As title
I want to try that I9070's baseband can use in I8160 or not.
Because I8160 BRI/TGY still can't update to 4.1.2
I tried to flash CM10.2 and it can work but no signal
So I think if I9070' baseband can use in I8160, maybe it will have signal...
I need I9070TGY's modemfs,efs backup and /lib/tee files
It is better if I can obtain 2.3.6 and 4.1.2 's modemfs
Thanks !
========
Sorry for my poor English
joe820730 said:
As title
I want to try that I9070's baseband can use in I8160 or not.
Because I8160 BRI/TGY still can't update to 4.1.2
I tried to flash CM10.2 and it can work but no signal
So I think if I9070' baseband can use in I8160, maybe it will have signal...
I need I9070TGY's modemfs,efs backup and /lib/tee files
It is better if I can obtain 2.3.6 and 4.1.2 's modemfs
Thanks !
========
Sorry for my poor English
Click to expand...
Click to collapse
Download I8160 from other country and flash it with Odin. But first check at your forum is it safe. Because if we flash I9070 on I9070P or I9070P on I9070 it cause HARDBRICK.
P.S. You already have CM10.1 for your phone. http://forum.xda-developers.com/showthread.php?t=2452315
Baseband from I9070 will not work, I am 99% sure.
shut_down said:
Download I8160 from other country and flash it with Odin. But first check at your forum is it safe. Because if we flash I9070 on I9070P or I9070P on I9070 it cause HARDBRICK.
P.S. You already have CM10.1 for your phone. http://forum.xda-developers.com/showthread.php?t=2452315
Baseband from I9070 will not work, I am 99% sure.
Click to expand...
Click to collapse
Thanks for reply.
I know that I8160 already have CM10.1, but I8160BRI(HongKong/Taiwan) still no have official 4.1.2.
If I flash official 4.1.2 from another region ,my phone will got baseband unknown and IMEI will disappear
Alright, keep use gingerbread until Samsung update I8160BRI to 4.1.2 or I buy any new phone.....
joe820730 said:
Thanks for reply.
I know that I8160 already have CM10.1, but I8160BRI(HongKong/Taiwan) still no have official 4.1.2.
If I flash official 4.1.2 from another region ,my phone will got baseband unknown and IMEI will disappear
Alright, keep use gingerbread until Samsung update I8160BRI to 4.1.2 or I buy any new phone.....
Click to expand...
Click to collapse
Same thing happen to our device when someone is on HK firmware (no baseband when other country fw is flased). Strange... Have no idea why.
Related
Hi Guys,
Since I am new, I cannot post on the development groups. I was installing a ROM on my friend's S Advance. Whenever I flash a ROM, I am able to install everything properly but I have lost my mobile signal completely . I cannot make calls or send messages, the SIM works fine on other phones. What could be the problem here?
In Phone Status, it shows :
Network : Unknown
Signal strength : 0 dBm 99asu
Mobile Network Type : Unknown:0
Service Status : Radio Off
I have an Indian version of the phone, Baseband : i9070DDLK2
I tried looking for Radio files to Flash, but cannot seem to find it anywhere on XDA,
Please please help me out. Thank You so much for reading. Please let me know how to make it work.
What ROM did you flash?
szzlgupta said:
What ROM did you flash?
Click to expand...
Click to collapse
Flashed this ROM :
http://forum.xda-developers.com/showthread.php?t=2324100
I tried flashing a few other ROMs too. Same issue with them.
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
szzlgupta said:
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
Click to expand...
Click to collapse
Whoah! Okay
I tried flashing a stock firmware over ODIN from a link with stock firmware files. Phone went into a bootloop. Could you please forward me to a link with the firmware I should flash? Thanks
Did you make a factory clean? It will boot up!
szzlgupta said:
Did you make a factory clean? It will boot up!
Click to expand...
Click to collapse
Yes. Factory reset in recovery then rebooted in download mode and flashed via Odin
What FW did you flash? 2.3.6 or 4.1.2 ?
szzlgupta said:
What FW did you flash? 2.3.6 or 4.1.2 ?
Click to expand...
Click to collapse
I tried flashing this :
I9070DDULP8_ODDULP8_India_Android_4.1.2 Since the following were the only 2 available for India on the XDA links and the others I found, I thought I'd give it a try :
REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD
REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD
Click to expand...
Click to collapse
Then I figured out it won't work for i9070DDLK2 so I'm trying to reflash to stock 2.3.6
If you know where I could find a 4.1.2 link for i9070DDLK2, do let me know. I'd be grateful
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
szzlgupta said:
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
Click to expand...
Click to collapse
Okay. Thanks for clarifying. All these baseband versions on Samsung have me thoroughly confused.
I am pretty new to Samsung devices when it comes to rooting. Really appreciate you clarifying it.
Actually I had jumped from Firmware 2.3.6 to a custom ROM on 4.2.2 and then tried jumping back to Firmware 4.1.2 and hence the bootloop was occurring. (It's kind of making some sense now )
Thank you so much for clarifying, didn't read it clearly on blogs I guess, my bad. Firmware 2.3.6 is on download. I'll do a clean install of the firmware on ODIN and then try 4.1.2 and then custom ROMs. Thanks
Yes. And don't need to say 'Thanks', just HIT it!
hello...
i have GT-I9070 with zslk3 firmware and its gingerbread
i want to update it to jelly bean
so what firmware should i use?can i use firmware from other country?
ndandau98 said:
hello...
i have GT-I9070 with zslk3 firmware and its gingerbread
i want to update it to jelly bean
so what firmware should i use?can i use firmware from other country?
Click to expand...
Click to collapse
u can use other countrys firmware; if ur handset is NOT carrier based.
ndandau98 said:
hello...
i have GT-I9070 with zslk3 firmware and its gingerbread
i want to update it to jelly bean
so what firmware should i use?can i use firmware from other country?
Click to expand...
Click to collapse
If your phone is unlocked and is not carrier branded then you're free to install any (good) Jellybean firmware...
But if your phone is carrier branded (like Claro, Sprint, Verizon, Vodaphone, Orange, etc) then you have to flash their respective Jellybean firmware...
Sent from my GT-I9070
Yes you can use firmware from another country buy only if your phone is not carrier branded, you can flash a JB firmware or rom if you like.GB is kind of outdated
i think my phone is unlocked cause i can use it with indonesian carrier...i bought my phone in HK...
thanks for your respond guys...
Sent from my GT-I9070 using Tapatalk 2
Just don't flash it with China/Hong Kong firmwares. They caused hardbrick and imei lost in some devices.
arffrhn said:
Just don't flash it with China/Hong Kong firmwares. They caused hardbrick and imei lost in some devices.
Click to expand...
Click to collapse
I just downloaded 2 firmware...from indonesia and hongkong...flashed indibesian vrsion and its says fails...but not with hk version its passed but i got problem with screen calibration...any suggestion firmware?
ndandau98 said:
I just downloaded 2 firmware...from indonesia and hongkong...flashed indibesian vrsion and its says fails...but not with hk version its passed but i got problem with screen calibration...any suggestion firmware?
Click to expand...
Click to collapse
WHY did you flash Honkong - he told you not to flash it.
arffrhn told: Just don't flash it with China/Hong Kong firmwares. They caused hardbrick and imei lost in some devices.
Now you will probably have problem when you try to use another firmware...,
Use this to downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
But people said that Honkong version can't be downgraded: http://forum.xda-developers.com/showthread.php?t=2516926
shut_down said:
WHY did you flash Honkong - he told you not to flash it.
arffrhn told: Just don't flash it with China/Hong Kong firmwares. They caused hardbrick and imei lost in some devices.
Now you will probably have problem when you try to use another firmware...,
Use this to downgrade: http://forum.xda-developers.com/showthread.php?t=2195673
But people said that Honkong version can't be downgraded: http://forum.xda-developers.com/showthread.php?t=2516926
Click to expand...
Click to collapse
I flashed before he reply it...so what must i do?downgrade it firs right?
ndandau98 said:
I flashed before he reply it...so what must i do?downgrade it firs right?
Click to expand...
Click to collapse
Yes. But I am affraid that you will get problems. Lot of people told that Honkong Firmware can't be downgraded... Try.
shut_down said:
Yes. But I am affraid that you will get problems. Lot of people told that Honkong Firmware can't be downgraded... Try.
Click to expand...
Click to collapse
So what FW must I use? Stock HK gingerbread?or another country?u have suggestion?
ndandau98 said:
So what FW must I use? Stock HK gingerbread?or another country?u have suggestion?
Click to expand...
Click to collapse
As I know we can downgrade just with those files in that guide I gave you. And you can't use other Firmware to downgrade.
Try with that guide, if that fails - I have no idea how to downgrade HK FW.
shut_down said:
As I know we can downgrade just with those files in that guide I gave you. And you can't use other Firmware to downgrade.
Try with that guide, if that fails - I have no idea how to downgrade HK FW.
Click to expand...
Click to collapse
Last time i downrage my phone with ZSLK3 and its work...but i dont know with other FW...or i just downgrade with ZSLK3 GB and re upgrade with another country FW with JELLYBEAN?
ndandau98 said:
Last time i downrage my phone with ZSLK3 and its work...but i dont know with other FW...or i just downgrade with ZSLK3 GB and re upgrade with another country FW with JELLYBEAN?
Click to expand...
Click to collapse
I am not sure, I never had that FW on my phone - I just read other people expirience. I know that when I tried to downgrade just with my country GB I got stuck on bootloop - needed to use that files from guide.
shut_down said:
I am not sure, I never had that FW on my phone - I just read other people expirience. I know that when I tried to downgrade just with my country GB I got stuck on bootloop - needed to use that files from guide.
Click to expand...
Click to collapse
And then after downgrade it with FW in that guide are u uprage your phone to jelly bean or not?if yes...what FW are u use?
ndandau98 said:
And then after downgrade it with FW in that guide are u uprage your phone to jelly bean or not?if yes...what FW are u use?
Click to expand...
Click to collapse
My country Serbia Firmware. I use it since it was out. Once I made mistake and I flashed GB over JB - I got that bootloop. And I reflashed JB.
So after you go back to GB you go to JB just like you did now.
shut_down said:
My country Serbia Firmware. I use it since it was out. Once I made mistake and I flashed GB over JB - I got that bootloop. And I reflashed JB.
So after you go back to GB you go to JB just like you did now.
Click to expand...
Click to collapse
What jellybean FW should i use?
ndandau98 said:
What jellybean FW should i use?
Click to expand...
Click to collapse
I think that you can't use any other than that HK now - I read people can't have signal with any other. But search little to see if someone manage to install other FW.
shut_down said:
I think that you can't use any other than that HK now - I read people can't have signal with any other. But search little to see if someone manage to install other FW.
Click to expand...
Click to collapse
Actualy,now i'm on jellybean with ZSME3 HK...and i only got problem with horizontal sensor...and someone says that i must downgrade my phone to GB and recalibrate?
are there any other ways to recalibrate it without downgrading?if yes i think i dont need to downgrade cause i dont have other problem til now
ndandau98 said:
Actualy,now i'm on jellybean with ZSME3 HK...and i only got problem with horizontal sensor...and someone says that i must downgrade my phone to GB and recalibrate?
are there any other ways to recalibrate it without downgrading?if yes i think i dont need to downgrade cause i dont have other problem til now
Click to expand...
Click to collapse
I know why you need to downgrade, I read both threads. Yes, you will need to use GB to calibrate it. As R_a_z_v_a_n told you it that thread.
Hello guys, i will explain the story in order, sorry for my bad Grammar.
first i have the official GTI9070 but i forgot the baseband (GB)
then i accept software update that appear in notification bar, my baseband become I9070DXLK2 (GB)
and i see there's CM11 out that can make kit kat running in I9070.
but it requires root to install CMW / TWRP..
so hard to find root zip for DXLK2, and then i found one full ROM rooted then flash it with odin.
my baseband still I9070 (GB) but rooted (binary counter++)
after that i flash TWRP with odin too.
then i try flashing CM11 with TWRP.
it success, but no mobile network.
i search at this forum and someone say "no mobile network happen because flashing from GB (2.3.x) directly to KK (4.4.x)"
he said first update from GB to official samsung JB.
the problem, there's no official samsung JB update for my country/region (DXLK2)
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
PS: my device is Samsung Galaxy S Advance GT-I9070 (Indonesian)
amaDetoir said:
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
Click to expand...
Click to collapse
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
R_a_z_v_a_n said:
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
Click to expand...
Click to collapse
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Search JB on www.samsung-updates.com.
Powered by CM11
amaDetoir said:
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Click to expand...
Click to collapse
Or maybe removed. Try on samsung-updates.com or sammobile.com
In Canada, have XXLK2 (Africa?). Want JB, use UK version?
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
coghlan said:
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
Click to expand...
Click to collapse
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Flashing worked...once I found a .zip file
R_a_z_v_a_n said:
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Click to expand...
Click to collapse
I had a lot of trouble trying to get the samsung-updates.com download to work (used the free one, which either didn't start most of the time or died during download). Eventually, I took the filename (for Britain) and Googled it, and found a download site that let me download it (required 3 hours).
Armed with the .zip file and ODLIN, it worked like a charm. All my installed apps and data survived, which surprised me. I thought this would be a vanilla install.
guys, i need some help. i am from romania, and my Galaxy s advance is running stock 2.3.6, and i want to upgrade it to jelly bean, but in kies , when it connects it says me that i have the latest firmware..... what should i do?
ok...so i managed to flash a firmware with odin, and now its hard bricked i think, i cant do anythink with it, no recovery, no download, no charging... my phone is gt i9070P, and i flashed a I9070 firmware from italy...help pls
Go to service center or try To find somewhere a JTAG. Google it.
thanks man... i will try...it's the only way? it can't be done with a usb jig, and after that , flash a stock firmware?
cj430s said:
.. it can't be done with a usb jig, and after that , flash a stock firmware?
Click to expand...
Click to collapse
Yes it can be. USB JIG is only the way to boot your phone in Download Mode. After that, your only step is to flash thru Odin stock firmware.
Good luck
ok, thanks... i will try...but how can i find a jelly bean firmware for romania? i saw that are for regions,and i dont know wich one to use, i want it to work on orange romania...if you can give me a link or some advice, i just want stock jelly bean unlocked on my I9070P
Search on sammobile/Samsung-updates for I9070P firmwares.
R_a_z_v_a_n said:
Search on sammobile/Samsung-updates for I9070P firmwares.
Click to expand...
Click to collapse
ok , but there i can't find one for romania...wich region should i choose for romania?
cj430s said:
ok , but there i can't find one for romania...wich region should i choose for romania?
Click to expand...
Click to collapse
It should be all good as long as you DO NOT take Hong Kong.
Not sure about P versions but non-P HK versions were reported as messing up - possible bricks.
At 1st everyone who wanted early try used leaked russian JB (before there were official ones for other regions) - it worked pretty much all over the world
Sent from my TF300T using XDA Free mobile app
ok , i will try russian version... after i will get my phone from service, due to that hard brick
anyway, thank you very much for helping me
question
my friend thinking about to get galaxy s3 GT-I9305T but there is not 4.4.2 in australian I am wondering if I flash the Germany 4.4.4. does it still work same?
I know I have to change the language lol
http://www.sammobile.com/firmwares/download/35546/I9305XXUFNI3_I9305DBTFNI3_DBT.zip/
but problem
which phone look at GT-I9305t got not 4.4.4 but GT-I9305 got 4.4.4
Will firmware for the I9305 work on the I9305T?
carlo67 said:
question
my friend thinking about to get galaxy s3 GT-I9305T but there is not 4.4.2 in australian I am wondering if I flash the Germany 4.4.4. does it still work same?
I know I have to change the language lol
http://www.sammobile.com/firmwares/download/35546/I9305XXUFNI3_I9305DBTFNI3_DBT.zip/
but problem
which phone look at GT-I9305t got not 4.4.4 but GT-I9305 got 4.4.4
Will firmware for the I9305 work on the I9305T?
Click to expand...
Click to collapse
I think you can flash, there are people who have flashed firmware for I9305N to I9305 and works perfectly.
I think that you can install the DBT 4.4.4 version on your phone.
Just try it.
viktorak said:
I think you can flash, there are people who have flashed firmware for I9305N to I9305 and works perfectly.
I think that you can install the DBT 4.4.4 version on your phone.
Just try it.
Click to expand...
Click to collapse
Will firmware for the I9305 work on the I9305T?
Yes,my opinion is that Rom 4.4.4.DBT will works on your terminal.
viktorak said:
Yes,my opinion is that Rom 4.4.4.DBT will works on your terminal.
Click to expand...
Click to collapse
ok
can you give me link to this rom please
Hi, carlo 67,the link it's the same you posted first from Sammobile firmware updates.Flash true Odin.
viktorak said:
Hi, carlo 67,the link it's the same you posted first from Sammobile firmware updates.Flash true Odin.
Click to expand...
Click to collapse
ok
I would like to know if I flash it, does it swipe clean or just upgrade it?
i want just upgrade,
carlo67 said:
ok
I would like to know if I flash it, does it swipe clean or just upgrade it?
i want just upgrade,
Click to expand...
Click to collapse
It is always recommended to make a copy of the EFS folder and backup System.
Here:http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
is how to make backup your EFS folder,not necesary to be root.
viktorak said:
It is always recommended to make a copy of the EFS folder and backup System.
Here:http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
is how to make backup your EFS folder,not necesary to be root.
Click to expand...
Click to collapse
hey
question I got galaxy s3 I flashed the philz_touch_6.48.4-i9305.tar done ok but when I go to recovery mode but it was back to stock recovery