Related
Hi,
I have a rooted GT-i9000m (bell Galaxy S Vibrant). I used the one click lag fix to root my phone and it works fine.
A few days ago out of no where all the apps started auto closing as soon as i opened them and then both the menu and back touch buttons lit up and the screen went black. I held the power down till it rebooted only to get and error with com.android.calendar even tho I never use the app. When it finish's booting none of my installed apps are showing.
The first time it happened with com.android.app and I did a full wipe and factory reset and just reinstalled everything.
Ideally I don't want to system reset to factory settings again and lose all my files and notes that i copied back on to the phone 2days ago...
Please note I have tried clearing the data for the calendar app in settings -> apps and i cleared the calendar back up. My problem is that none of my installed apps are showing...
(Update) I also cant reinstall or update apps due to a Installation error - Insufficient storage. But there's room on both SD cards. I also set 850mb for apps when i did the one click lag fix and i don't have 850mb of apps installed.
(Update 2) I did a factory reset again this time i didn't format the internal and external SD cards. (It works like new again) Thus I got to keep all my personal files and ring tones ect. The only thing that was deleted that I didn't back up is my Notes. This leads me to my new question whats best for backing up apps on a rooted SGS (bell Vibrant)?
If anyone has answers they would be much appreciated.
i had the same problem
install rom manager from the market place
there is a option in there "Fix Permissions" just run that and it will fix it up for you
only takes 1-2min to run
Tried what you said but i cant install anything... I get Installation Error - Insufficient storage available.
I now understand the cause of the problem. I change my battery once and some times twice a day. At first I would wait for the long shut down (untill the screen goes totaly black) and then take off the back and swap out the battery. At least 3 times the phone would boot up and ask me for the network unlock code (I bought the unlock code directly from bell for 75$). I found this rather annoying so i tried just taking the battery out wile it was on (idle) and it appeared to work flawlessly at least 20-30 times before the phone would start to do an endless force close loop cycle. This kept forcing me to do a factory reset on the phone. I can only assume the one click lag fix and my disregard for the need of the shutdown before removing the battery must be all the cause of my problems.
I will try and see if my phone is more stable with out the one click lag fix.
nope that is not the cause of the problem
but it sounds like you are another victim of the lag fixes that is killing your internal SD card.
not the fault of the lag fix, it just make the problem apear sooner than later
I have been having a similar issue and I'm using Voodoo lagfix. I think it's because I took the battery out before it had completely shut down.
read this
http://forum.xda-developers.com/showthread.php?t=793404
Well the phone bit the dust today. I opened up google maps to look up an address and it crashed with the usual error. So i rebooted the phone and now it stays stuck at the boot logo. (the glowing S with both touch keys staying lit) So i did the recovery thing again but this time I had to do the Vol-up + home + power in order to get the phone working some what. IDK but it wont let me log into my google account to sync my contacts. My APN settings are correct and working and I even tried off my Wifi at home. I'll just hope its a google problem and not my phone acting up. Thanks for the pointer to the bad internal SD. That may be the problem kinda hard to prove it to Samy thoe...
I get force close errors after about 4-7 days of use. Now its gotten worse. A few days ago I was looking up an address and my phone crashed and rebooted it self. It then hug at the S boot logo for 20mins. I got to my friends apartment building to find my phone still stuck at this boot logo. I couldn't remember his apartment number or buzzer code... Normally i just check my contacts list and buzz the code. I was standing out side in the Canadian fall cold wind trying to get this phone to work... OMG i almost just smashed it on the spot. Anyways I remembered about something i had read on this forum about the recovery mode ( i had used it to root ) so i tried that out got the little menu and tried every option before having to do the dreaded factory reset. Well nothing work with the exception of the factory reset it got my phone working in about 5mins... LOL
Anyways I thought I might try upgrading the firmware when I got home. What a mistake... I cant control my phones MP3 player via my bluetooth car stereo any longer. Tried everything even a factory reset and formatting the internal and external SD's. I tried running it with out rooting it again and with out the lag fix in hopes that I wouldn't get a force close error. Wouldn't you know it about 5 hours after the factory reset un-rooted just after i finish coping over all my music. I get a force close error! So I tried again and this time the phone ran for about 30hours before it started giving me force close errors about the email now...
Sigh I've tried just about everything in my power to make this phone work. So I assumed it must be the phone... I called Samsung up to get a RMA going... Wouldn't you know it they tell me that I have to call my carrier to get it RMA/repaired. I try to explain that I bought the phone with out a contract and bought the unlock code from Bell so I could use it on Fido. They tell me to call Fido... ROFL Fido wouldn't even give me their APN settings when i got this phone so knew they would be of no help. They don't even have one android phone in their line up i tell the sammy rep. So they tell me I should go back to the Bell store I bought it from to get it repaired/RMA'ed.
I doubt Bell will be of much help but here's hoping.
Do you think my phone is broken, bad flash, buggy memory, ect and needs to be RMA'ed?
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.
Not sure if this discussion has already happened.
I have noticed twice since rooting my nook (with 2.12.25) that it has randomly restores back to 1.0.0 (or seemingly).
The first time it was just sitting beside me and it did one of its un-commanded restarts. I noticed that it was reloading the original 1.0.0 version. I lost everything and the nook was unresponsive after finishing. I followed all the hard reset rules and then upgraded to 1.0.1. I then autorooted again and reinstalled all apps.
Last night it did it again while I was using it. I was reading a book and then went to check email. I got an error message something like "invalid authorization" and that it was reloading the base software. I let it do its thing and go through its reboots. I also let it automatically update to 1.0.1 before I touched it. I re-registered it. Now when it loads it doesn't show the normal rooted nook boot screens. When I go into extras I see only the stock apps plus the additional ones that the auto-nooter loads (everything else gone). I tries to get me to log into LogicPD Zoom (Google) but it fails to load.
Has anyone else seems this?
Is there a way to re-load or fix the nook color install without having to go through the complete wipe process?
Once I fix is there some setting we can change to prevent it from happening again?
Thanks
After nootering the nook, I proceeded to load clockwork mod and made a backup of the OS. Now when it auto restores, I can reinstall the backup from clockwork mod by holding both Power and the Nook Key for five seconds when powering on.
Still don't seem to know how to stop the auto restoring though
Mine restarts too, has since I rooted it. Thankfully, there is no data loss, just an inconvenience. If there were a log being kept (like in other OSs), I could at least go there to find out what is crashing it.
Acts like a low memory restart, but that isn't what it is.
TJD
Wanted to add that mine does this also. It has happened 3 times in 4 weeks. Thank god for ClockWork it is not to big a deal now to restore. I wish someone could figure this out tho.
Mine actually randomly boots up (I'll have it off, then hear it start up a few hours later). Not sure it's related, but thought I'd mention it in case it turns out to be.
Sent from my PC36100 using XDA App
Mine used to restart everytime it went to sleep. Happens to alot of people. SetCPU and On Demand usually fixes it. There is like 2 or 3 of these threads in Q&A
straby187 said:
Mine used to restart everytime it went to sleep. Happens to alot of people. SetCPU and On Demand usually fixes it. There is like 2 or 3 of these threads in Q&A
Click to expand...
Click to collapse
Except they're talking about the system restoring itself, not rebooting.
It has to reboot to restore. Thought if you fix the reboot problem it would help maybe not... My bad
I'm autonooted on 1.0.0 and have never had an ota restore or update.
Sent from my Nook Color
Have you guys made sure to rename the otacerts file after rooting?
There are several active threads on this. In my case it was a faulty power button. I went ahead and exchanged the unit. Replacement is 1.01 and feels like the case is sturdier. Might be imagining that. Check my other posts on the subject. Good luck.
Sent from my NC using XDA app
First I thought that I'm crazy but now I can confirm that my NC will boot on it's own after about 5 minutes after power OFF. I have to shut down 2nd time and than it will stay OFF. Any idea what's wrong ?
Thanks
(Yes I did confirm after first shut down that it's actually OFF since no buttons will respond)
Any weather Apps running? Many of them have an option to wakeup in order to update. Check your mail, twitter and facebook apps. It has to be something you installed, I have run every update, tried all the froyo images and both Honeycomb releases and I have not seen that.
To expand on what gedster wrote, it seems kind of crazy and out there but what about any devices on your network that might send Wake on Lan requests? What if something on your network had located your NOOKcolor. I don't even know why a eReader Tablet would have a function for Wake on Lan but it's just another crazy avenue to jog down.
I do have weather app installed but I find it hard to believe that it can wake up OS that is not in standby but completely off. WIFI is also not enabled before shutdown.
Looks like the problem is there only if I used market, if market is not used it will shut down fine and it will not boot on its own.
lifeisfun said:
Looks like the problem is there only if I used market, if market is not used it will shut down fine and it will not boot on its own.
Click to expand...
Click to collapse
Seems that's unlikely if you're the only one having the issue, I'd keep digging if I were you.
Looks like you're right I can't replicate the problem every time
The timing when it will boot also varies 5, 15 and even 35 minutes.
Don't know what to do, it's hard to imagine how it can boot on it's own from
complete power off state
I can't believe I'm the only one with this problem
lifeisfun said:
I can't believe I'm the only one with this problem
Click to expand...
Click to collapse
I just posted a thread about this issue for me less than an hour ago! Funny, no one replied to mine: http://forum.xda-developers.com/showthread.php?t=940713. It was pretty long...guess I should've added a TL;DR.
It happens to me on any (or no) power source. Timing varies like yours as well. I'm going to pull my weather app based on the above recommendation, and I will try your Market theory out. Knowing someone else has this issue makes me hopeful that we can find something that we have in common as the culprit.
I did download the newest Honeycomb image yesterday and I'm going to put that SD card in and see if I can get it to turn itself back on on a Market-less, user App-less build. If successful I'll Titanium my 1.1 apps and remove everything non-system, then slowly add until I get this figured out. Keep me posted if you figure something out, I'll be sure to do the same!
In case it matters I bought mine about a week ago and the serial number starts with 20046.
EDIT: Testing with Honeycomb SD now so if that's the case here it should just stay off. I booted into Honeycomb at 9CST and turned it off at 9:01. I'll give it a couple of hours.
I used to have this same problem. I would randomly find my 1.0.1 auto-nootered 950mhz rom nook on, when I knew I had turned it off. interesting part is, this problem completely solved itself after I flashed my emmc with the custom nookie 5.9 img. so it must be an eclair issue and not a hardware issue
woot1524 said:
I used to have this same problem. I would randomly find my 1.0.1 auto-nootered 950mhz rom nook on, when I knew I had turned it off. interesting part is, this problem completely solved itself after I flashed my emmc with the custom nookie 5.9 img. so it must be an eclair issue and not a hardware issue
Click to expand...
Click to collapse
Really? I've been putting that off because I don't like the idea of not having Clockwork Recovery. I understand there are ways to do the same things using IOMonster's things but I'd really rather just have Clockwork Recovery working. Unless there's a way to get it going that I missed?
Yup, I've been having this issue as well. I really want to flash NF but I want hardware video acceleration.
oscillot said:
Really? I've been putting that off because I don't like the idea of not having Clockwork Recovery. I understand there are ways to do the same things using IOMonster's things but I'd really rather just have Clockwork Recovery working. Unless there's a way to get it going that I missed?
Click to expand...
Click to collapse
you are correct that clockwork does not work with froyo. however the bootable sd card that you would burn automatically starts up clockwork first. you can run a backup and restore, as far as i know, without having to reflash froyo. on a personal note, froyo still has some issues but overall I'm exteremly pleased so far. i really just wanted to get rid of all of the b&n stuff (mainly the status bar) along with any possible way of them pushing an update to break root. I would recommend it, but CM 7 with gingerbread will probably be out sooner rather than later.
woot1524 said:
you are correct that clockwork does not work with froyo. however the bootable sd card that you would burn automatically starts up clockwork first. you can run a backup and restore, as far as i know, without having to reflash froyo. on a personal note, froyo still has some issues but overall I'm exteremly pleased so far. i really just wanted to get rid of all of the b&n stuff (mainly the status bar) along with any possible way of them pushing an update to break root. I would recommend it, but CM 7 with gingerbread will probably be out sooner rather than later.
Click to expand...
Click to collapse
Which I guess brings us back to, why is Eclair doing this, and why does it seem to be limited to lifeisfun and myself?
I'm glad I'm no longer special
My serial # is 200503 .....
Removing all application that I have installed didn't help.
Only 100% way to shut down is to let it boot and immediately shut down.
unknown.soul said:
Yup, I've been having this issue as well. I really want to flash NF but I want hardware video acceleration.
Click to expand...
Click to collapse
Now that I understand the power of this things SD slot and that CWR can be run off of an SD, I can totally live with that. Hardware Video isn't a must for me yet, so I may take the plunge tonight after work...BTW, what are people's favorite video apps? I have been playing with VLC stream and convert, which works somewhat with my media server's samba shares. I have the share mounted to a directory on the sdcard since many apps look there exclusively.
More on topic, I couldn't get SD Honeycomb to start itself on its own. I tried booting then shutting down. 2 hrs of nothing 15mins light activity then shutting down. 2 more hours of nothing. About an hour of heavy use, seeing what could be installed, sideloading, testing, editing things like build.prop and rebooting often and trying to get swype working (don't think it's supposed to, but that's "heavy use" for me.) Powered down. Went to bed. Still not on this morning. This looks indeed to be an issue with the B&N stock Eclair.
Mine doesn't turn itself on with no interaction at all, but will turn on every time when you plug in the charger or cable hooked to USB port in computer.
I can turn it off once it is already plugged in and it will stay off, but remove and replug the charger and it is on again.
Strange.
Well, strange that only two or three of us noticed this strange problem.
Yeah, started for me after 1.1 update. Turned it off last night, tonight it was on with 40% battery! I think its 1.1 related, this didn't happen with 1.0.1 ...
I'm sure there's a condition that's causing or exasperating this issue, something common to us all. But at this point since I don't use the Nook as a video player (I actually bought it to read books, but I use Aldiko and the open epub format) I will likely flash Nookie to the eMMC and call it a day. Honestly can't wait to get a clean notification bar on this thing anyway.
hey guys, I don't know what's going on with my S7 but yesterday was working fine and out of nowhere everything started to FC! From twitter to "Google Services Framwork", Gmail, browser, tweetdeck, calendar, voice, I can't pretty much use it anymore, I haven't done any new app installations so i don't know what's wrong! is it just me, or anyone else having this problem??
Any help will be much appreciated!
Thanks
That has happened to me 4 or 5 times. It's like half of the device gets erased but the apps are there. Everything force closes. I end up having to erase the device and re-install everything. Reboot into recovery if you can't figure it out and format the system and data. For some reason when i do that, i keep root. Not entirely sure how that happens, but one less step for me. I think root is power and one of the volume buttons.
djdanska said:
That has happened to me 4 or 5 times. It's like half of the device gets erased but the apps are there. Everything force closes. I end up having to erase the device and re-install everything. Reboot into recovery if you can't figure it out and format the system and data. For some reason when i do that, i keep root. Not entirely sure how that happens, but one less step for me. I think root is power and one of the volume buttons.
Click to expand...
Click to collapse
ha! i remember I already did that. After the Update we had, and I exchanged mine for a new one I decided to stay with no root (i don't know why! lol) so I guess I'll reset everything and go back to root I figured at the end I was gonna do that, but I was trying to see if it was just me or there was a fix
thanks man!
ok, so since yesterday I've been trying to factory reset the DS, and when it boots back on, everything stays the same!
I'm a little confused now, if I take a picture and I turn the tablet off, when I turn it back on, the picture disappears. Same thing happens if I move widgets, delete or create new ones on the screen, they go back to as the configuration was on friday night! GV not working, and the last message that shows there, same thing, shows the last one on friday. I don't know what can I do.... should I call dell??
duck tape and dynomite
stupid thing started crashing yesterday FC this and FC that ....cant restore it as i no longer have write access to the internal sd card
1) tried nv flash
2) tried restoring from clockwork
3) tried pushing files through adb
4) tried fastboot ....
if i didnt just dump money into this thing id blow it up ......
any help would be appreciated.......any tips to fix it or kill it completely so i can get another one
actually deleted all of the files on internal sd card and uninstalled every program on the device looked completly stock ....rebooted it and it went back to how it was yesterday ......theres gotta be a reason why other are having the same problem that started on the same day .....maybe dell pushed an OTA update and screwed us ......just a thought cause mine was fine till i went 4g yesterday so my sis could post facebook pics ....not sure but hope we can figure this out
Samething happened to me
Hi, did you ever find a solution? my streak 7 was ran out of battery, before it shut off, the screen started flickering and then it turned off. after it came back on, it looked like it was fine, everything looked normal, but then everything started force closing, haven't found a solution
jz83 said:
Hi, did you ever find a solution? my streak 7 was ran out of battery, before it shut off, the screen started flickering and then it turned off. after it came back on, it looked like it was fine, everything looked normal, but then everything started force closing, haven't found a solution
Click to expand...
Click to collapse
I'm running stock, and I discovered the hard way that you can't let the S7 battery run all the way down. The S7 will not power itself down in time. I had the same issue, and the only way around it was to do a complete factory reset, using the menu button from the main screen. I think the reset is in the "About" section, but I don't have my S7 with me now.
Being used to WM6, which powers the device down at 5%, I was not expecting the device to do this, but there it is.
dell streak 7
im not sure if I am the only one with this issue you but becareful with the streak 7 mine well both of mine wont charge properly and the newest one wont charge at all. i have to send it back to dell for them to fix it. Im not sure what cause this but my only advie is to never use a different charger for it only dell chargers. Im guessing that it messes up the battery callibration and then it gets really hot when charging
Brief history: I bought my Kindle Fire HD in November 20012. It was the first android device I had, so I did not know anything about it. My first search was for rooting, thing that I could make with the help of this forum. From that moment I started reading the forum because everything was new to me and interesting. Meanwhile my rooted kindle worked fine until at some point began to turn off alone. With help of some people of this forum, I was noticed that the problem were gmail notifications. I disabled the notification and the problem was fixed for several months . . . but after that she started doing it again.
There began -also with the help of people on the forum- an odyssey of endless tests, install and uninstall apps, upgrades, downgrades, battery calibrations, etc. until I decided to install TWRP and flash CM 10.2. Of course I learned a lot in this process and I am very happy with CM 10.2.
But what which leaves me sad, very sad and frustrated, is that remain turning off arbitrarily and randomly!!!!!
It can spend two whole days working fine until battery is low, but it can also happen that its turns off every 10 minutes. It is totally independent of the battery charge, although it tends to do more when it is around 50%!
After that, sometimes I can turn-it on normally, but sometimes I have to try 10 or 20 times because she turn off again while charging system.
If I plug-it (to wall or PC) she normally turns on and does not auto turn off again (while plugged).
My latest finding is that if when she turns off itself I shake-it vigorously I can then turning on normally. It's like there's a loose connection or something like that.
As I'm outside the U.S. have no chance of sending it to Amazon.
I really appreciate if someone have some idea about this problem.
I want to thank again all those who given me very good suggestions. It is thanks to them that I learned a lot.
I edit to coment another thing. When I use Corpse Finder from SD Maid, it detect 3 files: .adobe-digital-editions; kindle and Digital Editions ( the three placed in: /storage/emulated/0). No matter how many times I clean it, they always are found in a new corpse search. I don´t know if that its relevant, but is strange to me.
The same problem, HELP US
Elgari said:
Brief history: I bought my Kindle Fire HD in November 20012. It was the first android device I had, so I did not know anything about it. My first search was for rooting, thing that I could make with the help of this forum. From that moment I started reading the forum because everything was new to me and interesting. Meanwhile my rooted kindle worked fine until at some point began to turn off alone. With help of some people of this forum, I was noticed that the problem were gmail notifications. I disabled the notification and the problem was fixed for several months . . . but after that she started doing it again.
There began -also with the help of people on the forum- an odyssey of endless tests, install and uninstall apps, upgrades, downgrades, battery calibrations, etc. until I decided to install TWRP and flash CM 10.2. Of course I learned a lot in this process and I am very happy with CM 10.2.
But what which leaves me sad, very sad and frustrated, is that remain turning off arbitrarily and randomly!!!!!
It can spend two whole days working fine until battery is low, but it can also happen that its turns off every 10 minutes. It is totally independent of the battery charge, although it tends to do more when it is around 50%!
After that, sometimes I can turn-it on normally, but sometimes I have to try 10 or 20 times because she turn off again while charging system.
If I plug-it (to wall or PC) she normally turns on and does not auto turn off again (while plugged).
My latest finding is that if when she turns off itself I shake-it vigorously I can then turning on normally. It's like there's a loose connection or something like that.
As I'm outside the U.S. have no chance of sending it to Amazon.
I really appreciate if someone have some idea about this problem.
I want to thank again all those who given me very good suggestions. It is thanks to them that I learned a lot.
I edit to coment another thing. When I use Corpse Finder from SD Maid, it detect 3 files: .adobe-digital-editions; kindle and Digital Editions ( the three placed in: /storage/emulated/0). No matter how many times I clean it, they always are found in a new corpse search. I don´t know if that its relevant, but is strange to me.
Click to expand...
Click to collapse
I HAVE THE SAME PROBLEM, I DON´T KNOW WHAT´S HAPPEN. Can you fix it?
i have heard occasionally around on the forums of peoples power buttons and such doing this after a while, if that is the case you might be able to test for it but its kinda complicated. Is it sleeping or shutting off? If it's shutting off it would be interesting to see why but you'd have to have either a logcat running on the pc the entire time, a cat of the kmsg, or something of that nature running and turn off while its doing that, then you can find the root of the problem. If it won't do it while plugged in, cm has a way to wirelessly do adb commands. I think hashcode said in his sources theres a test binary for the buttons to see if they are doing anything, but i'd have to figure out how to cross compile it by itself if thats the case, unless its precompiled.
Yes, cassualy I fix it last week. I open the Kindle, looking the wires and conectors and close again. And voila . . . fixed!
Enviado desde mi Amazon Kindle Fire HD mediante Tapatalk