? Any help is greatly appreciated.

I'm not sure why you have no OS. You need to lock your bootloader with fastboot (since you are s-on) and then run the RUU. I'd use this one (first link in OP):
http://forum.xda-developers.com/showthread.php?t=2795856

coal686 said:
I'm not sure why you have no OS. You need to lock your bootloader with fastboot (since you are s-on) and then run the RUU. I'd use this one (first link in OP):
http://forum.xda-developers.com/showthread.php?t=2795856
Click to expand...
Click to collapse
Thanks for responding. I already tried that and it doesn't work since I have no OS build number, I can't run a RUU. When I ran it the first time, it wouldn't let me get past the part after it erase everything because my RUU build numbers didn't match my build numbers so I was soft bricked for a while.

Reflash your firmware.

MFOsaka said:
Reflash your firmware.
Click to expand...
Click to collapse
I will try that when I get a chance. Thanks for replying.

Htc one m7 sprint stuck at Grey screen while trying to change cid

I was trying to change the cid of my m7 but after flashing some files it just stuck on this Grey screen.. the tutorial i was following said that i can use adb commands on this screen but i cant because this phone is recognised as malfunctioning now (after that adb command) in my pc with windows 10.. i don't know much abt these stuff but it would be really helpful if i can revive this phone.
If u need any info just le me know..ill post it asap.

RIPhones said:
I was trying to change the cid of my m7 but after flashing some files it just stuck on this Grey screen.. the tutorial i was following said that i can use adb commands on this screen but i cant because this phone is recognised as malfunctioning now (after that adb command) in my pc with windows 10.. i don't know much abt these stuff but it would be really helpful if i can revive this phone.
If u need any info just le me know..ill post it asap.
Click to expand...
Click to collapse
Flashing files to change CID? CID can be changed using "fastboot oem writecid <your_desired_cid>", no file flashing required.
Are you talking about MID change? Hope you did not followed the crappy guide making users flash an eng bootloader?
And why are you trying to change your CID (or MID) on a Sprint phone?

alray said:
Flashing files to change CID? CID can be changed using "fastboot oem writecid <your_desired_cid>", no file flashing required.
Are you talking about MID change? Hope you did not followed the crappy guide making users flash an eng bootloader?
And why are you trying to change your CID (or MID) on a Sprint phone?
Click to expand...
Click to collapse
yes i was following that "crappy guide" as i was trying to change mid because i was unable to flash Stock RUU using adb ..it was showing some error.
PS. i don't have any recovery installed.

RIPhones said:
yes i was following that "crappy guide" as i was trying to change mid because i was unable to flash Stock RUU using adb ..it was showing some error.
PS. i don't have any recovery installed.
Click to expand...
Click to collapse
There are much more up-to-date and safer guides to change your MID. Did you read to moderator comment (in red) before reading the guide? The last pages of the thread? The guide you just followed made you flash an engineering bootloader made for the Droid DNA, not even designed for the M7 (hence the gray screen). This bootloader version is 1.39 which mean it will not allow you to connect (use fastboot) with any Windows 8 or 10 computer. So from now you must use a Win 7, XP, Linux or Mac machine to be able to use fastboot commands.
If your goal was to restore the original Sprint MID and CID on your phone that's ok. If you are trying to change your MID/CID to something else than Sprint, this is totally useless since only Sprint RUU will flash correctly on a Sprint phone (no conversion possible for this variant).
What was the error when flashing the RUU?
The first step out of this will be to flash twrp recovery (the wls version) so you can revert your MID back to Sprint and flash an old sprint RUU or firmware.zip.

alray said:
There are much more up-to-date and safer guides to change your MID. Did you read to moderator comment (in red) before reading the guide? The last pages of the thread? The guide you just followed made you flash an engineering bootloader made for the Droid DNA, not even designed for the M7 (hence the gray screen). This bootloader version is 1.39 which mean it will not allow you to connect (use fastboot) with any Windows 8 or 10 computer. So from now you must use a Win 7, XP, Linux or Mac machine to be able to use fastboot commands.
If your goal was to restore the original Sprint MID and CID on your phone that's ok. If you are trying to change your MID/CID to something else than Sprint, this is totally useless since only Sprint RUU will flash correctly on a Sprint phone (no conversion possible for this variant).
What was the error when flashing the RUU?
The first step out of this will be to flash twrp recovery (the wls version) so you can revert your MID back to Sprint and flash an old sprint RUU or firmware.zip.
Click to expand...
Click to collapse
i can't remember that error as it was done a week ago but when i was trying to flash twrp it was just was failing. ill get back to u once i install ubuntu on my system and try with that.. but what should i do first after connecting it to a linux machine? should i try to install recovery ?? please help me out here.

RIPhones said:
i can't remember that error as it was done a week ago but when i was trying to flash twrp it was just was failing. ill get back to u once i install ubuntu on my system and try with that.. but what should i do first after connecting it to a linux machine? should i try to install recovery ?? please help me out here.
Click to expand...
Click to collapse
you'll first need to flash back a Sprint bootloader. Then flash twrp and revert your MID and CID back to sprint using twrp's terminal and finally flash a sprint RUU.