Dear XDA community users and Xolo A500s owners,
I found that we don't have a dedicated thread for this phone,thus starting a new one with some of my contributions.
NOTE: Never use the FLASHTOOL (any version) for A500s as it bricks the device since the preloader.bin file from stock rom also corrupts the rom in case you need to restore. :laugh::laugh:
Flash CWM or unbrick A500s with SP flash tool procedure
1) Extract the attached file on your computer (link)
2) Download xolo drivers from here (link)
3) Shutdown your phone and remove battery
4) Open SpFlash tool with admin priviledges and click next to scatter file to choose the MT6572 one from the downloaded folder
5) The tool will pick and check preloader.bin automatically and remaining ones will be unchecked (Select preloader.bin only if your device is bricked if its not and you only need to have cwm installed proceed to step 6)
6) To install CWM now double click on boot and recovery image and point to the downloaded folder to select boot_patch and recovery_patch accordingly (Remember to check it)
7)Now click Download and connect the phone via usb to computer (During this process your PC will show unknown device so in order to install device drives download xolo drivers and choose to select the inf file and it will get installed).Remove USB once and ensure download is clicked prior and then usb cable is inserted to PC.
8) The process will begin and a green circle saying ok will be displayed and thus the flashing is successful.
9) Now disconnect the device and put in battery and hold power and volume up key to sucesfully boot into CWM and there by unbrick your device...
10) Then you can install any custom rom created by other developers.
Note: If you wish to load complete stock rom for Xolo A500s download the stock rom from the links ABTri has posted in his forum and replace the preloader.bin with the attached one. This will restore your ROM to factory default with stock recovery.
To begin with i present you the stock deodexed cwm rom for our own Xolo A500s phone.
Steps:
1) Root your phone with framaroot (http://forum.xda-developers.com/attachment.php?attachmentid=2293503&d=1380569629)
2) Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and grant root access from the mtkdroid app to access your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
3) For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
Steps to install the deodexed rom
1) Boot into CWM recovery and download the stock deodex rom from here (http://www.toobigtosend.net/download/279913c4-3bd3-11e3-a7f9-005056ac53f8/)
2) Copy the downloaded rom to the sd card--> clockwordmod -> backup folder
3) Say restore and navigate to the cwmbackup folder and select it
4) Clear Dalvik cache and cache partition
Thats its reboot and you are on deodexed rom..
More download links will be available shortly Stay tuned..
This is the start of my development so i need more ideas on what can be included additionally.
And yes use the thank meter if you want to appreciate the work
Added new download link.
http://yadi.sk/d/j4zOwIfrBTMSp
Good news everyone, so the rom is finally here!!
DOWNLOAD LINK ROM v1
DOWNLOAD LINK ROM v2
Changelog v1:
1) Stock de-odexed & zipaligned based on 4.2.2
2) Removed all bloatwares which includes Xolo specific apps,google +, clock,taalk,themes,stock keyboard ,music etc
3)Added Xperia mod keyboard,inverted playstore,sms and calendar app.
4)Bravia mod is attached although i didnt see much difference
5)Viper audio added and works smooth.
6)Native Kitkat apps like google now,search and laucher added.
7)Font change to incorporate the new kitkat roboto
8)Included ES file explorer
Changelogs v2
1)Fixed clock
2)Added hangouts with sms integration
3)Added Google gallery for google pics sync
4)Some more bloatwares freed
5)Nexus 5 sounds,bootanimation,launcher and stock apps added except chrome google+
6)More smooth than earlier,less ram usage
Changelogs v3
1)Removed native kitkat apps
2)Remove google apps except google contact sync
3)Several build prop tweaks
4)Optimized RAM usage
5)New windows style audio/video player
6)Cool bootanimation (This hints something is coming soon )
7)Ported bravia mod,Xperia Z1 keyboard
8)Inverted SMS app
9)Nova modified launcher
10)And other cool softy
Changelogs XOLEW
1) Base firmware as S018 from official Xolo A500 Club
2) Completely deodexed and removed some bloatwares
3)New SMS app with themes/ miui style Dialer/Floating apps included
4)Smooth scrolling with 0 lag
5)Recent task bar get button to kill all at once
6)All new Xolo launcher with excellent themes
7)Cool new bootanimation from Xolo
8)Camera tweaks and addon
9)And ....many more so explore....
How to enable floating apps?
Just press back led button and u will see a small window in center screen..It contains media/video player which can be floated alongwith your other tasks.
DOWNLOAD XOLEWv1
If you need google apps and playstore with google now please use this additional package from goo.im to download and install.
V3 DOWNLOAD LINK
How to install
1) Root your phone as mentioned above and have CWM installed
2) Copy the rom in \sdcard and then clear/wipe data cache and dalvik cache. Format system also
3) Go to mounts and storage and ensure to see /system is mounted (unmount system is what we want to see on cwm menu)
4) Select install from sdcard and navigate through the zip and install it.
First boot may take some time to install and thats it the rom is up.
Enjoy and share your experience to make this development ongoing
Please hit thanks if you like the work....
**Screenshots attached***:good::good::good::good:
Upload all files at mediafire AND PLEASE UPLOAD A VIDEO TUTORIALS ABOUT FLASHING CWM AND DEODEXED STOCK ROM :sly::sly::sly:
NO ONE IS PERFECT
Definitely video and update is on the cards.
Sent from my A500s using xda app-developers app
Try to make a themed stock based gaming ROM with no stock bloatware applications
NO ONE IS PERFECT
Dear vishal, first of all THANK YOU very much for this.. (if possible, I could have pressed that thanks button hundred times!) The CWM works perfectly fine.
Still, I was not able to flash this rom as it said "md5 mismatch!" While trying to flash it through cwm.. I hope u find a solution to this and share with us ASAP or just tell me if I am doing something wrong...
Once again, thanks for that much needed Cwm!!
Sent from my A500s using xda app-developers app
KrishMehta said:
Dear vishal, first of all THANK YOU very much for this.. (if possible, I could have pressed that thanks button hundred times!) The CWM works perfectly fine.
Still, I was not able to flash this rom as it said "md5 mismatch!" While trying to flash it through cwm.. I hope u find a solution to this and share with us ASAP or just tell me if I am doing something wrong...
Once again, thanks for that much needed Cwm!!
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
* Simply open clockwordmod>backup>your back folder in your SD card
* Now open the nandroid.md5 file with any text editor application and delete all text in it and save it or make a file with name nandroid.md5 ( replace it with original file)
**If above doesn't work try below commands**
TYPE BELOW COMMANDS IN TERMINAL EMULATOR
su
# mount -o remount rw /sdcard
#cd /sdcard/clockworkmod/backup/2012-04-17.10.09.36(
WRITE NAME OF YOUR BACKUP FOLDER)
#rm nandroid.md5
#md5sum *img > nandroid.md5
***ENJOY FLASHING ROM IN CWM***
** REMEMBER TO PRESS THANKS BUTTON **
KNOW MORE TWEAKS ETC FOR XOLO A500S GO HERE
http://forum.xda-developers.com/showthread.php?t=2495531
NO ONE IS PERFECT
Ok guys so i am almost into final stages of building rom..can someone let me know if a complete black theme works and if any audio mod works live viper or beats.i have cut down all bloatwares..so stay tuned..
Sent from my A500s using xda app-developers app
vishalgunthey said:
Ok guys so i am almost into final stages of building rom..can someone let me know if a complete black theme works and if any audio mod works live viper or beats.i have cut down all bloatwares..so stay tuned..
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
dont know bout the theme but yes Viper works perfectly fine (Both FX & XHiFi).. couldnt flash AC!D, may be its not supported!
Thank you and i will include viper.
Also some good news. The new leaked kitkat apps work flawlessly on the device except for Google now which throws an error so looking for fix.
Here are some of the screen shots from current development build.
Sent from my A500s using xda app-developers app
vishalgunthey said:
Thank you and i will include viper.
Also some good news. The new leaked kitkat apps work flawlessly on the device except for Google now which throws an error so looking for fix.
Here are some of the screen shots from current development build.
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Screenshots??? where???
Ok everyone good news.. The rom is ready to be uploaded. This is a cwm flashable.. Lot of things added modified with inverted apps and native kitkat apps added along with viper.
Will post detailed Changelogs and screenshot.
I have tested it and must say it is smooth with around 249 mb free ram..
Removed almost all bloatwares.
Stay tuned.WIP..
Sent from my A500s using xda app-developers app
Thanks
vishalgunthey said:
Ok everyone good news.. The rom is ready to be uploaded. This is a cwm flashable.. Lot of things added modified with inverted apps and native kitkat apps added along with viper.
Will post detailed Changelogs and screenshot.
I have tested it and must say it is smooth with around 249 mb free ram..
Removed almost all bloatwares.
Stay tuned.WIP..
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Waiting for your ROM
iamnimit said:
Waiting for your ROM
Click to expand...
Click to collapse
me to awaiting...
KrishMehta said:
me to awaiting...
Click to expand...
Click to collapse
All the rom has been posted on page 1.. Enjoy
vishalgunthey said:
Dear XDA community users and Xolo A500s owners,
I found that we don't have a dedicated thread for this phone,thus starting a new one with some of my contributions.
NOTE: Never use the FLASHTOOL (any version) for A500s as it bricks the device since the preloader.bin file from stock rom also corrupts the rom in case you need to restore.
To begin with i present you the stock deodexed cwm rom for our own Xolo A500s phone.
Steps:
1) Root your phone with framaroot (http://forum.xda-developers.com/attachment.php?attachmentid=2293503&d=1380569629)
2) Install MTKdroidTools 2.4.8 from here (http://dfiles.eu/files/fmnok7ke7)
Download and run the MTKdroidTools.exe (Note enable usb debugging on your phone and grant root access from the mtkdroid app to access your phone)
Then backup your existing rom by clicking on root ,backup,recovery tab and backup. this will back up your entire stock rom in case you want to revert.
3) For CWM install click on Recovery and boot and choose the option "To choose the boot.img file" and then select your stock boot.img file which u backed up. Next it will patch it with CWM autoinstaller just click yes and ok and the device will reboot. Woola you now have a working CWM to proceed.
Steps to install the deodexed rom
1) Boot into CWM recovery and download the stock deodex rom from here (http://www.toobigtosend.net/download/279913c4-3bd3-11e3-a7f9-005056ac53f8/)
2) Copy the downloaded rom to the sd card--> clockwordmod -> backup folder
3) Say restore and navigate to the cwmbackup folder and select it
4) Clear Dalvik cache and cache partition
Thats its reboot and you are on deodexed rom..
More download links will be available shortly Stay tuned..
This is the start of my development so i need more ideas on what can be included additionally.
And yes use the thank meter if you want to appreciate the work
Added new download link.
http://yadi.sk/d/j4zOwIfrBTMSp
Good news everyone, so the rom is finally here!!
DOWNLOAD LINK ROM v1
Changelog v1:
1) Stock de-odexed & zipaligned based on 4.2.2
2) Removed all bloatwares which includes Xolo specific apps,google +, clock,taalk,themes,stock keyboard ,music etc
3)Added Xperia mod keyboard,inverted playstore,sms and calendar app.
4)Bravia mod is attached although i didnt see much difference
5)Viper audio added and works smooth.
6)Native Kitkat apps like google now,search and laucher added.
7)Font change to incorporate the new kitkat roboto
8)Included ES file explorer
Do not install the hangout from playstore as it may crash since the framework is updated to support 4.4.I will post the updated hangout app for leaked 4.4
How to install
1) Root your phone as mentioned above and have CWM installed
2) Copy the rom in \sdcard and then clear/wipe data cache and dalvik cache. Format system also
3) Go to mounts and storage and ensure to see /system is mounted (unmount system is what we want to see on cwm menu)
4) Select install from sdcard and navigate through the zip and install it.
First boot may take some time to install and thats it the rom is up.
Enjoy and share your experience to make this development ongoing
Please hit thanks if you like the work....
Click to expand...
Click to collapse
Screen shorts please...
NO ONE IS PERFECT
Downloading the ROM... will install on my A500S and reply with my views on it...
How much RAM u get free?
Is battery performance improved?
How come in 1screenshot, color of clock is yellow n in others, its BLUE?
The free ram is around 200mb
The status bar is white in color
The Battery backup On an average Use is around 1 day.
Sent from my A500s using xda app-developers app
vishalgunthey said:
The free ram is around 200mb
The status bar is white in color
The Battery backup On an average Use is around 1 day.
Sent from my A500s using xda app-developers app
Click to expand...
Click to collapse
Downloaded the Rom..
>Nice UI
>Xperia keyboard is better den stock one
>File manager is removed.
>Installed Apps (Super SU, ES File explorer, Facebook r not updated to latest version)
>Phone is smoother (due to deodexing/ZIPaligning i think)
>Not many extra tweaks / Vanila OS
> Play store is different. I think it may be of kitkat / or it may be modded.
In settings / display, theme is not working (FC)
iamnimit said:
Downloaded the Rom..
>Nice UI
>Xperia keyboard is better den stock one
>File manager is removed.
>Installed Apps (Super SU, ES File explorer, Facebook r not updated to latest version)
>Phone is smoother (due to deodexing/ZIPaligning i think)
>Not many extra tweaks / Vanila OS
> Play store is different. I think it may be of kitkat / or it may be modded.
In settings / display, theme is not working (FC)
Click to expand...
Click to collapse
Thank you for testing it out..
I have noted all those items and will try to incorporate with additional kernel tweaks in next version...:victory:
screenshots for recovery????
Related
First of all I must say thanks to all those people who's research helped me made my first Custom ROM Based on LG v20g and wanted to share it
ciaox
andy572
doktornotor
stormpack
janitux
tkirton
Thank you all
ROM FEATURES
_____________________________________________________________
ROM Name [email protected]_2.3.3_v2
New Changes in v2
Now Overclock your Stock ROM with franco.Kernel |.v1-PRE.RELEASE2| 2.6.35.10
Now Supports EXT4 but I would suggest using EXT2
Custom boot animation allowed and added android eats apple
Patched Lib SQLite 3 for Better IO speed
HEAP size set to 40
CM7 DSP manager added
stagefright player-disabled
added new tones
app2sd variation included (look in the download section-the first boot will take some time....so dn't be in rush )
Some apps and widget are removed(Can be installed by Flashing the zip file in the download section-This apps will be installed in data/app so that you can uninstall them later.)
Code:
AnalogClockWidget
BookmarksWidget
CalendarWidget
ClockWeatherWidget
ConnectionManagerWidget
DigitalAlarmWidget
DualClockWidget
Facebook
GenieWidget
Gmail
Maps
MemoWidget
MessageWidget
PhotoWidget
thinkdroid
Twitter
VoiceSearch
YouTube
OI File manager added
Rooted
BusyBox installed
Added /etc/init.d scripts support
No Apps2SD (Apps to EXT) To get that Try flashing Darktremor App2SD Make sure your EXT partition is EXT2,
EXT3-is not tested and EXT4 is not supported
to change the ext partition easily chk here
Bash shell support
/system/framework is deodexed
/system/app is deodexed
LG launcher
LG STOCK Keyboard
Zip Aligned apk
flashable with ClockWorkMod and amonRA....
HOW to Flash the ROM [email protected]_2.3.3_v2
_____________________________________________________________
Attention This can only be done in Windows PC
Download all of the file in the download section
Extract Romania V20G.zip to any folder
First connect your Phone through USB(Make sure you have all the USB Driver Installed)
Disable LG Virtual modem in the device manager reminded by Lawful123
Then open LGMDP THUNDER v1.5 (To download it look at the Download section and put it in a folder)
Click on Select Port
check your Phone and click on connect (If it doesn't Show your Phone then Go to Setting > application > development > and check USB Debugging )
Choose your Image Folder(Extracted Romania V20G folder) and all other file will be added automatically
Then un-check Recovery Image If you have CWM recovery (the recovery img in Romania V20G is CWM 3.1.0.0 recovery )
After That you will see a drop-down menu where the default value is None, Select Erase EFS APPS and click ok on the pop up.
Now click on start.......Wait LGMDP will backup your nv2 file(nv2-file includes e.g. you IMEI or MAC-Address..so your phone will not work without this !!! )
after that It will put your phone to emergency mode wait.....till LGMDP finds your phone and start the installing process.
Now Take a cup of Coffee and enjoy till its done
Then It will reboot your phone(if it doesn't reboot automatically then just press the power button) and restore the backed up NV2 file automatically(Do not I mean Do not Cancel this process or your phone will be bricked )
It will reboot(if it doesn't reboot automatically then just press the power button) after the NV2 file restoration is completed.
and your Done with LGMDP!!!!!
Now let the phone start up and configure if you want.
After this stage you can use the official v20G without any customization or root.
If you want Root and other posted features then Switch Off your phone and enter to the recovery and follow the below steps(hold down Home+vol dwn button and press and hold power button until you see the CWM recovery)
Flashing [email protected]_2.3.3_v2 via CWM Recovery....Process
[*]Enter into recovery
[*]and wipe all(wipe data/factory reset)
[*]wipe cache
[*]select mount-storage and format system
[*]install zip from sd card
[*]and flash [email protected]_2.3.3_v2.zip
[*]and enjoy!!!!!!
How to change ROM Easily
Answer is Mik's new-baseband-patch
In past if you wanted to install any Custom ROM after you flashed official 2.3.3, you had to use KDZ tool to go back to Official 2.2 to get the network working.
but now you can easily flash any custom ROM by recovery. and if you do not see network(as you won't) then flash new-baseband-patch and bingo now you have signal....
BTW If you face any GSM or DATA related Issue after flashing this patch then report this to mik not me........
Download Section
_____________________________________________________________
[email protected]_2.3.3_v2(MD5-3EA4E4584105D812B97F7D95A9877C7B)
[email protected]_2.3.3_v2_a2sd(MD5-4C0C208C4E3307332A6B7685A0CE397D)
Romania V20G(MD5-F6887E28209C595CFAF4C1A2B7478CA9)(Multiupload link will be added later)
LGMDP-v1.5.exe
Removed apps for [email protected]_2.3.3_v2.rar
Power Menu MOD with Circular Battery MOD (thanks to PaoloM70 and doktornotor )
Mik's new-baseband-patch
[email protected]_2.3.3_v1.2(MD5 hash-571B9C20C6B3A83634F3C0DDDF368F38
Help and Suggestion will be appreciated
Thank you
Good for you
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.
Lawful123 said:
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.
Click to expand...
Click to collapse
Thanks for your suggestion but I never disabled it. but I will include in the instruction for safe keeping.
downloading now 1 request plz can u make some themes or themes chooser for ur cfw it will be more awosome
can i use INTERACTIVE DATA2SD with this rom
So what's different from doktornotors version. And is this flashable via Sd card
Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?
han-shinbi said:
Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?
Click to expand...
Click to collapse
It is already written here? "My" ROM is a stock rooted LG v20g with a2sd, no other changes done.
This may sound stupid but why can't you just flash the ROM why all these steps also can you add any other mods after you flash the rom??? Like franco tweaks or ungazes data2sd????
Sent from my LG-P500 using XDA Premium App
This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself
dislplin01 said:
This may sound stupid but why can't you just flash the ROM why all these steps
Click to expand...
Click to collapse
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
...or otherwise your phone won't start like in my case
doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
I didn't see it above and have not looked at your roms thread thank you for the answer
Sent from my LG-P500 using XDA Premium App
dark-k said:
This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself
Click to expand...
Click to collapse
It's theme. Use Nt-sense CM7 theme.
Sent from my LG-P500 using XDA Premium App
for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....
mujju85 said:
can i use INTERACTIVE DATA2SD with this rom
Click to expand...
Click to collapse
i think u can use it but i havnt tested it.try using EXT2 partition.
untitledmangxg said:
for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....
Click to expand...
Click to collapse
try installing this rom by following the guide given in the 1st post.
i have done all steps like in first post....it was fault of interactive data2sd...dont install.....
untitledmangxg said:
i have done all steps like in first post....it was fault of interactive data2sd...dont install.....
Click to expand...
Click to collapse
Then its better to stick to a2sd. Later I will test d2sd and let you guys know if it works.
BTW I am using EXT2 Partition.
@cyber_avijit:
Do you want a private howto on adding powermenu? I'll give you one if u want.
Hi Guys! I finally can release my first customized themed ROM from SP3DV build! This is my daily use ROM and think it is so good to share it.
I'd prefer to shared the NANDROID (backup restore) but maybe upload the usual installing .zip file in next days. The major advantages of this rom is that it can boot with SD CARD inserted (It work for me and hope to work with any SD CARD type). Also use an app (tasker) that prevents rebooting after any missed call.
FEATURES:
- Based on CyanogenMod 7.1 Android 2.3.7
- This is a MOTO BLUR themed rom. (I don't use the BLURHOME launcher becouse it is so heavy for X1. Instead I use a blur theme for Great GO LAUNCHER EX)
- Changed Bootanimation with a 3D CYANOGENMOD7.
- JAVA enabled (For installing .jar files).
- New WALLPAPERS.
- 3 new AOSP themes Added (MOTOBLUR, ANASTASDROID, ROVER BLACK).
- Customized framework-res.apk.
- US text-to-speech (tts) Added.
- Changed the default FONT with the CHINT font.
- used the last Zargloub's kernel (gf111062 - 28.2.2012).
- CPU Max and Min frequency customized (128~614MHZ).
ADDED:
- Go launcher ex with BLUR theme, Go locker, Go locker themes, Go taskmanager, Go weather.
- Gauge battery widget.
- X-plore.
- Smart keyboard pro.
- Multitasking pro (With long press of home key it appears).
- Ucbrowser and Ucxunlei (a great chinese downloading app).
- Audio effect.
- TASKER (A good replacement of chinese Newding) [Great Thanks to BORKISHA and other guys that introduce it].
REMOVED:
- Stoke Android Keyboard.
- Old CMWALLPAPERS.
- CM7 old themes.
- Newding
BUGS:
THIS ROM IS UNROOT! So there are some bugs like wifi problems!
IF YOU DONT HAVE THE CLOCKWORKMOD recovery flashed to your XPERIA X1, please see the link blow till flashing CLOCKWORKMOD recovery. [thanks to Kerfooly]
http://forum.xda-developers.com/showthread.php?t=1329379
HOW TO INSTALL:
1- Download the .7z file from the provided link.
2- Extract it and put the folder clockworkmod in the root of your SD CARD.
3- Reboot in recovery and choose backup and restore.
4- select restore.
5- select the date-time provided. then select yes-restore.
6- reboot and enjoy without need to eject your SD CARD when booting!
7- After that ANDROID boots, launch the TASKER app and select your ringtone and SMS notification from your SD CARD!
Special Thanks to:
- SP3DEV
- Sun Dream
- Kerfooly
- Zargloub
- jerrytan93
Download link:
*** Link removed due to unlicensed paid software included in this release ***
-DM
IMPORTANT NOTE:
There are not something special in that build! just can find a way to prevent SD CARD checking while boot! I find that if the build be unroot it can't stuck while boot! I try 4zroot for unroot but it can't reroot! When the build be unroot some bugs appear! If the unroot-reroot problem solves, can say that the SD CARD problem finally can be solved!
first one unbelivable it really works with sdcard inserted nice job attisa!!!!
my simcard can't get detected with this rom
wow...really this build can used daily ??
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
mahmoodifar said:
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
Click to expand...
Click to collapse
I'd post the installer .zip file in some next days! But for now you can modify the TASKER app to use your ringtone! because this app use the SD CARD ringtones to prevent reboot when phone rings!
Elibl said:
first one unbelivable it really works with sdcard inserted nice job attiso!!!!
my simcard can't get detected with this rom
Click to expand...
Click to collapse
I have no idea why your simcard can't detected. Did you try reboot or replacing the simcard?! I think you do it! Hope that the .zip file don't have this problem!
Hi, thanks for this. I've just installed it. Whats wrong with wifi? its showing an "error" message and its not finding any network. Also, are GAPPS included ?
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
mahmoodifar said:
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
Click to expand...
Click to collapse
The simplest way is that use 4zroot.apk for unroot-reroot the device!
attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
thanks a lot! and what's the reason for the boot problem? do you know it?
attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
So, just load it up, click unroot then reboot, then run again and chose reroot?
for me it gives force closes and system is totally messed after unroot and i'm not able to reroot...
but boot works with sdcard inserted...
Just like me
Wifi doesn't work anymore
what kind of crap you posted attisa didn't you tried it before?
but solution is near...
wifi is also messed up for me...
EDIT: oh ok i understand this is the mod you did to the rom but i prefer to remove sdcard than to have no su rights and no wifi
but pretty good the solution is near
you only should mentioned the problems more clearly and earlier...
I think all of these problems are as result of shell rooting
If there is a way to could full root the NAND roms, all problems will gone (missed call reboot, SDcard, wifi, ...)
If it ok I share tasker and it's settings
What are the Phone Offhook and Phone Idle ?
Sorry OP, but i have to close this. Next time, do not include paid software in your release..
AIO Boot Mod Made By Me For All Motorola Razr i
info with this boot youll get:-
Swap sdcard
Root at boot
init.d support
Hacked adb get it by typing adb root
Enable Mass Storage
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
here's v2 with this you get
Fixed dpi
Mass storage by default you can now change it in build.prop
IO file explorer
Speed improved mods in default.prop
12 hour clock
Busybox installed to system/xbin
Install non market apps set to 1
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
here's v3 with this you get
Flash Player
Install to sdcard enbled in settings
Fixed the app problem were some apps will not install
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
Download boot mod for 871.110.12012..Brasil.en.BR here
New Mods For Jelly Bean
Swapped sdcard "external is now mean sdcard"
Unlinked data/media "Full 6gb for data"
Flash player "only works in stock browser"
Installs busybox
Auto Rooter
Enabled 3g in Settings
Download v1 jelly bean
Orange UK JB Only
here
Retail.en.EU jelly bean only
here
Tomorrow I'll do the French jb ROM
Extra Info
I ADVICE YOU WITH V3 TO FACTORY RESET AS THIS WILL ENABLE ALL MOD EG
3G , Fixed dpi & Mass storage by default
How To Is Very Easy
Connect to pc and move the right zip for you make of motorola razr to your sdcard.
Reboot your motorola into recovery and flash.
Reboot.
Done.
DON'T FORGET TO HIT THE THANKS BUTTON
Thks, but not working for me (81.5.40002 EU).
Mass storage, MTP and PTP don't work at all and cause an error message "Processus storage stop".
And to finish the DPI change
is anyone else have problems with 81.5.40002 EU?
remember this eu version is for odex roms not deodex roms
if someone can uploaded the deodex settings.apk I can make for deodex and odex roms
you will need to add this line to build.prop
ro.sf.lcd_density=240
to fix dpi
Ok thks for the density!
But can you help me for the storage because I can't access to my internal and ext sdcard with my laptop .
I change the boot.img and the setting apk in your zip with root explorer and flash it again in CWM but nothing change..
Always "android.process.media" stop
PELLET Nolwenn said:
Ok thks for the density!
But can you help me for the storage because I can't access to my internal and ext sdcard with my laptop .
I change the boot.img and the setting apk in your zip with root explorer and flash it again in CWM but nothing change..
Always "android.process.media" stop
Click to expand...
Click to collapse
did you not backup your rom first
with root explorer do you see your sdcard at /sdcard
iv just tested the zip and it is working do you have both apk and odex in system/app
yes of course I I backup my rom
I see my sdcard yes, but when I connect my phone to the laptop I get the processus error message.
I'm odex, have you always my setting apk 81.5.40002 odex?
could you return to your backup and uploaded me both your settings.odex and settings.apk and I'll try to deodex it
That's great. thanks for share.
Here's my setting odex and apk files in zip.
View attachment 1563028
uploading eu zip with full settings apk im uploading now iv tested it and it is working fine now
edit:
now ready
rickwyatt said:
uploading eu zip with full settings apk im uploading now iv tested it and it is working fine now
edit:
now ready
Click to expand...
Click to collapse
Thanks for the boot... the SD swap works wonders but... is there a particular reason of why while windows detects a new usb storage unit... this appears as disabled?
Edit: Also if I try to go into settings -> storage android displays "settings has stopped"
I use this room:
http://www.droidrzr.com/index.php/topic/5465-rom-ambp-android-motorola-blur-project-release-2/
Attached is my settings apk... thanks in advance
im uploading ROM AMBP boot mod now
edit
now ready
rickwyatt said:
im uploading ROM AMBP boot mod now
edit
now ready
Click to expand...
Click to collapse
It still shows a grayed unit on my pc and cannot access the files, also if I go to storage in settings it force closes
Edit: I actually would be happy only with the sd swap option, tried the one in the other post but that force closes a lot of applications once applied, but the one contained in this version works wonders....
+¹ but thanks for looking after all the popular roms
We have the same problem with the razr M, do you think this can work if we flash it on that phone?
Thx
Sent from my XT907 using xda app-developers app
new update coming for uk motorola with this update you get
fixed dpi
mass storage by default you can now change it in build.prop
io file explorer
speed improved mods in default.prop
12 hour clock
busybox installed to system/xbin
install_non_market_apps set to 1
eu rom will come soon
arceles said:
It still shows a grayed unit on my pc and cannot access the files, also if I go to storage in settings it force closes
Edit: I actually would be happy only with the sd swap option, tried the one in the other post but that force closes a lot of applications once applied, but the one contained in this version works wonders....
Click to expand...
Click to collapse
I no why but I'll need your framework-res.apk to fix it
rickwyatt said:
I no why but I'll need your framework-res.apk to fix it
Click to expand...
Click to collapse
Here it is, and thank you for your hard work... (it still would be great if you got a separated version of exactly this mod that only swaps the sd card since that one always work for me but not the usb mount....)
Regards,
Updates are all ready
Android 4.4.3 - STOCK OS - DEBLOATED - 64bit
Hello everyone. Lets jump straight to the point. This here is a backup made with TWRP from the STOCK OS for the HTC Desire 510 64bit. The few plus sides are that is DEBLOATED and that it uses a kernel that has write protection removed. Just a side note: I am trying to make a flashable ZIP for this but I'm having issues. I always get boot loops. So for now this is your only option.
If you are familiar with TWRP and backups and all that stuff you can skip the next parts and download the ROM, If not, I advise you to read carefully the whole thread if you don't want to brick your device.
DOWNLOADs
Version 0.0.1 (STABLE) - https://mega.nz/#!nBJUDL7D!bmkQzsbywpbyJ7tzPybSRtYUG1LzsPNnv_M7wZr4PoA
Version 0.2.0 - DEODEXED - (BETA) - https://mega.nz/#!jApGjZDJ!zQoSmyaCSRBV6iBtQwEOR_mTYhzqYeFxhm5p1P-fk68
DISCLAIMER
I'm not responsible if you damage your device in any way!
What is changed?
Not much is changed.
Bellow are the app replacments I made:
1. Sense Home ---> NOVA Launcher
2. Sense Messages ---> Google Messages (Material Design)
3. Sense Calculator ---> Xlythe Calculator (Material Design)
4. Sense Calendar ---> Google Calendar (Material Design)
5. Sense Clock ---> Google Clock (Material Design)
6. Sense File Manager ---> ES File Explorer
7. Sense Weather ---> AccuWeather
4. Sense Keyboard ---> Google Keyboard
I removed a lot of HTCs and Google’s useless apps and other things, that are taking up space and resources.
From Google apps you have left:
1. Google Play Store
2. Google Chrome
3. Google Play Games
4. Google Drive
4. YouTube
5. All other background apps and services that are required for the Google apps to function properly.
From HTC apps you have left:
1. Camera app
2. FM Radio
3. Gallery (I couldn't find a decent replacement)
4. Music
5. Photo Editor
6. LockScreen
I have removed the HTC Browser, Zoe, E-mail and other useless stuff from HTC.
I have included:
1. Clean Master Lite - It's much faster than the full blown app and gets the job done. Lots of people hate it but it works like a charm on this device.
2. DiskInfo - With this little app you can see all of the partitions on your device. Regardless if you are S-ON or S-OFF.
3. Glim Lite - A set of beautiful Material design icons for NOVA launcher.
I didn't include an E-mail app because the Play Store is full of them and I couldn't choose. This choice is up to you.
How to install it?
First of all you need an unlocked bootloader with a TWRP - custom recovery installed on your device.
To unlock your bootloader go here http://forum.xda-developers.com/desire-510/development/bootloader-unlock-htc-desire-510-t2910233. Follow that tutorial to get your bootloader unlocked. After a successful unlocking you'll need a custom recovery.
Download this file: https://dl.twrp.me/a11ul/twrp-3.0.2-0-a11ul.img. This is the latest TWRP recovery for our device. Now we need to flash this file on the device:
Before starting put the contents of the ZIP file on to your SD card. And make sure that it has this folder structure:
Code:
--SD CARD
--TWRP
--BACKUPS
--Your device serial number (The name of this folder should be the serial number of your device otherwise TWRP won't see the backups in this folder)
--2016-04-17--13-49-21_KTU84L_release-keys (Don't change this, I don't know what will happen if you do)
1. Power off your device by pulling the battery out and putting it in again.
2. Press the Volume Down and Power Buttons until you see the HBOOT screen.
3. Press the Power button again to enter Fastboot mode.
4. Connect your phone with your PC using an USB cable.
5. Now open your terminal (I'm using Ubuntu but it's same in Windows as well) and type:
Code:
fastboot devices
This will show you an output like this:
Code:
--your devices serial number-- fastboot
If it doesn't show you an output like that then you probably didn't install the drivers correctly or you have a faulty USB cable.
If your output is the same as above than we can move on.
This command will flash the TWRP recovery on your device:
Code:
fastboot flash recovery /full/path/to/the/recovery.img
Example:
Code:
fastboot flash recovery /home/denny/Downloads/twrp-3.0.2-0-a11ul.img
Now you have TWRP on your device.
To boot TWRP press the Power button to go back to the HBOOT screen and navigate to the RECOVERY option with the volume keys and again press the Power button. After a few seconds you'll see your new recovery.
Restoring the backup
First we need to wipe any potential data that will cause conflicts with the new system.
1. Tap on "Wipe"
2. Tap on "Advanced Wipe"
3. Select all but leave the Micro SDCard option unchecked.
4. Swipe the slider to wipe the data.
After that is complete press on the house button on the lower end of the screen.
Now we are going to restore the backup:
1. Tap on the "Restore" button.
2. At the lower left corner tap on "Select Storage" button.
3. Choose "Micro SDCard" option and press OK.
4. Now you should see the backup folder. Open it.
5. Select "Boot" and "System" and swipe to start the restoring process.
6. Press "Reboot System" after the restoring has finished.
After you setup you system apply the Glim Lite icon pack to NOVA launcher.
Bellow are some screenshots of the new look.
Big thanks to:
@wolfaas12345 - for providing a tutorial on how to unlock your bootloader.
@rbheromax - for making a kernel with write protection removed.
@patrik.KT - for developing the TWRP recovery for our device.
If you are having any trouble ask a question on this thread or send me a private message.
XDA:DevDB Information
DeSense, ROM for the HTC Desire 510
Contributors
denny.hell
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: None
Based On: Stock Sense 6.0 / 1.51.401.7
Version Information
Status: Stable
Created 2016-08-13
Last Updated 2018-03-23
BETA testers for OTA updates
I have managed to enable a function for our ROM to receive OTA updates directly from me. This will make updates more easy to be deployed and cuts down the time for me to upload the whole ROM and for you to download it and flash it. Be advised that this is for testing purposes only (for now). I don't know how much stable the ROM will be after receiving an update.
By flashing the ZIP file below you acknowledge that you are wiling to become a BETA tester and that you do this at your own risk.
Step 1.
You need to download the ZIP file below this post and flash it like any normal flashable ZIP.
The ZIP file contains a new app for OTA Updates, a new lib file for proper functioning of the app and an edited build.prop file. The build.prop file contains information to tell the app where to check if new updates are available, so please do not edit it yourself.
The app will say that there are no updates. That is not a bug, error or a glitch. Currently there are no updates. When an update is deployed the app will send you a notification.
Step 2.
Send an email to [email protected] to confirm that you have downloaded and flashed the ZIP file and that you are willing to be a BETA tester. Please use a valid email because I will be contacting you to share feedback about the new updates and discuss any issues you might have.
Reserved
Thanks a lot for the sharing!
I will definitely test it
BTW you say that you have problem - bootloop with the .zip, did you tried to flash boot.img manually after flashing of the .zip?
Also instead of gallery I use simply photos by google
Or there is also lightweight Gallery app by google (com.android.gallery3d). You will probably find it in GAPPS
Benik3 said:
BTW you say that you have problem - bootloop with the .zip, did you tried to flash boot.img manually after flashing of the .zip?
Also instead of gallery I use simply photos by google
Or there is also lightweight Gallery app by google (com.android.gallery3d). You will probably find it in GAPPS
Click to expand...
Click to collapse
Thanks for those tips. I will definitely take a look at the lightweight gallery.
I tried flashing the boot.img manually but nothing. I've got it to boot up just once but there was no wi-fi. That leads me to belive that the permissions in the updater-script are not set up properly but also could be something else. If you have experience with updater-script do you think that you could help me out?
Unfortunately I don't have any bigger experiences with updater-script
Few times I edited it, but never so big one like installing ROM...
Anyway can you sand me the zip? I will try to look, but I don't promise anything
hi,
thanks so much for this Debloate.:good:
Well done developer! Phone itself is 10x faster without the bloatware apps on! Thank you so much developer!
Thanks a lot for your sharing. I finally have a nice going device. Its the best solution currently for this phone.
Hello mates i have an question
This version has fix that permision for sd card ?
Sent from my HTC Desire 510 using XDA-Developers mobile app
4. Now you should see the backup folder. Open it.
I do not see anywhere
what to do with the zip file that I downloaded from the above link
My bad, I did not read everything you've written
myke_angell said:
Hello mates i have an question
This version has fix that permision for sd card ?
Click to expand...
Click to collapse
Yes...I don't have any trouble with my SD card
Moki1 said:
4. Now you should see the backup folder. Open it.
I do not see anywhere
what to do with the zip file that I downloaded from the above link
My bad, I did not read everything you've written
Click to expand...
Click to collapse
No problem, if you have any further problems don't hesitate to ask
would be nice to have HTC Sense UI and email app left and htc foto editor and gallery removed and replaced by Google Photos, I don't understand why stick to ES File Explorer which does have in app ads rather have native file explorer, also I don't understand why I need that clean tool when android is managing ram just fine in this version.
Sorry if that sound rude, language barrier
Keep up with good work.
X-77 said:
would be nice to have HTC Sense UI left and email app and htc foto editor and gallery removed and replaced by Google Photos, I don't understand why stick to ES File Explorer which does have in app ads rather have native file explorer, also I don't understand why I need that clean tool when android is managing ram just fine in this version.
Sorry if that sound rude, language barrier
Keep up with good work.
Click to expand...
Click to collapse
No problem, any feedback is more than welcome. The Sense UI will remain, the theming I'm gonna make will only be on the icons and maybe the QuickSettings layout of the buttons, nothing too big to ruin the Sense feel. I might get back the e-mail app if I can't find a descent replacement for it. In the next update the HTC Gallery, alongside the Photo Editor will be replaced by Google Photos. Also the ES File Explorer, I'm gonna replace it with something that is adds free, simple to use but versatile. The Clean tool is not much for RAM as it is for Junk removal. Here is an example: Yesterday I was listening to some music on YouTube for about two hours. After that, I run the Junk Removal tool....It removed somewhere around 900Mb of useless data. You see how you can free up some space with it. I plan to keep it, but If I get negative feedback about it I will remove it.
Again thank you for your feedback.
E.g. Total Commander is simple and nice explorer without adds
BTW now when you have root, you can install "adblocker" app
deodex is not good for this device beacuse have small memory and charge it useless, odex files have sufficient space in system.
my oppinion
lucyr03 said:
deodex is not good for this device beacuse have small memory and charge it useless, odex files have sufficient space in system.
my oppinion
Click to expand...
Click to collapse
Thank you for your opinion. The main reason that I deodexed the ROM is to save up on the size of the actual download. I'm currently running the deodexed version on my phone and it works just fine. But still it will remain in BETA version unless I get positiv feedback about it.
Guys, I recall what I said, don't listen to me I'm a noob
HI !
For those who want their Axon7 G stock (rooted & unlocked) to be fully (almost) stripped of bloatware or other unwanted apps, I uploaded my SLIM ROM (ad-free + SuperSU). Nothing fancy, just cleaned and ready to use.
It’s fully functional and tested for some time now. Smooth, no bugs.
From this basic, almost clean version you can simply add from scratch your favorite browser, keyboard or other stuff without being messed up with unnecessary (double) applications. Some basic apps like the file manager, calender and alarm are replaced (see info) because standard in-builts are not that great
AdAway + SuperSu added.
I hope you’ll E N J O Y !!!
Based on :
A2017G Nougat B05 “Spain” stock ROM : 5.02GB extracted
Stripped my A2017G_N_B05_stocksystem_by_raystef66 to SLIM version : 3.89GB extracted
INSTALL : ( TWRP )
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache, dalvik, data and system
3. Install : A2017G-N-B05-bootstack : https://www.androidfilehost.com/?fid=889764386195912453
4. Install : A2017G-N-B05-slim : https://www.androidfilehost.com/?fid=889764386195923534
5. Reboot
6. Done ! No more no less :cyclops:
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into ES File Explorer/settings/check ROOT/tab ROOT again and give R/W to ALL. DONE!
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
Touchpal (+languages)
Zte clock replaced by Google Clock
Zte calendar replaced by Google Calendar
ZTe File mananger replaced by ES File Explorer (imo a very good ROOT file manager)
….......
Baked into :
SuperSU
AdAway
Es File Explorer (root access)
Google Calender
Google Clock
Minor Modifications :
Boot :
Init.d enabled
Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
Improved performance
Lockscreen rotation
Faster boot
Phone rings immediately
Wifi scan interval 180sec
Better call voice quality
Better network signal
Added sounds LOS
The only apps left on homescreen : see attachments
Contributors :
myself
ROM OS Version : 7.1.1 Nougat
Source : ZTE stock-rom A2017GV1.2.0B05 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=889764386195912222
Kernel : stock
Version Information :
Status : Stable
Created : 2017-08-17
Excellent. Thank you for your contribution!
Can I update to this if I'm on 6.0.1 build GV1.0.0B10?
Can u use magisk? Dont like Supersu..
This is getting really close to my ideal rom, I like LOS but not prepared to lose daydream, camera and audio performance.
Is it possible to do a rom like the old google play edition phones, where you get all the stock features and keep zte camera app but get googles dialer, pixel launcher etc...?
bungie240 said:
Can I update to this if I'm on 6.0.1 build GV1.0.0B10?
Click to expand...
Click to collapse
If you're rooted unlocked you can. But to be sure update to B01 and B02 bootstack/stocksystem. If you prefer update to B05 bootstack/stocksystem and then flash this one. Follow guides : https://forum.xda-developers.com/axon-7/development/stock-rom-a2017g-twrp-flashable-images-t3599069
Use : https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
jw1985 said:
Can u use magisk? Dont like Supersu..
Click to expand...
Click to collapse
I already worked with Magisk and everyone has it's preference.
If you like to convert it,replace SuperSu with Magisk in ROM, rewrite the updater-script and repack again. Flash and done !
sirizak said:
This is getting really close to my ideal rom, I like LOS but not prepared to lose daydream, camera and audio performance.
Is it possible to do a rom like the old google play edition phones, where you get all the stock features and keep zte camera app but get googles dialer, pixel launcher etc...?
Click to expand...
Click to collapse
Everything is possible but everyone has it's own preferences. An ideal ROM doesn't exist. That's why i made this one to build it further with your needs.
jw1985 said:
Can u use magisk? Dont like Supersu..
Click to expand...
Click to collapse
https://forum.xda-developers.com/axon-7/how-to/replacing-supersu-magisksu-a2017g-t3614024
RR 5.8.3
Hello,
Can I install this ROM directly from Ressurrection Remix 5.8.3?
jw1985 said:
Can u use magisk? Dont like Supersu..
Click to expand...
Click to collapse
EASY METHOD ( instead of me uploading another version again ) :
For those who want to replace SuperSU with the latest Magiskv13.3 (stable) :
1. Download latest here (http://tiny.cc/latestmagisk) and put it on ext.SD
2. go into SuperSU app (#) and scroll down to 'Fully Unroot'
3. Tab it and tab YES when asking to replace boot.img
4. As soon as it starts to run and you get a first black screen : hold VOL+ and Power as to go into TWRP (so don't let it boot normaly, just go into TWRP !)
5. once in TWRP flash Magiskv13.3
6. Done !
I tested it by installing a module and no problem so far...
Can someone upload me the build.prop? I messed my up :/
Spillunke said:
Can someone upload me the build.prop? I messed my up :/
Click to expand...
Click to collapse
Here you go
https://www.androidfilehost.com/?fid=889764386195923891
Can i delete systemapps directly or is the disemmcwp command also needed with this rom?
I cant get access to system with "stock stock" Rom :/
Spillunke said:
Can i delete systemapps directly or is the disemmcwp command also needed with this rom?
I cant get access to system with "stock stock" Rom :/
Click to expand...
Click to collapse
Yes you can delete system/app/whatever with es file explorer. I did the test.
Just give ES root permission.
You don't need disemmcpwp command or whatever to delete something in root of phone.
Edit : in my experience SuperSU is more reliable than Magisk as it comes to altering system stuff. Supersu does it flawless as Magisk in some way has difficulties with root explorers. That's my opinion
Thank you for removing this ZTE Apps and replacing with original Google Apps !!!
How about the battery life? Can anyone post prints?
Thanks
raystef66 said:
Yes you can delete system/app/whatever with es file explorer. I did the test.
Just give ES root permission.
You don't need disemmcpwp command or whatever to delete something in root of phone.
Edit : in my experience SuperSU is more reliable than Magisk as it comes to altering system stuff. Supersu does it flawless as Magisk in some way has difficulties with root explorers. That's my opinion
Click to expand...
Click to collapse
With Magisk there is a problem when deleting folders.
But editing and deleting single files is working fine.
Just a hint from my experiences.
SilentEYE said:
With Magisk there is a problem when deleting folders.
But editing and deleting single files is working fine.
Just a hint from my experiences.
Click to expand...
Click to collapse
Same for me, rename files works, delete not. 'Read-only file system' notification.
I "must" use Magisk because of Xposed. Maybe it would work with SuperSU, but i deleted some apps in the zip before, so i cleaned it myself before flashing.
What about adding some nice mods?
- Extended Power Menu (this version: click)
- Center Clock in Statusbar
- "conservative" war mod
(Thats what i added to your ROM)
I would like to help you, but i dont know how.
SilentEYE said:
With Magisk there is a problem when deleting folders.
But editing and deleting single files is working fine.
Just a hint from my experiences.
Click to expand...
Click to collapse
Spillunke said:
Same for me, rename files works, delete not. 'Read-only file system' notification.
I "must" use Magisk because of Xposed. Maybe it would work with SuperSU, but i deleted some apps in the zip before, so i cleaned it myself before flashing.
What about adding some nice mods?
- Extended Power Menu (this version: click)
- Center Clock in Statusbar
- "conservative" war mod
(Thats what i added to your ROM)
I would like to help you, but i dont know how.
Click to expand...
Click to collapse
That's why i made this STOCK B05 clean ánd with the SuperSU. As you both acknowledge, with SuperSU there are no problems at all to modify, delete, ..or whatever in root's phone. Magisk doesn't it for a full 100% as SuperSU does. On the contrary when you want the benefits of Magisk which SuperSU does not quit offer, flash Magisk in a minute and you're done. So people can choose to their benefit
Adding mods like you propose are more then OK but this would mean it's not that STOCK anymore you know. I can add these mods but it will be another ROM. So in general, everyone has its own wishes but as said, i just uploaded this one as it is as far as i know the 'cleanest' one.
Hi, thanks for this Rom, but i'm not able to flash magisk. When uninstall supersu inside the supersu app, i cannot restore stock boot.img.
skaterazn said:
Hi, thanks for this Rom, but i'm not able to flash magisk. When uninstall supersu inside the supersu app, i cannot restore stock boot.img.
Click to expand...
Click to collapse
You're welcome
Normally when you follow my procedure here it should/would work. I've done it a couple of times to test. You'll have to vol+/power immediately after when it wants to reboot on a black screen, hold both buttons till ZTE logo pups-up and then release. Enther in TWRP and flash Magiskv13.3.
Should work