[Q] HELP Galaxy s Advance Brick i9070 - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

HELLO team,
I need help, i have a samsung galaxy S Advance I9070, i have try to install rom thru ODIN but the when phone boot, i did not boot at all, now i cannot access the Recovery mode (Volumen Up + Home+Power) only let me go to the download mode (Volumen down+Home +Power) that the only option the phone stays in SAMSUNG GALAXY S Advance GT-I9070, please advice the steps to fix thix thru ODIN and please also the file, PIT
PDA
PHONE
CSC
file so tha i can try fix this please HELP ME THANKS !!!!!!

EJCH said:
HELLO team,
I need help, i have a samsung galaxy S Advance I9070, i have try to install rom thru ODIN but the when phone boot, i did not boot at all, now i cannot access the Recovery mode (Volumen Up + Home+Power) only let me go to the download mode (Volumen down+Home +Power) that the only option the phone stays in SAMSUNG GALAXY S Advance GT-I9070, please advice the steps to fix thix thru ODIN and please also the file, PIT
PDA
PHONE
CSC
file so tha i can try fix this please HELP ME THANKS !!!!!!
Click to expand...
Click to collapse
Hi, download a firmware here, extract the .tar.md5 file from downloaded zip then open Odin and press only "PDA" button, select extracted file, connect the device in Download Mode and press "START" button. Try if works in this way. Remember that if you have Jelly Bean installed you must reflash a Jelly Bean version.

thanksssss finally the phone restart !!! That wonder full now the touch screem is very very crazy i will like to now how to downgrade it to jb please !!!!

EJCH said:
thanksssss finally the phone restart !!! That wonder full now the touch screem is very very crazy i will like to now how to downgrade it to jb please !!!!
Click to expand...
Click to collapse
You mean to downgrade to GB? Here: http://forum.xda-developers.com/showthread.php?t=2100642
Sent from my GT-I9070 using Tapatalk

Thank, for the help but does the touchscreen have something to do, its work just that its move by itself sometimes......

EJCH said:
Thank, for the help but does the touchscreen have something to do, its work just that its move by itself sometimes......
Click to expand...
Click to collapse
Try to do factory reset from recovery.

shut_down said:
Try to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks so much but i try already I have no recovery install, recomendation for one ??? and how to install it thanks

EJCH said:
Thanks so much but i try already I have no recovery install, recomendation for one ??? and how to install it thanks
Click to expand...
Click to collapse
From stock one. You do have it.

help ??
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

what stock firmware version you mobile?jelly bean or gingbread?

smeth_90 said:
what stock firmware version you mobile?jelly bean or gingbread?
Click to expand...
Click to collapse
im not sure... its my girlfriends phone... i downloaded I9070XXLQE_I9070OXXLQE_HOME.tar from http://www.sammobile.com/firmwares/ and tried over Odin and that Fail msg keeps showing up. like i unplug phone. it just turns off and nothing.
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
smeth_90 said:
what stock firmware version you mobile?jelly bean or gingbread?
Click to expand...
Click to collapse
dont know if thats 4.1.2 or 2.3.6... is there a way to check what version is the firmware that i downloaded ? coz on that samsung site there is no version stated next to it :S

k,if u phone firmeware version before this use jelly bean, flash again stock firmeware jelly bean..try to search the jelly bean stock flashing firmeware..i hope this can help u..i also face the problem before this time..my phone stuck at logo..i flashing jelly bean firmeware..done..root,install kernal to overclocking..done..1.2ghz..

smeth_90 said:
k,if u phone firmeware version before this use jelly bean, flash again stock firmeware jelly bean..try to search the jelly bean stock flashing firmeware..i hope this can help u..i also face the problem before this time..my phone stuck at logo..i flashing jelly bean firmeware..done..root,install kernal to overclocking..done..1.2ghz..
Click to expand...
Click to collapse
which kernel did you flash???.....i have flash Cocore kernel but it's too battery draining kernel....

MR.Ro said:
which kernel did you flash???.....i have flash Cocore kernel but it's too battery draining kernel....
Click to expand...
Click to collapse
Use greenify and one power guard..no frill cpu is set cpu freq..not set for performance to avoid battery drain fast..
Sent from my SM-N9208 using Tapatalk

smeth_90 said:
Use greenify and one power guard..no frill cpu is set cpu freq..not set for performance to avoid battery drain fast..
Sent from my SM-N9208 using Tapatalk
Click to expand...
Click to collapse
Thanks dude.

Related

Help! Phone won't start!!

Hi all,
I was on the UK Stock 4.03 + Root....
I was trying to connect to a Blue-tooth Device today and the phone was frozen, so I turned it off....
When I tried to turn it back on...it won't go pass the "Samsang Galaxy Note" screen....(it would restart it self every time it reaches that screen)
I tried flashing it to the 4.0.4 German Stock via Odin...and the problem is still there....
is my phone BRICKED??
Please HELP~~!
THANKS!
Forgot to mentioned that when I was trying to reboot the phone for the first time....I had a USB Stick plugged into the phone...dunno if that was the cause of the problem
You said tried to flash 4.0.4, that is insufficient information
whether it was successfull or not?
do you rememeber wat exactly last msg ?
Did u try to completely remove the battery then reflash again stock ics through odin?
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Yeah...I did a flash of this Stock ROM "N7000XXLRG" from this page: http://forum.xda-developers.com/showthread.php?t=1424997.
The flash was SUCCESSFUL by Odin. However, When the phone rebooted after the flash the problem is still there (phone keep restarting once it reaches the "Samsung Galaxy Note" screen)
btw.. this is the log of the flash in Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> zImage
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Also...when I am trying to get into recovery mode....it shows the pic of the Android bot lying on the ground with a red triangle??
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
Thanks for your reply again....is there a SAFE instruction of how I can flash GB ROM by using Odin?
You meant a STOCK GB or CUSTOM one?
Does it matter if I flash the German one when I was on the UK one originally?
THANKS AGAIN
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok...downloading now....will let you know the result soon....THANKS
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
THANKS Doc.....by flashing the GB STOCK has solved the problem
How can I avoid this from happening in the future? Because I want to upgrade to ICS again
Final5k said:
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
Click to expand...
Click to collapse
No I didn't....where can I get that Kernel? and do I just flash it in CWM?
cheers for the suggestion
Congrats
It was likely to revive as i said it was seems to be a bootloop rather true brick
Dont worry it was just incidence, n not likely to repeat.
You can flash ics now safely. But first wipe cache and data before flashing ics if you have not perform it still.
Sent from my GT-N7000 using xda premium
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Final5k said:
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
so....
1. this kernel works with any stock ICS ROM?
2. Does it affect any performances....for example making the phone laggy?
cheers

galaxy note stuck at bootscreen

hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
vlxdxmxr said:
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
Click to expand...
Click to collapse
i was just playing a game from android market,
my phone has never been flashed everything was official and working well
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
MrPlox said:
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
Click to expand...
Click to collapse
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
letters_to_cleo said:
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
Click to expand...
Click to collapse
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
MrPlox said:
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
Click to expand...
Click to collapse
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
jonpaslim said:
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
Click to expand...
Click to collapse
Reflash ICS v4.0.4 its will improve the battery performance via pc odin
well i tried to flash another one but it gets stuck at NAND write and stays there
MrPlox said:
well i tried to flash another one but it gets stuck at NAND write and stays there
Click to expand...
Click to collapse
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
sahilarora2003 said:
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
Click to expand...
Click to collapse
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1810954
Follow Dr.Ketan guide,you will be fine...:good:
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
http://d-h.st/HJM
Flash it via PCODIN
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
It should not happen such with you...
If you are out of battery on official ROM, generally by getting it charged back can resolve the issue...
Try to recall, you must Gabe something else...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
Did get any help?
I have the same problem.
I wasn't using any custom rom
I have Galaxy Note N7000
i was running stock ICS 4.0.4 (open Germany) [N7000XXLRK_N7000DBTLRK_DBT]
My phone was rooted but with no custom binary counts.
I install beat audio driver and I count restart my phone. it was stuck on the samsung screen
I didnt have any back up so i tried to use Odin and re-flash my stock ICS firmware but its stuck at NAND write start!!!
I have read so many threads but it hasn't helped. it seems like almost everyone is using custom roms
i even got one binary count follow the tutorial on this thread after i flashed a kernel (4pda_kernel.tar) http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Ive also tried stock gingerbread still stock there..
My phone is able to enter recovery mode or download mode or stock in the samsung screen..
PLEASE can someone help with something that works..?
sahilarora2003 said:
http://d-h.st/HJM
Flash it via PCODIN
Click to expand...
Click to collapse
well imma try just flashing stock ics from dr Ketan right now and i'll let you guys know what the result is
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
MrPlox said:
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
Click to expand...
Click to collapse
Havent seen any update from u... have u managed to rectify the issue?
nokiamodeln91 said:
Havent seen any update from u... have u managed to rectify the issue?
Click to expand...
Click to collapse
no havan't been able to fix it yet it's a pretty tough issue, now i'm following a guide to completely repartition the phone cuz there might be a bad sector
Try re-flash back with PCODIN and once flashed and still stuck at 'samsung' boot screen, press vol up + home + power button and do a factory reset. Then reboot system/wipe data cache.

''firmware encountered an issue'' for galaxy note

Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..
SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe
Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((
where did it fail?
nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way
Done dude.. u r good to go now
Problem is solved
Thank you so much ''nokiamodeln91''
dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button
How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.

[Q] Galaxy Note doesn't go beyond logo and stuck at Downloading.. PLZ HELP :(

Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!
Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.
http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.
what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?
Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !
alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.
Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.
when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.
I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.
ThaiDai, please see my replies, I did as you requested..
Thanks
whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997
shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards

[Q] phone hanging at the start screen.

i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
saha.gobinda89 said:
i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Click to expand...
Click to collapse
if u r eble to boot u r phone in to download mode then its not being bricked i think u r not flashed file properly
Step-1: Download Android Jelly Beanofficial firmware for Samsung Galaxy S Advance to the computer
Step-2: Extract the downloaded zip file using Winzip, Winrzr, 7zip or any other extracting tool to get a file with .tar.md5 extension
Step-3: Download latest Odin software which will help to install the Jelly Bean firmware. Extract the Odin zip to getOdin exe
Step-4:Switch off the Galaxy S Advance and wait for five to six seconds for the vibration to confirm the power off
Step-5:Boot the phone into Download Mode by pressing and holdingVolume Down,HomeandPowerbuttons together. A warning screen will appear, now press theVolume Upbutton to continue to enter into Download Mode
Step-6:RunOdin.exe as an Administrator
Step-7:Connect the Galaxy S Advance to the computer using USB cable while the device is in Download Mode. Wait for some time until Odin detects the device. When the device is connected successfully, an Added message will appear under Odin. Also, the ID: COM box in Odinwill turn blue indicating all the drivers are installed successfullyNote:If theAddedmessage does not appear, then try the USB port at the back of the computer. In case Odin still fails to recognsie the device, then re-install USB driver.
Step-8:Click thePDAbutton and select the (tar.md5 file)
step-9: Verify that Auto Rebootand F.Reset Timecheckboxes are selected in Odin window. Also, ensure that the Re-Partition option is unchecked
Step-10:When everything is set, hit theStartbutton in Odin. The installation process should begin now and would take few minutes to complete
Step-11 once the installation process is completed, the phone will reboot automatically. And soon a PASS message with green background will appear in the extreme left box at the very top of Odin indicating successful installation.
phone get rebooted with samsung logo
Now safely unplug the USB cable from the phone to disconnect it from the computer
How to Fix Bootloop Issues
1) While installing the firmware if thePASSmessage does not display or the device gets stuck for a long time, then disconnect the phone from the computer. Remove the battery and re-insert it, check the USB connection, re-install the USB driver and disable KIES. Enter Download Mode and repeat the whole procedure.
2) If bootloop occurs or the device is stuck in welcome screen logo, then boot the phone into recovery mode. To do so, press and hold theVolume Up,HomeandPowerbuttons together. In recovery mode, perform data wiping task by selectingWipe data/factory resetthen selectWipe Cache Partition.Reboot the phone in normal mode by selectingreboot system now.When the phone boots up, it should be running on the official build. In recovery mode, useVolumekeys to scroll between the options and use thePowerbutton to select the particular option. Performing wiping task will erase the internal memory of the device.
Just flash firmware with odin, after it says "pass", remove cable and let your device boot and mostly (a.f.a.i.k) it doesn't boot, take out battery, go to recovery mode and wipe data/factory reset and after that reboot your phone.
sent with my S Advance
nalityta collect
Thank you very much my phone is now okay.......:laugh::good::angel:
saha.gobinda89 said:
Thank you very much my phone is now okay.......:laugh::good::angel:
Click to expand...
Click to collapse
just press thnx button if u can
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
saha.gobinda89 said:
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2096093
dimentl under
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
saha.gobinda89 said:
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
Click to expand...
Click to collapse
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
i don't understand what you say plz give me better solution for this.....
saha.gobinda89 said:
i don't understand what you say plz give me better solution for this.....
Click to expand...
Click to collapse
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
TPD-21 said:
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
Click to expand...
Click to collapse
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Sorry I'm late replying. Yes, do as senior @shut_down mentioned above.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
Sent From Glonass Satellite
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
kitkat install
shut_down said:
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
Click to expand...
Click to collapse
please give me download link CM11 or kitkat 4.4.2 install software.
saha.gobinda89 said:
please give me download link CM11 or kitkat 4.4.2 install software.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2578599
thanks
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
Thanks Man....
Kitkat rom
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
saha.gobinda89 said:
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
Click to expand...
Click to collapse
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
looking for kitkat
shut_down said:
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
Click to expand...
Click to collapse
where i looking.... give me download link...

Categories

Resources