Related
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
exconvictriddick said:
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
I have this one
http://www.ebay.com/itm/251175458354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Protects the front good...the back...not so much. Not sure on the slim case question. Love mine though
exconvictriddick said:
Does your metal bumper case have a slight raise from the side to prevent scratches to both front and back especially the camera lens?
Do you think it would fit with a slim case?
Please post a link where you bought it.
Thank you very much and pardon my engrish!
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
If you worry about the back, maybe you can just buy a spare battery cover from eBay. I got 2 and they are about 8 dollars each and they are both with nfc
Sent from my GT-N7100 using xda premium
Twistedchild420 said:
I have this one
http://www.ebay.com/itm/251175458354?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Protects the front good...the back...not so much. Not sure on the slim case question. Love mine though
Click to expand...
Click to collapse
hi twisted.
do u see your wifi and cellular signals going weak with the bumper installed?
thanks.
Have the same one. And internet was not effected. Played YouTube in HQ while browsing Facebook and instagram AT DA SAME DAMN TIME while at work (no wifi) 4g all day baby I love it
Sent from my SGH-T889 using xda premium
Insane Devil said:
hi twisted.
do u see your wifi and cellular signals going weak with the bumper installed?
thanks.
Click to expand...
Click to collapse
I bought one a couple of weeks ago. I think the aluminium case gives good screen protection, but although it is reasonably low profile the few millimetres each side do seem to make the Note 2 feel much bigger. I personally don't think it's the most elegant case, they look OK from the front, but the back doesn't seem to follow the flow of the stock battery case too well.
Don't get me wrong, the phone fits in perfectly without any movement but not my cup of tea. I lose one bar on the phone signal when the case is on, NFC is fine.
Possibly a like or hate accessory!
Thanks for all the replies. That was my main concern. I wanted a metal bumper case that has a slight rise to protect the camera lens. I'm going to buy a ballistic 3 layer protection case since GN2 can be easily damage even at waist height drop.
Why ballistic? Because its relatively cheap, unlike otterbox and offers awesome drop protection. Had one for E4GT and money worth spending.
Thanks again.
Sent from my SPH-L900 using xda premium
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846
i use that one. slight raises on the front and back to protect the camera. It adds a little weight to the phone but its not unbearable. I actually like it. I also got the armror suit military shield screen and back protector. Screen protector was not compatible with the case, cause when I removed the phone from the case, the sliding portion of the front peeled the screen protector off. and the added thickness of the armorsuit full body protector makes it very snug in the case. probably the reason why it the screen protector peeled off as I was trying to remove it.
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper and getting this battery cover:
http://www.ebay.com/itm/Luxury-Alum...3?pt=PDA_Accessories&var=&hash=item416e17add9
rubberwheels said:
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper and getting this battery cover:
http://www.ebay.com/itm/Luxury-Alum...3?pt=PDA_Accessories&var=&hash=item416e17add9
Click to expand...
Click to collapse
The battery door has no NFC
Paradaz said:
I lose one bar on the phone signal when the case is on
Click to expand...
Click to collapse
Could this be the back or the bumper causing you to loose a bar?
rubberwheels said:
http://www.ebay.com/itm/New-Metal-A...698003?pt=PDA_Accessories&hash=item3f1efae213
You think i should spend a little more or does this look good?
I plan on getting that bumper
Click to expand...
Click to collapse
I purchased this exact bumper and think it looks great. Does add a little thickness to the sides but feels protected.
JosephL said:
Could this be the back or the bumper causing you to loose a bar?
Click to expand...
Click to collapse
The bumper in my experience is causing a loss of one bar. I'm in good coverage areas or around WIFI constantly so no big deal for me.
Sent from my NOTEworthy smartphone
Here are the ones I was looking at. I think I like the polished chrome one the best.
http://www.casefanatic.com/samsung-...-galaxy-note-2-n7100-metal-bumper-frame-case/
these bumper cases, esp the metal ones.. are they easy to remove/replace? As a frequent traveler, I switch batteries every night to make sure that i'll always have a fully charged spare.. I'd hate to use the bumper case where you need a small screw to open (i think I saw a bumper case like that once).
mobilebuddha said:
these bumper cases, esp the metal ones.. are they easy to remove/replace? As a frequent traveler, I switch batteries every night to make sure that i'll always have a fully charged spare.. I'd hate to use the bumper case where you need a small screw to open (i think I saw a bumper case like that once).
Click to expand...
Click to collapse
I ordered one off ebay that doesnt require screws. The front plate slides on/off and very easy to take the phone out of the case if needed.
Sent from my NOTEworthy smartphone
K.0.0.L. said:
The battery door has no NFC
Click to expand...
Click to collapse
I believe someone also tried to put on the NFC on the metal door and it still did not work FYI.
Other then that, I love my metal door
aeo 37 said:
I believe someone also tried to put on the NFC on the metal door and it still did not work FYI.
Other then that, I love my metal door
Click to expand...
Click to collapse
Where'd you buy yours? I'm looking for a coffee colored metal door.
If theres any UK users in this thread that wants a black aluminium bumper for free then let me know and PM me your address. I bought one to try along with a selection of cases but am unlikely to use it. Its a great fit for the phone and is a screwless design.......the front plate slides up and snaps into place. I bought it from the link below.
http://www.ebay.co.uk/itm/271098171...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Sent from my GT-N7100 using xda premium
I think I would be worried about the sliding piece scratching the glass. Is there any problem with this? Also, what kind of padding is on the inside rim?
jessecoleman said:
I think I would be worried about the sliding piece scratching the glass. Is there any problem with this? Also, what kind of padding is on the inside rim?
Click to expand...
Click to collapse
Got mine yesterday, I haven't noticed any scratching yet, so I'm pretty sure it's fine.
Sent from my GT-N7100 using xda premium
I've got the Case-Mate Tough Case and even though it has the little bump pattern on it it's way too slippery... it's not rubbery feeling like it looks in the pictures...
And I've spent the better part of a week reading reviews and searching and can't find a good answer... So what's the best case for GRIP? Preferably it should give decent protection, not be too big (I don't want something like the huge Otterbox or Seidio Active) and have a lip on the front to protect the screen.. other than that I just want it to actually be GRIPPY!!! This phone is huge (it's awesome, but huge) and I really need some grippiness on the back so that I can one-hand it... I've looked at the Aegis, Ballistic, UAG and others but there are mixed reviews as to the actual feel of the outside. I want something that I can lay it in my hand at a slight angle and it won't just slide off... The Case-Mate really checks all the boxes except for the fact that it's just so dang slippery!!
So if you've personally got a case/used one that you find exhibits exceptional "grippability" then toss a dog a bone and hook me up..
Thanks everyone..
(and if you're in the market for a Case-Mate Tough case then I'll make ya a deal....although it's prolly not worth the shipping..lol)
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
IamPro said:
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
Click to expand...
Click to collapse
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
PM me if you really want the Case-Mate, I'll prolly keep it until I find something better though, it's slippery but at least it's protected when it falls.. And yeah, I had a Fly Grip, but I made the mistake of selling it with the phone I had at the time, plus I pocket this slab of a phone and I'm not sure I could handle the extra bump on the back...
No rush I'm just a case hoarder lol. If you find something else hit me up.
Sent from my SCH-I605 using xda premium
Will do buddy....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Optimistic Pessimist said:
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Click to expand...
Click to collapse
One of the few that's actually described as being grippy, that may be the ticket... haha.. thanks
Sent from the future.....
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Phogg said:
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Click to expand...
Click to collapse
I went ahead and got a cheapo rubber/silicone case from Ebay.. I figure I can't go wrong trying it when it cost <$6 shipped...
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
I just got this one off ebay I like it so far the black lines are the grips lol.
Sent from my SPH-L900 using xda app-developers app
UCSB said:
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
Click to expand...
Click to collapse
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
ericrangel76 said:
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
The best grippy case and most protective case you will find is I Face case
Sent from my SGH-I317M using xda premium
blakjak220 said:
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
Click to expand...
Click to collapse
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
blakjak220 said:
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Click to expand...
Click to collapse
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
ericrangel76 said:
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I honestly prolly wouldn't use the kickstand that much either... but it's good to know that it's probably not as bad as some of the reviews..
UCSB said:
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
Click to expand...
Click to collapse
That looks pretty good.. may have to get one if that one from Ebay turns out to be crap..
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
blakjak220 said:
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol.
Click to expand...
Click to collapse
I actually meant (egrips) since I had seen it recommended in another thread here
Hopefully this might be some help
I've tried to find reviews for the pro case that motorola is offering, but I haven't had any luck.
Any ideas as to what is the best option out there for our phone while keeping the good looks?
Sent from my XT1058 using XDA Premium 4 mobile app
I haven't gotten it yet, but I've been a Diztronic fan for a few years (and a few phones) now. TPU just gives it a little extra distance between the face-down screen and the tile when I accidentally drop it.
Incipio dualpro shine case looks super slick on it got it off amazon and it looks amazing
Sent from my Moto X (XT1058) using XDA Premium
Keller_psycho said:
Incipio dualpro shine case looks super slick on it got it off amazon and it looks amazing
Sent from my Moto X (XT1058) using XDA Premium
Click to expand...
Click to collapse
Could you post a picture? When I buy the developer edition I plan on buying the dualpro matte/grippy case.
Sent from my Galaxy Nexus using Tapatalk 4
I have the diztronic, the tudia melody (POS) and the griffin reveal. I only use a case while working. The griffin is easily my favorite, but the diztronic is very nice for a TPU case. Stay away from the tudia.
Any of those cases attract lint from pockets?
Sent from my XT1060 using XDA Premium 4 mobile app
Neither the diztronic or the reveal collect lint. Wouldn't know about the tudia because it was only on my phone for 3 seconds before I vowed to never use it gain.
Well, whatever the case I'm getting something. Thank God motorola screwed up and sent me two phones and I was honest and sent one back, because I dropped mine and cracked the screen.! out of courtesy motorola is replacing mine free of charge so the new one will be in a case regardless.
Sent from my XT1058 using XDA Premium 4 mobile app
bought an otterbox for mine and love it
Sent from my XT1058 using XDA Premium 4 mobile app
Poetic atmosphere finally shipped. I'll post pictures when I get it
gunnyman said:
Poetic atmosphere finally shipped. I'll post pictures when I get it
Click to expand...
Click to collapse
Yep, just got my shipping notice too!
I ended up with Cimo Motorola Moto X Back Case Flexible TPU Cover since I went with a black back. I picked it up on Amazon. I went with black, but it also comes in blue, red, clear, pink, purple, and white. The only complaint I have about it is there is no holes for the power and volume so it hides the customized buttons. Instead the buttons are part of the case. My solution was to just cut the holes. If done right you can't even tell.
I got the snap case from Motorola because I saw the review videos and it looked nice. I got it in the smoked clear color. 3 problems. 1st is price. $30 is a lot for what you are getting here. Not a whole lot of protection but enough for peace of mind. 2nd is that whatever coating they put on this thing is slippery as hell and it hasn't been mentioned in any of the reviews I've seen so far. It actually makes it uncomfortable to use one handed because you have to grip it so tightly. 3rd is that when I normally hold a phone one handed I put my pinkie under the bottom to stabilize the phone. On this case there are sharp edges where it opens up around the charging port right where I would normally put my pinkie. For something this much I would've expected little things like this to have been taken into account. It does fit the phone really well and doesn't add a whole lot of bulk which is what I was looking for.
_MetalHead_ said:
Neither the diztronic or the reveal collect lint. Wouldn't know about the tudia because it was only on my phone for 3 seconds before I vowed to never use it gain.
Click to expand...
Click to collapse
What is it about the tudia you dont like?
Sent from my Motorola Ghost
matt99017d said:
I've tried to find reviews for the pro case that motorola is offering, but I haven't had any luck.
Any ideas as to what is the best option out there for our phone while keeping the good looks?
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I actually use the pro shell case from Motorola, it's been pretty good so far. Feels good in hand and the rubberized edge covers the entire edge of the phone. The phone fits nicely in the case and it doesn't add any bulk to it. I'd suggest it over the snap case that they are offering on their site.
i bought http://www.amazon.com/gp/product/B00DMOV802/ref=oh_details_o00_s00_i02?ie=UTF8&psc=1 and i love it. it has a kickstand which is the main reason for buying it. it offers easy of use. you can take it off and on easily and the rubber case isnt the sticky rubber that seems to pull your pocket out everytime you take your phone out.
Infekxion said:
What is it about the tudia you dont like?
Sent from my Motorola Ghost
Click to expand...
Click to collapse
It's ugly, feels bulky compared to the Diztronic TPU case, and just has a very cheap feel to it. I only ordered it because it looks like the Incipio Frequency case that I had for my iPhone (it's a blatant ripoff) but it is nowhere near the quality. If you are looking for a decent TPU case, the Diztronic is the way to go.
_MetalHead_ said:
It's ugly, feels bulky compared to the Diztronic TPU case, and just has a very cheap feel to it. I only ordered it because it looks like the Incipio Frequency case that I had for my iPhone (it's a blatant ripoff) but it is nowhere near the quality. If you are looking for a decent TPU case, the Diztronic is the way to go.
Click to expand...
Click to collapse
I bought the dizronic before the X was available, love it but it doesn't play nice with the skinomi I have on. Thanks for helping me keep my pile of unused cases from getting any bigger.
Sent from my Motorola Ghost
Infekxion said:
I bought the dizronic before the X was available, love it but it doesn't play nice with the skinomi I have on. Thanks for helping me keep my pile of unused cases from getting any bigger.
Sent from my Motorola Ghost
Click to expand...
Click to collapse
That's what I'm here for. Anyone who knows me here knows I have a problem with cases. I already have 5 for the Moto X, and I have a few more on order. The funny thing is, I really don't like using a case with this phone so I have no idea what drives me to keep buying them haha. I had 30+ for my iPhone, about the same for my One X, maybe 25 for my HTC One.... yeah. haha
If you want to get a really good case, help me pester Urban Armor Gear into making one for us. Best case on the market, hands down. Post on their FB wall about making a case for the Moto X. https://www.facebook.com/UrbanArmorGear
Has anyone who has gotten a case noticed a change/muffling in the rattling sound that seems to occur when the phone vibrates? I'd be interested in knowing if having a case on it somehow minimizes the sound in anyway.
I am a case hater(screen protectors too). I never had a case on any of my 50+ smartphones for the past 4 years. Every case I buy will have something that turns me off or disappoints me. After several days of use. I take it off and never put it on. It is clearly waste of money and no protection at all for the phone. Recently I cracked 2 of my phones(Note2 and G2). And decided that I will have a case. I got quick window which is ok but adds some bulk and not comfortable to use.(flip part gets in a way)
For the past several years 1 case got my attention. Ringke slim for iphone 5. http://www.amazon.com/Release-Premi...ie=UTF8&qid=1385245025&sr=1-1&keywords=ringke it was for my wife's iPhone5. (i am an iphone hater too ) it is the slimmest and most comfortable case I have ever used on any phone.(dont bring out your pitch forks and torches, it is my personal opinion)
Now that company started making cases for LG G2. http://www.amazon.com/RINGKE-PERFEC...UTF8&qid=1385245039&sr=1-1&keywords=ringke+g2
I just ordered mine and will wait to see how the quality and the comfort is.
I wanted to ask if anyone has used this case for G2 and how is the experience?
I hope somebody will benefit from this post.
Looks like that particular one only works the international variant.
I wonder how much protection it actually provides in a fall. Looks pretty sweet, though.
I had one for my g-nex and I loved it. It is very slim. It stinks they don't have a version for the Verizon g2 or I would get one.
Sent from my VS980 4G using xda app-developers app
rebelx said:
Looks like that particular one only works the international variant.
I wonder how much protection it actually provides in a fall. Looks pretty sweet, though.
Click to expand...
Click to collapse
Actually that info is wrong, they say its for the international but its actually for the 8.9mm phone which is T-Mobile/Sprint
mharp10 said:
I had one for my g-nex and I loved it. It is very slim. It stinks they don't have a version for the Verizon g2 or I would get one.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah I had case from Ringke for my Galaxy Nexus too...So I email Ringke...and they told me right now they have no interest on making a Verizon Variant for the G2 case...Sad.
Ah that sucks I would have really liked one for my g2. I remember with the g-nex enough people emailed them for a extended battery version and they actually made one. I guess that was a little different though. G-nex was a much bigger community though.
Sent from my VS980 4G using xda app-developers app
mharp10 said:
Ah that sucks I would have really liked one for my g2. I remember with the g-nex enough people emailed them for a extended battery version and they actually made one. I guess that was a little different though. G-nex was a much bigger community though.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah...If Verizon just kept the original model then it would been better. More choices for accessories..
I had a Ringke Slim on my Galaxy Nexus. Loved the slim profile BUT the plastic is cheap, on my GNex model, it started getting hairline cracks on all 4 corners. This was common. Ringke shipped out replacements but the replacements did the same thing.
Since them I moved on to CaseMate Barely There and the Incipio Feather.
Out of the CaseMate and Incipio, I found the Incipio to have the overall high quality award with it's super slim profile, nice soft matte feel, and super high durable plastic that is solid all the way though (not painted like Ringke).
I put an Incipio on my womans iPhone 4 and fell in love with it. Since then I've ordered me one for my old Galaxy Nexus and have a new one on my G2.
Thats my personally recommendation of all time favorite slim cases, and I've probably been there and tried them all.
Thanks for the recommendation. I will have to try one out!
Sent from my VS980 4G using xda app-developers app
I got the Poetic Palette case. It just like the Incipio Feather but I got it cause of the 3yr warranty and it cost less. Nice rubber-like feel to the back. People that see the phone think the case is the official back of the phone and love it.
http://www.amazon.com/gp/product/B00E5NP1KC/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1
Better reviews than what the OP posted, if anyone wanted something to compare to.
Poetics 3yr warranty is freaking awesome but I've found their cases on the cheap side. The good side is you just email them and they send you a new one.
I haven't tried the poetic palette. Looks good. Hopefully its isn't painted like most.
-sent from my LG G2 using XDA Premium 4
The Poetic Palette case seems pretty hard for a slim case. It feels just a few mm thinner then a credit card but really hard. Not that it bothers me, but the case is hard to take off once you get it off. You have to take one corner off first, then the rest; I like that. Makes me feel that a fall won't just make the case come right off. Oh and it has that low profile when face down that you can barely see the glass isn't resting on the surface. Also gives you just enough clearance that the camera lens and power button aren't touching the surface too. Over all just happy with it so far
player911 said:
Poetics 3yr warranty is freaking awesome but I've found their cases on the cheap side. The good side is you just email them and they send you a new one.
I haven't tried the poetic palette. Looks good. Hopefully its isn't painted like most.
-sent from my LG G2 using XDA Premium 4
Click to expand...
Click to collapse
The palette case is either the soft touch feel (which i personally hate) or the "quiksand" texture. I would recommend the sand one personally.
player911 said:
I had a Ringke Slim on my Galaxy Nexus. Loved the slim profile BUT the plastic is cheap, on my GNex model, it started getting hairline cracks on all 4 corners. This was common. Ringke shipped out replacements but the replacements did the same thing.
Since them I moved on to CaseMate Barely There and the Incipio Feather.
Out of the CaseMate and Incipio, I found the Incipio to have the overall high quality award with it's super slim profile, nice soft matte feel, and super high durable plastic that is solid all the way though (not painted like Ringke).
I put an Incipio on my womans iPhone 4 and fell in love with it. Since then I've ordered me one for my old Galaxy Nexus and have a new one on my G2.
Thats my personally recommendation of all time favorite slim cases, and I've probably been there and tried them all.
Click to expand...
Click to collapse
had the same experience with ringke on gnex. so cheap. had frustrating time dealing with their customer service too.
liking the palette currently buy,ill probably give incipio a try at some point
Sent from my VS980 4G using Tapatalk
player911 said:
I had a Ringke Slim on my Galaxy Nexus. Loved the slim profile BUT the plastic is cheap, on my GNex model, it started getting hairline cracks on all 4 corners. This was common. Ringke shipped out replacements but the replacements did the same thing.
Since them I moved on to CaseMate Barely There and the Incipio Feather.
Out of the CaseMate and Incipio, I found the Incipio to have the overall high quality award with it's super slim profile, nice soft matte feel, and super high durable plastic that is solid all the way though (not painted like Ringke).
I put an Incipio on my womans iPhone 4 and fell in love with it. Since then I've ordered me one for my old Galaxy Nexus and have a new one on my G2.
Thats my personally recommendation of all time favorite slim cases, and I've probably been there and tried them all.
Click to expand...
Click to collapse
I want the Feather for my Sprint variant but all they "officially" have is the Feather Shine, which is too slippery for me. I see that they make a Feather for AT&T and Verizon. I'm assuming that I can't use the VZ, but can I buy the AT&T version for my phone.
By the way, +1 on the Ringke cheap plastic. I had the exact same case for my Gnex and while I liked it, I got the four corners cracking too.
Yea you CAN'T use the Verizon one because the Verizon one has smaller buttons. I can CONFIRM that my Verizon one, the button cut out is curved for the smaller buttons.
You CAN use the one for the AT&T version or other. I'd probably just pick them on from Amazon. All the G2's are exactly the same with the exception of the Verizon buttons. Verizon really screwed up changing those. I not only like the look of the standard buttons better but I also think it would be easier to use. Different topic though.
player911 said:
Yea you CAN'T use the Verizon one because the Verizon one has smaller buttons. I can CONFIRM that my Verizon one, the button cut out is curved for the smaller buttons.
You CAN use the one for the AT&T version or other. I'd probably just pick them on from Amazon. All the G2's are exactly the same with the exception of the Verizon buttons. Verizon really screwed up changing those. I not only like the look of the standard buttons better but I also think it would be easier to use. Different topic though.
Click to expand...
Click to collapse
So I ordered the Feather AT&T version for my Sprint version and it's not a great fit. It's loose in there. I have the Feather Shine made for Sprint and it's a snug fit. The Feather is a bit wobbly. So, the search continues.....
esoh said:
So I ordered the Feather AT&T version for my Sprint version and it's not a great fit. It's loose in there. I have the Feather Shine made for Sprint and it's a snug fit. The Feather is a bit wobbly. So, the search continues.....
Click to expand...
Click to collapse
Just put a piece of cardstock or thin cardboard... or does it wobble side to side?
-sent from my LG G2 using XDA Premium 4
http://gstylemag.com/2014/04/04/htc-one-m8-incipio-dualpro-shine-case-review/
Had a chance to use the DualPro Shine case on the HTC One M8. I like the fact it still gives the M8 that gunmetal metallic look even when covered. Its not the exact same color but its not bad. It gives the M8 a better grip then the actual phone itself. It can take a bit trying to pry the cover off. I did a full review on it if you want to check the link as well.
JMillion said:
http://gstylemag.com/2014/04/04/htc-one-m8-incipio-dualpro-shine-case-review/
Had a chance to use the DualPro Shine case on the HTC One M8. I like the fact it still gives the M8 that gunmetal metallic look even when covered. Its not the exact same color but its not bad. It gives the M8 a better grip then the actual phone itself. It can take a bit trying to pry the cover off. I did a full review on it if you want to check the link as well.
Click to expand...
Click to collapse
I have this just not the shine but same thing, just plastic i guess? Actually only complaint i have is there is hardly any grip to it and i have the plastic. If this backing is smoother as it looks in pics i would think the grip would be bad as well if not worse. I'm saying when your hands are sweaty/wet there's no grip, gotta hold on tight with this case!
I remember with the M7 version of this case, there would be a noticible impact on reception. Once you removed the case the phone would function normally. Did you see any of that when using this case?
Sent from my HTC One using xda app-developers app
jaggrey said:
I remember with the M7 version of this case, there would be a noticible impact on reception. Once you removed the case the phone would function normally. Did you see any of that when using this case?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i haveent notice problems with reception
Any issues with the flash in low light with this case?
jaggrey said:
Any issues with the flash in low light with this case?
Click to expand...
Click to collapse
I just bought this case, and I love it and dislike it. Great quality but if you are looking for complete anti-slip form the OEM design of the phone, this is not the case. It has slipped out of my hand due to the metal twice. I was hoping this wouldn't be the case, but im giving it a week . Overall look and protection is great though.
There are no issues with flash on this, or reception, or the IR blaster.
I got the red one from Verizon looks and feels amazing
I have the same one, and while it is a great case it is very slippery. Going to look for.something with better grip.
Sent from my HTC One_M8 using Tapatalk
grneyez said:
I have the same one, and while it is a great case it is very slippery. Going to look for.something with better grip.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I had the same case, except in black and gray, not the shine version, but otherwise the same case. Really good protection and fit, phone feels solid in there. But the black one had about zero grip to it as well. It's sort of soft touch coating, but more plastic feeling than rubbery. Also had a slight texture to it. After a week, returned it to the store... Was also considering the shine, but seems like it's just as slippery if not more so. :/
hi everyone,
if anyone has a spare Incipio dual pro shine to get rid of, I'd be glad to exchange it with one of my UAG cases (I can give away both black or transparent versions). Good condition, no trace of use.
PM me if you're interested. Thanks!