It seems that the image listed on clockworkmod.com for the Verizon G2 is not a loki compatible image. I tried installing the recovery image via ROM manager, and then via adb push / loki_flash, but both ways it bombed.
I assumed that the recovery image listed on clockworkmod.com and the one that is installed cia ROM Manager would be a loki image, but it is not.
I created one and installed it on my device. If anyone would like the recovery image, I can post it.
Why are you using ClockworkMod Recovery when we have TWRP that has been pre-lokied?
kaczmar2 said:
It seems that the image listed on clockworkmod.com for the Verizon G2 is not a loki compatible image. I tried installing the recovery image via ROM manager, and then via adb push / loki_flash, but both ways it bombed.
I assumed that the recovery image listed on clockworkmod.com and the one that is installed cia ROM Manager would be a loki image, but it is not.
I created one and installed it on my device. If anyone would like the recovery image, I can post it.
Click to expand...
Click to collapse
Thanks for your effort. Yes, post a link to the image. I would like the option of clockworkmod.
Links to CWM Recovery loki images for Verizon LG G2
hoodshy said:
Thanks for your effort. Yes, post a link to the image. I would like the option of clockworkmod.
Click to expand...
Click to collapse
Here they are:
http://www.androidfilehost.com/?a=show&w=files&flid=8961
There is one image for CWM recovery and one for touch recovery. The loki images were created from the CWM images on clockworkmod.com using loki_flash.
These images must be flashed using the loki_flash method detailed here (use option 1):
http://forum.xda-developers.com/showthread.php?t=2449670
Just replace the name of the *.img file specified in those instructions with the *.lok file you downloaded from the link above.
*** THIS IMAGE IS ONLY VALID FOR THE VERIZON LG G2 VARIANT! DON"T FLASH IT ON ANY OTHER DEVICES ***
ericdabbs said:
Why are you using ClockworkMod Recovery when we have TWRP that has been pre-lokied?
Click to expand...
Click to collapse
Why not? Always good to have options.
Thank you very much!
Sent from my VS980 4G using Tapatalk
Awsome bro thnx a lot 4 this
Sent from my VS980 4G using XDA Premium 4 mobile app
Testing with Flashify
Anyone want to test installation of these images by using Flashify? There have been some requests to do this.
kaczmar2 said:
Anyone want to test installation of these images by using Flashify? There have been some requests to do this.
Click to expand...
Click to collapse
I ran into the same problem with the AT&T version. Once you created the patched recovery file you do not need to flash with loki. You can change the extension back to img and flash anyway you like.
---------- Post added at 01:52 AM ---------- Previous post was at 01:52 AM ----------
kaczmar2 said:
Anyone want to test installation of these images by using Flashify? There have been some requests to do this.
Click to expand...
Click to collapse
ATT version can be flashed with Flashify so I am guessing the Verizon version can too
this needs its own thread in the verizon dev section. I didn't even know CWM existed for the verizon version until just now. So op, make a theard in verizon dev section so more will see this.
imucarmen said:
this needs its own thread in the verizon dev section. I didn't even know CWM existed for the verizon version until just now. So op, make a theard in verizon dev section so more will see this.
Click to expand...
Click to collapse
He doesn't have enough posts. And thanks for CWM with Loki.
I tried using flashify and it says used wrong extension?
Yeah not enough posts for me yet.
Mandelbrot.Benoit said:
He doesn't have enough posts. And thanks for CWM with Loki.
Click to expand...
Click to collapse
Flashify.
I've not used flashify, but it may be because it's looking for a file with an *.img extension. The loki-fied files end in *.lok. I'll add copies of both images that end in *.lok.img. See if that works.
revolt1 said:
I tried using flashify and it says used wrong extension?
Click to expand...
Click to collapse
Links to CMW recovery loki files
Done: Two more files added to the directory
recovery-clockwork-6.0.4.4-vs980.lok.img
recovery-clockwork-touch-6.0.4.4-vs980.lok.img
They are identical (binary same, MD5 sums match) to the *.lok files. See if these work with Flashify.
http://www.androidfilehost.com/?a=show&w=files&flid=8961
kaczmar2 said:
I've not used flashify, but it may be because it's looking for a file with an *.img extension. The loki-fied files end in *.lok. I'll add copies of both images that end in *.lok.img. See if that works.
Click to expand...
Click to collapse
Yes, correct. I just tested these with Flashify and they work. You can either change the extension, as you did, or just append *.img, as I did. I created two copies of leach loki-fied image if people don't want to change the extension.
AndroidUser00110001 said:
I ran into the same problem with the AT&T version. Once you created the patched recovery file you do not need to flash with loki. You can change the extension back to img and flash anyway you like.
---------- Post added at 01:52 AM ---------- Previous post was at 01:52 AM ----------
ATT version can be flashed with Flashify so I am guessing the Verizon version can too
Click to expand...
Click to collapse
Thread moved to G2 Android Development (Verizon)
Started thread in G2 Android Development (Verizon):
http://forum.xda-developers.com/showthread.php?t=2498941
imucarmen said:
this needs its own thread in the verizon dev section. I didn't even know CWM existed for the verizon version until just now. So op, make a theard in verizon dev section so more will see this.
Click to expand...
Click to collapse
fantastic thank you I was just looking for this
Sent from my VS980 4G using XDA Premium 4 mobile app
Related
These are the factory image files for flashing via fastboot to the OTA image
http://goo.im/devs/agrabren/shield/original_images
Files:
boot.img
system.img
recovery.img
agrabren said:
These are the factory image files for flashing via fastboot to the OTA image
http://goo.im/devs/agrabren/shield/original_images
Click to expand...
Click to collapse
great from the looks of it we might have something going in the next month or so if people are willing to but this one of a kind and great device.
elitecmdr666 said:
great from the looks of it we might have something going in the next month or so if people are willing to but this one of a kind and great device.
Click to expand...
Click to collapse
I expect to have a custom recovery up and running by the end of the weekend. I had one a few months ago, and if I still have the setup, I'll have a custom recovery sooner. But I won't know till tomorrow. It'll be CWM, not TWRP unfortunately.
I'm also intending to get a full build of CM10.2 up on the device, complete with all the standard features (with possibly a *few* exceptions, like the virtual mouse support).
agrabren said:
I expect to have a custom recovery up and running by the end of the weekend. I had one a few months ago, and if I still have the setup, I'll have a custom recovery sooner. But I won't know till tomorrow. It'll be CWM, not TWRP unfortunately.
I'm also intending to get a full build of CM10.2 up on the device, complete with all the standard features (with possibly a *few* exceptions, like the virtual mouse support).
Click to expand...
Click to collapse
no worries i know things like this wont happen over time. one thing im good with is patients lol so no hurry. already a few people on the nvidia forums are wondering about overclocking lol thats the pc mentality =) but i look forward to this...for now im enjoying stock.
elitecmdr666 said:
no worries i know things like this wont happen over time. one thing im good with is patients lol so no hurry. already a few people on the nvidia forums are wondering about overclocking lol thats the pc mentality =) but i look forward to this...for now im enjoying stock.
Click to expand...
Click to collapse
Personally, I leave the overclocking to others. While I'm more than capable of modifying the kernel, I'm really more useful focused on things like features and porting. There are kernel devs who spend months focused on overclocking and different governors. I'm usually busy trying to get features ported or add new features (like adding touch to TWRP, or working on the 3D display and camera on the EVO 3D). I'm sure it won't be long until some new kernels pop up, and obviously by the end of the weekend, *someone* will have a flashable root, on top of the root method already posted.
I'm not worried about the overclocking lol that's them over on the Nvidia forums. I just want development to kick off after that everything else is a gimme and will come in due time.
elitecmdr666 said:
I'm not worried about the overclocking lol that's them over on the Nvidia forums. I just want development to kick off after that everything else is a gimme and will come in due time.
Click to expand...
Click to collapse
I want CM-10.2 with full audio and video acceleration, as well as relatively same or better benchmark scores, equal or better battery life, and the full streaming to still work smoothly.
agrabren said:
I want CM-10.2 with full audio and video acceleration, as well as relatively same or better benchmark scores, equal or better battery life, and the full streaming to still work smoothly.
Click to expand...
Click to collapse
OK well I guess there is someone who think they know something about root access on the shield have you heard anything?
elitecmdr666 said:
OK well I guess there is someone who think they know something about root access on the shield have you heard anything?
Click to expand...
Click to collapse
It's already been posted in another thread, but I forget which one. It's message 25 (or so). Root is easy, since we have fastboot access already.
agrabren said:
It's already been posted in another thread, but I forget which one. It's message 25 (or so). Root is easy, since we have fastboot access already.
Click to expand...
Click to collapse
OK I seen it but to me it's not root until I can get to recovery and it's properly done the last time I did it this way my device got screwed and had no way to do a recovery had the worst headache in history... I'll wait a bit more until it's more polished...
on the cm 10.2 do you plan are getting one from the ground up or try one that works on another device and modify it to work on the shield?
AWESOME once we have recovery its TINKER TIME!
1wayjonny said:
AWESOME once we have recovery its TINKER TIME!
Click to expand...
Click to collapse
It's almost done.
agrabren said:
It's almost done.
Click to expand...
Click to collapse
I'm far from a developer, but I wanted to say thanks for spearheading development for the Shield, all of us here appreciate it
Sent from my SGH-M919 using XDA Premium HD app
hurrpancakes said:
I'm far from a developer, but I wanted to say thanks for spearheading development for the Shield, all of us here appreciate it
Sent from my SGH-M919 using XDA Premium HD app
Click to expand...
Click to collapse
Seconded. You've been a big help agrabren
Sent from my Nexus 7 using xda app-developers app
Original Recovery image has been posted as well.
Hello, just saw this today and thought it would be good update for the first post.
The factory images were posted in whole on Nvidia's developer page
Factory Image: http://developer.download.nvidia.co...ct-nv-recovery-image-shield-8857_194.5436.zip
Source: https://developer.nvidia.com/develop4shield#OSR
Before flashing this recovery image to your SHIELD, connect your SHIELD
via USB to the PC where you downloaded this recovery image.
Next, put your SHIELD into fastboot mode using one of the following methods:
SW method:
Boot to android home screen
Connect the device to linux/windows system
Open terminal(on linux);command prompt(on windows).
Type "adb reboot bootloader" in terminal/command prompt
HW method:
Turn off the device
Press and hold "Back"+"Home"+"SHIELD" buttons till device boots
To flash this recovery image to your SHIELD, run the following commands from
the directory where you extracted the recovery image package:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb tegra114-roth.dtb
Click to expand...
Click to collapse
---------- Post added at 10:59 PM ---------- Previous post was at 10:41 PM ----------
Bah its a *.tgz inside of zip, the *.tgz is not working with WinRar so I may try 7 zip. It would be great if this was reposted as just a ZIP (not tgz inside) on the Nvidia page with MD5's for each image.
Is it possible to get the MD5's?
Thanks
---------- Post added at 11:32 PM ---------- Previous post was at 10:59 PM ----------
I unpacked these for everyone and also included the MD5's from my download/extraction.
android-info.txt
MD5: A03F62DE234B5122CD7172D0145B4465
recovery.img
MD5: 71686F8CE9E47C983A5A4AE9B231C4C6
boot.img
MD5: 8E8B967627D1933EF36C6CFFE7D28D22
system.img
MD5: 34317AB69F243A5E67A4A128DF7B5697
userdata.img
MD5: A06A6A67B70328A55A56E61618D3F0A1
blob
MD5: 6D9792BA68E8FB885D70348B9A55D35F
tegra114-roth.dtb
MD5: 820BC8BA0081A97AF943C7B54597A5E5
1wayjonny said:
Hello, just saw this today and thought it would be good update for the first post.
The factory images were posted in whole on Nvidia's developer page
Factory Image: http://developer.download.nvidia.co...ct-nv-recovery-image-shield-8857_194.5436.zip
Source: https://developer.nvidia.com/develop4shield#OSR
---------- Post added at 10:59 PM ---------- Previous post was at 10:41 PM ----------
Bah its a *.tgz inside of zip, the *.tgz is not working with WinRar so I may try 7 zip. It would be great if this was reposted as just a ZIP (not tgz inside) on the Nvidia page with MD5's for each image.
Is it possible to get the MD5's?
Thanks
---------- Post added at 11:32 PM ---------- Previous post was at 10:59 PM ----------
Click to expand...
Click to collapse
I'm going to upload them now to my servers. Going to extract all and make it just a zip. Also will give you the option to download the full zip or each file separately. Will be done shortly
Scratch that for now. Having issues getting the .tgz file to extract right.
AndroidFileHost said:
I'm going to upload them now to my servers. Going to extract all and make it just a zip. Also will give you the option to download the full zip or each file separately. Will be done shortly
Scratch that for now. Having issues getting the .tgz file to extract right.
Click to expand...
Click to collapse
I can upload the files as I already extracted them. The original OP is away from computers at the moment so I was just gonna wait until he gets back as its his thread. =)
If anyone is wondering why the extraction issue is because its needs to be uncompressed in linux where a GUI for licenses accept. If you have urgent need for the files I can post them.
Flash failed
every time i try to flash something on the bootloader it tells me it fails. any ideas?
I have problem with custom recovery. When I try AutoRec and KitKat 24A freedom and I got random lines (in attachments)
Can I downgrade my soft or use "one click" tools or something like that? Or maybe can I do this manually using command line?
My system info in attechments.
Ioroot and then download autorec you can Google both its very simple no downgrade needed I am running android l right now
Sent from my LG-VS980 using XDA Free mobile app
androidreviewguy said:
Ioroot and then download autorec you can Google both its very simple no downgrade needed I am running android l right now
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
I try autorec and i got this line in attachments. So doesnt work for me
I have the same problem after using KitKat 24A freedom.
Lokomisiek said:
I try autorec and i got this line in attachments. So doesnt work for me
I have the same problem after using KitKat 24A freedom.
Click to expand...
Click to collapse
OK so what you need to do is download the lg flash tool and downgrade to 12b or 11a and then you won't have any issues at all
Sent from my LG-VS980 using XDA Free mobile app
androidreviewguy said:
OK so what you need to do is download the lg flash tool and downgrade to 12b or 11a and then you won't have any issues at all
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Then before instalation kitkat custom rom i must update Baseband to 24A?
Lokomisiek said:
I try autorec and i got this line in attachments. So doesnt work for me
I have the same problem after using KitKat 24A freedom.
Click to expand...
Click to collapse
It may be a result of using the wrong kernel for your panel type, see this in the Autorec OP...
Having white lines issue: http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281
To be sure, use this app to check your panel type, if it's JDI, follow the instructions in the link above. - http://forum.xda-developers.com/showthread.php?t=2770769
Edit:The link was bad I posted before, try it now.
---------- Post added at 11:28 AM ---------- Previous post was at 11:27 AM ----------
androidreviewguy said:
OK so what you need to do is download the lg flash tool and downgrade to 12b or 11a and then you won't have any issues at all
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
What exactly is that supposed to do for him other then put him back on a JB rom?
mjones73 said:
It may be a result of using the wrong kernel for your panel type, see this in the Autorec OP...
Having white lines issue: http://forum.xda-developers.com/show...&postcount=281
---------- Post added at 11:28 AM ---------- Previous post was at 11:27 AM ----------
What exactly is that supposed to do for him other then put him back on a JB rom?
Click to expand...
Click to collapse
It makes it so you can flash recovery? I had the exact same issue that he is having as well as about 300 other people.... You have to downgrade to jellybean then take the ota to kitkat 24a then flash autorec after that you need to download the 24a bootstack flash it and then you will be able to flash 24a ROMs BUT ALSO will then be able to just change modems if you want to try a ROM like the one I'm on lollipop 5.0 to 12b modem read the forums and if someone tells you to do something else other than this don't listen ask around to the people that know what there doing you'll just end up with a brick and have to use lg flash tools anyways lol good luck!
Sent from my LG-VS980 using XDA Free mobile app
androidreviewguy said:
It makes it so you can flash recovery? I had the exact same issue that he is having as well as about 300 other people.... You have to downgrade to jellybean then take the ota to kitkat 24a then flash autorec after that you need to download the 24a bootstack flash it and then you will be able to flash 24a ROMs BUT ALSO will then be able to just change modems if you want to try a ROM like the one I'm on lollipop 5.0 to 12b modem read the forums and if someone tells you to do something else other than this don't listen ask around to the people that know what there doing you'll just end up with a brick and have to use lg flash tools anyways lol good luck!
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
I guess I was lucky, didn't need to downgrade and re-upgrade to use Autorec on my phone.
androidreviewguy said:
It makes it so you can flash recovery? I had the exact same issue that he is having as well as about 300 other people.... You have to downgrade to jellybean then take the ota to kitkat 24a then flash autorec after that you need to download the 24a bootstack flash it and then you will be able to flash 24a ROMs BUT ALSO will then be able to just change modems if you want to try a ROM like the one I'm on lollipop 5.0 to 12b modem read the forums and if someone tells you to do something else other than this don't listen ask around to the people that know what there doing you'll just end up with a brick and have to use lg flash tools anyways lol good luck!
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
So, i can downgrade to 11A version, then flash recovery and instal for example ParanoidAndroid 4.4.4 or CM11? Or i must first do OTA to 24A then flash recovery?
Did you happen to check my post above? Check your panel type.
mjones73 said:
Did you happen to check my post above? Check your panel type.
Click to expand...
Click to collapse
I only see instruction for custom recovery... or i'm blind
Lokomisiek said:
I only see instruction for custom recovery... or i'm blind
Click to expand...
Click to collapse
Use this app to see what panel type you have and let us know.
http://forum.xda-developers.com/showthread.php?t=2770769
If it's JDI, you probably need to use a different kernel.
http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281
mjones73 said:
Use this app to see what panel type you have and let us know.
http://forum.xda-developers.com/showthread.php?t=2770769
If it's JDI, you probably need to use a different kernel.
http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281
Click to expand...
Click to collapse
but when i got white lines i dont see anything? I got this problem after restart phone...
Lokomisiek said:
but when i got white lines i dont see anything? I got this problem after restart phone...
Click to expand...
Click to collapse
Then as noted in the Autorec thread, you probably need to flash the kernel I posted above.
mjones73 said:
Then as noted in the Autorec thread, you probably need to flash the kernel I posted above.
Click to expand...
Click to collapse
But i have only stock recovery... i can't flash ZIP file....
Lokomisiek said:
But i have only stock recovery... i can't flash ZIP file....
Click to expand...
Click to collapse
You need to use Autorec to install TWRP, boot into TWRP, flash the kernel for white line issue. You can confirm beforehand if you have a JDI panel using the app I linked above if you want to be 100% sure that's what your problem is before doing these steps.
If you're currently stuck with white lines and can't see the screen, the only thing I can recommend is returning it to stock using the guide in the General section and starting over.
mjones73 said:
You need to use Autorec to install TWRP, boot into TWRP, flash the kernel for white line issue. You can confirm beforehand if you have a JDI panel using the app I linked above if you want to be 100% sure that's what your problem is before doing these steps.
If you're currently stuck with white lines and can't see the screen, the only thing I can recommend is returning it to stock using the guide in the General section and starting over.
Click to expand...
Click to collapse
I have white lines in download mode, in recovery... everywhere. ONLY THIS.
Lokomisiek said:
I have white lines in download mode, in recovery... everywhere. ONLY THIS.
Click to expand...
Click to collapse
As long as you can get in download mode, you can still restore it to stock, you don't need to see the display.
mjones73 said:
As long as you can get in download mode, you can still restore it to stock, you don't need to see the display.
Click to expand...
Click to collapse
Yeah, but i can't flash anything via recovery i'm flash KDZ file two times...
Lokomisiek said:
I have white lines in download mode, in recovery... everywhere. ONLY THIS.
Click to expand...
Click to collapse
1. Flash stock rom kdz.
2. Root it.
3. Download kernel for jdi http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281
and copy to internal card.
4. Instal Flashify from market.
5. Install Autorec and run. On prompt to reboot to recovery - say no.
6. Run flashify and flash kernel from 3 step via twrp.
7. reboot.
8. wait while flashing kernel (....its all in lines... wait....)
...wait foк lock screen after boot or lock it manually by power on-off.
and it all ok... but boot process and recovery in lines.
if you install twrp app from market, you will be able to flash some roms.
...but this is all that I have achieved.
Is it available? Or it is too early? thanks
I would really love it if we could get this.
The Nexus 6P already got it.
hopefully someone's working on one. If I knew how I would.
Android N Developer Preview OTA image - it is official flashable zip. So, we need someone who grub this OTA link.
droid-life.com/2014/06/05/download-nexus-ota-url-file/
Very surprised still we haven't got it.
manikandanguru said:
Very surprised still we haven't got it.
Click to expand...
Click to collapse
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
manikandanguru said:
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
Click to expand...
Click to collapse
Tried that already, its not working with Multirom
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Can this be flashable as secondary rom in MultiROM?
manikandanguru said:
Can this be flashable as secondary rom in MultiROM?
Click to expand...
Click to collapse
That was my understanding. I'm downloading right now to try it.
danstah said:
That was my understanding. I'm downloading right now to try it.
Click to expand...
Click to collapse
Downloading too.. Lets see
It's working with MultiRom for me.
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Thanks man!
danstah said:
It's working with MultiRom for me.
Click to expand...
Click to collapse
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
Can you link system and boot IMG plz
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
i downloaded it then unzipped it.. then just pulled it out of N. i dont have anyplace to upload to at the moment, sorry.
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
You can just pull them from Google's .tgz image file.
JimSmith94 said:
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
Click to expand...
Click to collapse
Yup can confirm it works as a secondary ROM
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
it'll be quicker downloading it then pulling it out. its only 842mb, the system.img unzipped is 1.2gb.
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source will be updated in my github https://github.com/TWINNFAMOUS/android_device_htc_ocl/tree/android-7.1
MAJOR THANKS & CREDITS TO @Captain_Throwback @nkk71 for all the help with getting twrp working and decryption.
fastboot flash recovery recovery.img or what ever you name it.
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Known bugs for twrp 3.2.1-0
Reboot to recovery does not work.
We need kernel source to fix so don't ask unless you know there's kernel source.
Make sure to report back ANY BUGS.
Link to Oreo compatible twrp 3.2.1-0
https://www.androidfilehost.com/?fid=11410963190603878155
Link to Nougat compatible twrp
https://www.androidfilehost.com/?fid=11410963190603878120
Link to stock T-Mobile recovery is broken
If u guys want to thank me make a thread where people can upload there stock imgs boot system and recovery with software numbers and get a little more active it is a HTC phone after all. And please hit the thanks button if I have helped you.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test. https://drive.google.com/file/d/1pRpcZ2E3EjaMliu8Gwga9LJvvyhWQvL9/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
I thought you purchased the stock images from that website?..
dpryor88 said:
I thought you purchased the stock images from that website?..
Click to expand...
Click to collapse
They don't have T-Mobile version I got the stock recovery after I rooted.
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
twinnfamous said:
They don't have T-Mobile version I got the stock recovery after I rooted.
Click to expand...
Click to collapse
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
dpryor88 said:
Ohhh
---------- Post added at 08:32 PM ---------- Previous post was at 08:22 PM ----------
The test TWRP build on here works for me. Can't access SD card/data. Is that still a known issue or did I do something wrong when flashing? It took a few seconds to load TWRP when rebooting to recovery, then it asked for a password, where I just pushed Cancel. Then I swiped to allow modifications. No access to data though.
Thanks for this though dude! It's progress!
Click to expand...
Click to collapse
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
Ok I'll hold off for now till things get worked out a bit.
twinnfamous said:
It won't unencrypt data. It did for me sometimes but not everytime and when I looked at the log it said my data partition was set to ext4 but said it was Emmc so I tried to change f.stab file and it still wouldn't unencrypt.
So I went to Twrp and in advanced format settings I clicked data partition and chose repair or change filesystem and changed from emmc to ext4 then it worked after it formatted. The only problem is now my secure boot doesn't work and Twrp never asks for a password. I wouldn't recommend doing what I did.
Click to expand...
Click to collapse
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
dpryor88 said:
https://forum.xda-developers.com/z2-force/development/twrp-3-1-1-0-moto-z2-force-nash-t3687421
Check this out. They have twrp but it needs to be formatted first to enable encryption. I guess magisk doesn't do this but SuperSU does? Maybe you'll understand.
Hope this helps.
Click to expand...
Click to collapse
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
twinnfamous said:
I did the format data already and I use the same supersu that I use on my HTC 10 the only thing I had to do is flash back stock boot.img because su wouldn't patch the magisk one. Now we need some custom roms.
Click to expand...
Click to collapse
So how did you fix in the end?
So you have the stock boot.img after all?
dpryor88 said:
So how did you fix in the end?
So you have the stock boot.img after all?
Click to expand...
Click to collapse
I used the stock is unlocked boot image.
I posted it in the root thread
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the thread
Click to expand...
Click to collapse
Which thread? I only see stock recovery..
---------- Post added at 08:41 AM ---------- Previous post was at 08:19 AM ----------
twinnfamous said:
I used the stock is unlocked boot image.
I posted it in the root thread
Click to expand...
Click to collapse
I formatted and supersu'd. Now you're right, we need roms haha.
twinnfamous said:
I have only tested on T-Mobile and us unlocked so flash at your own risk if u have a different device variant.
It was made for T-Mobile and us unlocked so I'm not sure if it would work on other variants.
Source is in my github profile
fastboot flash recovery recoverytest.img
Flashes images and zips and will take full backups.
Also is stock T-Mobile recovery.
I need a stock T-Mobile boot.img and system if anyone decides to send me one it would be appreciated.
Make sure to report back
Link to twrp test2
https://drive.google.com/file/d/1Km7axvKZYImX_Qat7kV-iZQTJobvWlcP/view?usp=drivesdk
Link to stock T-Mobile recovery. https://drive.google.com/file/d/14uRTanDjkeeGkUwdGoJhgAICSGgfjbLq/view?usp=drivesdk
Click to expand...
Click to collapse
What's new in the version 2?
dpryor88 said:
What's new in the version 2?
Click to expand...
Click to collapse
hoping decryption works everything else works.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Nice I'll try it in a minute
---------- Post added at 03:46 AM ---------- Previous post was at 03:15 AM ----------
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Any clue what the easiest way is to go back to my unformatted data? I formatted so I could see internal... Now I wanna go back if twrp will read internal now
Thanks.
twinnfamous said:
hoping decryption works everything else works.
Click to expand...
Click to collapse
Everything on test2 works for me. But I did already format my data before on the first build, so i can't really be the best review for this. But for me, all is working great. Thanks!
Gonna flash the final version here in a minute. I'll report back
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Sent from my HTC U11 life using XDA-Developers Legacy app
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this✌
Click to expand...
Click to collapse
Make that two of us. Works great.
Lavell11 said:
Twrp working great for me...now I'm fully rooted...thanks alot for this
Sent from my HTC U11 life using XDA-Developers Legacy app
Click to expand...
Click to collapse
dpryor88 said:
Make that two of us. Works great.
Click to expand...
Click to collapse
I'm happy to now I can sleep tonight
twinnfamous said:
I'm happy to now I can sleep tonight
Click to expand...
Click to collapse
Get some ? bro..?
Sent from my HTC U11 life using XDA-Developers Legacy app
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
dkotoric said:
I have a US Model BLA-A09 that I flashed LineneageOS on. How do I return the unit back to stock. I can't seem to find the stock firmware anywhere for this model.
Thanks
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
ej_424 said:
I have a US model and sorry can't answer your question however hoping you can help me by explaining how you rooted and unlocked your phones boot loader? If there is no way to recover for us US users though I may want to hold off.
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
lvbaal said:
http://pro-teammt.ru/firmware-database/?firmware_model=bla-l09&firmware_page=0
---------- Post added at 04:32 PM ---------- Previous post was at 04:23 PM ----------
https://forum.xda-developers.com/ma...o-standard-t3709535/post74619290#post74619290
Click to expand...
Click to collapse
Only follow the unlock part, then flash TWRP (https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904) from dev section and latest magisk after that. (http://tiny.cc/latestmagisk)
@dkotoric there doesn't seem to be any A09 yet. Either it hasn't gotten any updates yet or they just haven't been found.
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
253simon said:
I have stock firmware for BLA-A09 I can share with you. Tell me where to send
Click to expand...
Click to collapse
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
253simon said:
here is the update.app from -BLA-A09 8.0.0.110(C567) update zip https://drive.google.com/open?id=1k2IvVqMyjoMWlSe1ZgXWRYt6wn4n4qaY
Click to expand...
Click to collapse
dude cannot thank you enough!!!
culiacanazo said:
dude cannot thank you enough!!!
Click to expand...
Click to collapse
How do I flash in fastboot?
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
253simon said:
How do I flash in fastboot?
Click to expand...
Click to collapse
Thank you, i intend to help but at the moment i really can't. I'll get to it myself as soon as i have a chance
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
No problem
culiacanazo said:
fastboot is the way! Thank you for sharing the firmware!
Edit why are they uploading sideways all of a sudden?!
Click to expand...
Click to collapse
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Sent from my BLA-A09 using Tapatalk
253simon said:
Here is the SYSTEM.img
https://drive.google.com/file/d/1u7XGEOnrNL3R6vWn17-9JUqxjmAe4Fbs/view
With this guide to flash the img file
https://forum.xda-developers.com/mate-10/how-to/guide-treble-compatible-rom-t3761927
Click to expand...
Click to collapse
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
chandler781 said:
Any chance you could post the SYSTEM.img again. The extract tool isnt working for me. Thanks!
Click to expand...
Click to collapse
Im away from the computer right now but can post it later
253simon said:
Im away from the computer right now but can post it later
Click to expand...
Click to collapse
Perfect, thanks!!
chandler781 said:
Perfect, thanks!!
Click to expand...
Click to collapse
https://forum.xda-developers.com/ma...9-c567-usa-t3775258/post76170754#post76170754
got it buddy :highfive:
rogconnect said:
Your pictures shown it's flashed kernel and recovery. Did you manually flashed it? Or it's doing automatically.....
Click to expand...
Click to collapse
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
culiacanazo said:
I manually flashed the system.IMG, kernel (aka boot) and recovery ramdisk image thru fastboot. With that, I was able to start (it wouldn't) but I somehow was missing some things I had deleted (and that's understandable) but some things I never had as well (such as system update, clones, magazine, and translator.
Somehow, after starting I was able to see the update in Firmware Finder, which before that I hadnt been able to. Downloaded it immediately and I also, same as another commenter I read just now around here somewhere, had problems with the extractor, so this time instead of the three individual IMGs thru fastboot, I flashed TWO of the supposed to be three update, update full, and update public (with the missing one being update.zip) straight thru the unofficial TWRP and voila! Back to complete clean stock with safety net (and Google pay verified and conserving custom recovery
Click to expand...
Click to collapse
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Sent from my BLA-A09 using Tapatalk
rogconnect said:
Could you kindly share the kernel and ramdisk image please?
Very much appreciate!
Click to expand...
Click to collapse
I can if you want but they're here and are the same ones
Huawei mate 10 pro-bla-a09 (c567) usa
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258