Database Develop

USB/Charger reboot the phone, download mode lost, vibrant rom on i9000

OK guys I really badly need some help. My phone is in a non-workable state and I am starting to run out of options.
I did some mistakes but I will try to take out the details to list mostly the fact, hoping someone will take the time to give me directions.
- I have a galaxy s I9000 (switzerland/orange)
- I had upgraded to 2.2 via Kies.
- I got tired of the phone becoming increasingly slow. I found out about voodoo lag fix. I read 3000 forum posts, documentation and stuff, and when everything seemd easy enough, I installed voodoo via Odin.
- Here problems started. After installing voodoo, the phone booted, but the robot voice said "convert data partition. Not enough space on partition". Then again. And again. It was stuck in a boot loop. This problem doesn't seem to be documented anywhere i could find. The only instructions I could find on how to disable voodoo were to create some files on the disk, not very helpful when you can't boot the phone.
- I found a couple of threads with people who had the same message, and the advice their were given was to flash another rom.
- So I went to samfirmware.com and downloaded 2.2.1 for I9000 (JS8). I installed it through Odin. The phone booted, showed me the Galaxy S screen, then went black. Then it would vibrate every 20 seconds or so. Once, then 3 times in a row. I waited 30 minutes because in some places it said that may take long, but the situation didn't change. I rebooted, tried again after taking about the battery, wiped data, reset factory settings etc. The phone state wouldn't change, and I started to get a little desperate, because this was a stock rom, and if that didn't work...
- I read 3000 more threads, and phone a guy who had been in this situation, and got out of it by first installing "Eugene's JK2 froyo that never bricks" and then after wards reinstalling the stock rom.
- So I installed Eugene's rom. I knew it was trouble that it was a vibrant's rom, but I figured, I had read everywhere that as long as your phone supported download mode you could still always re-flash a new rom, so I decided give it a try.
- And the phone booted. Asked my pin, loaded stock android and all. I was happy at first, but then new trouble came. Now, whenever I plug in the USB, the phone's screen goes black after 4-5 seconds. When I unplug it, phone reboots. No charging battery appears when I plug the turned off phone on the charger.
- And worst of all, the buttons got mixed up. Vol up is vol down now. But more of a problem, 3 button recovery and 3 button download mode don't work anymore. I couldn't find a way to get them back. So I can't flash a new rom with Odin :-/.
- My latest was to install rom manager since I can access the market. I downloaded the tedgy rom. Installed the "clockwork recovery mode" from Rom Manager. It asked me if I had I9000 or vibrant, wasn't sure what it expected since I have now a vibrant rom on an I9000, but I put in I9000. Then I reboot telling rom manager to install Tedgy. I get a recovery mode screen which offers to reboot/reinstall packages/wipe data, then does a couple of operations, and finally gets stuck on :
can't open /cache/update.zip
(bad)
installation aborted
So there I go, with a vibrant rom on my I9000 (rooted, at least), a phone that can boot a half-functionnal android, but with a useless cable plug, an unchargeable battery, and a download mode I couldn't find... And waiting for my wife to get back with her phone so I can charge my battery again...
Any help or lead to help me get another rom installed on this phone again would be *greatly* appreciated. What other ways do I have to access download mode ? Or is there a way to get to it despite my buttons being messed up ? Maybe the rom manager issue can be fixed ?

OK well I got out of it somehow.
In case someone else had this same issue, here's how I got out of it :
1) Install ADB.
2) launch Odin
3) go to adb folder in command line and type "adb reboot download" but no enter just yet.
4) plug the usb cable on the phone.
5) type enter in the adb shell in the small window of opportunity you have before the screen goes blank. This reboots the download mode and allows new flashing via odin.

Any answer for this thread?
Did you fix the problem?
I'm stuck with the same case...

Flash gone wrong

Hi,
I've flashed multiple times before without an issue until today.
First, here's my background information:
Samsung Captivate (ATT)
Was running Continuum 5.4.1 but it felt laggy so I attempted to flash MIUI 1.5.13.
Here's what I did:
I wiped my phone using the Odin One click tool, then flashed CM7's kernel and then performed formats of the cache, system, and data, then installed MIUI RC2. After this step the phone should have restarted, then I planned to shut it down and reboot into recovery and flash 1.5.13 onto it.
My problem(s):
-Boot into recovery/download mode using key combinations is not working.
-The ADB console reports device not found when I try to run adb shell.
-The phone is undetected in Droidexplorer.
-When I attempt to download an app to boot to recovery with the phone says there is no space even though nothing has been installed other then MIUI.
What I would like to do:
Get back to stock with download/recovery modes working.
On a side note: MIUI works, but in a very limited way. I can navigate through it, but it won't allow the installation of applications due to there not being room on the phone (as said before).
Thanks!
Update - my phone was being identified as a Nexus S, so without those drivers my phone could not be debugged via USB. I now have the drivers and can perform ADB commands, however rebooting into recovery and into download mode both result in the phone restarting without going to the download or recovery mode.

Try using ODIN and repartitioning. I have good videos on standard ODIN and Heimdall on YouTube just search them. If you can not get out of this contact me, I have been able to partition debrick in the past and it's actually considered by me far more annoying than standard bootloader JTAG in certain situations. Let's hope yours is easier to bail out of!

First of all thanks for the reply and direction.
Secondly:
After working on this all last night I was able to get the phone recognized by Odin and my computer, now I am stuck at one of two screens depending on what I do.
If the phone is powered off then plugged in, the battery charging screen appears but there is no animation and after unplugging it the battery charging image remains.
If I power the phone on it hangs on the Samsung boot screen.
Repartitioning does sound like the proper direction for me to take, but, when I use Odin it freezes while setting up the connection to the phone.

when the phone is powered off try holding both vol keys and plugging in the cable. That could possibly get you to download mode. If not try vol down/pwr at the same time since you are now on GB bootloaders the keys are a bit different. Let me know what happens and good luck

maybe you should try to build a jig and use it to get into the download mode first. or you can buy it on ebay, just search for "micro usb jig".

I've tried every volume and power combination possible to no avail, I can't get into download mode. I've given in and am exchanging my phone. Thanks for the help anyway guys!

[Q] Hopefully Soft Bricked [fixed]

Hello.
I was playing around a bit, and made a bad decision on disabling a sys app, with a root uninstaller app.
Now my phone starts up, but stays on the 'samsung' splash-screen.
My home doesn't seem to get loaded, so its stuck there.
I do, however, get notification sounds from text-messages and push-services.
My phone is rooted, but had no recovery installed, neither did I run busybox.
Not sure wether it runs 4.1.1 or 4.1.2, but I guess 4.1.1 because there's no intern recovery I can activate...
I tried flashing the recovery package with odin, still can't seem to get inside recovery... (Yes I can get into Download Mode)
I tried to reboot into the recovery via adb, but my phone - logically - doesn't respond to those.
Apparently, my USB Debug is not activated also... The phone connects, but I can't even do something with tools like GS3 Mini Toolkit.
Kies doesn't seem to connect either (even when the phone is on)... probably services that don't get started due to a battery saver app...
Long Story Short
Is there a rom & kernel, that can fully wipe my phone, via Odin, cause Download Mode seems to be my only option in recovering my phone.
Or any solutions that you could come up with.. because I already tested so much things,
and it's still stuck on the samsung 'lighting up' logo and a black screen.
The phone is for work & personal use... and I don't have the option to replace it atm.
I really need to get it working again... it was the only smartphone I ever had a decent battery life with (avg. 2.5days)
Thanks in advance!
- Fixed, I got into recovery mode, I forgot to stop pushing the powerbutton... so it rebooted. YAY :highfive:

[Q] Bootloop, can't get phone to stay in Download mode to reflash

Hi all
I reflashed an old i9000 with CM10.1 for my wife recently, and everything seemed to be working fine. Then it started behaving a bit funny and this week it started rebooting at random. I thought "no worries, I'll just do a fresh flash with stock GB".
However, before I could even give that a go the phone started acting even weirder. As soon as I put the battery in it powers on (without me even pushing the button) but it resets every time it hits the Samsung splash screen. Earlier today I could get it to go into CWM recovery and after clearing cache I actually got it to boot up. But by the time I had downloaded the stock GB files the phone was just constantly resetting at the Samsung logo and now I can't even get it to load CWM recovery using the 3-button method.
I can get it to enter Download mode, and it shows up in Odin just fine. But within 5 seconds it resets itself again so I can't actually perform a flash.
Any suggestions? Or is the phone just plain busted?

mrfurion said:
Hi all
I reflashed an old i9000 with CM10.1 for my wife recently, and everything seemed to be working fine. Then it started behaving a bit funny and this week it started rebooting at random. I thought "no worries, I'll just do a fresh flash with stock GB".
However, before I could even give that a go the phone started acting even weirder. As soon as I put the battery in it powers on (without me even pushing the button) but it resets every time it hits the Samsung splash screen. Earlier today I could get it to go into CWM recovery and after clearing cache I actually got it to boot up. But by the time I had downloaded the stock GB files the phone was just constantly resetting at the Samsung logo and now I can't even get it to load CWM recovery using the 3-button method.
I can get it to enter Download mode, and it shows up in Odin just fine. But within 5 seconds it resets itself again so I can't actually perform a flash.
Any suggestions? Or is the phone just plain busted?
Click to expand...
Click to collapse
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.

Thanks for reporting howto ...:good: good to know
mrfurion said:
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.
Click to expand...
Click to collapse

mrfurion said:
I'm just going to answer my own question as I've solved the problem but it may benefit someone else to know how.
It got to the point where the phone wasn't even booting to the Samsung splash screen, but I could still get Download mode to show up for 5 seconds (not long enough to flash). Then in a moment of desperation I got the original Samsung microUSB cable and plugged that in, and booted into Download mode again. This time Download mode stuck! And I was able to flash a clean GB ROM which is now working fine.
So the take-out from my experience is this: sometimes you really do have to use the original Samsung USB cable.
Weird.
Click to expand...
Click to collapse
I have a similar issue where I'm trying to flash my stock ROM on my Epic4gTouch. When it opens up the download mode error I start to flash and all seems to work before it reboots. Every 5 seconds. I tried the original cable and it did not help. Any ideas??

NerdsBestAdvice said:
I have a similar issue where I'm trying to flash my stock ROM on my Epic4gTouch. When it opens up the download mode error I start to flash and all seems to work before it reboots. Every 5 seconds. I tried the original cable and it did not help. Any ideas??
Click to expand...
Click to collapse
put the cable and press button power the phone go mode charging at this time make the phone in download mode
its ok for me:good:

[SOLVED] Cannot enter flashmode since flashing nAa 2.6.29.6-nAa-ics-04

Hmmm...
So my Galaxy SII just died, and I need a phone, so this X8 I had lying around seemed like it would do.
I had some very unstable FW on it, so I thought I'd find something else.
Decided on kuyaDROID and CWM'ed it. It'd boot with strangely garbled graphics.
So I thought I'd try some other kernels.
I've flashed a few different ones, but this last one turned out to kinda brick my phone in a way.
I flashed the 2.6.29.6-nAa-ics-04 one trying to get kuya to work. I now have a phone that'll reboot indefinitely, sometimes showing an "nAa" logo sliding in from the right. This is mostly when I connect it via USB to my laptop. Otherwise, it'll turn on the screen, showing black, then hang for a while, then reboot and do the same.
This wouldn't be a problem, except I can no longer get it to enter flashmode so that I can flash a working kernel. Back+plugging in USB no longer makes the flash tool recognize the device. I just get a lot of ding-dong and dong-ding sounds from Windows while it reboots and reboots and reboots.
I'm not sure where to go from here... Any ideas?
Thanks
EDIT: Feeling stupid — it wasn't the phone at all, it was Windows which had gone into some funk of not properly recognizing the device. A reboot allowed me to flash once more