Database Develop

[Q] Failed firmare.zip flash, stuck in 4 exclamation marks

Hey all,
I've just had an failed firmware.zip flash (as said I've done this twice) now my HTC One is stuck on 4 exclamation marks screen.
Phone was a Three UK model, with stock rooted ROM (S-ON Android 4.1.2) I by mistake have tried to flash firmware.zip from extracted from my OTA update to android 4.2.2
Here's output from getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***
(bootloader) imei: ***
(bootloader) meid: ***
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3779mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.041s
Now I'm little bit stuck, how can I recover my phone from this, whatever to stock 4.2.1 or updated 4.2.2 android?
I would appreciate any help & clues, thanks!

dgorecki said:
Hey all,
I've just had an failed firmware.zip flash (as said I've done this twice) now my HTC One is stuck on 4 exclamation marks screen.
Phone was a Three UK model, with stock rooted ROM (S-ON Android 4.1.2) I by mistake have tried to flash firmware.zip from extracted from my OTA update to android 4.2.2
Here's output from getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXX
(bootloader) imei: XXXXXXX
(bootloader) meid: XXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3779mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.041s
Now I'm little bit stuck, how can I recover my phone from this, whatever to stock 4.2.1 or updated 4.2.2 android?
I would appreciate any help & clues, thanks!
Click to expand...
Click to collapse
can you access the custom recovery?

OK, Topic can be deleted/closed, on 4th attempt of flashing firmware.zip, everything has end up in a success
I can't really explain more.

delete

[Q] factory reset

I have been trying to do a factory reset of my phone to remove storage encryption from settings/restore and reset but then phone just reboots and nothing changes
I have cwm recovery and from the recovery also I have tried to do wipe and reset but it says cannot mount data and other partitions
so I cannot install any of other Android updates
can anyone help me please on how to reset my phone to remove this annoying encryption so that I can install other updates.to my phone.
I am in Vodafone au phone with cid vodaph021 and Android version 4.1.2 bootloader unlocked cwm recovery installed and rTed.oo
I tried looking for the ruu for that cid but I could not find for it in the forum. I only found for other Telstra and Optus ones
getvar all info
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.980.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ****************
(bootloader) imei: *******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 3879mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.048s
can anyone help me please

[Q] Can't find the right ruu for me

I can't find the proper ruu for my device. I listed all my info below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4262mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT

SGodoy said:
I can't find the proper ruu for my device. I listed all my info below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE THIS
(bootloader) imei: REMOVE THIS
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4262mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
First: Remove IMEI and SN numbers from your previous post, confidential #
There is no RUU available for .666 sw (if I remember .666 is from bell mobility?)
There is no guru reset for .666 sw
but there is a Nandroid backup avaible for .666 on htc1guru.com here: http://www.htc1guru.com/downloads/stock-nandroid-downloads/

Okay so i downloaded M7 TWRP Nandroid Backup CID BM 001 3.23.666.1, went to fastboot and typed "fastboot flash recovery TWRP.img". Nothing happened so i changed it too "fastboot flash recovery TWRP.zip". I got this.....
C:\Fastboot>fastboot flash recovery twrp.zip
sending 'recovery' (1054139 KB)...
OKAY [ 48.591s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 176.495s

What is your goal?

SaHiLzZ said:
What is your goal?
Click to expand...
Click to collapse
To return it back to stock. Right now it's in boot loop state i cant get into recovery or my actual phone.

Unlock bootloader and try again

SaHiLzZ said:
Unlock bootloader and try again
Click to expand...
Click to collapse
Now i got this
C:\Fastboot>fastboot flash recovery twrp.zip
sending 'recovery' (1054139 KB)...
OKAY [ 48.785s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 48.807s

[Q] Need to get back to Kitkat/ Which RUU?

I am currently running Jellybean from a RUU and am trying to get back to Kitkat
-Every app is stuck in landscape mode
-Flashing Kitkat Roms doesnt work
-Using Kitkat RUU doesnt work(RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2 and RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_ ) Error Code 158
Really need some help, the phone is difficult to use and I want to get stock Kitkat so I can flash PA or stock
Using TWRP 2.7.1.1 (2.8.0.2 didnt help)
C:\Android>fastboot getvar all
(bootloader) version 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version: PVT SHIP S-OFF
(bootloader) serialno: ******************
(bootloader) imei: ******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT_8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3961mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar: all FAILED (status read failed(Too many links))
finshed. total time: 0.212s

Boot Loop

Hey guys,
My M7 seems to be stuck in a boot loop. When I start it I get the HTC logo, then the screen will turn off and it'll restart. I can still access fastboot. I can flash clockwork mod and boot to it with occasional success but I haven't gotten TWRP to work. I can access adb through clockwork though so maybe that can be useful. I've tried flashing the latest RUU and a couple older versions via fastboot; usually I can get the phone to boot for a couple of minutes and then it will restart and be back in the bootloop. I have s-off and the bootloader is unlocked currently. I've also tried flashing the RUU relocked, no success.
I have the AT&T 32GB version in black. Here's the fastboot getvar all response:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3715mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
The last thing I tried to do is flash an old RUU that's why the software version is old. I starting having these problems when I was on version 7.23 I believe. If anyone has some ideas for me I'd appreciate it!