Hello,
Kudos to all the nice folks here for the CM mod and updates.
My Nook HD+ has battery issues and was told to send it back to B&N. I took a backup of the stock ROM before installing CM but I'm unable to find it :crying:
I've searched a lot for this and would really really appreciate a link to download the ROM and copy to the microSD card.
I believe I just need the "clockworkmod" folder on the microSD card, right? If not, it would be great to have quick steps.
Thanks again for your time..
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks a lot for your prompt response, leapinlar.
I downloaded "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).zip" and extracted it to get "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img" which I burned to the microSD card using "Win32DiskImager"
And then, I copied "NookHDplus-factory-2.1.1-plain-stock.zip" file to the card. I tried inserting this card to the Nook HD+ device but it just boots to CM instead of showing options to restore.
I believe I'm missing something. I'm so sorry to bother you but would greatly appreciate if you could spare a few moments to point me in the right direction. It would be immensely helpful.
Thanks so much again for responding.
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks again, leapinlar.
I tried the alternate procedure and did the following:
1. Used "SDFormatter" to format the card and used "EaseUS Partition Master" to make the single partition on the microSD card "active"
2. Copied files making sure to copy "MLO" file first before copying the rest. (Please refer to attachment for the files that were in the card)
I was able to complete the "install from SD card" option and it finished with the following message:
Code:
Random Offset: 0xcb
Boot Files...
Boot Files...
Install Complete.
When I tried rebooting the device, Nook HD+ seems to load stock but gets stuck at 99% forever. Not sure how to proceed now. Can I just go ahead and return the device or should I bring it to working condition?
Thanks again for sparing your time, leapinlar.. Greatly appreciate it.
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
just to confirm
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
banditsw said:
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
Click to expand...
Click to collapse
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
banditsw said:
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
Click to expand...
Click to collapse
I am talking about booting to CWM and selecting factory reset on the main menu. That will wipe all installed apps and settings on whatever is installed on internal memory.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks so much, leapinlar. That worked!
adding to this
muchcalmer said:
Thanks so much, leapinlar. That worked!
Click to expand...
Click to collapse
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
gomavs123 said:
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
Click to expand...
Click to collapse
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
gomavs123 said:
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
Click to expand...
Click to collapse
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
gomavs123 said:
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
Click to expand...
Click to collapse
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
brux4me said:
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
Click to expand...
Click to collapse
That is correct, there is no cyanoboot logo with rev2. And rev2 works perfectly as root.
What I mean by no removed file protection is that with rev2 you cannot change any files in /system without it being detected and on the next boot it resetting itself to pure stock with no root. With rev3 that file protection for /system is removed, but it shows the cyanoboot logo. It is a trade off.
If you want rev2 I can repost the link.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So, I have used every trick you have posted to recover or install a new rom. After I install the rom and GAPPS with the bootable SD card, I restart and it just sits on the NOOK screen. I did notice I get a this: INSTALLING UPDATE / Random OFFSET: 0x26d / Boot Files...Boot Files...
The Random Offset number changes each time I try to install the rom.......any ideas?
i was rooted with cm10 and mistakenly reset my nook hd+ to factory settings. It is now stuck at startup to 99%. How can I rescue my Nook?
stevek28 said:
i was rooted with cm10 and mistakenly reset my nook hd+ to factory settings. It is now stuck at startup to 99%. How can I rescue my Nook?
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and install the plain stock zip from item 6 followed by a CWM factory reset. That will take you back to plain unrooted stock so you can start over.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Last night I flashed my new hd+ following verygreen's instruction, replaced the recovery to TWRP,installed cm10.1.
Now I want to return to stock and change TWRP to original recovery,can anyone help me?Thanks.
I tried another post from verygreen,it can only install stock on sdcard and can not update to a new version.
applexx said:
Last night I flashed my new hd+ following verygreen's instruction, replaced the recovery to TWRP,installed cm10.1.
Now I want to return to stock and change TWRP to original recovery,can anyone help me?Thanks.
I tried another post from verygreen,it can only install stock on sdcard and can not update to a new version.
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature and flash one of my plain stock zips from item 6. It will replace the recovery too. Be sure to factory reset with CWM.
Sent from my SCH-i705 using XDA Premium HD app
I need to return mine as the bezel is coming away badly :crying:
followed the instructions here to the letter
http://forum.xda-developers.com/showpost.php?p=49593481&postcount=1
there is a factor image back up on the SD card I did the cyan with
Is it just wipe and restore backup ?
Your best solution is to go to my HD/HD+ CWM thread linked in my signature and flash the plain stock zip from item 6 there. Also do a factory reset with CWM. The problem with doing the restore of the backup is that does not put stock recovery back and the plain stock zip does.
Sent from my BN NookHD+ using XDA Premium HD app
I've been using CyanogenMod 11 for a while, and love the pure Android experience it's delivered. However, should I want/need to revert to the stock backup I've made, will this replace CWM and Cyanoboot with the stock bootloader, and will I have to go through the process of rooting it again?
Restoring a CWM stock backup will replace the bootloader with the one from the backup but will not replace CWM. If you rooted stock before you backed it up, it will be rooted after restoring it. And if you used the rev3 of Universal Root (which uses cyanoboot), the cyanoboot bootloader is restored too. If you had not rooted stock, the stock bootloader without root is restored, but CWM remains.
But if you go back to stock by flashing the plain stock zip from my HD/HD+ CWM thread, item 6, it is taken back to plain stock with no root and with stock bootloader and stock recovery. This is the option you should use if you want back to pure stock to either return it to B&N or give/sell to someone else.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Restoring a CWM stock backup will replace the bootloader with the one from the backup but will not replace CWM. If you rooted stock before you backed it up, it will be rooted after restoring it. And if you used the rev3 of Universal Root (which uses cyanoboot), the cyanoboot bootloader is restored too. If you had not rooted stock, the stock bootloader without root is restored, but CWM remains.
But if you go back to stock by flashing the plain stock zip from my HD/HD+ CWM thread, item 6, it is taken back to plain stock with no root and with stock bootloader and stock recovery. This is the option you should use if you want back to pure stock to either return it to B&N or give/sell to someone else.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I've gathered all the tools, including the stock image, but now I'm getting Status 7 with CWM, even with the backup I've made. Is there a way to get around this?
chromiumfan said:
I've gathered all the tools, including the stock image, but now I'm getting Status 7 with CWM, even with the backup I've made. Is there a way to get around this?
Click to expand...
Click to collapse
You are probably using too new of a CWM. To flash the stock zip it needs to be older than v6045.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You are probably using too new of a CWM. To flash the stock zip it needs to be older than v6045.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Actually, you may disregard that previous message. I've got it to install, but I'm stuck on the white screen with the NOOK logo, and it reads 99% underneath. I've been waiting approx. 15 minutes.
chromiumfan said:
Actually, you may disregard that previous message. I've got it to install, but I'm stuck on the white screen with the NOOK logo, and it reads 99% underneath. I've been waiting approx. 15 minutes.
Click to expand...
Click to collapse
Did you remember to do the factory reset after flashing the stock zip?
Sent from my BN NookHD+ using XDA Premium HD app