Database Develop

Cannot charge with wall outlet

Recently my X1 cannot be charged with USB cable through wall outlet & even car charger , but able to charge with USB cable through PC.
Anyone do encounter the same problem?

Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.

paul c said:
Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.
Click to expand...
Click to collapse
I do agree with you. Charging with wall outlet is faster. Therefore, normally I'm charging my X1 with wall outlet, unless in office, will use PC USB.
Top bar never show charging icon, but once I charge it with PC USB, the charging icon show up immediately.
It seems like no power for the USB when connected to the wall outlet. I've tested with battery removed, plugged in USB cable connected to wall outlet, there is no charging illumination light. I cannot power on it.
I tried to recall, it happened after I used a USB charger for my MP3 player. The next day, when I tried to charge with car charger. To my surprise, the USB connection notification showed up (I do remember, while charging with wall outlet or car charger, it will never prompt me for USB connection).

I don't think, it is the ROM issue. Try a few ROM still having the same problem.
From now, I got to live with PC USB :|

X1 Charging problem
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.

torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse
let's me try with power off charging with wall outlet

well thats why se said USE only original accessories...you need to change the power ic on the board.

donottouch said:
well thats why se said USE only original accessories...you need to change the power ic on the board.
Click to expand...
Click to collapse
will the SE service centre entertain changing 'power ic'?

make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem

nguyennghiep said:
make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem
Click to expand...
Click to collapse
I'm using the original SE charger!? I would not think the problem with the charger, but my X1 was screwed by the incompatible MP3 USB charger

Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse

digitalspree said:
Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
Click to expand...
Click to collapse
it's not caused by the ROM, I'm very sure. I've installed different ROM. The problem still exist.

I am having a similar problem. When the phone completely discharges , i am unable to charge it with any power adapter or even car charger. I have to initially charge the phone using a PC , then after the power is around 15% , then the phone gets charged with a normal adapter.. any suggestions??

same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally

I had a similar problem twice.Both times I solved it by replacing the charger.

the same happen to me and i have another issue
my xperia doesnt work as usb mass storage!!!
the solution was buying another charger but..the usb mass storage issue still not working as a flash drive!!

luirhy said:
same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally
Click to expand...
Click to collapse
It works with Z1 too. Thanks a lot!
I guess something goes wrong with battery controller

How can recharge batterry from USB link with PC

Hi!
Due to the batterry time not ling enough, some time I am on the trip with PC. But the GS7.7 is not support to recharge batterry via USB link. Who have the Idea or soft support GS 7.7 recharge batterry via USB please?
Thanks

phuong said:
Hi!
Due to the batterry time not ling enough, some time I am on the trip with PC. But the GS7.7 is not support to recharge batterry via USB link. Who have the Idea or soft support GS 7.7 recharge batterry via USB please?
Thanks
Click to expand...
Click to collapse
I don't know , but I think even if you were able to charge via usb it will took very long time in order to full charge it because capacity of battery is big

Need to make your self a universal usb charging adapter,look it up on here.
Works and been tested with 7.7 aswell!
You need to solder resisters 33k and 10K To the data and power lines...
Look for it in 10.1 forum
How to make your own universal charger for galaxy tab.

MRBR7 said:
Need to make your self a universal usb charging adapter,look it up on here.
Works and been tested with 7.7 aswell!
You need to solder resisters 33k and 10K To the data and power lines...
Look for it in 10.1 forum
How to make your own universal charger for galaxy tab.
Click to expand...
Click to collapse
Do you mean D+ and D- lines of USB need to be pulled up ? and which D line should have 33k or 10k ?

Link please .

yes thats the one..
(make sure you join the resistors to each other at the middle aswell.)
Look at the resisters you use and make sure they are both facing the same direction.My first attempt to do it failed and at first i thought it didnt work on 7.7
Then i noticed one resister was back to front.not 100 percent sure if this was the problem but after i changed this from looking at pictures online and comparing the pics to my resisters i noticed what end the 2 colored bands are at.the 33k one with the gold bands and the 10k one with dual black bands.
The end of the restister with the gold bands(33k) and Black bands(10k)
is the end that the power joins to.
The other end of the resister should have matching bands on 10k and 33k.
this is the end that joins to the data line.

phuong said:
Hi!
Due to the batterry time not ling enough, some time I am on the trip with PC. But the GS7.7 is not support to recharge batterry via USB link. Who have the Idea or soft support GS 7.7 recharge batterry via USB please?
Thanks
Click to expand...
Click to collapse
once i left my turned-off 7.7 connected to my running PC for few hours, to my surprise the battery seems to be charged-up during that time

yup... its still charging... but slowly...

Actually you could get faster charging with that USB data cable when the PC has been installed with the proper drivers. The standard downstream port could deliver up to 500mA ONLY after the USB hub has negotiated power draws with the host interface. Otherwise the port might just deliver less that 100mA power.
Kies provides the suitable driver. You may uninstall Kies afterward and keep the driver installed.
In addition, PCs have two kinds of USB port — standard downstream port and charging downstream port. Some older PC would label them 'SDP' and 'CDP', but I found that most modern PCs don't distinguish them at all. As you might imagine, you could get faster charging plugging into a CDP than into a SDP.
FYI., those ports used in wall charger is the third kind of USB port, CP - Charging Port.

Hi!
After installed the Battery HD soft, when link with PC, That programe showing the charging time and progress charge. but still not sure.

I am charging via USB as we speak.
I am doing it using a standard mincroUSB cable (that I use to charge my GNote and SGS2) and added an adapter I got on eBay for my SGT10.1
You can pick one up here: http://goo.gl/EMzpJ
It's not as efficient as the AC charger but it's doing a good job and will get you by if you haven't got access to a power point.

Can use this hub to charge as well
This SIIG INC - SYNC/CHARGING HUB AND READER FOR GALAXY TABLETS - CE-H21112-S1 gives you the capability to charge your Tab through a computer USB port. Seems to work pretty good used it last night. Checked the net prices vary per vendor.

Franwella said:
I am charging via USB as we speak.
I am doing it using a standard mincroUSB cable (that I use to charge my GNote and SGS2) and added an adapter I got on eBay for my SGT10.1
You can pick one up here: http://goo.gl/EMzpJ
It's not as efficient as the AC charger but it's doing a good job and will get you by if you haven't got access to a power point.
Click to expand...
Click to collapse
I bought one of these not for charging, but it is cheap crap, Or it isnt ment to fit our tab p1000 s connector isnt the same as ours! it destroys the tabs connector, i wouldnt recommend it.

zsolti256 said:
I bought one of these not for charging, but it is cheap crap, Or it isnt ment to fit our tab p1000 s connector isnt the same as ours! it destroys the tabs connector, i wouldnt recommend it.
Click to expand...
Click to collapse
The connector on the 7.7 tab is exactly the same as on P1000. There is no trouble in charging.

My original cable came with the tab allows me to charge via USB @ my laptop, but the charging speed is very slow. So I prefer to use an external portable charger over this most of the time. Not sure if there are any apps or software that allows fast charge kinda stuff?

[Q] phones charges very slowly and heats too much

Im using my xperia sp for few months.i forgot my original data cable at work place last friday.then i tried to charge my phone using tab's charger.but it wasnt charge with it.then i found another usb cable.i connected it to original charger and tried to charge it.then charging led was lighten.but charging speed was very slow.it took 6hours to full charge it.and phone heats 45'c.i'm feeling very bad about my phone.how can i fix this.how to charge it as normal? Will my original usb cable fix this issue? I cant get it untill tomorrow.please help me

RULE 5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
So far you have created 3 threads for the same problem... Please follow the rules.

im sorry
i post this only twice,not 3 times. and first one was posted in wrong discussionby mistake.. i'm new here. i cant find any option to delete my old thread on wrong discussion. i'm very sorry.but please help with my issue.

no, wrong usb cable doesnt make the device overheating, & damaged usb cable wont charge anymore. i think the problem is ur original charger or rom what u used.
iam experience that in my old sgs+..

masteranu said:
Im using my xperia sp for few months.i forgot my original data cable at work place last friday.then i tried to charge my phone using tab's charger.but it wasnt charge with it.then i found another usb cable.i connected it to original charger and tried to charge it.then charging led was lighten.but charging speed was very slow.it took 6hours to full charge it.and phone heats 45'c.i'm feeling very bad about my phone.how can i fix this.how to charge it as normal? Will my original usb cable fix this issue? I cant get it untill tomorrow.please help me
Click to expand...
Click to collapse
The Sony charger and cable are specially made for faster charging. If you connect your original charger and cable to a samsung phone, you'll see how quickly they charge up. Other cables will take more time.
Always try and use the original cable and charger. Otherwise it will charge slowly. But I don't know about the heating.

thanks
thanks everyone. i visited repair centere and they said it was problem with my charging ic.not any cable or wall socket.
i tried different chargers yesterday, he said one of my chrger's ampier rate was above 1.5A and that may cause to this error.

Charging problem :( i need help

Hi I have an international rooted Galaxy S-III i9305, bought it in June . The charging has been unstable, as in sometimes it would charge up just fine while sometimes it even discharges when charging. I went to the Samsung service center and they gave me a new charger without checking my phone. The problem persists. I borrowed another charger from a friend and the same thing happens. I bought a new port connector and same results ..
I came across an app in the XDA forum, Galaxy Charging Current. Tested it to realise that it's the phone problem it should show 1000ma but it show 1000ma sometimes and 500ma sometimes and 100ma sometimes ... , I had to keep reconnecting the charger to obtain an efficient charge and its not stable it change :\ :'( im really tired i hope you can help me .. I tryed to change my android version (4,4,4) and i flashed unofficial cm12 but no way

Go into battery section on settings.
While it's charging , does it states USB or CA ?

?
daedric said:
Go into battery section on settings.
While it's charging , does it states USB or CA ?
Click to expand...
Click to collapse
Where ? I cant share links cause im new
hpics.li /335f455
Remove space

First, use imgur.com
Second, change your language to English, the French translations does not ditinguish between USB and AC charging (just for this test, you can revert after)
Then, plug in your wall charger. It should say Charging on AC or Charging on USB. Check it.

daedric said:
First, use imgur.com
Second, change your language to English, the French translations does not ditinguish between USB and AC charging (just for this test, you can revert after)
Then, plug in your wall charger. It should say Charging on AC or Charging on USB. Check it.
Click to expand...
Click to collapse
Ah it say charging with AC whats mean that ?
i.imgur.com /s7UOnDM.png

Charging from AC means: Power Line.

Maves23 said:
Charging from AC means: Power Line.
Click to expand...
Click to collapse
So what should i do ?

Looks like your USB port is about to die. Had mine to repair twice because my phone wouldn't charge or be recognized via PC. Pretty common issue of the S3.

help: Keep getting message "For Faster Charging Use Original Charger" I'm using the o

help: Keep getting message "For Faster Charging Use Original Charger" I'm using the o
i tried to use a generic otg cable (china made) on my samsung galaxy tab s2, at first I was able to view files on my usb but when the the tablet was moved i wasn't able to view now my usb files. then when my battery gets to 7% i tried to charge it with my original samsung charger (that came in with my tablet package) the red x on the battery started to show and there was a notification that says "device charging slowly, to charge faster, use the original charger". I dont know what the real problem is- is it because i used a defective otg or my tablet has the issue. please help my tablet is 2 months old

Try a different charger

ashyx said:
Try a different charger
Click to expand...
Click to collapse
i already did- no luck. do you think that after i plug the otg i may damage some internal parts of the tablet?

Get some juice into it then download the app Galaxy charging current and see what it's putting out.

I have a charger for my s6 and one for the tab s2. They look the same but reading the fine print, the tab s2 is a quick charger while the s6 is a normal one. It does make a difference, the quick charger is definitely faster

You have a faulty cable, specifically there is a break / bad / intermittent connection.