Vzw 4G not working - One (M7) Q&A, Help & Troubleshooting

I have the newest NUsense Rom and I have flashed other roms and it's still not working. I've toggled airplane mode, I've switched to global to Vzw. Taken the sim card out and put it back in. Idk what else to do.
(I know i get 4G where i am currently at, because my Gnex had it)
also, i just got a new Sim Card, thinking maybe the sim card went bad, that didnt do anything.
Please help!
Sent from my HTC6500LVW using xda app-developers app

collinjm01 said:
I have the newest NUsense Rom and I have flashed other roms and it's still not working. I've toggled airplane mode, I've switched to global to Vzw. Taken the sim card out and put it back in. Idk what else to do.
(I know i get 4G where i am currently at, because my Gnex had it)
also, i just got a new Sim Card, thinking maybe the sim card went bad, that didnt do anything.
Please help!
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
So i Flashed All stock rom/radio/Kernel and still no 4G.
Help would be appreciated.
thanks

collinjm01 said:
So i Flashed All stock rom/radio/Kernel and still no 4G.
Help would be appreciated.
thanks
Click to expand...
Click to collapse
are you sure you phone isnt set to ''GSM only''?
dial *#*#4636#*#*
an make sure it is set to ''gsm/wcdma/lte auto''

alray said:
are you sure you phone isnt set to ''GSM only''?
dial *#*#4636#*#*
an make sure it is set to ''gsm/wcdma/lte auto''
Click to expand...
Click to collapse
I am on verizon and it is set to cdma/lte

Related

[Q] No SIM card in phone

OK guys... I usually lurk, but find myself now needing help.
In an attempt to help my friend, I was going to root his phone and install a custom ROM. The phone is a 1010 build and I forgot to remove the SIM when performing one-click-root.
Now the phone will not recognize the SIM card. I don't think the SIM is bad because it won't recognize mine either and my card works in my phone.
I followed the instructions for 1010 builds back to JH2 and the SIM is still not recognized. The phone came with JH7 installed, but I figured that the SIM would be recognized after booting into JH2.
Can anyone offer assistance?
Thanks.
EDIT: His SIM works in my phone. Just thought you might ask.
Bump please
Sent from my SAMSUNG-SGH-I897 using XDA App
I had this happen in my old Tilt lol. Try backing up the sim from your phone and if not, you have to get a new sim.
Sent from my SAMSUNG-SGH-I897 using XDA App
The SIM card still works... just not in this phone. It works in my captivate. I think I am in trouble here. <slaps self> That's what I get for rooting company phones. :\
If anyone knows something that I can try to get this phone to recognize the SIM... please chime in. Right now I am back to JH7 rooted.
verify that you have the right modem in it and check the APN settings
Model Number: SAMSUNG-SGH-I897
Firmware version: 2.1-update1
Baseband version: I897UCJH7
Kernel version: 2.6.29 [email protected] #2
How do I check the APN settings?
Sorry... can't verify APN settings if SIM is not detected. Looks like I'm hosed. Thanks for the replies.
APN shouldn't affect recognizing the SIM. Are other SIMs working with this phone? You may want to try either a master clear, or downloading the ODIN version of 2.2 stock to see whether they will recognize SIMs before returning the phone.
Try a rom! Or kb1 or ji6 try flashing like everything to it, hopefully that'll do something also go to settings>privacy>factory data reset and make sue you backup first
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes i know. My sim card still worked in my captivate just not my tilt, all you need to do is go to at&t and tell them your sim card isnt working. They should be able to transfer your contact and get you a new one. But this just a last resort, try these guys suggestions
Sent from my SAMSUNG-SGH-I897 using XDA App
You can get apn settings by pitying your friends sim in your phone
Sent from my SAMSUNG-SGH-I897 using XDA App
even new apn settings wont load if its not detecting the old sim. i ran into this but didnt fix it. got replaced. different situation....
i had this after a noobish bad flash where i odin'd to phone instead of pda.
i lied my ass off and got the phone replaced that night, as i NEEDED the phone THAT NIGHT no time to play and fix myself. that was by bad! now i flash at night only when i wont need my phone for hours.
you dont need to take out your sim to root. i never have. i use oneclickroot 1.7.
so im not sure what you did to screw it up.
but if someone elses SIM works in your phone then that means the phone is fine. AND if your SIM doesnt work then it means your SIM doesnt work!

[Q] Samsung Galaxy S I9000 No Service!

Hope Someone can help.
I had a problem with my Samsung galaxy s i9000 and i was told to flash it using Odin, i downloaded the files from sam firmware and put android 2.3 onto it, when it had completed the phone will not get a service, everything else works fine and it reads the sim card and the contacts etc it just wont connect to network?
Can anyone help?
Thanks
Josh
Does it work wireless ?
Does it get phone network, or both data and phone services are unavailable ?
Do you have in wireless and network settings under mobile network the "use data packet" switched on ??
Did you try with a sim from another operator just to see if it's a matter of specific operator settings ?
I got italian language, maybe settings name are a bit different from the ones i mentioned, but that's the concept.
Bye
gbnz said:
Does it work wireless ?
Does it get phone network, or both data and phone services are unavailable ?
Do you have in wireless and network settings under mobile network the "use data packet" switched on ??
Did you try with a sim from another operator just to see if it's a matter of specific operator settings ?
I got italian language, maybe settings name are a bit different from the ones i mentioned, but that's the concept.
Bye
Click to expand...
Click to collapse
all that works fine and i haven't tried a new sim card as i do not have another sim card to try but i thought that if it was that problem the phone would not start as it would ask you for a network lock code? it is really annoying. ]
thanks
Check your imei dont post it here just check it is correct. hopefully you havent trashed your efs folder
Sent from my GT-I9000 using XDA App
android Josh123 said:
Hope Someone can help.
I had a problem with my Samsung galaxy s i9000 and i was told to flash it using Odin, i downloaded the files from sam firmware and put android 2.3 onto it, when it had completed the phone will not get a service, everything else works fine and it reads the sim card and the contacts etc it just wont connect to network?
Can anyone help?
Thanks
Josh
Click to expand...
Click to collapse
Check if your IMEI is correct, you find it under settings, about, status.
Your correct IMEI is on a sicker under the battery.
Edit: to late ; )
/qsec
stierney said:
Check your imei dont post it here just check it is correct. hopefully you havent trashed your efs folder
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have typed the code into the phone and the IMEI number that pops up is the same as the one on the back of the phone underneath the battery.
Thanks
Ok well thats good news. Can ya make phone calls?
Sent from my GT-I9000 using XDA App
android Josh123 said:
I have typed the code into the phone and the IMEI number that pops up is the same as the one on the back of the phone underneath the battery.
Thanks
Click to expand...
Click to collapse
Was it the same problem with the service before you flashed it?
What rom did you flash?
/qsec
stierney said:
Ok well thats good news. Can ya make phone calls?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
nope when i try and make a phone call or send a text it says "mobile network not available"
mmmm....
are you sure you downloaded the correct rom ? I mean there are different roms for different countries.
While you just reflashed, why dont you go back to original stock rom or to a stable one (one i remember is JPY_JPY_JPY) just to see if everything works fine ?
Anyway....which was the problem you had that required you to flash with odin ??
Yeah you prolly downloaded a rom fir another region if your imei is in tact and ya vant even make calls. If you can make calls and just cant use data then the rom doesnt have your apn settings and you will have to add them manually.
Sent from my GT-I9000 using XDA App
qsec said:
Was it the same problem with the service before you flashed it?
What rom did you flash?
/qsec
Click to expand...
Click to collapse
Nope before it was flashed it wouldn't read the sim card but i was told that flashing it will solve it and now it does read the sim card but it will not get a service and the phone was 2.2 and i flashed it to 3.3 gingerbread.
Thanks
Post your Country and network operator also the Rom ya downloadef and where ya downloaded from.
Sent from my GT-I9000 using XDA App
stierney said:
Post your Country and network operator also the Rom ya downloadef and where ya downloaded from.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I am in
England
Im on Network 02
the rom i downloaded was from samfirmware
"I9000XWJVB ## 512.PIT 2.3.3 2011 April 8 CSC = I9000XEEJV3" thats all the imformation about the rom
thanks
android Josh123 said:
Nope before it was flashed it wouldn't read the sim card but i was told that flashing it will solve it and now it does read the sim card but it will not get a service and the phone was 2.2 and i flashed it to 3.3 gingerbread.
Thanks
Click to expand...
Click to collapse
Have you bought it used with this problem?
If so there is a chance that the IMEI is reported stolen and blocked at the service provider.
/qsec
qsec said:
Have you bought it used with this problem?
If so there is a chance that the IMEI is reported stolen and blocked at the service provider.
/qsec
Click to expand...
Click to collapse
No, i got the phone for Christmas and it was fine until it would not read the sim card and then i got told to flash it with Odin and that should fix the problem and it did the phone will not read the sim card and that problem is not there anymore but there is a new problem since flashing and it wont connect to a service
thanks
android Josh123 said:
I am in
England
Im on Network 02
the rom i downloaded was from samfirmware
"I9000XWJVB ## 512.PIT 2.3.3 2011 April 8 CSC = I9000XEEJV3" thats all the imformation about the rom
thanks
Click to expand...
Click to collapse
That is the wrong one for UK. Use XXJVK instead and you will be fixed.
midas5 said:
That is the wrong one for UK. Use XXJVK instead and you will be fixed.
Click to expand...
Click to collapse
Used this firmware and the fault is still there anything else it could be?
thanks
Factory reset, flash a different rom, factory reset. Not all flashes are totally successful, this should help
Sent from my GTI9000 using XDA App, gingerbread 2.2.3 jvk rooted, ADW launcher + gingerbread theme
android Josh123 said:
Used this firmware and the fault is still there anything else it could be?
thanks
Click to expand...
Click to collapse
Try to test another sim-card.
It could be that easy, even if it seems to work a bit.
/qsec

ROMs for SPH-P100 without Data Plan

I haven't been able to find a definitive answer to this question yet: Does it make a difference which JB ROM I flash on a SPH-P100 on which I am only using wifi? I have been using CM10 Nightlies, which are fine, but they do incorrectly identify the phone as Verizon. Basically, I'm interested in trying out some of the other ROMs.
Thanks!
if you aren't using data it won't matter. you won't be able to use the data anyway if your esn isn't registered to their network.
Just to be absolutely sure, would it make a difference if it's a GSM ROM?
Mobile Data 3G Not Working CM10
derekwilkinson said:
if you aren't using data it won't matter. you won't be able to use the data anyway if your esn isn't registered to their network.
Click to expand...
Click to collapse
I have 2 SPH-P100 on VZW and I had them on ICS9 and after updating it to CM10 my Mobile Data Stopped working on both any Ideas????
Whizzpopper said:
Just to be absolutely sure, would it make a difference if it's a GSM ROM?
Click to expand...
Click to collapse
It will brick your CDMA device.
Sent from my GT-P1000 using xda app-developers app
Thanks
priyana said:
It will brick your CDMA device.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Any ideas to revert or make it work? I was able to downgrade to cm and still wasn't working I'm gonna try CDMATool and try with different IMEI and MEID. Do you know what did exactly bricked?? Baseband, modem drivers, or is just a ROM malfunction? An Volunteers to help me figure it out, lol
Thanks for all your help.
andyxaspikes said:
Any ideas to revert or make it work? I was able to downgrade to cm and still wasn't working I'm gonna try CDMATool and try with different IMEI and MEID. Do you know what did exactly bricked?? Baseband, modem drivers, or is just a ROM malfunction? An Volunteers to help me figure it out, lol
Thanks for all your help.
Click to expand...
Click to collapse
I was replying to the person who want to flash the GSM ROM into his CDMA device.
I personally have never encountered anyone who has done that.
Are you saying you accidentally flashed a GSM rom into your CDMA?
As long as you can still go to download mode, you should try to flash a stock CDMA rom that has a pit file as well, using Odin repartition or use heimdall.
priyana said:
I was replying to the person who want to flash the GSM ROM into his CDMA device.
I personally have never encountered anyone who has done that.
Are you saying you accidentally flashed a GSM rom into your CDMA?
As long as you can still go to download mode, you should try to flash a stock CDMA rom that has a pit file as well, using Odin repartition or use heimdall.
Click to expand...
Click to collapse
Well I Flashed the p1c (CDMA) CM10 nightly. while I'm connecting to my WiFi it shows verizon wireless on the status bar. and if I go to the status it shows Network (Verizon Wireless) ,signal strenght (akward -4dBm), Mobile Network type (CDMA - EvDo rev. A:6, Service state (In Service), Mobile Network state (Disconnected) I turn off the WiFi and it stays in Connecting for 10-15 secs and goes back to Disconnected.
I tried heimdall and I was able to put the zimage and recovery. when I add the pit file it grays out, so I tried some of the One Click restock and it allowed me to go back to my NAND backups on CM9 but it just doesnt want to connect.
any other suggestions??
THANKS A LOT for all your help!!!!
I didnt I figured out they sold them to me with free data plan for 6months then thats when it stopped...

[Q] S i9000 unable to connect to network

Hi, I'm hoping you can help. Total noob so please bear with me.
I got a Si9000, it says it is unlocked.
When putting in sim card I got data network not available error.
Installed S1_Odin_20100512.pit
In PDA option I put in code_i9000XXJVS_CL565837_REV03_USER_LOW_SHIP.tar
For phone option I put in modem_i9000XXJVS_REV_00_CL1059471.tar
For CSC option I put in GT-i9000-CSC-MULTI-OXAJVS.tar
After I was told to type in *2767*3855# to reset phone.
Phone has been updated to 2.3.5, but now getting not able to connect to network error. It says mobile network unavailable. Any Ideas?
Thanks
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
slow--welder59 said:
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
Click to expand...
Click to collapse
Thanks for replying
Yes, the phone is shows the network, but when you try to select it, it says unable to connect.
I just checked there, and the IMEI number is valid
The files are in the right place, so nothing wrong there. Is wifi working?
snapper.fishes said:
The files are in the right place, so nothing wrong there. Is wifi working?
Click to expand...
Click to collapse
Yep, but wifi is the only thing thats working. No data or mobile network, no GPRS either
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
I am wondering if it's just something in the connection settings. When I went to Japan last year I had to fiddle with something in the settings before I could pick up signals. It was in mobile networks. I think you can select cdma or something like that.
Sent from my Nexus 4 using Tapatalk 2
EwOkie said:
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
Click to expand...
Click to collapse
Im with Go Conquer in Ireland, actually brought the phone to a shop to be unlocked, as it was Vodafone, but they said it already was unlocked. They have their settings up on their website so I have entered them.
I'm going to try putting it back to its original settings again, and rooting it again, do you think that might be it? Ill also try the cdma settings.
Thanks to you both
Follow my Guide below to flash Rom and then Root it
Why did you go to a shop to unlocked it ...theres apps on here free??
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Try to flash in odin without sim and put it later when it boots
Sent from my GT-I9000 using XDA Premium 4 mobile app
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Are you sure to have flashed ROM with proper CSC bandwidth for the region where you live?
Hi,
Thank you all for replying! For some unknown reason the phone works. I left it a day off and then I powered it up again and it worked. So I dont know how but thank you guys for replying!
Grtz,
Happybeat

BQL1 New verizon firmware update

I just updated to the new BQL1 firmware and now my sim card is saying it is not registered on the network. I replaced the sim card and it was working until my battery died. I charged phone and turned it on and now sim card not registered on network again. I have reset network settings and toggled everything I know how to try to get it to work but nothing helps. Has anyone else experienced this problem? Sim was working fine on bqk5 firmware. Thanks.
fersayken2 said:
I just updated to the new BQL1 firmware and now my sim card is saying it is not registered on the network. I replaced the sim card and it was working until my battery died. I charged phone and turned it on and now sim card not registered on network again. I have reset network settings and toggled everything I know how to try to get it to work but nothing helps. Has anyone else experienced this problem? Sim was working fine on bqk5 firmware. Thanks.
Click to expand...
Click to collapse
I upgraded from G950USQU1AQG4 to G950USQS2BQL1 today and had the same issue. Even factory reset didn't work. Bootloader changed from 1 to 2 so going back wasn't an option for me. Registering a new sim card was the only option for me. I only tried a new sim card because the vzw site gave me this message while trying to re-activate the one i had been using:
HTML_COTENT_NOT_FOUND_FOR_CONTENT_KEY: devicechange_sim_aging_message
Glad i wasn't the only one who wasted a day with this crp.
Can we upgrade BQk1 to oreo?
Sent from my [device_name] using XDA-Developers Legacy app
I'd updated to Oreo from BQL1 and am trying to Odin back, but it keeps failing. Anyone have any suggestions? I'm using the 3.12.7 odin.
Thanks!
All good. Re-installed the samsung drivers and everything worked perfectly.
mirajman said:
I upgraded from G950USQU1AQG4 to G950USQS2BQL1 today and had the same issue. Even factory reset didn't work. Bootloader changed from 1 to 2 so going back wasn't an option for me. Registering a new sim card was the only option for me. I only tried a new sim card because the vzw site gave me this message while trying to re-activate the one i had been using:
HTML_COTENT_NOT_FOUND_FOR_CONTENT_KEY: devicechange_sim_aging_message
Glad i wasn't the only one who wasted a day with this crp.
Click to expand...
Click to collapse
Hey. A new sim card worked for you? Didn't work for me.
fersayken2 said:
Hey. A new sim card worked for you? Didn't work for me.
Click to expand...
Click to collapse
Try using Odin3 v3.12 PrinceComsy to roll back to GS950USQU2BQK5.
Also, did you activate the new sim card on the vz website first?
I'm pretty sure this is what I did...
Factory reset, shutdown, remove the old sim, activated the new sim online, insert the new sim into the s8, turn on the phone.
mirajman said:
Try using Odin3 v3.12 PrinceComsy to roll back to GS950USQU2BQK5.
Also, did you activate the new sim card on the vz website first?
I'm pretty sure this is what I did...
Factory reset, shutdown, remove the old sim, activated the new sim online, insert the new sim into the s8, turn on the phone.
Click to expand...
Click to collapse
Can we roll back to the previous firmware from S2QBLI back to U2BQK5 so I can then root my phone and use my hotspot
Sent from my SM-G950U using Tapatalk
Can someone please post a mirror to the firmware, every site I go to download has a d/l speed of about 15kbps and I can't be annoyed with that. Thank you!!
megaghostgamer said:
Can someone please post a mirror to the firmware, every site I go to download has a d/l speed of about 15kbps and I can't be annoyed with that. Thank you!!
Click to expand...
Click to collapse
Have you tried Updato?
Cyclone Emperor said:
Have you tried Updato?
Click to expand...
Click to collapse
yeah the download was awful on it for me.

Categories

Resources