Database Develop

Is it possible to go back to Stock - Completely - To sell the phone?

I have a Mint Condition HTC One phone I am trying to sell - Mostly just because I also own a Nexus 4 and love it - and decided I'd rather keep it and use the money on the HTC One on something else.
I'm having a hard time selling it because the "everything is unlocked" is making people scared to buy it.
It's S-OFF, SuperCID, TWRP 2.6.0.1, Bootloader Unlocked, Running 2.24 Firmware and Android Revolution 12.1, Sim Unlocked too.
It's originally a Rogers Canada HTC One
Is there any way (or guide) to completely make it stock again to help sell it? Any help would be appreciated.

Yep, just flash the Rogers RUU (if available) and then you're good to go! If there isn't one then use one of the Nandroids provided and then get the stock recovery and relock the bootloader

don't forget to go back to S-ON after flashing the RUU

herwegan said:
don't forget to go back to S-ON after flashing the RUU
Click to expand...
Click to collapse
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.

bigystyle84 said:
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
Click to expand...
Click to collapse
just download the RUU (sorry, don't know if there is one for your carrier), be sure to be s-off, and then run the RUU.exe or flash the RUU.zip.
the RUU will flash stock recovery, stock rom and i think it will even relock your bootloader. and then you'll be able to download OTA-updates again.
last step is to put it back to s-on and you should be done..

Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app

EnIXmA said:
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks
I'm S-OFF using the Revone Method
I'm on firmware 2.24 and HBoot 1.54 (Still S-Off though)
If anyone has time, can somebody give me a real quick overview on what I need to do? I'll buy ya a beer!
I'm not real familiar with HTC Devices - This was my first experience and to be honest, Right now I'm wishing I didn't do this if I knew before hand I was going to flip it so fast.

Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers

herwegan said:
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
Click to expand...
Click to collapse
You cant run the RUU with Super CID. You will have to change it to one that matches the RUU you choose before running it, but keep s-off. Then you should be able to use the tool as mentioned above or do all the things manually. You can use my guide if you like:
http://forum.xda-developers.com/showthread.php?p=43458497

Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)

Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!

bigystyle84 said:
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Click to expand...
Click to collapse
you could take the latest open europe RUU (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7), or take an AT&T one.. don't really know which one would be better for your situation you'll know it better
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Click to expand...
Click to collapse
this is also an option. you can flash this nandroid backup through cwm recovery. but then you'd have to manually install stock recovery and lock the bootloader/go back to s-on. why not :good:
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Click to expand...
Click to collapse
you can stay on 1.54 if everything works fine after flashing the older firmware. the "warning text" is related to this thread: http://forum.xda-developers.com/showthread.php?t=2316726
but if you've never installed a custom HBoot you don't have to worry about this when going back to s-on. just check once if the red warning text in the bootscreen is there.
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Click to expand...
Click to collapse
hope it works :fingers-crossed:

crushalot said:
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
Click to expand...
Click to collapse
Hey, I'm trying to do the same thing as OP, and this thread has been the closest thing to my issue. I'm trying to return everything on my phone to stock, however my Canadian carrier is Bell. Currently my HTC One has the bootloader unlocked, is rooted, TWRP recovery, and TrickDroid installed.
If I understand your instructions correctly, what I should do (given I want to restore using a nandroid backup) is:
1) S-Off my phone
2) Change the CID to CWS___001 and run the ATT RUU
3) Change the CID back to my original (BM_001 is what I think it is, do you know how I can make sure? What command to run for ADB?)
4) The Nandroid backup from http://forum.xda-developers.com/showthread.php?t=2207874&highlight=bell+update for my phone is for CWM (it's this one: M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5), does that mean I have to change my recovery from TWRP to CWM at this point?
5) Use fastboot to boot the recovery --> two questions regarding this, 1) why would I not install the .zip I downloaded from step 4? 2) where do I get the recovery.img? Just the one that is in the zip? In which case, shouldn't I also has to boot the boot.img or anything else?
6) I also want to upgrade the radio, should that be done last?
Thanks for all your help!
Lastly, I'm looking for a ROM to flash afterwards, I was wondering if you had any suggestions/know of a ROM that can allow me to use the swipe2sleep features, as well as hold the back touch button to force kill an app.

Just sell it on swappa. They love rooted unlocked modded phones.

[Q] going to stock fail... need 2.24.401.1 nandroid

I got myself in a bit of a dead zone here.
I have my HTC one. Its HTC__001 WWE Europe. It OTA upgraded to 2.24.401.1.
When I saw that you can convert to a GPE I really wanted to check it out specially after users reported success in getting OTA updates. But I quickly realized I needed S-Off and thats not available yet.
I decided to at least take it to a test drive with ARHD GPE 3.0. I downloaded the latest RUU for my device (1.28.401.7) thinking I would need that to get back to stock. I went and unlocked the bootloader at HTC dev. Flashed CWM recovery and flashed ARHD GPE 3.0. Played around with it for a bit and now when I needed to go back to stock.
RUU.exe file got stuck at updating signature then returned 155 unknown. I realized maybe its attempting to downgrade the bootloader so i looked around for a 2.24.401.1 RUU but its not available yet.
I looked at Nandroid backups and found 1.28.401.7 HTC__001 but its UK unbranded. When I restored this version it loaded up but my touch screen didnt work at all. I flashed back ARHD to get touch capability back.
So my question is... Any chance anyone can nandroid backup the stock 2.24.401.1 i need? How can I go to stock now? Am I stuck with custom roms untill atleast s-off or HTC decides 2.24.401.1 RUU should be made available?
Thanks!

+1

Are you s off?? Downgrade your hboot to 1.44 and then flash the ruu for your device....
Sent from my HTC One using xda premium

No unfortunately im s-on... Funny how being a good boy and being s-on HTC rewards me with no option to go back to stock...
Sent from my HTC One using xda app-developers app

LOL............ I am in same postion . want to go back to stock for updates but cant !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.

AllAboutTheCore said:
http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.
Click to expand...
Click to collapse
You cant s-off on hboot 154 yet. Unless I am mistaken.
Like op says we need a nandroid of firmware think that's only way until ruu is releasee ; (
Sent from my GT-I9100 using xda app-developers app

ipmanwck said:
You cant s-off on hboot 154 yet. Unless I am mistaken.
Like op says we need a nandroid of firmware think that's only way until ruu is releasee ; (
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
2 things:
1) I'll quote what I said, I never said S-Off was available .. "Obviously you'll need S-Off for Hboot 1.54 if/when it happens"
2) What I said above for going to stock is a way of doing it, a Nandroid is not the only way.

AllAboutTheCore said:
http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.
Click to expand...
Click to collapse
I actually did this and Im running it right now without problems...
But Im not sure id be getting OTAs as the bootloader main ver still says 2.24.401.1 and not 2.24.401.8. I dont think Mike made a 2.24.401.1 available.
Its a bit disappointing. Im fine with having my bootloader tampered and relocked and s-on as long as I got stock running like it should be. i dont understand why HTC gives you the option to unlock ur bootloader to play around with custom firmware but not allow you to go back to stock. im guessing the RUU is on the way but I have my doubts... Just like s-off.
Sent from my HTC One using xda app-developers app

ossman said:
I actually did this and Im running it right now without problems...
But Im not sure id be getting OTAs as the bootloader main ver still says 2.24.401.1 and not 2.24.401.8. I dont think Mike made a 2.24.401.1 available.
Its a bit disappointing. Im fine with having my bootloader tampered and relocked and s-on as long as I got stock running like it should be. i dont understand why HTC gives you the option to unlock ur bootloader to play around with custom firmware but not allow you to go back to stock. im guessing the RUU is on the way but I have my doubts... Just like s-off.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Nah, the stock firmware for 2.24.401.8 is not available yet, only a customised one which would require S-Off anyway. The method I mentioned is the only way at the moment to get as close to stock as possible without being able to go S-Off and flash an older RUU. When Mike gets hold of the stock firmware to post, I'm sure he will ... I can't see any 2.24 RUU's being available seeing that HTC are pushing for a 4.3 release by the end of September, so I'd wait anyways, unless you need to return your device for warranty purposes of course.
As for you getting OTA updates ... I haven't installed the .8 ROM but it shouldn't affect it as the base you are on is still an older base than what you'd be trying to update to but I'm not 100% on that as I haven't flashed it as my device is away for repair lol. I would imagine that the 2.24.401.8 firmware would be about soon enough and then you would be able to revert to stock with the newest base but obviously as you said yourself, without S-Off you wouldn't be able to wipe any trace of you flashing and modding.
I think HTC only allow you to unlock your bootloader because they can void so many warranties that way and bill for repairs lol ... Maybe I'm being cynical but I do agree that they could provide a stock RUU for people to return to stock, without all the hassle of S-Off or waiting months before any suitable RUU is available but sometimes you have to just suck it up and live with what we have lol

ossman said:
I got myself in a bit of a dead zone here.
I have my HTC one. Its HTC__001 WWE Europe. It OTA upgraded to 2.24.401.1.
When I saw that you can convert to a GPE I really wanted to check it out specially after users reported success in getting OTA updates. But I quickly realized I needed S-Off and thats not available yet.
I decided to at least take it to a test drive with ARHD GPE 3.0. I downloaded the latest RUU for my device (1.28.401.7) thinking I would need that to get back to stock. I went and unlocked the bootloader at HTC dev. Flashed CWM recovery and flashed ARHD GPE 3.0. Played around with it for a bit and now when I needed to go back to stock.
RUU.exe file got stuck at updating signature then returned 155 unknown. I realized maybe its attempting to downgrade the bootloader so i looked around for a 2.24.401.1 RUU but its not available yet.
I looked at Nandroid backups and found 1.28.401.7 HTC__001 but its UK unbranded. When I restored this version it loaded up but my touch screen didnt work at all. I flashed back ARHD to get touch capability back.
So my question is... Any chance anyone can nandroid backup the stock 2.24.401.1 i need? How can I go to stock now? Am I stuck with custom roms untill atleast s-off or HTC decides 2.24.401.1 RUU should be made available?
Thanks!
Click to expand...
Click to collapse
i got an nandroid backup for you fully stock unrooted : https://mega.co.nz/#!AUZGkKwC!EAfhUXYAgjpAR42jGzG_mhzWJjwcs1j7R_tm_HPMDAo

[Q] GPe reversal / Software Question

Hi guys,
i currently have a UK Vodafone HTC One MID PN071000 fully converted to GPe, unlocked and S-OFF through Revone. I'm looking to go back to stock as per the following thread:
http://forum.xda-developers.com/showpost.php?p=43460011&postcount=2
I can't find a Vodafone UK RUU but can find a European 1.28.401.7 version. In the above thread he states that if you can't find your carrier RUU to flash a 1.29 ROM.
So, if I flash the 1.44 HBOOT and then run the 1.28.401.7 RUU, will this bring me back to stock (sense) or do I need to find a 1.29 ROM?
I know these have been done to death a bit but I didn't want to annoy the OP of the above thread by adding yet more pages to it.
Thanks in advance for any help on this

I'd flash the 1.28.401.7 RUU to get back to 4.1.2 and then restore a Vodafone stock Nandroid backup (or your own one you made before doing anything )
Then change the CID back to VODAP001 if needed, change the MID back to the EU handset and flash the stock recovery again and you should be good to go...depending on the Nandroid you can find perhaps do they OTA updates with the stock ROM until you get to a comparable version you can restore a nandroid with (if that makes sense)

EddyOS said:
I'd flash the 1.28.401.7 RUU to get back to 4.1.2 and then restore a Vodafone stock Nandroid backup (or your own one you made before doing anything )
Then change the CID back to VODAP001 if needed, change the MID back to the EU handset and flash the stock recovery again and you should be good to go
Click to expand...
Click to collapse
Cheers Eddy,
unfortunately I was a plonker and never backed up but i'm fine with it being on the standard EU software rather than Vodafone's own.. just want sense back. Main reason for asking was unsure if there was a different hboot for software prior to 1.29.
thanks again

Eldwafio said:
Cheers Eddy,
unfortunately I was a plonker and never backed up but i'm fine with it being on the standard EU software rather than Vodafone's own.. just want sense back. Main reason for asking was unsure if there was a different hboot for software prior to 1.29.
thanks again
Click to expand...
Click to collapse
Just stay S-Off !!
Don't go back to S-On EVER otherwise you won't be able to use RUUs etc.

No plan to go s-on, just want sense back
Sent from my HTC One using Tapatalk 2

Gah! Poxy error 170. Will investigate tomorrow
Sent from my HTC One using Tapatalk 2

How can I return to stock on 1.54

I appear to be stuck. I have my TMO HTC one on 1.54 and can't flash it back to stock. Is there any way? I would have to revert it?

Which flash you can't acheive?
Are you using a guide?

Thanks for the response
I changed my firmware to .11 from .8. I have been using Android Revolution. In an effort to return it to stock completely (to see if that took care of a random Bluetooth issue) I changed my CID to T-mobile. Its still s-off. I would like to have it return to 100% stock and I was following the guide to return to 100% stock but I can't change my CID now that I am using 1.54. When I use the method to change the CID it fails out.

[Q] Where do I start?

So here's the deal: I bought a HTC ONE back when it was released and I've enjoyed every minute of it, I loved the stock rom - it was smooth and worked like a charm. I have a lot of experience with flashing ROMS, had quite a few HTC phones before this one, but so far haven't tried ANYTHING with the ONE.
I got the update to the latest Android and I noticed there's something about HBOOT 1.44 vs. 1.54 - I checked and I have the 4.2.2 ROM running HBOOT 1.54.
I really want to get into custom roms and start testing a few out; but I have no idea where to start.
Normally I'd pick a guide and work the steps but I'm hesitant now that I've read bits and pieces about this HBOOT thing - I'm not sure what I means, why people are bummed out because they have 1.54 (which I have).
So yeah, I have no idea where to start. Can somebody give me a rundown, some guidelines, what does HBOOT 1.54 mean for me, where do I start?
Thanks,
Michiel.

From what I've read, having HBOOT 1.54 basically means that you can't S-off your device (as this is only available for 1.44). This means that you won't have access to deeper customisation for your phone (flashing different firmware and changing CID). CID determines what region your phone belongs to so this translates to how early you can get official OTA's as some regions get updates earlier than others. Also, if you want to fully transform your phone into a Google Edition HTC One, this is only open to units with a specific CID.
As for firmware, not really clear on what the differences between firmwares are but you can still flash different radios which are a component of firmwares (thus getting some of the benefits of newer firmware anyway).
That being said, you can flash the whole range of custom ROMs and kernels available on these forums provided that you've unlocked your boot loader. Directions for this can be found on the HTC website.
If you want an optimised stock ROM, try ARHD Sense which is basically your stock ROM with many performance improvements (especially when it comes to signal). For more customisation on Sense, you can try ViperOne.
Honestly there are so many excellent ROMs here that you can easily lose days trying every single one. The Google Edition ROMs are excellent too.
Hope this helps!
Sent from my HTC One using XDA Premium 4 mobile app

Thank you both for detailed replies! This helped me ease my mind on the HBOOT-thing. Thanks!

What no one mentioned is that S-off allows you to remove the ****Tampered**** flag from the boot loader.
With S-off you can lock the boot loader. (With S-on it will show Re-Locked)
With S-off you can flash any RUU to return to stock. Without it you can only flash RUU's that match your CID and are newer than your current firmware.
These may not be important to you, but they're good to know before you jump in.
Sent from my HTC One using XDA Premium 4 mobile app

Michiel0211 said:
So here's the deal: I bought a HTC ONE back when it was released and I've enjoyed every minute of it, I loved the stock rom - it was smooth and worked like a charm. I have a lot of experience with flashing ROMS, had quite a few HTC phones before this one, but so far haven't tried ANYTHING with the ONE.
I got the update to the latest Android and I noticed there's something about HBOOT 1.44 vs. 1.54 - I checked and I have the 4.2.2 ROM running HBOOT 1.54.
I really want to get into custom roms and start testing a few out; but I have no idea where to start.
Normally I'd pick a guide and work the steps but I'm hesitant now that I've read bits and pieces about this HBOOT thing - I'm not sure what I means, why people are bummed out because they have 1.54 (which I have).
So yeah, I have no idea where to start. Can somebody give me a rundown, some guidelines, what does HBOOT 1.54 mean for me, where do I start?
Thanks,
Michiel.
Click to expand...
Click to collapse
All you have to do is unlock your bootloader via htcdev.com (note, this will wipe your data) and then flash a custom recovery. You can use this tool http://d-h.st/mas to simplify the process.

CoryTallman said:
What no one mentioned is that S-off allows you to remove the ****Tampered**** flag from the boot loader.
With S-off you can lock the boot loader. (With S-on it will show Re-Locked)
With S-off you can flash any RUU to return to stock. Without it you can only flash RUU's that match your CID and are newer than your current firmware.
These may not be important to you, but they're good to know before you jump in.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh sweet I think I found something helpful. I just got my HTC one 6 days ago. I'm s-off so no tampered tag. Do I need to change my cid to flash any ruu? Do I need s-on to flash ruu's? I'm with Rogers in Canada. No RUU for me but there are ota's. Can I flash a different ruu and then the Rogers ota to bring be back to stock? I have s off can I leave it off so if the hboot gets updated by a future ota it will be ok? Thanks for any help.
Sent from my HTC One using Tapatalk 4

sixty_oz said:
Oh sweet I think I found something helpful. I just got my HTC one 6 days ago. I'm s-off so no tampered tag. Do I need to change my cid to flash any ruu? Do I need s-on to flash ruu's? I'm with Rogers in Canada. No RUU for me but there are ota's. Can I flash a different ruu and then the Rogers ota to bring be back to stock? I have s off can I leave it off so if the hboot gets updated by a future ota it will be ok? Thanks for any help.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
No matter what, you should stay s-off, it does not affect OTA's or RUU's in any way whatsoever. To flash any RUU, you need to be with a cid of 11111111
It's not possible for you to flash an ruu for something else and then flash the rogers ota I don't think