Related
HTC Pushed an update to my HTC One Dev Ed tonight..
1.29.1540.16
When it tries to flash the update it just goes into TWRP recovery. No other actions.
I then drilled down to the directory that it downloaded to /data/media/downloads and tried to flash with TWRP.. no dice.
Here is the update.. but honestly I don't know what it does.
any Idea on what is preventing the flash?
deligator said:
HTC Pushed an update to my HTC One Dev Ed tonight..
1.29.1540.16
When it tries to flash the update it just goes into TWRP recovery. No other actions.
I then drilled down to the directory that it downloaded to /data/media/downloads and tried to flash with TWRP.. no dice.
Here is the update.. but honestly I don't know what it does.
any Idea on what is preventing the flash?
Click to expand...
Click to collapse
It only work on stock recovery, not on any custom recovery like TWRP or CMW.
lucky76 said:
It only work on stock recovery, not on any custom recovery like TWRP or CMW.
Click to expand...
Click to collapse
any workaround? ... other than going back to stock recovery.
deligator said:
any workaround? ... other than going back to stock recovery.
Click to expand...
Click to collapse
You must go back to stock recovery in order for the update to successfully flash on your device.
You don't need the update from HTC, just go and flash the latest revolution 10.2 rom, it is running 4.2.2 and it has some nice performance tweaks. And it isn't modified so it's running sense 5.
Sent from my HTC One using xda premium
deligator said:
any workaround? ... other than going back to stock recovery.
Click to expand...
Click to collapse
jlevy73 said:
You must go back to stock recovery in order for the update to successfully flash on your device.
Click to expand...
Click to collapse
How to do you go back to a stock recovery? Been down that road and it still didn't update.
akk60 said:
You don't need the update from HTC, just go and flash the latest revolution 10.2 rom, it is running 4.2.2 and it has some nice performance tweaks. And it isn't modified so it's running sense 5.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
For some of us, going to a different ROM is not a viable choice, and frankly a solution to load a different ROM does not answer the original question.
Hi I have the same problem here.
When I try to install stock 4.2.2, the phone reboot & automatically enter TWRP & thus stock update was unable to run.
kennfebruary said:
Hi I have the same problem here.
When I try to install stock 4.2.2, the phone reboot & automatically enter TWRP & thus stock update was unable to run.
Click to expand...
Click to collapse
None of the HTC direct updates will work while TWRP is installed.
you will have to
Fastboot flash (stock recovery .img)
then the updated from HTC works with no problems. pst if you can't find the img
My phone is S-OFF and Rooted stock but that annoying update now kept popping up. I let it download but after restarting my phone its just hung on the HTC white Boot screen. Is there anything i can do to revert this back to normal?
snowmaniac22 said:
My phone is S-OFF and Rooted stock but that annoying update now kept popping up. I let it download but after restarting my phone its just hung on the HTC white Boot screen. Is there anything i can do to revert this back to normal?
Click to expand...
Click to collapse
Backup?
BD619 said:
Backup?
Click to expand...
Click to collapse
I dont have a backup... i just was able to get into custom recovery after doing the hold the phone in the bright light trick. I tried pushing the custom OTA firmware and the Stock root ROM again and i am still stuck on the HTC One white screen
I tried pushing the custom OTA firmware and the Stock root ROM again
Click to expand...
Click to collapse
What do you mean by this?
BD619 said:
What do you mean by this?
Click to expand...
Click to collapse
Well the OTA kept asking to update every second. I pushed the .zip Firmware at HBOOT along with installing the stock rooted ROM. Everything worked fine until i accidently allowed the OTA update to install and rebooted the phone and it wont start back up now.
snowmaniac22 said:
Well the OTA kept asking to update every second. I pushed the .zip Firmware at HBOOT along with installing the stock rooted ROM. Everything worked fine until i accidently allowed the OTA update to install and rebooted the phone and it wont start back up now.
Click to expand...
Click to collapse
From recovery try this
adb push ROMname.zip /sdcard/
BD619 said:
From recovery try this
adb push ROMname.zip /sdcard/
Click to expand...
Click to collapse
If i have the ROM on my internal SDcard already could i just flash that through recovery? I know the big problem was installing the new OTA update through sprint.
BD619 said:
From recovery try this
adb push ROMname.zip /sdcard/
Click to expand...
Click to collapse
I am not sure i am explaining this well either. I am rooted... S-OFF... I installed the custom .zip for firmware from themikmik forum (captin)... which was installed through HBOOT on an external SDCard. I then Installed the Stock rooted from From captin. All was good until the notification to update OTA popped up and accidentally installed. After the phone rebooted it will never get past the white HTC One screen. I can boot into my Custom recovery and that is all i can do.
snowmaniac22 said:
If i have the ROM on my internal SDcard already could i just flash that through recovery? I know the big problem was installing the new OTA update through sprint.
Click to expand...
Click to collapse
Yeah give it a shot.
Also within twrp choose File Manager and navigate to your Internal sdcard and find the downloads folder and delete the OTA file.
Not 100% sure that will work but it's worth a shot.
BD619 said:
Yeah give it a shot.
Also within twrp choose File Manager and navigate to your Internal sdcard and find the downloads folder and delete the OTA file.
Not 100% sure that will work but it's worth a shot.
Click to expand...
Click to collapse
Also i am using Philz Touch not TWRP recovery if that makes a difference. I installed the ROM again and still the same problem
snowmaniac22 said:
Also i am using Philz Touch not TWRP recovery if that makes a difference. I installed the ROM again and still the same problem
Click to expand...
Click to collapse
Also there is no OTA in downloads only the ROM
snowmaniac22 said:
Also i am using Philz Touch not TWRP recovery if that makes a difference. I installed the ROM again and still the same problem
Click to expand...
Click to collapse
Hmmm I don't know a lot about PhilZ but I'm pretty sure there is a file manager included somewhere
BD619 said:
Hmmm I don't know a lot about PhilZ but I'm pretty sure there is a file manager included somewhere
Click to expand...
Click to collapse
Yeah and i dont see anything about the OTA but i know some of the OTA modified the Firmware also. I just am lost at how to do anything out of recovery.
snowmaniac22 said:
Yeah and i dont see anything about the OTA but i know some of the OTA modified the Firmware also. I just am lost at how to do anything out of recovery.
Click to expand...
Click to collapse
You cold try fastboot flashing the stock recovery and see if the OTA will continue
https://www.dropbox.com/s/j3jjhti461otrbd/Stock_1.12.651.17_recovery.img
I personally never take the OTA.
All I know is you have to have a stockish rom and stock recovery for the OTA to flash
BD619 said:
You cold try fastboot flashing the stock recovery and see if the OTA will continue
https://www.dropbox.com/s/j3jjhti461otrbd/Stock_1.12.651.17_recovery.img
Click to expand...
Click to collapse
Ok i will try that thanks! I am on a mac osx and need to use terminal. Do you know what i might need to intput to flash that? Or could i put this on an external SD card and boot into the bootloader?
You flash it the same way you flashed PhilZ
fastboot flash recovery nameofrecovery.img
BD619 said:
You flash it the same way you flashed PhilZ
fastboot flash recovery nameofrecovery.img
Click to expand...
Click to collapse
Thanks again . Is me being rooted or using a rooted ROM going to be a problem once i go back to stock recovery?
snowmaniac22 said:
Thanks again . Is me being rooted or using a rooted ROM going to be a problem once i go back to stock recovery?
Click to expand...
Click to collapse
Shouldn't be a problem.
If the OTA installs just re-flash PhilZ afterwards
BD619 said:
You flash it the same way you flashed PhilZ
fastboot flash recovery nameofrecovery.img
Click to expand...
Click to collapse
sweet baby jesus i wiped everything i could think of and were back in business. Thanks again for your patience !
snowmaniac22 said:
sweet baby jesus i wiped everything i could think of and were back in business. Thanks again for your patience !
Click to expand...
Click to collapse
Nice glad you got it
i recieved several times a message saying that i have to install a security update (at&t), after some time i decided to install it but when i try to i get a status 7, another thing what do i need to install a custom rom on my arix hd, it has android 4.1 from at&t, unlocked bootloader, cwm, and carrier unlocked (i dont want to loose this), in my touchpad i just have to download the rom + gapss and install them from a custom recover, so i dont know if this is the same for the atrix hd, thanks in advance.
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
audit13 said:
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
Click to expand...
Click to collapse
ok thanks for answering, i have stock rom so, but unlocked bootloader can i install it then just by installing the stock recovery?
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
audit13 said:
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
Click to expand...
Click to collapse
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
maur1c10 said:
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
Click to expand...
Click to collapse
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
audit13 said:
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
Click to expand...
Click to collapse
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
thanks to both of you, yes the phone rebooted itself like about 40 secs from turning on i was able to fix this part by formatting cache from cwm, now im gonna try to flash stock recovery
quasihellfish said:
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
Click to expand...
Click to collapse
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
maur1c10 said:
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
Click to expand...
Click to collapse
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
audit13 said:
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
Click to expand...
Click to collapse
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
maur1c10 said:
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
Click to expand...
Click to collapse
Which stock ROM did you install? There are 2 versions of 4.1.1.
audit13 said:
Which stock ROM did you install? There are 2 versions of 4.1.1.
Click to expand...
Click to collapse
Blur_Version.98.4.20.MB886.ATT.en.US is the one that my phone already had
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
audit13 said:
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
Click to expand...
Click to collapse
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
maur1c10 said:
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
Click to expand...
Click to collapse
Did you flash 98.4.20 or 98.5.38?
audit13 said:
Did you flash 98.4.20 or 98.5.38?
Click to expand...
Click to collapse
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
maur1c10 said:
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
Click to expand...
Click to collapse
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
audit13 said:
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
Click to expand...
Click to collapse
i used myth (easier to use), could that make any difference?
maur1c10 said:
i used myth (easier to use), could that make any difference?
Click to expand...
Click to collapse
I got a Bell Canada Atrix HD from a co-worker. When I used Myth to flash from stock Bell to stock ATT, it would not work properly. When I used RSD with 98.4.20 without going through Myth, the ATT ROM flashed without any errors. I was able to take the OTA update, flash CWM, and revert to a custom ROM.
TMB-G920TUVU4EPF1-20160627114318.zip
**Note** this latest firmware prevents downgrading to all previous firmware's.
muniz_ri said:
TMB-G920TUVU4EPF1-20160627114318.zip
**Note** this latest firmware prevents downgrading to all previous firmware's.
Click to expand...
Click to collapse
What's the good in it?
britchel said:
What's the good in it?
Click to expand...
Click to collapse
Why is there no chatter about the EPF1 update?
I've been scanning the boards and not much about it... It appears to just to be simple Android Security Update, yet no one has really said anything about it..
Zaphodspeaks said:
Why is there no chatter about the EPF1 update?
I've been scanning the boards and not much about it... It appears to just to be simple Android Security Update, yet no one has really said anything about it..
Click to expand...
Click to collapse
I updated, but haven't noticed much of a difference. Apparently it adds an anti-theft feature that requires you to enter your google login information before it will let you reset the phone.
I can't wait for someone to root it.
bh1136 said:
I updated, but haven't noticed much of a difference. Apparently it adds an anti-theft feature that requires you to enter your google login information before it will let you reset the phone.
I can't wait for someone to root it.
Click to expand...
Click to collapse
Just install TWRP via ODIN, Install SuperSu and Enjoy..
Zaphodspeaks said:
Just install TWRP via ODIN, Install SuperSu and Enjoy..
Click to expand...
Click to collapse
Could never find twrp
britchel said:
Could never find twrp
Click to expand...
Click to collapse
Google is your friend..
Google TWRP Galaxy S6 T Mobile
and you will find this
https://dl.twrp.me/zerofltetmo/twrp-3.0.2-0-zerofltetmo.img.tar.html
Download the TAR file and install via ODIN, and be sure to select AP, or you will destroy your device..
Edit: Once you install TWRP, then install SuperSU here : https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Zaphodspeaks said:
Google is your friend..
Google TWRP Galaxy S6 T Mobile
and you will find this
https://dl.twrp.me/zerofltetmo/twrp-3.0.2-0-zerofltetmo.img.tar.html
Download the TAR file and install via ODIN, and be sure to select AP, or you will destroy your device..
Edit: Once you install TWRP, then install SuperSU here : https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Click to expand...
Click to collapse
Thank you, sir
I really appreciate!
britchel said:
Thank you, sir
I really appreciate!
Click to expand...
Click to collapse
Flash SuperSu in Recovery, don't try to flash it in ODIN..
Zaphodspeaks said:
Google is your friend..
Google TWRP Galaxy S6 T Mobile
and you will find this
https://dl.twrp.me/zerofltetmo/twrp-3.0.2-0-zerofltetmo.img.tar.html
Download the TAR file and install via ODIN, and be sure to select AP, or you will destroy your device..
Edit: Once you install TWRP, then install SuperSU here : https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Click to expand...
Click to collapse
Anyone having an issue with this update? I went back to stock for this update, then tried to apply TWRP, and the recovery doesnt stick, stays with the android default.
Edit: nvm...
I was afraid of this.. It may because of the new Secure Bootloader that if something isn't signed by Samsung or T mobile.. It may flash, but then buffer out and not install..
ohthesepaws said:
Anyone having an issue with this update? I went back to stock for this update, then tried to apply TWRP, and the recovery doesnt stick, stays with the android default.
Edit: nvm...
Click to expand...
Click to collapse
Nvm? I'm guessing you wrote something different? Or Nvm to the above sentence?
muniz_ri said:
TMB-G920TUVU4EPF1-20160627114318.zip
**Note** this latest firmware prevents downgrading to all previous firmware's.
Click to expand...
Click to collapse
ohthesepaws said:
Anyone having an issue with this update? I went back to stock for this update, then tried to apply TWRP, and the recovery doesnt stick, stays with the android default.
Edit: nvm...
Click to expand...
Click to collapse
What are you guys talking about?
This update shouldn't prevent flashing a recovery, nonetheless be able to boot into download mode/odin mode and flash an older firmware.
I am downloading this atm, let me know if I am wrong.
Update: Flashed the update, flashing TWRP is fine.
gravitysandwich said:
What are you guys talking about?
This update shouldn't prevent flashing a recovery, nonetheless be able to boot into download mode/odin mode and flash an older firmware.
I am downloading this atm, let me know if I am wrong.
Update: Flashed the update, flashing TWRP is fine.
Click to expand...
Click to collapse
The final question is, did it stick? Boot to Recovery and let us know.
Also, is root and custom kernel working fine?
J-Hop2o6 said:
The final question is, did it stick? Boot to Recovery and let us know.
Also, is root and custom kernel working fine?
Click to expand...
Click to collapse
Yes TWRP sticks.
Root works fine.
I am guessing a custom kernel would work fine, provided it is based on this firmware.
I am not going to test any as I have no need for a custom kernel.
ohthesepaws said:
Anyone having an issue with this update? I went back to stock for this update, then tried to apply TWRP, and the recovery doesnt stick, stays with the android default.
Edit: nvm...
Click to expand...
Click to collapse
When installing TWRP, while installing it through ODIN, uncheck the reboot..
It should stick...
gravitysandwich said:
Yes TWRP sticks.
Root works fine.
I am guessing a custom kernel would work fine, provided it is based on this firmware.
I am not going to test any as I have no need for a custom kernel.
Click to expand...
Click to collapse
Forgot to update earlier.
But yes, Root + TWRP + Custom Kernel + Xposed (v85+) works with this update.
Just to clarify, rooting and flashing twrp and supersu with this update on the tmobile galaxy s6 wont brick? I keep hearing that my bootloader is locked and i cant root with this build on my phone.
Edit: what is the best way to root? i keep hearing that i should flash a cf auto root file instead of twrp.
Zaphodspeaks said:
Flash SuperSu in Recovery, don't try to flash it in ODIN..
Click to expand...
Click to collapse
Hey, sr. For some reason it will not let me reboot to bootloader, can you help, or anyone?
Press the Power Key, Volume Down, and the Home Key at the same time while the device is powered off, that should put you into download mode..
Mind you that there is no official root method for EPF1, you can flash TWRP and then SuperSu to establish root
I'm rooted and on a custom rom on my Z1 but I've lost all recoverys since I installed it. I've tried using the TWRP app to install and Flashify but I just get a error saying " recovery partition not found " can anyone help me at all get TWRP or some recovery on my Z1?
I've no pc at the moment so I have to try get a recovery installed using just my phone.
Thx & I really hope someone can help I'm not liking the rom I'm on at all, rather stock rooted with xposed probably some kernel too.
RiceydDr0id said:
I'm rooted and on a custom rom on my Z1 but I've lost all recoverys since I installed it. I've tried using the TWRP app to install and Flashify but I just get a error saying " recovery partition not found " can anyone help me at all get TWRP or some recovery on my Z1?
I've no pc at the moment so I have to try get a recovery installed using just my phone.
Thx & I really hope someone can help I'm not liking the rom I'm on at all, rather stock rooted with xposed probably some kernel too.
Click to expand...
Click to collapse
Which rom do you use? Probably you should shut down your phone and then press simultaneously power and volume down. Up to when you hear the second vibrate, now you should only push volume down. Then your recovery should appear
DSTRÍIKER Rom bud and can't get into any recovery at all.... It's really annoying
RiceydDr0id said:
DSTRÃIKER Rom bud and can't get into any recovery at all.... It's really annoying
Click to expand...
Click to collapse
Stil got no pc?
Nope :-/
RiceydDr0id said:
Nope :-/
Click to expand...
Click to collapse
Bootloader locked or unlocked??
Remeber the more info you give less question I have to ask.
Model, rom, bootloader, root status etc
Unlocked bud
Then flash kernel image from Rashr app. Choose any stock based kernel. I like ok kernel. In the zip extract the boot image and then flash it through Rashr app from playstore. There you go kernel and recovery.
IL try now stock kernel only yea?
RiceydDr0id said:
IL try now stock kernel only yea?
Click to expand...
Click to collapse
Stock based kernel. Like ok kryptonian artemesia
I just did it with rashr & ok kernl... now my phone wont turn on!! just black with d red LED flashing on & off. Plzzzz god someone help me
Please tell me i can fix this
RiceydDr0id said:
Please tell me i can fix this
Click to expand...
Click to collapse
I am here don't you worry. First are you sure you are locked bootloader. Second please tell me exactly what you did. You can contact me on Hangouts for quick reply. Check your inbox I have sent you my mail id.
I said its unlocked iv a brick now ;-( im using my navidia shield to contact u..
RiceydDr0id said:
I said its unlocked iv a brick now ;-( im using my navidia shield to contact u..
Click to expand...
Click to collapse
Check your inbox I have sent you my mail id. Contact me there
What was the battery when you flashed it.
I have the problem too. I installed twrp from cmd everything was OK but cannot open the recovery. No led work when booting.
nemes480 said:
I have the problem too. I installed twrp from cmd everything was OK but cannot open the recovery. No led work when booting.
Click to expand...
Click to collapse
Did you ever flash. 236 fw??
If not this is the right time you have to do it once.
I did it maybe 100 times. But I m sorry i did it 101 time .5 miutes before your post and still doesnt work
Not just this type of the install give me error...