Running 4.3 with Sense 5.5, my HTC One never idles at UMTS (3G) when running in 'WCDMA Only' mode. The statusbar indicates the 'H' symbol while idling and connected to HSDPA in settings. This impacts my battery negatively, is there anyway to force to phone into UMTS when data transfer is completed?
Factory reset does not fix the problem.
Bump, in case no one saw!
This is controlled by the operator, not the phone
Sent from my HTC One using XDA Premium 4 mobile app
Pardon my ignorance, but what's the difference? Where I live (Australia), all 3 terms are interchangeable. Our 3G network is HSDPA.
How do you know there's a battery drain caused by this?
michom said:
This is controlled by the operator, not the phone
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I thought so too, but I've seen alot of my friends using the exact same plan with the same operator and still get the UMTS idle. This makes me believe the APN settings somehow affects the result? (Or SIM-card?)
@deeevan Before I purchased the One, I had the same phone as one of my friends (same data plan). I had HSDPA idle and he had UMTS. Simliar setup and my idle drain was not even close as good as his.
Related
Dear xda members,I love xda and I recently had purchased airtel 3g connection.
First I had issue connecting to 3g network.somehow I set the network to wcdma only and then dialed *#*#4636#*#* and set to wcdma only,there was still no network,then I turn of the radio and wow I had 3g signal and it was working fast.
But this morning when I woke up,my phone was in emergency signal mode.I tried the above steps but no success.
Anyone having same issue or know what's wrong with this.please share below.
Same issue in my nexus s with this airtel sim.
Sent from my Nexus S using xda premium
[email protected] said:
Dear xda members,I love xda and I recently had purchased airtel 3g connection.
First I had issue connecting to 3g network.somehow I set the network to wcdma only and then dialed *#*#4636#*#* and set to wcdma only,there was still no network,then I turn of the radio and wow I had 3g signal and it was working fast.
But this morning when I woke up,my phone was in emergency signal mode.I tried the above steps but no success.
Anyone having same issue or know what's wrong with this.please share below.
Same issue in my nexus s with this airtel sim.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
1. Set it on auto mode so in case you do not have signal on WCDMA it will switch to 2G
2. Also remember to add in apn settings for 3G data
kdagia said:
1. Set it on auto mode so in case you do not have signal on WCDMA it will switch to 2G
2. Also remember to add in apn settings for 3G data
Click to expand...
Click to collapse
I tried both wcdma and auto mode and my 3g setting is airtelgprs which is default.
Still I am having this issue.got 3g plan and Sim but giving me edge signal and speed.
Sent from my GT-N7000 using xda premium
[email protected] said:
I tried both wcdma and auto mode and my 3g setting is airtelgprs which is default.
Still I am having this issue.got 3g plan and Sim but giving me edge signal and speed.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
The above mentioned problem is ter in Airtel. Because 2G data pack customers are getting 3G speed too. Am in 2G Data plan and i get most of the times 3G Speed. They are working on it.
Just check out your SIM with other device, whether it having same behaviour or not? if yes call operator for same.
Once go to setting - wireless n network - mobile network - network operator - search n w8, when display all, select AIRTEL not airtel (capital letter)
dr.ketan said:
Just check out your SIM with other device, whether it having same behaviour or not? if yes call operator for same.
Once go to setting - wireless n network - mobile network - network operator - search n w8, when display all, select AIRTEL not airtel (capital letter)
Click to expand...
Click to collapse
I tried.my Sim on galaxy note.as.well as nexus s.and same.issue.No 3g signal,but my friends Sim is working perfect on both of my phone.
It's issue with Airtel not phone.I will try your suggestion.Thanks
Sent from my GT-N7000 using xda premium
1 more thing
try this *123*10#
*123*11#
if first(10) showing your a/c info, your service plan is 2G, if second(11) showing your a/c your service plan is 3G
dr.ketan said:
1 more thing
try this *123*10#
*123*11#
if first(10) showing your a/c info, your service plan is 2G, if second(11) showing your a/c your service plan is 3G
Click to expand...
Click to collapse
I have 1092.67MB 3G BALANCE ,still issue.
any other idea Dr.Ketan?
Sent from my GT-N7000 using xda premium
then you have to contact airtel, 1 posibility is there, may b your place have poor 3g coverage, so when it drops, it may get connected to 2G, which may be have good coverage at your place, Have you mark this happens to perticular place?
dr.ketan said:
then you have to contact airtel, 1 posibility is there, may b your place have poor 3g coverage, so when it drops, it may get connected to 2G, which may be have good coverage at your place, Have you mark this happens to perticular place?
Click to expand...
Click to collapse
Same 3g issue with Airtel Sim on every places in my town.It used to work great speed on first days that's why I recharged 10GB package.now speed is like snail even after seeing correct apn setting and making wcdma only.
Sent from my GT-N7000 using xda premium
[email protected] said:
Same 3g issue with Airtel Sim on every places in my town.It used to work great speed on first days that's why I recharged 10GB package.now speed is like snail even after seeing correct apn setting and making wcdma only.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
regarding the 10gb pack. you actually get only 5gb free. after that you're charged 3p/10kb for the remaining 5gb (upto a max shield of Rs.5000). after you reach this 5000 rupee mark which you will after usage of around 1.6gb, you will be pushed to an unlimited plan with a speed of just 20Kbps. there's no way to touch 10gb with such low speed. this is what is happening in bangalore. just correct me if i'm wrong.
---------- Post added at 11:43 AM ---------- Previous post was at 11:42 AM ----------
[email protected] said:
I have 1092.67MB 3G BALANCE ,still issue.
any other idea Dr.Ketan?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
your balance is just over 1gb. i guess your speed must be 20Kbps now..
anjath said:
regarding the 10gb pack. you actually get only 5gb free. after that you're charged 3p/10kb for the remaining 5gb (upto a max shield of Rs.5000). after you reach this 5000 rupee mark which you will after usage of around 1.6gb, you will be pushed to an unlimited plan with a speed of just 20Kbps. there's no way to touch 10gb with such low speed. this is what is happening in bangalore. just correct me if i'm wrong.
---------- Post added at 11:43 AM ---------- Previous post was at 11:42 AM ----------
your balance is just over 1gb. i guess your speed must be 20Kbps now..
Click to expand...
Click to collapse
I have recharged 10 GB airtel package for 1250 rupees and as I said it worked fine for one day in 3g speed but now it is slow as snail.slow both on my nexus a and galaxy note.
My reliance 3g sim is working fast now.
Went to airtel office for sim replacement and hope the issue will be resolved.
Sent from my GT-N7000 using xda premium
Got a replacement sim for 25rs from airtel and now my airtel 3g is working at full speed.hope it remain like this.
Thanks all for sharing informations.
Sent from my GT-N7000 using xda premium
hello
i've been googling this for a couple of hours now and i cant seem to find how to solve my problem
i was with my gf today, she has a S3. we are both connected to the same network operator. my signal was E , hers was H .. i went to system settings->about phone->status on both phones and compared signal strength and it was about the same.
my brother's iphone 4s almost always have much faster internet when i'm connected to edge (that means he's not on edge) - he's also connected to the same network operator.
its driving me crazy , why won't my cappy stay connected to hsdpa when its possible? how can i change that ? (WCDMA is preferred, baseband selection is automatic)
i'm using I9000XXJVT modem. was using slim bean rom 4.2.2 build 2.5 (now i'm on build 3) . unofficial semaphore kernel.
about my network operator technology from wikipedia (its a virtual operator):
"Its network is an HSPA+[citation needed] network in the 2100Mhz band, with roaming also available on Cellcom's 1800Mhz GSM[6] and 850Mhz/2100Mhz HSPA+ network."
any help would be appreciated.
The Captivate's Network Frequencies and Data Type: GSM Quadband:850/900/1800/1900MHz
UMTS Tri-band:850/1900/2100MHz
Sent from my SAMSUNG-SGH-I747 using xda premium
type *#*#4636#*#* in the dialer and then go to phone info, scroll down a little bit and you'll see it .. there is no UMTS there ..
i forgot to mention that I DO GET CONNECTED to hsdpa when there is good signal , but when there is low signal it switches automatically to edge , and i always thought thats normal and its ok , but today i got really surprised , 2 iphones + 1 sgs3 , that were on the same network operator were having much faster internet than i had. i had 2 E bars , the s3 had 2 H bars. and as i said before the s3 had just about the same signal strength (dBm and asu)
thanks for the reply though
Sounds like the iphone 4s and sgs 3 are probably connecting to the 4g network.
Sent from my SAMSUNG-SGH-I747 using xda premium
as far as i know there is no 4g in my country yet + the s3 is the international version so it doesnt support 4g anyway (im pretty sure its the same with the iphone)
Change your preferred network to GSM auto (PRL)
Sent from my SAMSUNG-SGH-I747 using xda premium
Open dialer *#*#2263#*#*
Then try desired band
Sent from my SGH-I897 using Tapatalk 2
Let us know what the results are for you after you change the preferred type to what i suggested in my previous post.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Change your preferred network to GSM auto (PRL)
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
it won't stick.. but anyway, i guess this is the opposite of what i want (i want H preferred over E) , or am i mistaken ?
pradeeppk said:
Open dialer *#*#2263#*#*
Then try desired band
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
my network provider supports hsdpa on 850 and 2100mhz and edge on 1800mhz, i still want the 1800mhz where there is no 850/2100mhz signal , but i want it to be 3rd priority (where 850 and 2100 are the first 2 priorities)
theoretically WCDMA preferred should do what i want , but its not. thats whats driving nuts..
thanks for the replies
oh man.. i said it myself , my network provider supports 850mhz .. i'm using i9000 modem , which doesn't support 850mhz hsdpa .. this could be it .. is there any way to check on which band i'm connected right now ?
EDIT: the answer is *#*#0011#*#* .. i'll check this out later when the scenario happens again, and i'll post results (i'm home now and i have full hsdpa signal here, so i cant investigate any further atm)
This is an ongoing gripe of mine. I'm wondering if it's just me or if other people have this problem. When I'm on 4g it intermittently turns off data for a few seconds. The 4g icon goes away and comes back a few seconds later interrupting my connection. Only happens on 4g. If I set the mobile network to just 2g or 3g I don't have this problem. I've tried lots of different modems. So I'm wondering if it's an Optus thing or an issue with my phone? ?
Sent from my GT-I9305 using xda app-developers app
nateboi81 said:
This is an ongoing gripe of mine. I'm wondering if it's just me or if other people have this problem. When I'm on 4g it intermittently turns off data for a few seconds. The 4g icon goes away and comes back a few seconds later interrupting my connection. Only happens on 4g. If I set the mobile network to just 2g or 3g I don't have this problem. I've tried lots of different modems. So I'm wondering if it's an Optus thing or an issue with my phone? ?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
probably poor coverage of 4G network
Why 4G when 3G is enough for watching video etc etc?
And it drain more battery also
hello5629 said:
probably poor coverage of 4G network
Why 4G when 3G is enough for watching video etc etc?
And it drain more battery also
Click to expand...
Click to collapse
I'm literally right next to a big city. Its not a coverage thing. If I have a 4g phone why not use it. I get about 24 hours of battery life from it so that's not an issue
Sent from my cm_tenderloin using xda app-developers app
I updated to 4.3 just now and my lte signal dropped to 1 to 2 bars, from a constant full bars. I noticed the performance is equal, meaning it may be just a difference in the sensitivity of the antenna's display of good signal however, it drops from lte a lot and stays in 3g. Has anyone verified the changes in the new modem? Any other bugs I should be aware on the 4.3 update? Also, Dashclock widget doesn't work on htc's widget lock screen.
Looks like before the bars were for voice and now they represent data. That's the way it is in AOSP.
Sent from my One using Tapatalk 4
I imagined since there were no changes in performance per se. I just wish I could restrict my one to lte only. Either 4g or no data.
Sent from my HTCONE using XDA Premium 4 mobile app
I work relatively close to a 4G LTE tower before updated it showed full 4G with fast speeds, now it shows little to no 4G and would switch to 3G. I tried to Factory Data Reset with PRL and Profile Update and still shows the same, and I'm running all stock no root, and I'm pretty sure it's not the tower.
Sent from my HTCONE using xda app-developers app
sincitycisco said:
I work relatively close to a 4G LTE tower before updated it showed full 4G with fast speeds, now it shows little to no 4G and would switch to 3G. I tried to Factory Data Reset with PRL and Profile Update and still shows the same, and I'm running all stock no root, and I'm pretty sure it's not the tower.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
So your on the updated prl (55016) then?
Sent from my HTCONE using Tapatalk 4
Yup..
Sent from my HTCONE using xda app-developers app
david279 said:
Looks like before the bars were for voice and now they represent data. That's the way it is in AOSP.
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
This is correct. You can verify this by connecting to wifi and then disabling mobile data. Your bars will instantly change.
I like this change. Now I can see that it is not possible to have more than 1 bar of 4G pretty much anywhere in my area. No wonder the speeds are so average and I almost never get 4G, the Sprint towers are all so far off the main roads that by the time the signal gets there it's weak. You can get full bars... if you drive up to the Sprint call center in Bristol, TN.
Before this change it was a lot harder to tell whether you were getting good 4G or 3G reception.
Edit: I just want to say that the reception itself is largely unchanged. When the phone goes from 4G to 3G, nothing will make it go back to 4G except toggling the data off and on.
Just to throw this in the mix. I live in an area that never had 4g but after this update I have it now. My signal strength also shows the one bar but coming from 3g only my connection now is 4g and has increased significantly. Maybe this new radio has a factor that extends the overall 4g coverage? I guess it could be just timing and 4g was opened up in my area but like I said I now have it after this update.
Does anyone have a issue while being on WiFi and the LTE is still being didplayed? My device does this is there a way to eliminate the LTE while being on WiFi?
Sent from my 831C using xda premium
nickhowell25 said:
Does anyone have a issue while being on WiFi and the LTE is still being didplayed? My device does this is there a way to eliminate the LTE while being on WiFi?
Sent from my 831C using xda premium
Click to expand...
Click to collapse
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Sim-X said:
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yea
LTE is built in to the SoC so when activated, it doesn't turn off. Unlike previous phones who had an external LTE radio, the battery usage is minimal. So overall you are saving battery. and true if you have weak or no LTE signal turning it off will help.
Sent from my 831C using xda app-developers app
drigout said:
LTE is built in to the SoC so when activated, it doesn't turn off. Unlike previous phones who had an external LTE radio, the battery usage is minimal. So overall you are saving battery. and true if you have weak or no LTE signal turning it off will help.
Sent from my 831C using xda app-developers app
Click to expand...
Click to collapse
SoC Im struggling to figure out what that means?
nickhowell25 said:
SoC Im struggling to figure out what that means?
Click to expand...
Click to collapse
SoC = System on a Chip so LTE, CPU, GPU, CDMA, 3G etc... Are all on 1 chip the Snapdragon 801. Older phones had separate components and used more power but the components could be turned off when not needed. When you are switching to CDMA only you are not just turning off LTE you are changing the core settings on the chip.
Sim-X said:
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I most definitely agree. I have an Airave at home and I have to manually switch to CDMA only while at home for the phone to connect to it. I have a very weak LTE signal so the phone automatically tries to connect to it. Very frustrating. Called airave supprt who said they are aware of the problem and are trying to work on a solution, but for now just manually switch to CDMA only when I get home.