Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
saeed_sofi said:
can this rom be installed on gt-s5570i?
Click to expand...
Click to collapse
hello is there made any kitkat firmware for galaxy mini without any bugs I mean is there any firmware for daily use?
Any way to back to stock rom by CMW?
Or another solution? I have problem with video codecs, every video player crash.
my android version 4.1.1. how to update into 4.4.4? i have been try to update trough recovery mode, install zip from sdcard, but its failed. i can't update cwm too,,, helpme please,,,,
Few CM 11 questions
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
aleskva said:
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
Click to expand...
Click to collapse
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Answers:
1. The op(member of androidarmv6 group) isn't active. Thats why the thread says alpha. But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
2. Cm11 is stable enough for daily usage. But cm11 is resource hungry. I would recommend you to try cm11 and make your own decision about it. Every android version <= 4.2.2 are fully stable and everything works. I use aokp 4.1.2 myself. 4.2.2 is a bit heavy but if you don't use too many apps, you could use it without any problems. Cm9, ics aosp, cm10,slimbean,aokp jb4.1.2 roms are most efficient 4.x roms and less resource hungry. For better results and good performance, you may need to install greenify. See my threads for 4.x roms.
3. Cm12 isn't booting yet. You can follow review.androidarmv6.org for latest changes and progress. Better use aokp 4.1.2 or slimbean or cm10 with greenify and int2ext(to expand internal memory, you need to create 512mb ext4 partition on sdcard).
4. It is not that hard to flash a simple zip. There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial. Then flash cwm 5.0.2.8 recovery(search in and download from galaxy mini section) it from stock rom recovery.
Then you are ready to install any galaxy mini roms.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful. Have a happy flashing.
Sent from my GT-S5570 using XDA Free mobile app
Thank you! And one more question below
Venkatesh said:
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful.
Click to expand...
Click to collapse
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Venkatesh said:
But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
Click to expand...
Click to collapse
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
Venkatesh said:
I would recommend you to try cm11 and make your own decision about it.
Click to expand...
Click to collapse
I'll try and I'll see
Venkatesh said:
There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial.
Click to expand...
Click to collapse
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Venkatesh said:
Have a happy flashing.
Click to expand...
Click to collapse
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
aleskva said:
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
I'll try and I'll see
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
Click to expand...
Click to collapse
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, I'll try next week and we'll see
well done
My experiences and impressions
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
aleskva said:
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
Click to expand...
Click to collapse
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Venkatesh said:
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Click to expand...
Click to collapse
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
aleskva said:
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
Click to expand...
Click to collapse
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Venkatesh said:
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Click to expand...
Click to collapse
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
aleskva said:
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
Click to expand...
Click to collapse
try cm10.1 rom from here.
Venkatesh said:
try cm10.1 rom from here.
Click to expand...
Click to collapse
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
aleskva said:
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
Click to expand...
Click to collapse
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Venkatesh said:
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Click to expand...
Click to collapse
I had formatted sd-ext, because it is written in int2ext installation steps. Finally I tried your suggestion and everything works. I just flashed gapps right after flashing OS, because I want Google's first boot guide. I'm so happy everything works like a charm on that older, but good Mini. I'm also happy I got rid of that buggy GB. Once more thanks.
Err
Official CM Nightlies
http://download.cyanogenmod.org/?device=targa&type=nightly
Official CM Snapshots
http://download.cyanogenmod.org/?device=targa&type=snapshot
Safestrap 3.75 (or newer)
http://forum.xda-developers.com/droid-bionic/general/how-to-installing-using-safestrap-3-75-t3184429
Open GApps ARM | 6 | Mini (or smaller)
http://opengapps.org/
Stargo's CM13 builds (old and unofficial)
http://droid.cs.fau.de/cm-13.0/test/
~
These links may no longer work over time, for various reasons.
If you have a new link Please just post it in this thread .
I got the first snapshot a while back and like it. Did the upgrade to the latest snapshot 2 earlier today.
Is there a place to see the changes between snapshots on targa or in general? Thanks
nthnu said:
I got the first snapshot a while back and like it. Did the upgrade to the latest snapshot 2 earlier today.
Is there a place to see the changes between snapshots on targa or in general? Thanks
Click to expand...
Click to collapse
https://www.cmxlog.com/13/
CDMA EVDO Rev.B
How to disable 1xRTT ? I want EVDO only
I will say that this Droid Bionic I bought from a friend for 20 to use as a music player and cam has been thd the most challenging root and customization I've ever done. I began by try
Ing to do the entire root and CM 12 without a pc. I almost made it to, but it soft bricked right At the end. (flash failure) Took me a week and many hrs of research. to get it all fixed and put CM 13 on it. It wassooo slow, Iwent back to a stock roofed, debloated rom that's impressively fast for a dual core (I don't have cel service, but could with it.
I I still get the flash failure fastboot screen every time I boot it. Have touse a key comboto boot, then it goes fine I wouod almost keep it for music, but I cant get t to respond to earbud buttons. That means this formerly awesome phone will probably get tossed in 'challenge complete no longer interested "box in the basement with the rest.
Backups with Safestrap / TWRP
Can't seem to do TWRP backups anymore in recovery with Safestrap 3.75 /TWRP anymore with Android 6.x Is there a new method with these?
hapoll said:
Can't seem to do TWRP backups anymore in recovery with Safestrap 3.75 /TWRP anymore with Android 6.x Is there a new method with these?
Click to expand...
Click to collapse
Are you actually running CM13 on one of these? As indicated previously, I found it so intolerably slow I went back to my stock modded. I could switch back to test this if you're still interested.
In the last few weeks, I've come to like this relic. I'm still using it. (oh, the fact that I lost my tab a and am post Xmas broke might have a bit to do w it
last build
Last build
cm-13.0-20161219-NIGHTLY-targa.zip
Question
ze7zez said:
Last build
cm-13.0-20161219-NIGHTLY-targa.zip
Click to expand...
Click to collapse
i've been going through the forums, and im still asking myself if i can change my device to "targa" i don't even know what that is......
i have:
XT875
build: 9.8.20-72_VZW ZZ
it doesn't say targa anywhere in the specs, however i saw a thread with all of the same specs as mine, and it had a targa file.... thanks
prosp3ct said:
i've been going through the forums, and im still asking myself if i can change my device to "targa" i don't even know what that is......
i have:
XT875
build: 9.8.20-72_VZW ZZ
it doesn't say targa anywhere in the specs, however i saw a thread with all of the same specs as mine, and it had a targa file.... thanks
Click to expand...
Click to collapse
I am attempting the same with my XT907. I cant get any of the custom ROMs to flash. I have bricked this phone multiple times and now waiting for the battery to charge agasin to attemot to flash the stock ROM back which is 4.1.2 I think. If you find a CM 13 that will work lwt mw know. I am using RSD Lite to flash with also.