Database Develop

Did i brick it already?

Like an idiot i flash a mod for a de-odexed ROM to my stock ROM UK Three M7. So stuck at the boot screen.
The problem is i cant seem to do anything about it. I have no back up (I know !!!), no ROM file on the device to flash and i cant seem to push anything to it.
ADB just says no device found even though it was working ok. Can anyone help? Ive tried it on multiple PCs.

AW: Did i brick it already?
Go to recovery Mount your memory to pc. Copy a Rom. After that flash Boot img via fastboot and then Rom from recovery.
Sent from my HTC One X using xda premium

It wont mount /sdcard, im on CWM recovery

AW: Did i brick it already?
You have PC connected and it wont mount..
Sent from my HTC One X using xda premium
---------- Post added at 12:48 PM ---------- Previous post was at 12:46 PM ----------
Maybe just try facrory reset from recovery..
Sent from my HTC One X using xda premium

Yeah it wont mount, nothing happens.
I cant push anything if it wont mount obviously, i could try doing it from external sd via OTG cable.. but i dont have one.

AW: Did i brick it already?
Did you tried with ruu?
Sent from my HTC One X using xda premium

As understand it if you have an S-ON device(i do) you have to use the right onee or it will fail.Its Three branded unit,so i need a three RUU. There isnt one out there.

RUUs only work if adb can see detect it
Have you tried going through fastboot? Just fastboot some boot.img to get it to boot, then put a ROM on your sdcard

It sees it now. I can get into recovery (CWM) and fastboot, but i have nothing to flash on the phone, i cant get anything onto the phone to flash! I try ADB sideload, it gets to100% but it says..
E: Can't open /tmp/update.zip
(bad)
I tried pushing to the SD card but the recovery then doesn't see the ZIP, its just not there.
/sdcard wont mount in CWM, nothing happens.
I tried a boot.img from the Maximus thread.

Ok its now accepted the sideload! Ive installed the ROM and its rebooted...
Its back!!!!!!

rovex said:
Ok its now accepted the sideload! Ive installed the ROM and its rebooted...
Its back!!!!!!
Click to expand...
Click to collapse
Awesomesauce
If you could get into recovery, theres a toggle / enable mass storage mode too? You couldve done that to mount your sdcard

I think it won't work
CNexus said:
Awesomesauce
If you could get into recovery, theres a toggle / enable mass storage mode too? You couldve done that to mount your sdcard
Click to expand...
Click to collapse

AW: Did i brick it already?
CNexus said:
Awesomesauce
If you could get into recovery, theres a toggle / enable mass storage mode too? You couldve done that to mount your sdcard
Click to expand...
Click to collapse
Thats what I meant before
But nice to have your device back. I'm waiting for my One too
Sent from my HTC One X using xda premium

Yeah there is no toggle in CWM and the stock recovery I reflashed was only a test build, and didnt actually do anything.
Well its now working again fine. I dont really know why it worked, but it did. It was suggested i try the Aroma file manager first, which sideloaded OK and let me browse the file system. I then re-downloaded the ROM I was trying to use (Maximus) and tried that. It worked with no errors, although the Aroma installer crashed the first time through, which I understand isnt unusual on the One.
Seems i didnt need to access the SDcard at all, it was just a problem with sideloading. It may have been a corrupt ROM download.
Needless to say i now have a CWM backup, Titanium backup and a ROM file on the SDcard just in case.

You cant mount USB storage in recovery on the HTC One, you can only use ADB Sideload to send the ROM if your stuck in a bootloop or if youve erased the system partition:
I have uploaded the latest binaries to my dev host account.
1. Download and extract these to a directory and copy the rom over into the same directory.
2. Boot up your phone into twrp recovery or a recovery that supports ADB Sideload.
3. Select advanced and adbsideload (Your phone will be waiting for the file transfer.)
4. Open command prompt in the above directory you created with the binaries and rom.
5. Issue command "adb devices" (You should get the serial number with sideload next to it)
6. Finally issue command "adb sideload rom.zip" (rom.zip will be the name of your rom)
This will start sending your rom to the handset and will automatically install.
Hope the above helps
Link to Binaries:
ADB Binaries

That's what I was doing, it simply wasn't working. It might have been a corrupt ROM download.

rovex said:
That's what I was doing, it simply wasn't working. It might have been a corrupt ROM download.
Click to expand...
Click to collapse
Could very well be. Happens more often than you would think
But the mass storage thing is strange....I've seen it on almost all recoveries, but i know TWRP no longer has it in their newer builds, maybe the same thing happened with CWM?

Please help unbrick a Telus HTC One

Hi everyone.
I unlocked the bootloader and rooted a Telus HTC One. But the latest flash went wrong and I went into bootloop. Somehow, I seem to have gotten myself into a situation where there's no ROM installed. I can still get into Bootloader and Recovery. When I try to start the phone, it's stuck at "HTC Quietly Brilliant" screen.
I've tried factory resetting, wiping everything, relocking the bootloader and loading the Factory RUU Zip using the All-In-One tool kit by Hasoon, and sideloading a ROM. Nothing seems to work. I also managed to push a ROM to the phone using the adb push command. When I try to install it using TWRP, I get an error msg "Unable to open zip file." It failed using CWM recovery as well.
When I plug the phone into a computer, it recognizes something is plugged in. But I can't open the drive at all. I get error msgs when I try to mount sdcard, system, data, anything. Things don't seem to be mounting/recognized at all. HTC sync and drivers are installed.
Experts, what else can I try?

Try downloading a Telus clean nandroid backup. Then go back into recovery (depends of what nandroid you get, make sure you have the right recovery, so if you download a CWM nandroid use CWM).

G-Bus said:
Try downloading a Telus clean nandroid backup. Then go back into recovery (depends of what nandroid you get, make sure you have the right recovery, so if you download a CWM nandroid use CWM).
Click to expand...
Click to collapse
Thanks for the suggestion. Not having any luck finding a Telus nandroid. Would it make matters worse if I try to restore from a non-Telus nandroid? My phone can't mount the /sdcard right now. Suppose I'll have to adb push it to the phone again?

runlsd said:
Thanks for the suggestion. Not having any luck finding a Telus nandroid. Would it make matters worse if I try to restore from a non-Telus nandroid? My phone can't mount the /sdcard right now. Suppose I'll have to adb push it to the phone again?
Click to expand...
Click to collapse
You don't mount the sdcard in HTC One you mount the data partition.
Also what happens if you sideload a ROM?
PHP:
adb sideload <ROM>
Have you tried erasing cache after installing a ROM if successful?

Riyal said:
You don't mount the sdcard in HTC One you mount the data partition.
Also what happens if you sideload a ROM?
PHP:
adb sideload <ROM>
Have you tried erasing cache after installing a ROM if successful?
Click to expand...
Click to collapse
When I sideloaded, It said
Can't Open /sdcard/rom.zip" (bad).
Installation aborted
Sideloading now gives me this error
failed to open driver control: No such file or directory
Restarting adbd
hmm, okay. I thought since recovery says "Install zip from sdcard" i thought /sdcard needed to be mounted. /data is mounted at the moment. No connectivity between computer and the phone unless through the All-in-one kit.

Riyal said:
Have you tried erasing cache after installing a ROM if successful?
Click to expand...
Click to collapse
And I haven't had successfully installed a ROM since I bricked the phone.

Install a custom ROM and kernel on your USB from the computer, mount the USB in Twrp using the otg cable. Flash ROM, if it doesnt boot, flash the kernel.
Flashing the kernel fixed it for me.
Another way is to use an adb pusher app and transfer thevfiles to your SD card.
Sent from my Nexus 10 using XDA Premium HD app

Thanks everyone. Somehow it sideloaded when I tried for the twentieth time.

Help. Htc one brick

please help me..
I try to format sdcard on my htc one and i got some problem. the problem my h1 can't process RUU. always error during installation. please help me.

kAskAdu said:
please help me..
I try to format sdcard on my htc one and i got some problem. the problem my h1 can't process RUU. always error during installation. please help me.
Click to expand...
Click to collapse
flash a custom recovery onto your phone then sideload or use otg cable to get a rom back onto your phone

your device is not bricked as long as you are s-on. it's almost impossible to brick it with s-on. follow ratcoms instructions and it should work again.

ratcom said:
flash a custom recovery onto your phone then sideload or use otg cable to get a rom back onto your phone
Click to expand...
Click to collapse
but if i try adb sideload <filename>. i got problem my devices not found.

kAskAdu said:
but if i try adb sideload <filename>. i got problem my devices not found.
Click to expand...
Click to collapse
you know that you have to actually boot to recovery and choose install zip via sideload to sideload right?

George_Mn said:
you know that you have to actually boot to recovery and choose install zip via sideload to sideload right?
Click to expand...
Click to collapse
but, i confused with my internal storage ( 0 mb ) on my h1. i can't access everything i just on recovery mode

stuck on same problem, but loaded the rom via adb push command to /sdcard
but cant flash as it keeps saying
Error flashing zip /sdcard/cm101.zip
Updating partition details
E:Unable to mount /cache
E:Unable to mount /data
E:Unable to mount internal storage

moloch said:
stuck on same problem, but loaded the rom via adb push command to /sdcard
but cant flash as it keeps saying
Error flashing zip /sdcard/cm101.zip
Updating partition details
E:Unable to mount /cache
E:Unable to mount /data
E:Unable to mount internal storage
Click to expand...
Click to collapse
moloch,
You can't mount anything in recovery because you locked your bootloader. I sent you a PM.

kAskAdu said:
but if i try adb sideload <filename>. i got problem my devices not found.
Click to expand...
Click to collapse
Did you actually boot into recovery and select the sideload mode? What recovery are you using? Try "adb devices" once in sideload it should return "serial number sideload".
AT&T HTC One
BaadNewz's InsertCoin 3.0-7
Flar2's Bulletproof 3.4

Same issue
crushalot said:
moloch,
You can't mount anything in recovery because you locked your bootloader. I sent you a PM.
Click to expand...
Click to collapse
I'm having the same issue but my bootloader does say it's unlocked. Trust me when I say I have been searching on the topic for hours. Any help would be greatly appreciated.

Strange Brick, Sdcard empy,TWRP unable to mount sd dacr,s-on, ruu not working

Hi everybody, i have htc m7, sd card is empy, twrp working but doesn't work while i try to mount something. I can't use adb push And OTG cable works but on twrp the OTG0 folder seems empy but on pc it doesn't..i can't install ruu because s-on and i can put to s-off only if the phone doesn't go to bootloop.:silly:
-twrp working
-no rom to flash
-unable to mount /data /sdcard
-OTG usb empy
-no ruu
-S-on
-unlocked
Thanks to you , XDA, and for all you guys

dexploit said:
Hi everybody, i have htc m7, sd card is empy, twrp working but doesn't work while i try to mount something. I can't use adb push And OTG cable works but on twrp the OTG0 folder seems empy but on pc it doesn't..i can't install ruu because s-on and i can put to s-off only if the phone doesn't go to bootloop.:silly:
-twrp working
-no rom to flash
-unable to mount /data /sdcard
-OTG usb empy
-no ruu
-S-on
-unlocked
Thanks to you , XDA, and for all you guys
Click to expand...
Click to collapse
What version of Twrp recovery are you using?try to flash the Twrp either 2.3.3 or later but not the new version. Then try adb sideload
Sent from my HTC One using Tapatalk

dexploit said:
Hi everybody, i have htc m7, sd card is empy, twrp working but doesn't work while i try to mount something. I can't use adb push And OTG cable works but on twrp the OTG0 folder seems empy but on pc it doesn't..i can't install ruu because s-on and i can put to s-off only if the phone doesn't go to bootloop.:silly:
-twrp working
-no rom to flash
-unable to mount /data /sdcard
-OTG usb empy
-no ruu
-S-on
-unlocked
Thanks to you , XDA, and for all you guys
Click to expand...
Click to collapse
I'm guessing you have HTC drivers installed.
Connect USB to windows Boot into Recovery, selecr Advanced, choose Sideload, then swipe to start sideload
then with adb use command 'adb devices'
Does your phone up? it'll have a name beginning with sideload
If it doesn't, possible driver issue. What OS are you using?

dexploit said:
Hi everybody, i have htc m7, sd card is empy, twrp working but doesn't work while i try to mount something. I can't use adb push And OTG cable works but on twrp the OTG0 folder seems empy but on pc it doesn't..i can't install ruu because s-on and i can put to s-off only if the phone doesn't go to bootloop.:silly:
-twrp working
-no rom to flash
-unable to mount /data /sdcard
-OTG usb empy
-no ruu
-S-on
-unlocked
Thanks to you , XDA, and for all you guys
Click to expand...
Click to collapse
Did u mount USB OTG ??

CYNiCAL2KX said:
I'm guessing you have HTC drivers installed.
Connect USB to windows Boot into Recovery, selecr Advanced, choose Sideload, then swipe to start sideload
then with adb use command 'adb devices'
Does your phone up? it'll have a name beginning with sideload
If it doesn't, possible driver issue. What OS are you using?
Click to expand...
Click to collapse
yes lastest driver installed. i have twrp 2.7, i've done adb sideload customROM.zip but than ?

dexploit said:
yes lastest driver installed. i have twrp 2.7, i've done adb sideload customROM.zip but than ?
Click to expand...
Click to collapse
CYNiCAL2KX said:
I'm guessing you have HTC drivers installed.
Connect USB to windows Boot into Recovery, selecr Advanced, choose Sideload, then swipe to start sideload
then with adb use command 'adb devices'
Does your phone up? it'll have a name beginning with sideload
If it doesn't, possible driver issue. What OS are you using?
Click to expand...
Click to collapse
Did you do 'ADB devices'???

raghav kapur said:
Did u mount USB OTG ??
Click to expand...
Click to collapse
yes but on twrp in logs page it says "unable to mount otg" and "unable to mount /data /system /cache" Seems like the one doesn't recognize the partition

CYNiCAL2KX said:
Did you do 'ADB devices'???
Click to expand...
Click to collapse
yes and "sending: 'HTC_One_-_****************_32.0.0 (2).zip' 100%"
but than ? Phone bootloop and where is the rom that i've placed ?

dexploit said:
yes and "sending: 'HTC_One_-_****************_32.0.0 (2).zip' 100%"
but than ? Phone bootloop and where is the rom that i've placed ?
Click to expand...
Click to collapse
The phone bootlooped? Strange. TWRP usually runs the script straight after sideload. The zip is on sdcard/0/sideload.zip
What happens when you try to install the sideload.zip?

CYNiCAL2KX said:
The phone bootlooped? Strange. TWRP usually runs the script straight after sideload. The zip is on sdcard/0/sideload.zip
What happens when you try to install the sideload.zip?
Click to expand...
Click to collapse
in in twrp if i go to install i see only empy sdcard!!! but the adb sideload command was completed at 100 %...no errors, nothing..(yesterday i had cwm 5 and always all folder empy and unable to mount all !!!!)

Flash latest CWM recovery the same way you flash Twrp.twrp is unsecure coz you deleted all your system data in twrp recovery.after flash,cwm shoud work,and adb too.then put superuser.zip on internal storage,install thru cwm to gain root.flash arhd 52.0 rom to get it boot.
Sent from my HTC One using xda app-developers app

dexploit said:
in in twrp if i go to install i see only empy sdcard!!! but the adb sideload command was completed at 100 %...no errors, nothing..(yesterday i had cwm 5 and always all folder empy and unable to mount all !!!!)
Click to expand...
Click to collapse
I think you have a corrupted partition. Try this: http://android-revolution-hd.blogspot.co.uk/2013/10/fix-data-htc-one.html
Just something I found with a quick search but, I hope that will fix your problem, if not you should google around for more alternative methods to repairing a corrupted data partition
How Do I Recognise The Problem?
When trying to mount the DATA partition from inside the custom recovery using the mount /data command you will most likely see this output: mount: mounting /dev/block/mmcblk0p37 on /data failed: Invalid argument
To be 100% sure you can check filesystem structure with the following command: /sbin/e2fsck -n -f /dev/block/mmcblk0p37
Good luck
Click to expand...
Click to collapse
---------- Post added at 11:14 PM ---------- Previous post was at 11:06 PM ----------
shawek said:
Flash latest CWM recovery the same way you flash Twrp.twrp is unsecure coz you deleted all your system data in twrp recovery.after flash,cwm shoud work,and adb too.then put superuser.zip on internal storage,install thru cwm to gain root.flash arhd 52.0 rom to get it boot.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Read the full thread before posting
He used CWM but it shows no files on sdcard

Thanks, but doesn't work. Buto now i can mount sd card, but not /system and /cache!

shawek said:
Flash latest CWM recovery the same way you flash Twrp.twrp is unsecure coz you deleted all your system data in twrp recovery.after flash,cwm shoud work,and adb too.then put superuser.zip on internal storage,install thru cwm to gain root.flash arhd 52.0 rom to get it boot.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
So, I did part of this because I'm having a similar issue. I was able to flash CWM, but unable to mount USB storage in order to get this thing booted up. I tried to sideload and that's unsuccessful.
When I use the devices command in adb, it doesn't list it. However, when I typed devices in fastboot, it listed it. Obviously, I'm starting to get pissed.

i had a same problem,needed 3 days to solve it.I understand that adb cant recognize the device(i was getting that error too)and(typing "adb devices" sometimes shows the device)--,but can you put a zip file on internal storage of the phone,now when you have cwm recovery?try to get many informations as you can,read,you will fix this.i didnt try to fix partitions mentioned above,but you can try with that.
Sent from my HTC One using xda app-developers app

It seems like your data partition is trashed, and maybe you need to format it. This is more aggressive than wiping /sdcard and /data. TWRP can do this, and CWM probably can, too. Also, "fastboot devices" should only show the phone when it's in fastboot mode, and "adb devices" will show the phone when it's in recovery or running Android (with USB Debugging enabled).
If you want to poke around a little bit before taking this drastic step, I would try one more time to get adb connected--boot the phone to recovery, wait a few seconds, attach the cable, then give "adb devices" another try. Also, I don't know if the driver necessary for ADB is the same as fastboot. It's possible your computer is configured to do one but not the other. Is there someone else's computer you can ask to use for a few minutes to check this?

Solved unmount /system /cache /data
i've format all the formattable things in twrp , reboot and used adb push and after flash cyanogenmod! ! Thank you all guys !:good:

[Q] 6 Hours later - Still Bricked.

Hello,
First and foremost I would like to give the important information away:
Phone: HTC One (M7)
Carrier: Rogers (I think same as AT&T?)
State: Unlocked, S-On, TWRP v2.7.1.0 installed, Hboot 1.57 and without an OS
The story:
Advance Wiped Everything:
So I didn't transfer the ROM before I used the "wipe" option in TWRP and deleted everything (using advanced wipe). Now I'm left with a phone that is "soft-bricked".
ADB Sideload
I rooted and installed TWRP my phone using QbKing77's guide
I tried googling a soultion and found a guide that told me to enter TWRP->Advanced->ADB Sideload and realized my phone cannot enter ABD sideload mode...so I'm like there must be another way, so I look up ADB push and again the same problem...it wont work. ADB shows: "error:device not found" in cmd.
Drivers
Now I think the problem is in the driver and I have reinstalled all the correct drivers (including Android SDK Google USB drivers). Then it strikes me that if the problem is with the drivers why was I able to use fastboot and not ADB?
RUU
After 4 hours of trying I gave up and was like lets try a RUU, same freaking problem. I get error code 155 which after researching seems to be pointing at my phone's bootloader not being "Re-locked" when the freaking screen says ***tampered*** re-locked****. So now I have unlocked it again and relocked the bootloader again, still no luck. I tried downloading different RUUs for both Rogers and AT&T and both give that exact same error even after "fastboot oem lock" command. After giving up on that I go back to try to entter ADB sideload mode via TWRP, I downloaded TWRP 2.5-2.7 and none of them would allow me to enter ADB sideload mode.. As of now its been 1 hour and TWRP still states: "Starting ADB sideload feature...".
Conclusion
If there is any way to get my phone to it's stock settings (IDC about the tampered, and relocked messages) I am all ears, I'm sorry if the information given isn't organized enough, but I'm very exhausted at this point. I will be more than happy to answer any more questions anybody might have.
Thanks!

haqsaber said:
Hello,
First and foremost I would like to give the important information away:
Phone: HTC One (M7)
Carrier: Rogers (I think same as AT&T?)
State: Unlocked, S-On, TWRP v2.7.1.0 installed, Hboot 1.57 and without an OS
The story:
Advance Wiped Everything:
So I didn't transfer the ROM before I used the "wipe" option in TWRP and deleted everything (using advanced wipe). Now I'm left with a phone that is "soft-bricked".
ADB Sideload
I rooted and installed TWRP my phone using QbKing77's guide
I tried googling a soultion and found a guide that told me to enter TWRP->Advanced->ADB Sideload and realized my phone cannot enter ABD sideload mode...so I'm like there must be another way, so I look up ADB push and again the same problem...it wont work. ADB shows: "error:device not found" in cmd.
Drivers
Now I think the problem is in the driver and I have reinstalled all the correct drivers (including Android SDK Google USB drivers). Then it strikes me that if the problem is with the drivers why was I able to use fastboot and not ADB?
RUU
After 4 hours of trying I gave up and was like lets try a RUU, same freaking problem. I get error code 155 which after researching seems to be pointing at my phone's bootloader not being "Re-locked" when the freaking screen says ***tampered*** re-locked****. So now I have unlocked it again and relocked the bootloader again, still no luck. I tried downloading different RUUs for both Rogers and AT&T and both give that exact same error even after "fastboot oem lock" command. After giving up on that I go back to try to entter ADB sideload mode via TWRP, I downloaded TWRP 2.5-2.7 and none of them would allow me to enter ADB sideload mode.. As of now its been 1 hour and TWRP still states: "Starting ADB sideload feature...".
Conclusion
If there is any way to get my phone to it's stock settings (IDC about the tampered, and relocked messages) I am all ears, I'm sorry if the information given isn't organized enough, but I'm very exhausted at this point. I will be more than happy to answer any more questions anybody might have.
Thanks!
Click to expand...
Click to collapse
first, do not use twrp 2.7.1.0 but 2.6.3.3 and use HTC divers not Google drivers. you will then be able to sideload or push a rom to your phone. Also make sure to use at least adb 1.0.29, sideload will not work on previous version.

alray said:
first, do not use twrp 2.7.1.0 but 2.6.3.3 and use HTC divers not Google drivers. you will then be able to sideload or push a rom to your phone. Also make sure to use at least adb 1.0.29, sideload will not work on previous version.
Click to expand...
Click to collapse
Thanks for your response.
I have flashed TWRP 2.6.3.3, and when I boot into recovery it asks me for a password? I was still unable to boot up ADB sideload (This time I get an error message instead of it failing to start all together). But I was able to access the adb shell and was able to push a custom rom into the device into /data/ and then tried installing it, which failed.
I flashed the ROM using this command: fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
then after the transfer was done typed: fastboot erase cache
as of now when I type adb devices into the command prompt my phone is being detected which is an improvement from last night! Thanks!

haqsaber said:
Thanks for your response.
I have flashed TWRP 2.6.3.3, and when I boot into recovery it asks me for a password? I was still unable to boot up ADB sideload (This time I get an error message instead of it failing to start all together). But I was able to access the adb shell and was able to push a custom rom into the device into /data/ and then tried installing it, which failed.
Click to expand...
Click to collapse
you don't have to use an adb shell to push a rom, only use adb normally from your computer with the phone booted in recovery. And the destination of the rom when you push it is not /data, its /sdcard
adb push name_of_rom.zip /sdcard/
when complete, select "install" in recovery and choose your rom.

alray said:
you don't have to use an adb shell to push a rom, only use adb normally from your computer with the phone booted in recovery. And the destination of the rom when you push it is not /data, its /sdcard
adb push name_of_rom.zip /sdcard/
when complete, select "install" in recovery and choose your rom.
Click to expand...
Click to collapse
The rom.zip is now in my /sdcard/ folder and when I try to install it I get the following error:
Code:
Updating partition details....
E:Unable to mount '/cache'
E:Unable to mount '/cache'
E:Unable to mount '/cache'
Error Flashing zip '/sdcard/rom.zip'
Updating partition details...
E:Unable to mount '/cache'
and my ADB version is 1.0.31
Edit: So I went in the mount option and noticed that "cache" was selected so I deselected it and tried to flash again and it just said
Code:
Error Flashing zip '/sdcard/rom.zip'
Updating partition details...
So now I'm thinking there must be something wrong with the ROM, so i'm downloading and will retry.
Code:
KitKat (Android 4.4.3 + HTC Sense 6.0)
Download Android Revolution HD 81.0
Nope, that didn't work either. Could it be that I need to put in that password first? If so what is the TWRP password?

haqsaber said:
The rom.zip is now in my /sdcard/ folder and when I try to install it I get the following error:
Code:
Updating partition details....
E:Unable to mount '/cache'
E:Unable to mount '/cache'
E:Unable to mount '/cache'
Error Flashing zip '/sdcard/rom.zip'
Updating partition details...
E:Unable to mount '/cache'
and my ADB version is 1.0.31
Edit: So I went in the mount option and noticed that "cache" was selected so I deselected it and tried to flash again and it just said
Code:
Error Flashing zip '/sdcard/rom.zip'
Updating partition details...
So now I'm thinking there must be something wrong with the ROM, so i'm downloading and will retry.
Code:
KitKat (Android 4.4.3 + HTC Sense 6.0)
Download Android Revolution HD 81.0
Nope, that didn't work either. Could it be that I need to put in that password first? If so what is the TWRP password?
Click to expand...
Click to collapse
looks like you have enabled data encryption in the OS...
in twrp wipe everything and format data
then push the rom again and install it.

alray said:
looks like you have enabled data encryption in the OS...
in twrp wipe everything and format data
then push the rom again and install it.
Click to expand...
Click to collapse
And that worked! Thank you so much!!