Related
hi all,
i have an xperia z c6603 lcoked,
i successfuly installed cwm on it, after that i tried to install a custon rom on it,
i enter recovery, wipped data/cache and installed from zip the zip
it wrote installed successfuly, without poping up the aroma installer (maybe this is my first problem, maybe i broked the stock rom )
but now when i'm trying to turn on / enter recovery nothing happend, only a blinking red led even when i puted it on charge
how can i fix this problem
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
thanks for your answer,
i have the blue led but usb not detected as debugging mod, will this work ?
should i worry about the led blinking ? i was on flashing roms on my old S3 , sony is more complicated ...
thanks dude
Zorua said:
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
i still have the missing driver s1boot i installed the flashboot drivers pack , but still missing.
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
zirconias said:
i still have the missing driver s1boot i installed the flashboot drivers pack , but still missing.
Click to expand...
Click to collapse
Download sony update service it has the drivers needed.
Sent from my C6603 using xda premium
Zorua said:
Hold volume up + power for 10 seconds, then release them. Now, hold volume up and plug it into a PC via USB. You could probably use Flashtool now to flash a FTF file of your region. That should fix it.
Click to expand...
Click to collapse
Thank you very much "Zorua", after trying to flash a Rom, I stayed stocked with the red led, without being abble to boot or access CWR, and you suggestions worked!
Cheers from Portugal!
I flashed CM 10.2 using CWM on my Xperia TL (LT30AT) and when I rebooted it, the phone wouldn't turn on. The screen stays black, although the orange LED comes on when I plug it in. When I press the power button if it's unplugged, the LED flashes orange twice and turns off. I tried using Flashtool to flash the stock ftf, but it doesn't stay in flashmode long enough for it to flash it completely. Please help, I need this phone!
fezzisfezz said:
I flashed CM 10.2 using CWM on my Xperia TL (LT30AT) and when I rebooted it, the phone wouldn't turn on. The screen stays black, although the orange LED comes on when I plug it in. When I press the power button if it's unplugged, the LED flashes orange twice and turns off. I tried using Flashtool to flash the stock ftf, but it doesn't stay in flashmode long enough for it to flash it completely. Please help, I need this phone!
Click to expand...
Click to collapse
have you unlocked the bootloader?
If not then repair with pccompanion.
If you have flash a stock kernel first then flash with a stock ftf in flashtool.
gregbradley said:
have you unlocked the bootloader?
If not then repair with pccompanion.
If you have flash a stock kernel first then flash with a stock ftf in flashtool.
Click to expand...
Click to collapse
My PC won't recognize it, and it won't stay in flashmode long enough to flash a stock kernel.
Now it's looping the Sony startup screen..
The bootloader is locked.
Then that's your problem,
You cannot flash cm on a locked bootloader.
Charge the phone for 24 hours then use pccompanion with the correct drivers to repair it
Sent from my C6903 using xda premium
fezzisfezz said:
I flashed CM 10.2 using CWM on my Xperia TL (LT30AT) and when I rebooted it, the phone wouldn't turn on. The screen stays black, although the orange LED comes on when I plug it in. When I press the power button if it's unplugged, the LED flashes orange twice and turns off. I tried using Flashtool to flash the stock ftf, but it doesn't stay in flashmode long enough for it to flash it completely. Please help, I need this phone!
Click to expand...
Click to collapse
Hey,
Were you able to solve this issue. I have the same issue and I was trying to load pacman ROM on to my phone. The phone vibrates sometimes when pressing the power button. On long press of power + vol up, it does 3 vibrations and thats all. I tried "Emma" (the Sony flashtool) and it recognized my phone. But, the ATT model of xperia TL's bootloader cannot be unlocked and hence was not able to use the flashtool. the PC companion too detects the phone, but when i try to repair, it starts the process but says there is not update for the model. Is there any other manual way in which this issue can be resolved. Any thoughts would be much appreciated.
Thanks.
Use sony update service
Sent from my LT30p using XDA Premium 4 mobile app
Or use the original XDA version of Flash tool from the first post in the dev section to flash a stock ftf
Sent from my C6903 using XDA Premium 4 mobile app
Actually, the problem could be the same as for the Xperia T.. the cm 10.2 boot.img are corrupt.. I had the problem yesterday and needed to flash a boot.img from 11. november out of a nightly to get the 10.2 RC1 working.. You should try with fastboot. On an Xperia T you should force a shutdown with power button and volume up button pressed until it vibrates 3 times, and the boot into fastboot. I got it working but was not convinced with 10.2 RC1 cm.. I had the same bug as in an 10.1.3 stable : freezes when tilting the screen in graphical apps..
dawnii.lu said:
Actually, the problem could be the same as for the Xperia T.. the cm 10.2 boot.img are corrupt.. I had the problem yesterday and needed to flash a boot.img from 11. november out of a nightly to get the 10.2 RC1 working.. You should try with fastboot. On an Xperia T you should force a shutdown with power button and volume up button pressed until it vibrates 3 times, and the boot into fastboot. I got it working but was not convinced with 10.2 RC1 cm.. I had the same bug as in an 10.1.3 stable : freezes when tilting the screen in graphical apps..
Click to expand...
Click to collapse
Can't be that because xperia tl bootloader cannot be unlocked
Sent from my LT30p using XDA Premium 4 mobile app
nice to meet you guys,
i am new here.
it starts with,
when i want to flash new rom it works perfectly fine.
but after finishing installation of rom it asks for reboot...
after rebooting there is no coming back to nothing in screen
i have serious problem with my Xperia SP
hard brick problem
no vibrate
no light
no chargin sign
flashtool
pc companion
volum up-down with usb cable...an
with power button
nothing working...
please , help
Before My SP has-
DoomKernel V3
CWM - 6.0.3.7
TWRP- 2.0.x.x
ROM-
Existenz v 1.3.7
(camera problem that's why i was tryin to install another rom called Mahdi-v2.0)
Now charging till 3hours.....
but there is absolutly no response from my Phone........
please, somebody help me about my phone......
also i am tryin and serching in xda for something usefull and responsed with my phone.....
thank you very much,
and.
sorry for taking your valuable time
SEUS
Have you tried SEUS for repairing your software? Always works for me
won't help with SUS
Nanostray said:
Have you tried SEUS for repairing your software? Always works for me
Click to expand...
Click to collapse
tried everything include Sony Update Service (SUS)
but.... my problem is
phone get nothin (Vibrate, Light)
if i pressed Volume down with power
or volume down with USB through Flashtool
is there anything could i try??
thanks for helpin, mate!!
Do you unlock your bootloader first?
Sent from My XSP
Solution..
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Pulsa said:
Do you unlock your bootloader first?
Sent from My XSP
Click to expand...
Click to collapse
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
shojeep said:
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
Click to expand...
Click to collapse
Isn't Fastboot mode volume +?
sid8840 said:
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Click to expand...
Click to collapse
Really appriciate for your helping comments....
but.
how do i suppose to do that, where no power no led and no response from FlashTools....?
please give some instruction Step by Step
I already have CM11 (4.4) kitkat with Gapps.
but how to give the kernel for cm11 4.4?
thnks...mate
Hey, first to answer your question, the CM 11 kernel is inside the ROM .zip called "boot.img". So just to understand you, you have had eXistenZ Ultra 1.3.7 (which is in case no ROM but a kind of update) and then you Installed mahdi ROM over it, right? And now your phone is like dropped into a pool. If so the chance to reanimate your phone is unfortunately very low. I heard about a USB-JIG and J-TAG which can help but don't know if that works.
Nevertheless, I hope I could help a little bit and good luck
Sent from my C5303 using xda app-developers app
try while pressing volume up and usb connected press the powrr button for a while
Sent from my C5303 using xda app-developers app
Nanostray said:
Isn't Fastboot mode volume +?
Click to expand...
Click to collapse
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
keep faith
shojeep said:
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
Click to expand...
Click to collapse
I'm sorry to hear none of it works, but don't give up yet mate, I'm sure someone here on the forum can help you!
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
sid8840 said:
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
Click to expand...
Click to collapse
after charging with wall charger now device showing the red light.......
now what to do?
Press the offbutton behind the backflip until it vibrate 3 times. Then press vol+ and put the usb cabel into phone. Now there is a blue light! You are in fastboot mode and the phone is ready to flash the bootimage. that's all you have to do! Good luck!
Janith Olagama said:
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
thnks for replying
but when i open cmd and type
fastboot flash boot boot.img and press enter
<waiting for device>
then while i press volume down either up it's blinkd the red light.....repetadly...
with flashtools i got nothing also...
please, replay
If red light comes after changing... That means your phone is not bricked
sent from my galaxy grand duos
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Salo-S said:
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Click to expand...
Click to collapse
thank you very much for replying
but...still got the problem.....
"hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7."
there is nothing appear on my windows screen, device manager, safe remove connectivity (also i have all the drivers installed adb/google-universal/sony pcc/sony update.
everything was closed....
after that....
there is red light appera on my mobile and stand by 2mins
in this 2 mins....i opend as you say-
"and see if the phone is being detected by FlashTool."
but in my flash tool screen i got-
"25/007/2013 00:07:24 - INFO - <- This level is successfully initialized
25/007/2013 00:07:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/007/2013 00:07:28 - INFO - Device disconnected
"
(2 mins finished)
and everything off again......(still connected with USB to PC)
no light .. no vibrate.
what to do now?
please, reply.
thanks for your helping advices and comments.....
In my Xperia Z, I am using Infected Builds Cyanogenmod 12.1 Lollipop rom
All things like Usb debugging, ADB, fast boot are working but that flash mode is not working......
when I press Vol down while connecting it turns Green but suddenly goes into red, I tried these things below
1) Using Flashtool
selecting flash mode then the ftf file and I waited for the notification to appear connect your phone
then I connected my phone pressing vol down again it turns into green but suddenly goes into Red
2) Using PC companion
I tried Repair Option, but that one also said me to connect my phone in flash mode
I also tried pressing vol up+ power button for a while to occur three vibrations (i.e complete shutdown) thn tried connecting to my pc while pressing vol down
3) Using Fast boot
I tried to flash Original boot.img but that too didnt work I dont know what else to do............
I am able to install new roms via recovery but I want install Original Stock Rom but Flashmode is not working If Anyone knows how to solve this prob please help me..............
kathir10395 said:
In my Xperia Z, I am using Infected Builds Cyanogenmod 12.1 Lollipop rom
All things like Usb debugging, ADB, fast boot are working but that flash mode is not working......
when I press Vol down while connecting it turns Green but suddenly goes into red, I tried these things below
1) Using Flashtool
selecting flash mode then the ftf file and I waited for the notification to appear connect your phone
then I connected my phone pressing vol down again it turns into green but suddenly goes into Red
2) Using PC companion
I tried Repair Option, but that one also said me to connect my phone in flash mode
I also tried pressing vol up+ power button for a while to occur three vibrations (i.e complete shutdown) thn tried connecting to my pc while pressing vol down
3) Using Fast boot
I tried to flash Original boot.img but that too didnt work I dont know what else to do............
I am able to install new roms via recovery but I want install Original Stock Rom but Flashmode is not working If Anyone knows how to solve this prob please help me..............
Click to expand...
Click to collapse
try changing the file extension from .ftf to .zip and flash via recovery
natibongo said:
try changing the file extension from .ftf to .zip and flash via recovery
Click to expand...
Click to collapse
I tried it, its not working
kathir10395 said:
I tried it, its not working
Click to expand...
Click to collapse
Then perform factory reset and try again by enabling USB debugging and unknown sources
Hello,
I wanted to flash TWRP into my Z1 C6903 so I downloaded latest TWRP img with official TWRP app and tried flashing it with RASH - Flash tool for Android. The tool stated that the flash was successful so I proceeded to reboot into recovery with the same app. The phone immediately shut down and wouldn't boot back up to neither Android or recovery. It would vibrate once when holding the power button, holding power + volume up would do nothing and phone would not be recognized by PC and even plunging it into wall would do nothing. I tried disconnecting the batter, plunging it to wall and connecting the battery back on which only made LED blink red and device still be not recognized by PC. Can someone help me how to unbrick my phone?
Thank you.
UnsuccessfulScreenRepair said:
Hello,
I wanted to flash TWRP into my Z1 C6903 so I downloaded latest TWRP img with official TWRP app and tried flashing it with RASH - Flash tool for Android. The tool stated that the flash was successful so I proceeded to reboot into recovery with the same app. The phone immediately shut down and wouldn't boot back up to neither Android or recovery. It would vibrate once when holding the power button, holding power + volume up would do nothing and phone would not be recognized by PC and even plunging it into wall would do nothing. I tried disconnecting the batter, plunging it to wall and connecting the battery back on which only made LED blink red and device still be not recognized by PC. Can someone help me how to unbrick my phone?
Thank you.
Click to expand...
Click to collapse
Magic keys for booting to recovery are either:
Hold Vol down and power
release Power when device vibrates, keep holding Vol down
hold Vol down until in recovery
Or:
Power on
if LED blinks press Vol up
If that shouldn't work there's fastboot (only with bootloader unlocked before) or sony flashtool. Just flash latest sony firmware and you should be fine.
There are enough threads concerning this
115ek said:
Magic keys for booting to recovery are either:
Hold Vol down and power
release Power when device vibrates, keep holding Vol down
hold Vol down until in recovery
Or:
Power on
if LED blinks press Vol up
If that shouldn't work there's fastboot (only with bootloader unlocked before) or sony flashtool. Just flash latest sony firmware and you should be fine.
There are enough threads concerning this
Click to expand...
Click to collapse
That doesn't work, the phone doesn't respond to any inputs from buttons.
UnsuccessfulScreenRepair said:
That doesn't work, the phone doesn't respond to any inputs from buttons.
Click to expand...
Click to collapse
Then Flashtool is your friend. You have to reflash the Sony Software.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/