Newbee Here..
Just flashed I9000XXJVS and rooted it.
My hardways keys especially the back button soft key is suffering from ghost touch disease ( Clicks itself automatically anytime and there is no end to the solution )
Therefore i installed SlimBean for the Navigation Bar Soft keys... Even the alternate keys are working perfectly fine the problem arises with the network problem.
If I flash Slimbean rom then the network is completely out of range and i'm unable to get any sort of signals as well.
So i was looking for a MOD where i can install the similar navigation bar on a rooted stock rom to eliminate the need of my hardware soft keys.
day 2 and not even a single reply
this ain't completely done... right..?
allasdhi said:
this ain't completely done... right..?
Click to expand...
Click to collapse
Problem could be due to your firmware, not sure what region ( your country) is, but i9000's latest ROM's are XWJW6 & 9, so go here and update your stock ROM to the latest meant for your region ( scroll along region code to identify your country) Most likely your boot-loader needs updating since you are using XX series
Once you know what is the baseband version for your country on Gingerbread, you can flash that version of ICS modems (look here) when testing slim bean ROM's
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
India Firmware also tried
xsenman said:
Problem could be due to your firmware, not sure what region ( your country) is, but i9000's latest ROM's are XWJW6 & 9, so go here and update your stock ROM to the latest meant for your region ( scroll along region code to identify your country) Most likely your boot-loader needs updating since you are using XX series
Once you know what is the baseband version for your country on Gingerbread, you can flash that version of ICS modems (look here) when testing slim bean ROM's
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
Click to expand...
Click to collapse
I tried the Indian firmware version as well.. But the problem still persists
allasdhi said:
I tried the Indian firmware version as well.. But the problem still persists
Click to expand...
Click to collapse
Follow this guide to do a clean JVU gingerbread ROM installation than get the correct modem ( Indian?) and flash over it for best reception.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
Related
Hi Everyone,
I currently have the infinitum rom v 2.2
With devil kernel and i am trying to install cm rom 10.2 and every time i am trying to install it threw the recovery and it says installation aborted.
What should i do?
There is the info of my device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you very much for you help.
And have a great day
jenia44 said:
I currently have the infinitum rom v 2.2
With devil kernel and i am trying to install cm rom 10.2 and every time i am trying to install it threw the recovery and it says installation aborted.
What should i do?
Click to expand...
Click to collapse
Your image link, does not work so not sure what is your error. Installation will get aborted cause your ROM could be on 2.2, you should be on 2.3.6, second you may have wrong CWM, or wrong ROM files etc.
Look here about
26) Problem:- ClockWorkMod Recovery Giving Status 0 errors
27) Problem:- ClockWorkMod Recovery giving Status 7 error
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
xsenman said:
Your image link, does not work so not sure what is your error. Installation will get aborted cause your ROM could be on 2.2, you should be on 2.3.6, second you may have wrong CWM, or wrong ROM files etc.
Look here about
26) Problem:- ClockWorkMod Recovery Giving Status 0 errors
27) Problem:- ClockWorkMod Recovery giving Status 7 error
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Click to expand...
Click to collapse
Thank you very much.
Can i get the zip with the google apps because the one that i have is not working it says the wizard has failed.
jenia44 said:
Thank you very much.
Can i get the zip with the google apps because the one that i have is not working it says the wizard has failed.
Click to expand...
Click to collapse
download from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hi, I have a SGS with Android 2.3.6 XWJW9 from TMN (Portugal).
I don't know how to root my phone.
I've tried z4root, unlockpro...
Is it possible use this CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.rar with JW9? The site where I found this only talks in JW4 and JW6.
(h**p://pplware.sapo.pt/truques-dicas/android-sgs-como-fazer-root-a-rom-oficial/)
Thanks
joao1996f said:
Hi, I have a SGS with Android 2.3.6 XWJW9 from TMN (Portugal).
I don't know how to root my phone.
I've tried z4root, unlockpro...
Is it possible use this CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.rar with JW9? The site where I found this only talks in JW4 and JW6.
(h**p://pplware.sapo.pt/truques-dicas/android-sgs-como-fazer-root-a-rom-oficial/)
Thanks
Click to expand...
Click to collapse
if you only want ROOT and nothing else use framaroot app for instant root..if you want root and CWM , flash the CF root use JW 6
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
joao1996f said:
Is it possible use this CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.rar with JW9? The site where I found this only talks in JW4 and JW6.Thanks
Click to expand...
Click to collapse
Yes, I made it by my own
some problems
I used framaroot 1.6 but failed.
Then i tried 1.5.3 and it worked but i have problems updating superuser binary.
I also have problems with "Galaxy S Unlock" app and with "Generate Unlock Windows" (i receive a message saying permission denied).
With the apps that requiere superuser i never receive the message to give permission.
i
DumF0rGaming said:
Yes, I made it by my own
Click to expand...
Click to collapse
the fm radio works? is it possible unlock sgs with "Galaxy S Unlock"?
i have nv_data.bin on my computer but i can't have unlock code with SamsungUnlocker (GPU problems).
Sorry, I don't ever get these issues
DumF0rGaming said:
Sorry, I don't ever get these issues
Click to expand...
Click to collapse
the issues i talk are from framaroot.
I was ask you if all the functions of the phone are woking well when you did this and if it's possible unlock with "Galaxy S Unlock".
The problem is - I don't need to unlock my phone
joao1996f said:
I used framaroot 1.6 but failed.
Then i tried 1.5.3 and it worked but i have problems updating superuser binary.
I also have problems with "Galaxy S Unlock" app and with "Generate Unlock Windows" (i receive a message saying permission denied).
With the apps that requiere superuser i never receive the message to give permission.
Click to expand...
Click to collapse
If framaroot failed, even when you try different rooting methods, in it, And you may need to install busybox too. just flash the kernel with Root and CWM to resolve.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hi guys. How can I install the stock firmware on my Samsung Galaxy S I9000? I can't do it with Odin, because my laptop can not recognize the USB. So, i need to install from external SDCard.
Can you give me some links with the firmware and a little help, tutorial how to do it from SDCard?
Talposialexandru said:
Hi guys. How can I install the stock firmware on my Samsung Galaxy S I9000? I can't do it with Odin, because my laptop can not recognize the USB. So, i need to install from external SDCard.
Can you give me some links with the firmware and a little help, tutorial how to do it from SDCard?
Click to expand...
Click to collapse
use this guide to resolve connection problems , you can try Mobile Odin to flash ROM's from SD cards . Basic guide was written by me for M110S , so just use i9000 ROMS here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
The problem is that my phone is blocking at S sign. All i can do is just to enter in Download Mode or in the BIOS ( home + power on + volume up )
So i need just a file to put on SDCard, then from BIOS just install it Is it possible?
Talposialexandru said:
The problem is that my phone is blocking at S sign. All i can do is just to enter in Download Mode or in the BIOS ( home + power on + volume up )
So i need just a file to put on SDCard, then from BIOS just install it Is it possible?
Click to expand...
Click to collapse
Best you solve USB problem with guide given earlier, since you only have download mode. you have to use Odin3, or take it to technician to use JTAG
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
So, all i have to do is just to JTAG it. My laptop shows me the message " USB device does not recognized " so, in Odin3 my phone is not recognized. Thanks man and sorry for my bad english.
Talposialexandru said:
So, all i have to do is just to JTAG it. My laptop shows me the message " USB device does not recognized " so, in Odin3 my phone is not recognized. Thanks man and sorry for my bad english.
Click to expand...
Click to collapse
that problem can be easily resolved by following this guide http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
I received my phone like this after passing it to a friend.
mdyusuf said:
I received my phone like this after passing it to a friend.
Click to expand...
Click to collapse
simply means you need to flash it with a kernel or a ROM, depending on what your friend did to it. As is, it will connect to Odin 3, I cannot advise you further as you have not indicated what Model it is, what ROM you used before etc.
Flashing wrong ROM'S and kernels can lead to this, so make sure you get the correct firmware for flashing it.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
THANK YOU..
Thank you so much..all night i was looking on the net for another phone. You practically saved me hundreds of ringgit malaysia. I know i was pretty bad at introduction, anyway thanks a lot.. My samsung is a Galaxy S i9000, and at the moment i'm still searching for a suitable rom for my phone as i use CyanogenMod 10.2 and the home, menu and back button and also the line is not functioning yet. I'll take my time to search for the rom.. I can't thank you enough for helping me out even the difference in place and time. Thank you xda-developers, it's a place i think all of us can rely on. THANK YOU SO MUCH..and sorry for the long thank you haha..
xsenman said:
simply means you need to flash it with a kernel or a ROM, depending on what your friend did to it. As is, it will connect to Odin 3, I cannot advise you further as you have not indicated what Model it is, what ROM you used before etc.
Flashing wrong ROM'S and kernels can lead to this, so make sure you get the correct firmware for flashing it.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Click to expand...
Click to collapse
mdyusuf said:
Thank you so much..all night i was looking on the net for another phone. You practically saved me hundreds of ringgit malaysia. I know i was pretty bad at introduction, anyway thanks a lot.. My samsung is a Galaxy S i9000, and at the moment i'm still searching for a suitable rom for my phone as i use CyanogenMod 10.2 and the home, menu and back button and also the line is not functioning yet. I'll take my time to search for the rom.. I can't thank you enough for helping me out even the difference in place and time. Thank you xda-developers, it's a place i think all of us can rely on. THANK YOU SO MUCH..and sorry for the long thank you haha..
Click to expand...
Click to collapse
you only need to follow this or click my links below to get any ROM you want for i9000 from My Androids collections (link below)
If your home button is not working you better read this too
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hi guys,first of all, i'm nooby when it comes to rooting, and most of the threads i found doesn't give a satisfying answer.
So,i have galaxy s gt-i9000, running on GB 2.3.6,Kernel version is JW6,and version number is also JW6,the problem is, i can't find jw6 root files, all i find is JV4 or JVU...etc,so could anyone please provide me a way and suitable root files?...i really need the root to install language fonts :/
if you need extra infos about my phone feel free to ask.
EDIT : ROOTED using JW4 cf-root. thanks for the help! do you have any suggested apps for rooted devices?
mrghost99 said:
Hi guys,first of all, i'm nooby when it comes to rooting, and most of the threads i found doesn't give a satisfying answer.
So,i have galaxy s gt-i9000, running on GB 2.3.6,Kernel version is JW6,and version number is also JW6,the problem is, i can't find jw6 root files, all i find is JV4 or JVU...etc,so could anyone please provide me a way and suitable root files?...i really need the root to install language fonts :/
if you need extra infos about my phone feel free to ask.
Click to expand...
Click to collapse
you can use CF Root JW4, for JW6 & JW9 also, or you can follow this and just install framaroot app on 2.3.6, for instant root or semaphore GB kernel.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
xsenman said:
you can use CF Root JW4, for JW6 & JW9 also, or you can follow this and just install framaroot app on 2.3.6, for instant root or semaphore GB kernel.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
Click to expand...
Click to collapse
With framaroot can I install jb/ics rom?
peppecampisi said:
With framaroot can I install jb/ics rom?
Click to expand...
Click to collapse
frmaroot will only give you root, you need to have CWM to flash .zip files as ICS/JB roms comes packaged in .zip formats. so flash kernel with CWM . follow this
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.
Thanks ! will use JW4 sf root
ROOTED SUCCESSFULLY! thanks.