I recently got a lumia 822 and would like to use it as a USB connected http proxy. I don't want a full network connection or wifi based solution as I need to keep my computer connected to the existing network but would like to be able to tell Firefox to connect to the Internet via a proxy so web traffic if passed through the phone thus avoiding the internal web monitoring.
I do this via proxoid on my android phone and it works perfect. If there a comparable solution for windows phone 8?
Thanks
The only solution available is TetherX. Its available in the Windows Phone Store. It works via WiFi that's hosted from a laptop and only WebPages work. The only device at this time that supports USB tethering is the Samsung ATIV, using Diagnosis.
Sent from my RM-860 using Tapatalk
That's... not really USB tethering in the usual sense at all (which does exist, at least for the Samsung WP8 phones) but it might be possible. I don't know if anybody has written a proxy server app for the phone yet, but it's a pretty clever thing to do, now that I think about it. The SDK should support it; we can do server sockets just fine. Doing it over USB would be tricky - the phone can do Ethernet over USB, but it's not part of the official SDK - but it might be possible. Setting it up as a WiFi proxy (with some security, ideally...) shouldn't be too hard.
GoodDayToDie said:
That's... not really USB tethering in the usual sense at all (which does exist, at least for the Samsung WP8 phones) but it might be possible. I don't know if anybody has written a proxy server app for the phone yet, but it's a pretty clever thing to do, now that I think about it. The SDK should support it; we can do server sockets just fine. Doing it over USB would be tricky - the phone can do Ethernet over USB, but it's not part of the official SDK - but it might be possible. Setting it up as a WiFi proxy (with some security, ideally...) shouldn't be too hard.
Click to expand...
Click to collapse
Yeah, calling it a tether is not exactly right but I wasn't really sure what to call it. The issue with having it as a wifi spot is that it would be visible. The real reason I was looking for something like this is work has pretty draconian monitoring software. I haven't gotten the phone yet but once I do I may try to look into how the computer sees it when plugged into USB. If the phone can be exposed as an ip (127.0.0.1) via USB then it would seem possible to write an app to open a port and pass the traffic back and forth.
Thank you though.
HT123 said:
Yeah, calling it a tether is not exactly right but I wasn't really sure what to call it. The issue with having it as a wifi spot is that it would be visible. The real reason I was looking for something like this is work has pretty draconian monitoring software. I haven't gotten the phone yet but once I do I may try to look into how the computer sees it when plugged into USB. If the phone can be exposed as an ip (127.0.0.1) via USB then it would seem possible to write an app to open a port and pass the traffic back and forth.
Thank you though.
Click to expand...
Click to collapse
First, I don't have the phone yet so all of these ideas are just wild speculation but at quick glance the program ipoverusbenum may help in a USB proxy solution. without a way to do this, I'm stuck with my old android device.
Related
I'm looking to understand what options exist for tethering the NC to a phone for data. I believe the only method currently supported is by creating an ad-hoc wifi network using software on the phone, and joining this network from the NC.
I have a Blackberry 9700, which cannot be setup as a wifi hotspot. With the release of CM7 build 17, it sounds like Bluetooth works (with limited range). My phone supports Bluetooth tethering because I've set it up with my Windows 7 laptop. I'm curious to find out whether this will be possible with the NC as well.. if not, what other options are there for getting online with my NC (besides having to purchase a phone that has hotspot capability). I used to use PDANet with a Palm Treo back in the day.. I'm also not opposed to physical cable-tethering if this is a possibility.
Thanks in advance.
I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).
neoshi said:
I would like to know this as well. My Evo is not rooted and I'd like to keep it that way for now, so my only options are PDAnet via physical cable and bluetooth (which I can utilize on CM7 but it breaks wifi) or Easytether (physical).
Click to expand...
Click to collapse
So are you confirming that you've got Bluetooth tethering working with your phone using CM7? Does the build break wifi permanently, or is it only during BT tethering?
Haven't tried it yet but now that you mention it.. I'm going to try it!
Excellent, can't wait to hear the results..
Will pair, won't connect
Well, that takes that option out of the running. I really prefer a physical connection though, and so far, I haven't seen any micro-micro (assuming this is because of power requirements anyway).
Even with the phone right next to the NC? That's disappointing.. by micro-micro, are you referring to the type of USB cable needed? I don't have the device yet, so I'm not sure what kind of connections it has available. Tethering over BT is the last feature I'm waiting for before pulling the trigger on this bad boy. I plan to use it as a removable CarPC (using my phone for data and an external Bluetooth receiver for GPS).
Yup right next to it. Now, I've seen some guys report that GPS works though via bluetooth and I plan on trying that next (need to charge my BT receiver.. hope the battery still works!). They said you needed a GPS app to fix your location though.
As for micro-micro, yep USB. But then we would probably need a client side app to be able to recognize that kind of connection.
And wifi seems broken with BT ENABLED (not on, just enabled).. going to revert.
Thanks for doing all that testing. Let me know how the pairing goes with your GPS receiver.. if you get that working, you would need GPS software that has all of the maps built-in (since Google Maps, etc, requires a data connection).
My primary use for the NC will be as a car PC, so the only thing holding me back is the Bluetooth tethering with my Blackberry (uses the Dial-Up Networking feature set).
I've been hoping to BT DUN working for my BB 9700 also. At the moment it appears that ppp needs to be enabled in the kernel for this to work. When I run pppd from the comand line it complains about ppp missing from the kernel.
It looks like the pppd program is being compiled with the CM7 build and that the ppp modules can be found in the kernel sources so there is hope. We could ask to have it added as a dynamic module but I not sure how to go about making the request. (I am a noob to the forums and not allowed post in Dev and there may be a another way to make requested that is preferred in any case. )
I also found this program that claims to set up a BT DUN connection via ppp and it does run without faulting on my NC:
android.gval.biz
Thanks for sharing your experiences. I found a post in the developers forum where someone asked how to do the same thing. The link in the response discusses how to get Bluetooth GPS and WiFi tethering to work, but it does not mention Bluetooth tethering to a phone. Unfortunately, I don't have enough posts under my name to respond to that thread, but I've subscribed to it in the hopes that someone else will point it out..
http://forum.xda-developers.com/showpost.php?p=12282264&postcount=281
Same same same same.
Unrooted Evo and although I am having fun with all the great things we can do to our NC's I am really not ready to root my Evo just yet. Having that phone with me is the only reason I am able to walk away from my keyboard at all and just because you can doesn't mean you should.
I run Fedora on my laptop and can tether to my Evo using Azilink and USB cable without a problem but if I wanted to drag my lappie everywhere then the NC wouldn't be any fun atall!
Weird is when we can pair the Evo and the NC via Bluetooth (yes a few inches apart right now) but neither one wants to do the actual connection. The message pops up on both Evo and NC asking to acknowledge the "secret" code and what else to do but say yes to them both. Then they both try and fail to connect.
I guess there is a fix for AdHoc on CM7 but I am not sure how to get the unrooted Evo to create an AdHoc network for the NC to connect to. If anyone has that answer can you let us know? I will keep searching as well.
Deirdre
Hi there,
I just posted a pretty exhaustive guide to setting up ftp for fast wireless transfer of files between your phone and computer or alternatively between 2 phones on the same wireless network. Hope it's useful:
http://chimerical79.blogspot.com/2011/04/fast-wireless-transfer-of-files-between.html
Note: if you are good with this kind of thing you can just skim through the guide. It caters for beginners too.
This guide may be of particular interest if you are upset that Samsung advertised the Galaxy S as having Bluetooth 3.0 but failed to deliver due to the fact that android currently doesn't support it.
i was wondering if is possible to connect to my android from my desktop using direct ftp? (my pc being connected by cable to a wireless router)
pereira2088 said:
i was wondering if is possible to connect to my android from my desktop using direct ftp? (my pc being connected by cable to a wireless router)
Click to expand...
Click to collapse
Get SwiFTP from market, it does the trick. I use it regularly.
Sent from my CM'd SGS
Kurre said:
Get SwiFTP from market, it does the trick. I use it regularly.
Click to expand...
Click to collapse
i have it, but i'm only being able to connect through the proxy server, not directly
nevermind. it works if i turn off wifi and then turn it on.
First before people ask...no I can't get a decent ISP in my new apartment complex. They have a "deal" with some horrible small-time cable company that I've never heard of, and all the neighbors hate it. On top of that I have talked my work into paying for the account I plan on using for this since it's "required" so that I can work from home as needed.
That being said, I've done some initial speed tests at my new place and I get a consistent 11Mbps/3Mbps over Sprint's 4G/WiMAX, which is more than enough for my needs. I know that will fluctuate, but even so I'm excited about this project!
So sure I could just dump WiFi Tether on a rooted NS4G and leave it be, but I want to try taking it to the next level. What I'm thinking is a full-time router, much like a pfSense/SmoothWall/Vyatta distro, using the WiMAX (And 3G as a backup) for the WAN and the WiFi for the network connectivity. Unless I can figure out a better solution I would probably use a WRT54GL with dd-wrt to act as the wireless bridge for my wired clients.
It'll always be plugged into power, so battery isn't an issue (But a nice bonus for when the power does go out). I would like to have an always running bandwidth monitoring screen that I can just glance at. Of course there would be remote monitoring/configuration, as well as some built-in "apps".
I know this is a big task to take on, but I need something to focus on in regards to getting into the development side of things and I think this would be a great place to start. However I've got some questions that I think ya'll could help me figure out:
1 - What should I do for providing services like DHCP, DNS, Port Forwarding, NAT, etc? I know it would require some heavy lifting but I could cross-compile standard linux based apps like dhcpd right?
Or does anyone know of that perfect app that might help me get a head start? I don't mind using different apps/services and then focusing on making them all work together, but if there is a "simple" solution already that would be fine by me!
2 - Since it's not going to be a multimedia demon, is there a particular light-weight, almost console-only ROM that might serve to be the best base to build from? I would think something that is more geared towards running desktop-based applications versus the standard apps.
3 - WiMAX needs to work of course, how would that play into it?
4 - Is that anything that might allow me to plugin a standard ethernet cable? I don't think I've seen a mini-usb to ethernet yet...do they have a mini-usb to regular usb at least?
I know these are very basic questions, but I just want to get a pulse on if this is just an unobtainable idea or not. I don't think it is, it's basically a different way of getting to a MiFi. Also if anyone knows of anyone elses past attempts at this I would love to know where I can read up on it in. Thanx in advance!!!
My phone overheats if it tethers for hours upon hours. Gets kind of annoying. I suggest you buy a external charger and another battery so you don't have to play " let the battery cool down" game.
I had the same issue on my other 2 smartphones while tethering (Samsung instinct with ported 1.6. And optimus s)
I would say try finding a loophole or move. Slow internet is a whore. I use hot sport off my phone to my ps3. And I can only play from 11pm-6am lag-free.
Sent from my Nexus S 4G using Tapatalk
Are you oc'ed or something I tether my phone for hours a day and havent had it over heat except for when I was oc'ed above 1.2ghz.
There are a few issues with this.
1.Restrictive firewalling policies on the ISP side. Blocked ports/ throttling.
2.Added latency from wireless > wireless bridge. With wireless you will need to tether to a wireless bridge with ethernet ports for your computers. wrt54g and the like with dd-wrt work fine for this. A linux computer with a wireless card would also work. Tethering with USB to a linux computer that you can edit the iptables rules would be best.
3.Double NAT. This is something you must avoid to have a proper connection. With wireless your tethering program is going to use NAT, but then your bridge will probably also use NAT. This will leave you with a very convoluted connection. Tethering with USB would probably also be best here. In the past when I have used USB tethering (motor razr) the host PC gets assigned the true WAN address of the phone via a virtual adapter. Thus this would only require setting up NAT/ iptables once on the host PC.
My suggestion would be to exchange the phone/plan for a 3g/4g data card that works with GNU/Linux and setup NAT that way of course along with an ethernet switch. Good luck with it.
Jason_25 said:
There are a few issues with this.
1.Restrictive firewalling policies on the ISP side. Blocked ports/ throttling.
2.Added latency from wireless > wireless bridge. With wireless you will need to tether to a wireless bridge with ethernet ports for your computers. wrt54g and the like with dd-wrt work fine for this. A linux computer with a wireless card would also work. Tethering with USB to a linux computer that you can edit the iptables rules would be best.
3.Double NAT. This is something you must avoid to have a proper connection. With wireless your tethering program is going to use NAT, but then your bridge will probably also use NAT. This will leave you with a very convoluted connection. Tethering with USB would probably also be best here. In the past when I have used USB tethering (motor razr) the host PC gets assigned the true WAN address of the phone via a virtual adapter. Thus this would only require setting up NAT/ iptables once on the host PC.
My suggestion would be to exchange the phone/plan for a 3g/4g data card that works with GNU/Linux and setup NAT that way of course along with an ethernet switch. Good luck with it.
Click to expand...
Click to collapse
But he would then be giving up unlimited data as a result of leaving the phone plans.
Sent from my Nexus S 4G using Tapatalk
I have searched this topic but they all centered on Macs or got off topic or someone gave an answer that didnt even solve the solution. So i thought i would ask myself. Is there any way to share my LAPTOPs wifi TO my DROID3???
http://bit.ly/uGGo0Q
to the poster above; i dont like smarta**es. my post said i already searched so if you found something then post a link.
to everyone else i want something via usb or bluetooth. preferably usb. i have googled it and all the results are either hardware specific, need unbunto [i have windows 7] or dont have a solution. If you ever owned a zune [who has? lol besides a few of us] or a windows phone, they can do it from stock.
__
I have a bluetooth usb adapter on my laptop I am not sure how it does it but it allows me to get online with my droid 3 via the bluetooth link, I click on connect via access point and it works. Sometimes it works and sometimes the signal gets killed, but try connecting through a bluetooth usb adapter.
I know you said preferably over Bluetooth or USB but have you considered trying something like a virtual access point for your PC? It would require WIFI but you could run a software app on your PC that broadcasts as an access point that you could connect to from your phone.
You have a phone that is wifi capable, but you want to thether to your pc to use the wifi connection.
Oh and I hate smartasses too.
*I love my Droid3..f'off Samsung Captivate*
bishop0114 said:
I know you said preferably over Bluetooth or USB but have you considered trying something like a virtual access point for your PC? It would require WIFI but you could run a software app on your PC that broadcasts as an access point that you could connect to from your phone.
Click to expand...
Click to collapse
i have looked at those, but i prefer usb because it does not affect the battery life of my laptop as much. thanks for the advice.
cappysw10 said:
You have a phone that is wifi capable, but you want to thether to your pc to use the wifi connection.
Oh and I hate smartasses too.
*I love my Droid3..f'off Samsung Captivate*
Click to expand...
Click to collapse
yes because my laptop has the intel ultimate 6300 wireless card. it can pick up alot mroe connecttins and connect to 5ghz. My droid3 cant pick up the connections i need. offer help or please stop commenting.
thank you to the rest of you for trying to help me solve this problem. I apprieciate it alot
enigmaco said:
I have a bluetooth usb adapter on my laptop I am not sure how it does it but it allows me to get online with my droid 3 via the bluetooth link, I click on connect via access point and it works. Sometimes it works and sometimes the signal gets killed, but try connecting through a bluetooth usb adapter.
Click to expand...
Click to collapse
do you know the name of the adaptor? this sounds perfect
ASUS bluetooth adapter I got it from meritiline a couple years ago, just been using it recently. And all I did was turn on the bluetooth on my phone and it worked, didn't download any software or anything.
That's funny as he'll.
Sent from my DROID3 using XDA App
Manic_Dragon said:
That's funny as he'll.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Your telling me I was just fooling around with my phone and laptop on day, and clicked on a link and boom I was online. I looked at my signal and was thinking "what the hell just happened?" lol
Ifnyou have windows 7 just install connectify
Google it (smartassingly probably just add a .com to that..)
It adds an AP virtual. That sjould not spend alot more of power as you have already wifi running.
Enviado desde mi DROID3 usando Tapatalk
If you laptop has Bluetooth (It should, I thought all Intel wifi chipsets in laptops were also Bluetooth) then what you want is a PAN "Personal Area Network". I thought the basic bluetooth stack in Windows supported this out of the box. (The Toshiba BT stack I used with Windows XP did, I don't know for sure about the MS BT stack in Windows 7 though).
Then you just turn on Internet Connection Sharing for you Wifi adapter to the Bluetooth PAN adapter.
Something like that anyway. I'm going from memory on the Windows side, and assuming the Droid 3 (etc.) supports PAN on its Bluetooth setup.
Doing it with USB though is trickier. On Windows 7, my ME863 appears as a network device with IP address, but I don't know if it'd work if I simply used ICS to share a link to the device because I don't know that the phone would be looking for a DHCP server. (It _is_ a DHCP server at this point)
Are you sure your not using the phones 3g or wifi. Did you try turnin on airplane mode and seeing if you still have internet
Sent from my DROID3 using xda premium
I just had a play, and I don't think my bluetooth solution is as easy as I'd hoped.
My Milestone 3 was able to join a PAN with my laptop and form their little adhoc network.
The best phone-side instructions I could find are at http://forum.xda-developers.com/showthread.php?t=666988 however a look around suggests that Windows 7 ICS won't let you share a network connection _to_ a BT network. I certainly couldn't see a way, although possibly it was because my phone is exporting a default gateway, rather than because of any inherent limitation of Windows.
It's a starting point, but not a particularly promising one. Whether ICS can be made to share Internet to the bluetooth PAN or not is really the only sticking point for "possible" versus "impossible" but a root-enabled App or possibly custom ROM would be needed on the phone to move from "possible" to "easy".
cappysw10 said:
You have a phone that is wifi capable, but you want to thether to your pc to use the wifi connection.
Oh and I hate smartasses too.
*I love my Droid3..f'off Samsung Captivate*
Click to expand...
Click to collapse
Stop posting
thank you all for all the help and feedback. im not sure if it was earlier in this thread, or another thread but someone gave me this link. and then i just saw it on the front page so i thought id post it here.
http://www.xda-developers.com/android/reverse-tethering-keeping-your-android-device-online/
its currently in development, i havent tested it on my phonhe. well i did and it said connected, but i couldnt tell if i was using 3g or not. but if any of you want to try it, give some feedback and once again thanks to you all !
TBBle said:
I just had a play, and I don't think my bluetooth solution is as easy as I'd hoped.
My Milestone 3 was able to join a PAN with my laptop and form their little adhoc network.
The best phone-side instructions I could find are at http://forum.xda-developers.com/showthread.php?t=666988 however a look around suggests that Windows 7 ICS won't let you share a network connection _to_ a BT network. I certainly couldn't see a way, although possibly it was because my phone is exporting a default gateway, rather than because of any inherent limitation of Windows.
It's a starting point, but not a particularly promising one. Whether ICS can be made to share Internet to the bluetooth PAN or not is really the only sticking point for "possible" versus "impossible" but a root-enabled App or possibly custom ROM would be needed on the phone to move from "possible" to "easy".
Click to expand...
Click to collapse
Can you/did you try setting up a network bridge w/the bluetooth adapter and whatever WAN you're using?
Willis111 said:
Can you/did you try setting up a network bridge w/the bluetooth adapter and whatever WAN you're using?
Click to expand...
Click to collapse
Just had a quick go, and it wouldn't bridge 'em.
http://social.technet.microsoft.com.../thread/84731dc8-0b23-433b-a58b-a0a2d41d93be/ suggests that a third-party Bluetooth stack would work though, just not the MS stack.
hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?
anyone?
dylansmith said:
hi guys,
i'm on the cm9 rom now and would like to make use of the "reverse tethering" app to leech my fast desktop connection via USB, so that i can sync files faster through dropbox.
to do that, i need to have USB tethering enabled on HP touchpad. would this be possible?
Click to expand...
Click to collapse
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
unfortunately, my pc does not have a wifi card
any other solution?
dylansmith said:
unfortunately, my pc does not have a wifi card
any other solution?
Click to expand...
Click to collapse
What exactly is your setup is your desktop connected by Ethernet to a wireless router, how is the tablet connected.
what is that you are trying to achieve, the more info you can give the easier it will be for me to replicate and hopefully come up with an answer.
regards
my hp touchpad can connect via wifi, but it's a lot slower than a wired connection. i want to try achieving FULL/near full speed download on my hp touchpad, by reverse tethering to the desktop's ethernet connection.
the desktop is connected to the wireless router through a powerline adapter, i.e. wired ethernet and is achieving full speed on its own.
One thing to note is that you'll not notice too big of a speed boost if you are connecting to the internet. The reason being, your ISP has a throughput speed of say 25 MBits a sec down and 5 up (In a hypothetical situation). Your wireless is usually up to 54 (on wireless G), and wired is either 10/100/1000 MBits. However, you are still throttled by your ISP, who runs at 25. So tethering via USB won't net you faster speeds to Dropbox, but it might for local network related things, like streaming from a local PC, transferring files, RDP, etc.
Just a thought to share, hopefully it helps.
Oh, and running through the power line like that is a messy way to do it. Home power is noisy and slows down your network speeds. Just sayin', I hope I don't offend.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
sstar said:
If your desktop is connected via Ethernet but has wireless capabilities there is an app for PC's called connectify that can make your PC a wireless hotspot .
Click to expand...
Click to collapse
I've always wanted to do that, thanks for telling about connectify
Sent from my cm_tenderloin using xda premium
bump
This is the thread that keeps coming up in google searches, and since it was never answered, figured its time for a bump.
I´m in a similar situation atm, Ive got no access to data or wifi as Im traveling abroad.
Cyber cafes abound, and id love to use this app as well, but.. i get the same error.
Im surprised as id assumed CM would have all such features builtin. No big that it doesnt, im just not sure how to add it.
Any help?
(and yes, ive tried to get the other method working, but having trouble getting adb to detect the tablet, that method works on my phone, but id prefer a method that fakes 3g, since that other method doesnt work with many apps)
The problem is the to connect anything to the TP USB connector and get it to work needs power injected into the interface (hence the need for Y cables when using an OTG cable). This ends up as so complicated, that most give up and decide to use WiFi tethering. Also, I am not sure anyone has found a way to get the necessary drivers into the kernel.