[q] rom dirt - Galaxy S I9000 Q&A, Help & Troubleshooting

How to make usb to charge mode only ? This rom
http://forum.xda-developers.com/showthread.php?t=2482019
Someone ?

AmirAnwar said:
How to make usb to charge mode only ? This rom
http://forum.xda-developers.com/showthread.php?t=2482019
Someone ?
Click to expand...
Click to collapse
you need to be clearer about what you mean by USB charge mode only with regards to that ROM
Check this out! You , YES! you are an " Android ". Not your phone but U.​

I mean how to change mass storage to charge mode only.
Sent from my GT-I9000 using xda app-developers app

AmirAnwar said:
I mean how to change mass storage to charge mode only.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Phones are always on charge mode ( meaning when you connect to PC or charger it will only charge, to enter mass storage you need to click USB storage mode that is the normal situation in Samsung phones, does your works differently? or is it only happening on that ROM?
Check this out! You , YES! you are an " Android ". Not your phone but U.​

AmirAnwar said:
I mean how to change mass storage to charge mode only.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I know how to do it before. Go to settings>storage>menu>usb computer connection . Other rom work but this rom not work
Sent from my GT-I9000 using xda app-developers app

AmirAnwar said:
I know how to do it before. Go to settings>storage>menu>usb computer connection . Other rom work but this rom not work
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
try to do a full wipe ( everything) and re install that ROM again, if still the same, it may be bug in that ROM, but you need to be sure as no one has made bug report about it so far in that thread, and you should post there but i will post this link there for you, since you do not have enough post yet, only after you are sure you had installed properly.
EDIT: link your post on that ROM thread so read there too
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
try to do a full wipe ( everything) and re install that ROM again, if still the same, it may be bug in that ROM, but you need to be sure as no one has made bug report about it so far in that thread, and you should post there but i will post this link there for you, since you do not have enough post yet, only after you are sure you had installed properly.
EDIT: link your post on that ROM thread so read there too
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
Oh, okay. Thanks
Sent from my GT-I9000 using xda app-developers app

@xsenman
i'm on the Dirty Unicorn now..
1. on ROM Control -- General UI -- Vibrate on expand, when i uncheck that one, the UI restarts and Force Close again.so i check it again and reboot my phone and it came back to normal again.
2. the back bottom seems not respond always so i need to press the menu button to make back button works again.
3. sometimes the ROM is so slow, looks like a matrix.. sometimes its so fast..
4. charging time is slow, sometimes i need atleast 6hours just to full charge my phone from 10% to 100%. is this normal? but i like its battery usage thou. its excellent low battery consumption. my problem only that its slow in charging.
5. some of my games force close, sometimes hangs up. but after 3-6 tries of opening that game, its playable again.
6. can't install Titanium Backup Pro 6. "Out of Space". when i click on "Manage Apps", i still have 606MB free, so how to fix these?
on Settings -- Partition Info --
/system -- 402MB / 591MB
/data -- 7044MB / 1.26GB
/cache -- 2.30MB / 17.50MB
/sdcard (FAT) -- 4.83GB / 5.64GB
/sd-ext (EXT) -- Unavailable
but i could install other games bigger than the TB Pro 6. i could not revert back to my old TB Pro v4.8, i could not install it either.
7. adding account like Google or Facebook, i sometimes encounter FC's.
will updating the gapps help some of these problems?
please help...
MABUHAY ang PILIPINAS :good:
---------- Post added at 04:31 AM ---------- Previous post was at 04:07 AM ----------
[/COLOR @xsenman
btw sir, i did fresh install 3 times already but still problems persist on these rom..
i sometimes clear the cache on TWRP mode...
still the problem is there..
i really loved these rom..
it has great battery life and nice Interface..
ohh, i forgot, the screenshots also has some problems
"Couldn't capture Screenshot"
Couldn't save screenshot. Storage may be in use.
anyhow to fix these?
please help... thanks
MABUHAY ang PILIPINAS

microboi_android said:
@xsenman i'm on the Dirty Unicorn now..
Click to expand...
Click to collapse
Have transferred your query to ROM developers thread so monitor that thread http://forum.xda-developers.com/showthread.php?p=46962054#post46962054 and also you must read all the posts in that thread for solutions, after your 10 post limitations are over you can post directly on that thread
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Related

what is this new battery manager?

Hey guys i am using clean note v4.0 (4.0.4 lrk ) which is based on stock rom and no additional mods or nothing so this feature i am asking about should be stock too. Okay so when i went into my default stock task manager which comes with touchwiz I did my usual exit all apps and clear memory but then when i went into storage i saw two new options at the bottom and new battery section under storage in task manager. It had two options start monitoring and stop monitoring. Well i just wanna point out one more new feature in this 4.0.4 update but posted it in Q&A section as i really dont know what it actually does and how to see what it does, i mean from to see what is it monitoring and all? also it shows something in notifications bar when clicked on start battery monitoring! Below are two screenshots of it.
Okay guys more intel on this, i found two files related to this(atleast thats what i think so) named as batt_xxxxxx and cpu_xxxxxx in the internal sd card having some info and some techie stuff as i dunno what exactly it was. I would have uploaded it but it had the usage info and everything so i didnt upload it.
Thanks for your time guys.
im on the same rom right now , i just flashed the theme mod over it, i dont have those options
Its cleary written near the button "for devs"
Sent from my GT-N7000 using xda premium
I'm on Stock 4.0.4 and have this option;
Never used it as not a dev..
ali_khalid5518 said:
Its cleary written near the button "for devs"
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
CJSlim79 said:
I'm on Stock 4.0.4 and have this option;
Never used it as not a dev..
Click to expand...
Click to collapse
Yep guys i know about it but do you think people here at xda would find something new and wont be curious about it ....
Actually just wanted to know about it......but its alright.
I assume it will create log files for analysis which can be used in the development of new apps / ROM's etc
CJSlim79 said:
I assume it will create log files for analysis which can be used in the development of new apps / ROM's etc
Click to expand...
Click to collapse
Thanks!!!.....finally figured out.

DriodAce v2

Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
cht5 said:
Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
Click to expand...
Click to collapse
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Profiles?
did you wiped before flashing?
SMillerNL said:
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yeap .. Did that ..
Neo-Mike said:
Profiles?
Click to expand...
Click to collapse
I did set the profile with correct setting . i think :crying:
incredible.Zimbo said:
did you wiped before flashing?
Click to expand...
Click to collapse
Yeap .. did that !!! :crying:
cht5 said:
Yeap .. Did that ..
I did set the profile with correct setting . i think :crying:
Yeap .. did that !!! :crying:
Click to expand...
Click to collapse
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
I dun have this problem, in fact it auto turn it ON when finished flashed ..
Darkcloud4491 said:
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
Click to expand...
Click to collapse
Yeah .. checked .. ..
Anyway .. I did a re-flashed again .. yesterday .. and now it WORKED ...:silly: .. and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Hi,
One thing you should always try is reflashing the rom after turning completely off the phone. Most of the problems related to features missing are related with problems flashing or data left on the device and sometimes (do not know why) when just rebooting the phone partitions are left mounted.
Warper
---------- Post added at 02:14 PM ---------- Previous post was at 02:02 PM ----------
cht5 said:
and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Click to expand...
Click to collapse
The idea of making a partition from CWM is to prepare the SD to use one of the memory extender scripts and that will not be usable from the normal environment.
Depends on the script to show the total amount of memory on the place where you can see the total memory left on the system.

[ROM[[P31XX] Stock 4.2.2 Debloated Deodexed Zipaligned

Removed
Reserved
Moar reserve
Screenshots
I'm gonna try this. Hope it works better. I'm not having any luck flashing the NEXT kernel and also have no phone audio using the "other" stock-based 4.2.2 (same problem as @ketut's Sammy-based 4.1.2)....
Ahhhh big job Luigi!! :beer:
Screenshots ?
I´ll hit "Thanks" tomorrow (Not able today: "Sorry, you are limited to 8 thanks per day")
You can also use https://www.file1.info/ for uploads.
Anonymous users can store files up to 1 GB and download files at a normal/slow speed. Registered users can store files up to 1.5 GB each, use 50 GB total and get higher speeds. Registration is free.
Click to expand...
Click to collapse
TabletUI patch?
rod555 said:
TabletUI patch?
Click to expand...
Click to collapse
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
fooiskandar said:
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Not Tablet UI Patch yet.
Also @Android-Andi Screenshots! Yes! I forgot.
Edit: Screenshots added on post 4
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Luigi2012SM64DS said:
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Click to expand...
Click to collapse
Please try add ro.carrier=wifi-only to build.prop, NEXT kernel will stop 2 phone related daemon on boot.
Alright, I made my own version of the blackhawk 4 update annnnnnd... mic still doesn't work. @ketut.kumajaya. I think 4.2.2 uses some different files for mic.
Any error with sync app & calendar?
For me everything went well. Realy smooth and fast. But first time i tried to delete some of the things i don't use from system/apps(nothing that i don't usually delete) TW FCs....will try again with only freezing. Ty for your good work
Does swap sd work? thanks
Not working on 3100
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
I have the P3113 and simply go into systemui.apk and remove all signal icons. I also remove all the battery icons simply because I prefer the bat %. I know this does not remove the phone stuff itself but it does get rid of the icons in the Noti bar without any errors.
Not the best way but it works.
fast and smooth but i have an problem after flashing there is no gallery app
a1shakes said:
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
Click to expand...
Click to collapse
try formatting /system and /data before you flash the ROM (just be sure you have a nandroid backup, ofc ^_^)

[HELP][PORT] Carbon 4.4.2

Hi, I need your help: So I tried to port the Carbon Rom from Samsung Galaxy S3 mini [4.4.2], and everything worked with porting, but:
When I rebooted the phone, it was "Optimizing apps", so it loads all Apps and then I got to the end of the process "Android is upgrading", here is the problem, the phone stucks at this step and if I try to shut the phone down, it stucks in bootloop ... then I have to clear Dalvik and Chache again and "Optimizing apps"-process starts again with the same result (stucks at Android is updating -Starting Apps)... hope for help
And I think I can't take logcat because I can't get into settings, to activate USB Debugging -.-
Solved ^^
Next problem: Data not working
Please, Please, Please help me solving this problem - developer please help me -.-
Yours, Flo
Like the pic in attechments; to the pic: this process wich is showed in this picture ends succesfully and then the phone stucks during Android is upgrading -Starting apps.
This port is based on what rom?cm11 tcmachybrid?
Sent from my GT-I9070 using xda premium
It's based on Maclaws build -he made one fully working- I mean a fully working CM 11 build for our phone (not released)
N which method did you use to port the rom?
Sent from my GT-I9070 using xda premium
I did it with a guide ... is there a opportunity to take a logcat althought I can't activate USB Debugging?
Yes you can, try to port again. And add this line into build.prop.. persist.service.adb.enable=1, persist.service.debuggable=1 and persist.sys.usb.config=mtp,adb
Sent from my GT-I9070 using xda premium
Not working ...
If anybody have time to take a logcat of the rom he should send me please a pm and so I can give you the link of the rom ... It would be a great help
Problem solved ... only problem: data not working ... can anybody help me please?
Hi @Flo0008, where in Carbon ROM HALO feature? I'm looking for this ;c
Bx16 said:
Hi @Flo0008, where in Carbon ROM HALO feature? I'm looking for this ;c
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=49031599&postcount=53
Topse said:
http://forum.xda-developers.com/showpost.php?p=49031599&postcount=53
Click to expand...
Click to collapse
Oh, okay. Thanks
Bx16 said:
Oh, okay. Thanks
Click to expand...
Click to collapse
btw, you can "click" thanks
your welcom

[Q&A] [Finality Update][C530X][SP][4.3][.207][UBL][03/10/14] Xperia Performance Max

[Q&A] [Finality Update][C530X][SP][4.3][.207][UBL][03/10/14] Xperia Performance Max
Q&A for [Finality Update][C530X][SP][4.3][.207][UBL][03/10/14] Xperia Performance Max Ultra™
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Finality Update][C530X][SP][4.3][.207][UBL][03/10/14] Xperia Performance Max Ultra™. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
This rom is simply perfect,the best i ever tried on SP i have two questions .....
1 - can i install the fix immediately,after the installation and reboot of the rom?i mean without the settings of first boot?
2-It's normal that every boot show the message "upgrade of android" for two or 3 seconds and disappear?
Laplool said:
This rom is simply perfect,the best i ever tried on SP i have two questions .....
1 - can i install the fix immediately,after the installation and reboot of the rom?i mean without the settings of first boot?
2-It's normal that every boot show the message "upgrade of android" for two or 3 seconds and disappear?
Click to expand...
Click to collapse
Thank you my friend :victory:
* Not advisable and better and take the first boot after flashing and corrections.
* Yes, normal is optimizing all apps and a benefit for the rom.
Thank you
Marília de Oliveira said:
Thank you my friend :victory:
* Not advisable and better and take the first boot after flashing and corrections.
* Yes, normal is optimizing all apps and a benefit for the rom.
Thank you
Click to expand...
Click to collapse
ok,fortunately i used this way when i flashed...and what about clash of clans? it doesn't start.,it says "downloading content" and restart...:silly:
Laplool said:
ok,fortunately i used this way when i flashed...and what about clash of clans? it doesn't start.,it says "downloading content" and restart...:silly:
Click to expand...
Click to collapse
Gives error and better wait for later to start the rom does not create conflicts and thus avoids bootloping
yeaaah i solved using another connection (mine is very slow because i finished the MBytes :silly::silly thank u soo much master
Laplool said:
yeaaah i solved using another connection (mine is very slow because i finished the MBytes :silly::silly thank u soo much master
Click to expand...
Click to collapse
haha okay. thanks
Help.
Hi i have used this rom . It is very fast than any other rom that i tried
but the only problem is the "Android is Upgrading,.. Optimizing apps 1 of 223" message that appears once i reboot my phone
I have done wipe cache,factory reset, wipe dalvik. still this message appears at every reboot
in my case stamina mode dont work and system UI always force close when pluged in PC how to fix that?
selwynberja said:
Hi i have used this rom . It is very fast than any other rom that i tried
but the only problem is the "Android is Upgrading,.. Optimizing apps 1 of 223" message that appears once i reboot my phone
I have done wipe cache,factory reset, wipe dalvik. still this message appears at every reboot
Click to expand...
Click to collapse
Friend and normal and it's great to have this function for optimizing their applications as soon as your system starts ... and that means that clearing the cache of apps thus leaving the boot faster and freeing up more memory. do not worry this and normal and efficacious
---------- Post added at 04:13 PM ---------- Previous post was at 04:10 PM ----------
kuriwul said:
in my case stamina mode dont work and system UI always force close when pluged in PC how to fix that?
Click to expand...
Click to collapse
Friend works see the configurations. I'm trying to fix this error ... but ta super hard if someone could help me I will thank. Thank you :good:
android is upgrading
Everytime i have reboot my phone. android is upgrading alway pop up and 200+ is upgrade and repeat again in every reboot. How to fix ? Thank
Yakotsuki said:
Everytime i have reboot my phone. android is upgrading alway pop up and 200+ is upgrade and repeat again in every reboot. How to fix ? Thank
Click to expand...
Click to collapse
Friend this is normal and is good for the system of cell it clears the cache of the apps causing the boot faster and opens apps faster too. The odex rom and then it is a benefit. Thanks
Sent from my C5303 using XDA Free mobile app
live animated wallpapers
Hi marilia, your rom is awesome but have a problem, animated backgrounds do not work me, there any way to fix that?
thanks for your hard work on this rom
pd: sorry for my bad english
USB debugging which will make the system UI not responding. Any help on this?
thanks.
winsters said:
Hi marilia, your rom is awesome but have a problem, animated backgrounds do not work me, there any way to fix that?
thanks for your hard work on this rom
pd: sorry for my bad english
Click to expand...
Click to collapse
Yes friend, more and better left without because they consume much battery and RAM run in the background. Thanks
Sent from my C5303 using XDA Free mobile app
---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------
mental00712 said:
USB debugging which will make the system UI not responding. Any help on this?
thanks.
Click to expand...
Click to collapse
this only occurs when you try something via adb, I'm looking for a more still have not found solution and did not have anyone help me ... still searching deeper to find out how to fix it. sorry and thank you
Sent from my C5303 using XDA Free mobile app
I'm using LBL device and this rom still working amazing
cobra9x said:
I'm using LBL device and this rom still working amazing
Click to expand...
Click to collapse
Very Good ✌. Thanks
Sent from my C5303 using XDA Free mobile app
I tried a lot of custom roms, and finally I found stabile and fast rom. Thank you Marilie.
metingul said:
I tried a lot of custom roms, and finally I found stabile and fast rom. Thank you Marilie.
Click to expand...
Click to collapse
Thank you so much
Sent from my C5303 using XDA Free mobile app
Verry nice rom, thanks. Ik am using it with Williams kernel v8.
One quastion how can i disable screenlock?
Sent from my C5303 using XDA Free mobile app

Categories

Resources