Database Develop

[Q] need help about knzo kernel and huexxx

if im use huexx kernelhttp://forum.xda-developers.com/showthread.php?t=1332311
its include knzo patched libsqlite?or i must instal that(again)???which performance governor smatass v2 or minmax(huexx v3 kernel)I/O bfq or deadline??sorry for may bad english

If you had readed the first post of my thread, you could read that since V2 I've included the patched libsqlite.so.
Regards.
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
And, to say that yo don't HAVE TO patch anything, it's not mandatory, it will give you some advantages in SQL transactions, but without this patch your phone will work flawlessly.
I'll give a file to restore original libsqlite because to patch it can loss data in case of a suddenly lack of power or reboot of the phone.
Regards.

Huexxx said:
If you had readed the first post of my thread, you could read that since V2 I've included the patched libsqlite.so.
Regards.
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
And, to say that yo don't HAVE TO patch anything, it's not mandatory, it will give you some advantages in SQL transactions, but without this patch your phone will work flawlessly.
I'll give a file to restore original libsqlite because to patch it can loss data in case of a suddenly lack of power or reboot of the phone.
Regards.
Click to expand...
Click to collapse
thanks sir...rrrrrr,cm7 support overclock??

Not yet...

[ROM][4.0.4][CM9] CMLight by MoNTE48

CMLight 4.0.4​
Android 4.0.4, based on CM9!​ Based on the works kasper_h (Mackay ROM), CyanogenMod Team, Slim Tean, Remics Team, Stratosk, etc. ​
=> RAM: 373 MB;
=> Acceleration up to 1200 MHz;
=> Size: ~72 MB;
* Plenty of free RAM;
* Good playability (ROM for Gamers!);
* I'm a speed of your phone you did not expect!
Code:
I did it for myself and users 4PDA, but I want to share with you. I have long had a desire to do something like this, @ kasper_h podtolkunl me to do and I did it!
Download​All build: https://www.dropbox.com/sh/a2bwrpwckwlzu3y/Lyb0jK6JeX
Click to expand...
Click to collapse
GApps​New Market and Null. Realy:laugh:
02/2014:https://www.dropbox.com/sh/o8rzwcbdyfutwqm/kT9Omi8vat [7MB]
Click to expand...
Click to collapse
Thank You and Bye!
Your's MoNTE48.​

Reserve:laugh:...

port or fully compiled？:good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:23 PM ----------
You can upload some screenshots?
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
based galaxysmtd_2014_1.4 or 2014.1.3?

waihung0626 said:
port or fully compiled？:good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:23 PM ----------
You can upload some screenshots?
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
based galaxysmtd_2014_1.4 or 2014.1.3?
Click to expand...
Click to collapse
And port, and rebuild, and compiled.
Screenshots... Wait one day.
Based on ver. 1.3. 1.3/1.4, small modify.

Beware of ics it is prone to the eu bug. I am not saying anything about this ROM just ics in general.
SlimKat Mako

Don't get me wrong, but I don't see the point of creating a new thread for an ICS rom...

flapane said:
Don't get me wrong, but I don't see the point of creating a new thread for an ICS rom...
Click to expand...
Click to collapse
All the old threads are outdated (here is an updated version of the programme), on many threads can download links are not working. And let's face it: two weeks ago I was sitting on 4.2/4.3/4.4, and did not know what Real Racing 3, Asphalt 7, Iron Man 3, NFS work on Vibrant so good! I play for hours, the phone is not hung never!

jrongi1 said:
Beware of ics it is prone to the eu bug. I am not saying anything about this ROM just ics in general.
SlimKat Mako
Click to expand...
Click to collapse
Isn CyanogenMod not solved this problem? I had the EU on some ICS. Normally on the first day. This ROM I use more than 2 weeks, all is fine!

how to rebuild, and compiled what！thank you,I want to learn！

[LINARO] [AOSP] [4.4] Aki.Kernel|version 2.3| ABANDONED

Aki.kernel is a kernel created by me to further enchance Grand's performance on AOSP based ROMs like CM11, AOSPA, PAC, etc.
It places emphasis on increasing performance through frandom module, SIO Scheduler and smartassv2 governor.
Ain't nobody got time for that.
Features
- Frandom support.
- ULTRA KSM
- zRAM
- Dynamic FSync
- XZ Compression
- F2FS support
- Smartassv2, Pegasusq and Adaptive governor.
- SIO Plus,VR and ROW Scheduler.
- Compiled with Linaro 4.7.4 toolchain.
-O3 Optimisation flags used. (from ver. 1.1)
- OC upto 1.5 Ghz
XDA:DevDB Information
Aki.Kernel AOSP (4.4) , Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
akiratoriyama, androidbaba
Kernel Special Features: I love testing and creating stuff for myself and my fellow members. Here's a kernel for all ya flasoholics.
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2014-05-31
Created 2014-04-18
Last Updated 2014-06-22

Reserved
Downloads
Every version of my kernel is available on AndroidFileHost
http://www.androidfilehost.com/?w=files&flid=13908
Performance control (credits @h0rn3t)
http://forum.xda-developers.com/devdb/project/?id=600#downloads
Source
https://github.com/akiratoriyama/android_kernel_samsung_i9082/
Don't expect too much.

Reserved
Changelog
Version 2.3
- Added SmartassH3 governor.
- Merged some changes from @pawitp's sources.
Version 2.2.1
- Compiled with Linaro 4.7.4
- XZ compression for small Kernel file and better performance
- Increase Max READAHEAD for better performance.
- staging: Add Snappy compression library (v3).
- Network speed increased.
- Sched Tweaks to improve performance.
Version 2.2
- Substantial performance and battery optimizations.
- Now compiled with GCC 4.6 instead of Linaro.
Version 2.1
- Dynamic FSync
Version 2.0.1
- F2FS support added.
- Fixed deletion of modules
Version 1.6
- Added SIO Plus scheduler
- Disabled Pegasusq governor for the the time being.
- Removed scsi_wait_scan.ko module
- Add RCU Boost
- Increased Entropy
Version 1.5.1
- Reduced WiFi wakelocks.
- Added Pegasusq governor.
- Added Performance Control app.
Version 1.5
- Added Ultra KSM.
Version 1.4
- Added VR and ROW scheduler.
Version 1.3
- Reverted O3 optimisations for a stable kernel.
- Added zRAM with a swapiness of 60.
- Now based on AnyKernelUpdater by Koush and modified by @CoolDevelopment.
Version 1.2
- Added adaptive governor.
- Cleaned some code and improved stability.
Version 1.1a
- Fixed FCs.
Version 1.1
- Added O3 Optimizations .
- Removed Underclocking.
Version 1.0.2
-Added Experimental Underclocking.
Version 1.0.1
- Added Experimental Overclocking.
Version 1.0
- Based on CM Defconfig.
Below Version 1.0
- Created for personal testing only
CREDITS
YOU for testing and using this kernel.
@k2wl For helping me and guiding me.
@pawitp For his kernel source.
@xenon92 For responding to a query and also used much of his Nebula Kernel code.
@TripRex For much assistance and used some of his Project Kernel code too.
@sweetnsour My primary inspiration for building a kernel
@androidbaba For extensively testing the early builds of Aki.Kernel.
@Ryuinferno for Frandom module.
@Christopher83 For his Kernel commits and also his Linaro toolchain.
@CoolDevelopment For his ver. of AnyKernelUpdater and also used some of his commits from MoshKernel.
@coldsorrow For Ultra KSM.
@h0rn3t For his Ultra-awesome Performance Control app.
@boype For his commits from Fancy Kernel.
@faux123 For Dynamic FSync.
Galaxy Grand Testers Group
Galaxy Grand Developers Group

link asking for login???
support dual sim??
made an acc thn the link specified acces denied

Download Link is asking for login.....

Log in
when
downloading

@tazo08 @supersaayuj and @mukeshpacheria
Links fixed.

akiratoriyama said:
@tazo08 and @supersayuj
Links fixed.
Dual
Click to expand...
Click to collapse
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!

Grrt wrk buddyyy...will test and report:good:

supersaayuj said:
Download Link is asking for login.....
Click to expand...
Click to collapse
supersaayuj said:
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!
Click to expand...
Click to collapse
Using ART ?

help plzz

supersaayuj said:
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!
Click to expand...
Click to collapse
Which version you are trying??
Sent from my GT-I9082 using XDA Premium 4 mobile app

androidbaba said:
Which version you are trying??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1.1
---------- Post added at 11:23 AM ---------- Previous post was at 11:21 AM ----------
akiratoriyama said:
Using ART ?
Click to expand...
Click to collapse
NO

@supersaayuj
Use ver 1.0

akiratoriyama said:
@supersaayuj
Uploading 1.1a Hotfix version.
Click to expand...
Click to collapse
Force close is only at starting...after that it is working smooth.(till now)
Will update with further testing:good:

Anyone who is using facing FCs please use ver 1.0.1.

RIPPER said:
Force close is only at starting...after that it is working smooth.(till now)
Will update with further testing:good:
Click to expand...
Click to collapse
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
Click to expand...
Click to collapse
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?

supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?
Click to expand...
Click to collapse
Use smartassv2/interactive with 800-1200 for medium performance.

supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?
Click to expand...
Click to collapse
Don't Spam..everything is working for me:good:

RIPPER said:
Don't Spam..everything is working for me:good:
Click to expand...
Click to collapse
LOOOL... i was not spamming...i know everything works for u...but not for me..so asked a little help

[KERNEL][5.x]elementaryKernel v1.1

This is supposed to be a clean Lollipop kernel without hybrid updates. Most of the modifications will consist of added features like DT2W, SoundControl etc.
Features:
DoubleTap2Wake v2
Pocket Guard
SoundControl
LCD Kcal Control
FastCharge
Powersuspend v1.6
Intelliplug
Intellithermal v2
ARMv7 optimizations
Asynchronous Fsync
FIOPS I/O Scheduler
Interactive governor finetuned
Faux's Simple GPU Algorithm
GPU Overclock to 533 MHz
Notes:
This kernel is not for those who want a lot of customization settings. The kernel is already finetuned enough to work out of the box.
Everything is done this way because I compiled this kernel only for personal use. I decided to publish it because all the other kernels are using the old DT2W module and are having problems.
I'm not willing to add other governors, schedulers or features that I don't think will make a significant difference.
DoubleTap2Wake and Pocket Guard enabled by default
Pocket Guard turns off the touchscreen and the power button when the proximity sensor is covered to avoid accidental unlocks when the phone is inside the pocket and cuts off the power for the touchscreen after the proximity is covered for at least 5 seconds to avoid turning the touchscreen on and off continuously.
DT2W is optimized for low power usage
SoundControl has modified Quality preset already applied for those who can't afford Faux's app
FastCharge is not a module that can be turned on and off. It is a line of code inside the USB driver that sets the charging voltage to 1500mA on every compatible charger
MPDecision is disabled by default and replaced by Intelliplug
The kernel is using CM12 ramdisk. If you encounter incompatibility problems with other ROMs, you will have to unpack and repack the ramdisk by yourself.
Changelog:
1.1
Force SELinux Permissive mode for Xposed compatibility
Add GPU Overclock to 533 MHz
Add Faux's Simple GPU Algorithm
Downloads:
elementaryKernel 1.1 02/19
XDA:DevDB Information
elementaryKernel, Kernel for the Moto G
Contributors
alin.p
Source Code: https://github.com/alin23/android_kernel_motorola_msm8226
Kernel Special Features: DoubleTap2Wake, Pocket Guard
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2015-02-18
Last Updated 2015-02-19

Thanks to share your work I'll test your kernel today later...
---------- Post added at 05:23 PM ---------- Previous post was at 04:58 PM ----------
I just try to flash it but no way I have an error under cmw ....

Re-upload the zip
File manager showing file is corrupted. I tried 2-3 times but still same error

abhi0502 said:
Re-upload the zip
File manager showing file is corrupted. I tried 2-3 times but still same error
Click to expand...
Click to collapse
+1
Sent from my Moto G using XDA Free mobile app

hello,
the .zip file is corrupt, Re-upload the file thank you

I so wanna try this, ill flash cm12 just because of it

Is it compatible with stock 5.02 asia

Glad to see you here Alin. (A former Galaxy Mini owner.)
And yeah, the zip seems to be corrupted.

File corrupted also by me please could you re upload ....

abhi0502 said:
Re-upload the zip
File manager showing file is corrupted. I tried 2-3 times but still same error
Click to expand...
Click to collapse
+1
Sent from my Moto G using XDA Free mobile app[/QUOTE]

Can we not clutter the thread wit the same post?

Fixed upload
Sorry for the delay. I fixed the upload. I don't know what happened.
By the way, I didn't test but I don't think it is compatible with stock lollipop. I tested it on CM12, SlimLP and AOSPA and it works.

Works on stock ROM 5.0.2 on a XT1032?

Thanks this time I could flash it hope battery drain will be ok ...I'll report later

Wroking fine
please only add GPU overclock to 550mhz

Does it works on stock 5.0.2 brazilian ?

ATTENTION TO EVERYONE!!!!
NO, this kernel DOES NOT WORK ON ANY STOCK OR STOCK BASED ROM! IT is impossible because a kernel for stock rom needs to be compiled from motorola's kernel source, and motorola didnt release any source for lollipop yet! Please stop asking if this kernel works on stock because it doesnt and don't even try to flash it because you're only gonna end up with a boot loop! THANK YOU!
---------- Post added at 11:59 PM ---------- Previous post was at 11:55 PM ----------
I have a question @alin.p, would it be possible if you add a setting to completely disable the power button except for rebooting? Im asking this because i wanna force myself to use s2w and s2s but i always just use the power button. I'm just asking if that would be possible, not telling you to add it

DeHuMaNiZeD said:
ATTENTION TO EVERYONE!!!!
NO, this kernel DOES NOT WORK ON ANY STOCK OR STOCK BASED ROM! IT is impossible because a kernel for stock rom needs to be compiled from motorola's kernel source, and motorola didnt release any source for lollipop yet! Please stop asking if this kernel works on stock because it doesnt and don't even try to flash it because you're only gonna end up with a boot loop! THANK YOU!
---------- Post added at 11:59 PM ---------- Previous post was at 11:55 PM ----------
I have a question @alin.p, would it be possible if you add a setting to completely disable the power button except for rebooting? Im asking this because i wanna force myself to use s2w and s2s but i always just use the power button. I'm just asking if that would be possible, not telling you to add it
Click to expand...
Click to collapse
Thanks
---------- Post added at 02:57 AM ---------- Previous post was at 02:41 AM ----------
great works

Mukesh099 said:
Is it compatible with stock 5.02 asia
Click to expand...
Click to collapse
No its only for CM12 based Roms

Thank you for releasing this, was missing my DT2W.

[Kernel] NN-Kernel-LP-T710/810-5.1.1

I don't consider myself a dev, but I think I'm a pretty good hack. So may I present to you.....
NN-Kernel​
This will work on the T710 and T810, Wifi only models. I built this for my BNN Nook, and I haven't really come up with a name for the kernel yet. NN so far, stands for "No Name" Or "Neked Nook" which is the Rom that I might be releasing shortly.
You flash this at your own risk. There's the discaimer. :silly: ​V1.3 and up - I AM NOT RESPONSIBLE IF YOU BURN UP YOUR TABLET! BE CAREFUL OF THE OVERCLOCKS AND KEEP THEM REASONABLE.
Install instructions:
You MUST HAVE ROOT and TWRP installed to flash this!!
It's built on Lollipop 5.1.1 - I have no idea what will happen if you flash this on anything else!!
Flash kernel then wipe cache and dalvic
Reboot and profit!!
What it has: (changelog)
V1.4
Synapse support - finally
Can UV now
Raised CPU voltages for higher CPU clocks
V1.3.1
I missed a line on interactive gov. Just the fix for it.
V1.3 - YOU FLASH THIS AT YOUR OWN RISK!!! It may melt your face off!!! You have been warned!
OC Big/Little cores to 2.2ghz and 1.6ghz. These can still go higher if I let them
Added GPU step of 650. Can go higher if I can get an interface. For safety purposes
UC CPU's to 600 and 300mhz
V1.2
a lot of under the hood stuff
Removed fiops sheduler - had conflicts
OC Big/Little cores 2.1ghz and 1.5ghz
V1.1 - all of V1 plus -
New toolchain - Ubertc 4.9
FIOPS shceduler
V1
OH7 source
Selinux Permissive
Init.d support
Knox removed from ramdisk- Thanks BigBot96 for that tip
Enabled OTG - Untested
Multicore support enabled
Updated Frandom
Govs enabled- Powersave, Conservative, Ondemand - removed Userspace
Some optimizations
You'll need to use a Kernel tuner for the OC's and UV's. Use "Synapse" from the Playstore.
This is a Tablet, so I won't be adding things like I would for a phone.
_______________________________
Downloads: - V1.3 and higher - Read The OP/Changelog Warnings. Keep your clocks reasonable
NN-Kernel-V1.4-710
NN-Kernel-V1.4-810
NN-Kernel-V1.3.1-710
NN-Kernel-V1.3.1-810
NN-Kernel_V1.3-710
NN-Kernel-V1.3-810
__________________________
NN-Kernel-V1.2-710
NN-Kernel_V1.2-810
NN-Kernel-V1.1-710
NN-Kernel-V1.1-810
NN-Kernel-V1 -710
Thanks to:
ashyx
BigBot96
UpInTheAir
djmax81
And other peoples gits I can't remember
XDA:DevDB Information
NN-Kernel-LP-T710, Kernel for the Samsung Galaxy Tab S2
Contributors
engine95
Source Code: https://github.com/engine95/s2-gts28wifi-exynos5433.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-02-06
Created 2016-02-06
Last Updated 2016-02-06

Reserved

Will this work for 810?

android4life92 said:
Will this work for 810?
Click to expand...
Click to collapse
I would think it should. But I don't know for sure. 710 and 810 share roms with just a build.prop adjustment from what I can tell. If you're brave, make a backup and flash it. Let me know if it works.

I know that this kernel is for the 710 but installed on my 810 and when booted the screen became unresponsive, flickering all the time. At second boot didn't pass from the Samsung logo. I had to restore from a backup.
Sent from my SM-T810 using Tapatalk

Its work on my 710!! ?

danyvw said:
I know that this kernel is for the 710 but installed on my 810 and when booted the screen became unresponsive, flickering all the time. At second boot didn't pass from the Samsung logo. I had to restore from a backup.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
Thanks for trying it though. When I get the 710 a little further, I'll probably do an 810 then since they're similar.

engine95 said:
Thanks for trying it though. When I get the 710 a little further, I'll probably do an 810 then since they're similar.
Click to expand...
Click to collapse
Thank you for your work!!

NN Kernel
Installed and working well. No issues so far.

If anyone can test OTG, I'd appreciate it very much.
I have an T815Y permissive kernel in testing right now - If anyone can get me the stock boot.img for OG5.
Edit:
NN-Kernel for the 810 - https://www.androidfilehost.com/?fid=24407100847294095 @danyvw since you attempted already. Also @Nom Prophet
Bonus, you get V1.1 which is new toolchain and FIOPS scheduler.

engine95 said:
If anyone can test OTG, I'd appreciate it very much.
I have an T815 permissive kernel in testing right now - If anyone can get me the stock boot.img for 5.1.1. OG5 or OK5 may be needed.
And for the brave souls who care to test. WARNING!!! NOT TESTED YET!!!!
NEEDS TESTING!!! NN-Kernel for the 810 - https://www.androidfilehost.com/?fid=24407100847294095 NEEDS TESTING!!!!! @danyvw since you attempted already.
This should flash just fine, but as it hasn't been tested yet. Bonus, you get V1.1 which is new toolchain and FIOPS scheduler.
Click to expand...
Click to collapse
Flashed the kernel. Lost root but flashed Supersu 2.66 beta thru recovery, this time everything seems to work flawlessly. Will continue reporting as time passes. Thanks!
Sent from my SM-T810 using Tapatalk

I don't see any issues with the T810 kernel. Ran back to back Antutu benches before and after flashing and I got 67000 compared to the previous 63000 (if that proves anything). I'm running OptimalROM and didn't lose root after flashing. Will report back if I find any bugs.
Thanks Engine!

Finally something to flash lol

Is Netflix working for you after flashing this kernel?

IngoPan said:
Is Netflix working for you after flashing this kernel?
Click to expand...
Click to collapse
Mine is working with liboencrypto.so renamed, also I don't get HD but that is not related to this kernel, with stock kernel (rooted) had the same problem.
Sent from my SM-T810 using Tapatalk

please give me a few more details. what do i have to rename in what Folder please? is there
any1 else who got hd working?
Gesendet von meinem SM-N9005 mit Tapatalk

IngoPan said:
please give me a few more details. what do i have to rename in what Folder please? is there
any1 else who got hd working?
Gesendet von meinem SM-N9005 mit Tapatalk
Click to expand...
Click to collapse
Go to /system/lib and find liboencrypto.so and rename it to liboencrypto.so.back then reboot.
Sent from my SM-T810 using Tapatalk

just find liboemcrypto.so is it that?
Gesendet von meinem SM-N9005 mit Tapatalk

IngoPan said:
just find liboemcrypto.so is it that?
Gesendet von meinem SM-N9005 mit Tapatalk
Click to expand...
Click to collapse
Yes. Rename it to liboencrypto.so.back and reboot. Now Netflix should work.
Sent from my SM-T810 using Tapatalk

i just can find emcrypro, with an 'm' not an 'e'
Gesendet von meinem SM-N9005 mit Tapatalk
---------- Post added at 04:46 PM ---------- Previous post was at 04:09 PM ----------
Done and works Where do i now see from if its HD enabled or not?
---------- Post added at 04:56 PM ---------- Previous post was at 04:46 PM ----------
---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ----------
Where do i find 1.1 please for 810? I just can find v1.Thanks.
---------- Post added at 04:58 PM ---------- Previous post was at 04:57 PM ----------
Where do i find 1.1 please for 810? I just can find v1. Thanks.