[Q] Status 7 Error, No backup ROM - One (M7) Q&A, Help & Troubleshooting

I need help with my HTC One, I am stuck on Status 7 error and I don't have a backup ROM to restore into. What do I do?

m0usey929 said:
I need help with my HTC One, I am stuck on Status 7 error and I don't have a backup ROM to restore into. What do I do?
Click to expand...
Click to collapse
Have the same issues as yours. Let me know if u find something out. Search for 'sideload' though i think that's the way to go.

Martial_X said:
Have the same issues as yours. Let me know if u find something out. Search for 'sideload' though i think that's the way to go.
Click to expand...
Click to collapse
I asked my friend about this problem too, and he told me that I should try using an all-in-one toolkit and try to reflash TWRP and a different ROM. But if that doesn't work, then I'll try using the "sideload" feature.

I fixed my problem using this all-in-one toolkit: http://tinyurl.com/kjkmbog
I booted into CWM and I sideloaded a ROM on my computer then i activated sideloader on CWM and waited for the transfer to complete.

Related

[GUIDE] Easiest way to unroot HTC Legend

Hi..
I decided to make an "EASY TO USE" unroot guide for the HTC Legend..
Here goes..
First..
If you want to unroot to software version 1.31
... download this file and put it in the root of your SD-card..
- This version can easily be rooted again..
If you want to unroot to software version 2.03
... download this file and put it in the root of your SD-card..
- This version will need a downgrade in order to root phone again..
When the wanted file is on your SD-card turn OFF your phone..
EDIT: *** NB: Reported in that this might not work if SD-card is partitioned with ext-partition. If not working try to use a fat32-only ***
Turn the phone ON while holding VOLUME DOWN..
The phone will detect the LEGEIMG.zip file on the SD-card and
ask you to upgrade..
Select YES.. And wait...
This should do the trick....
Nice and simple. Good work m8.
Good guide. Straight to the point. Keep up the good work.
Is there any way to. Convert the rom. Zip with the ruu to legeimg. Zip
Sent from my Legend using XDA App
Yep... extract ROM.zip from RUU and rename it to LEGEIMG.zip.
Hello,
I'm not familiar yet with rooting.
When this procedure is done, will I have a working Legend device ?
Which rom will it be running ?
How could I "upload" CyanogenMod to this rooted legend ?
I've search the web, but I do not get everything yet...
Thank you for your hep !
Yannick
Thanks for the guide, but it doesn't work for me.
"No image or wrong name!" message appears.
I've tried your first link and my own rom.zip renamed to LEGEIMG.zip .
splitsch said:
Hello,
I'm not familiar yet with rooting.
When this procedure is done, will I have a working Legend device ?
Which rom will it be running ?
How could I "upload" CyanogenMod to this rooted legend ?
I've search the web, but I do not get everything yet...
Thank you for your hep !
Yannick
Click to expand...
Click to collapse
Read again.. This is to UNROOT..
Sent from my Legend using XDA App
Lol. I used this to unroot yesterday. Works 100%
ishan_rulz said:
Lol. I used this to unroot yesterday. Works 100%
Click to expand...
Click to collapse
What's the point to unroot, I'd rather flash a rooted but stock rom if I have to
Kwen said:
What's the point to unroot, I'd rather flash a rooted but stock rom if I have to
Click to expand...
Click to collapse
Something had gone wrong, wipe wasn't working and it kept rebooting so I was forced to... once CM 6.1 Stable releases, I'll root it again.
Kwen said:
What's the point to unroot, I'd rather flash a rooted but stock rom if I have to
Click to expand...
Click to collapse
The point is if you have to return it under warranty.
Can someone help me with this? I keep getting an error. I can't flash the LEGEIMG.zip by reboot & vol dn+power nor by clockwork. Tried downloading the file twice, tried my extracted rom.zip and it just doesn't work.
What else can I do?
Can you post md5 of this zip?
What I did was put the file in the root of the SD Card...
Switch off the Legend and switch it on while having the Volume down button pressed. It flashes automatically.
muchzilll4 said:
Can someone help me with this? I keep getting an error.
Click to expand...
Click to collapse
You honestly believe that there are psychics reading these forums?
What error? Does this error have a name? Does it have a description? Or does it just say:
ERROR
...over the entire screen?
Dammit guys, learn to post some useful information!!! If it ain't working, there's definitely a reason don't you think???
Nice work mate, i gott bored, so i tested your guide, worked like a charm
now it's, back to rooting the phone again
muchzilll4 said:
Thanks for the guide, but it doesn't work for me.
"No image or wrong name!" message appears.
I've tried your first link and my own rom.zip renamed to LEGEIMG.zip .
Click to expand...
Click to collapse
Sorry, I wrote about it on the previous page. This message was kind of stupid bump.
Love you too.
It says 'error' tho, before error messages, so you're right. In green tho.
Something like 'Wrong image!', 'Can't find image'. All about LEGEIMG.zip . It dissapears fast.
muchzilll4 said:
Sorry, I wrote about it on the previous page. This message was kind of stupid bump.
Love you too.
It says 'error' tho, before error messages, so you're right. In green tho.
Something like 'Wrong image!', 'Can't find image'. All about LEGEIMG.zip . It dissapears fast.
Click to expand...
Click to collapse
One of two problems..
1) You did not put the download in the ROOT of your sd- card or
2) you have renamed the file..
One of these things are causing the error..
Sent from my Legend using XDA App
I'm 100% sure I haven't renamed the file and it's in the root (astro file manager shows it in /mnt/sdcard). If ROOT means sdcard top folder then there it is.
edit: clockwork says "Can't open /sdcard/LEGEIMG.zip (bad)". Hence the request for md5 - but I doubt triple download would cause some inconsistency in file.
I got CID incorect error, what does it mean?

Nexus one with broken power button stuck in bootloop and no unlocked bootloader

Hello,
I think you are my last chance, I have this very specific problem with my Nexus One and can't find any thread on any forum that can help after hours of research:
It's rooted and I have CM7 but after a choc (I thing it's the cause) it reboots and now it's stuck in bootloop.
It happens to me once and i fixed it by flashing with fastboot.exe (i was very lucky this time) but it doesnt work anymore and i don't know why.
My power button is broken so I can't unlock bootloader, I have S-ON and I have read that it can be a problem to use fastboot to flash (I have an error message in the command prompt like this: FAILED: remote not allowed)
If i write "fastboot devices" my Nexus one is recognized so I don't understand why it doesnt work...
If you have any suggestions I take it with pleasure!
(sorry if my english is not perfect)
Thanks.
Gain s off.
Sent from my Energized Amaze 4G
Yes girls know about XDA
you can thank a girl on here
amandez said:
Gain s off.
Sent from my Energized Amaze 4G
Yes girls know about XDA
you can thank a girl on here
Click to expand...
Click to collapse
You go girl !!!!
Easy, just fast boot OEM unlock the device, although I don't know How you have been able to get cm7 and a custom recovery without a unlocked bootloader
Sent from my Nexus One using xda app-developers app
humzaahmed155 said:
Easy, just fast boot OEM unlock the device, although I don't know How you have been able to get cm7 and a custom recovery without a unlocked bootloader
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
bro you dont need to unlock bootloader to flash custom recovery or cm7. jus rooting is enough...
http://forum.xda-developers.com/wiki/Nexus_One/Guides_&_Tutorials#ADB.2FFastboot.2FBootloader
Sent from my Nexus One using Tapatalk
n1newbie said:
bro you dont need to unlock bootloader to flash custom recovery or cm7. jus rooting is enough...
http://forum.xda-developers.com/wiki/Nexus_One/Guides_&_Tutorials#ADB.2FFastboot.2FBootloader
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
Oooooohhhh right, I thought you needed a unlocked BL for a custom recovery
Sent from my Nexus One using xda app-developers app
I have the same problem, I also tried all the command for Fastboot and got me no where.
My problem started when I install Darktemor(If I spelled it right) A2SDGUI and press something for Dalvik and Cache, my phone reboots and got stuck at bootloop forever. I searched the entire net for tutorials, and I tried almost everything and still no luck.
I always have this error code at Fastboot:
"FAILED <remote: not allowed>"
PLEASE! Someone help me, I want to fix this on my own. 'Cause it'll cost me a lot if I have someone fix it for me. Please, i'm begging. Help me. Huhuhu
I have MIUI Rom Installed on my phone, i'm not sure with the version of it. Sorry!!
Please help me guys! Super thank you in advance.
Thank you all
I had the same problem. i followed the instructions as posted in the link
http://forum.xda-developers.com/wiki/Nexus_One/Guides_&_Tutorials#ADB.2FFastboot.2FBootloader
my device is working again .. thank you all
But my last question, is there a way to restore my data ? like the SMS and the call log? and can I update again to CM7?
THANKS AGAIN FOR EVERYONE
hanitoo said:
I had the same problem. i followed the instructions as posted in the link
http://forum.xda-developers.com/wiki/Nexus_One/Guides_&_Tutorials#ADB.2FFastboot.2FBootloader
my device is working again .. thank you all
But my last question, is there a way to restore my data ? like the SMS and the call log? and can I update again to CM7?
THANKS AGAIN FOR EVERYONE
Click to expand...
Click to collapse
I'm still interested, what method of the link do you use? PASSIMG method?
So i'm stuck in this step: 3.Transfer the provided PASSIMG.ZIP file to the root of your SD card.
How do you go to the root of the sd card if the phone is in bootloop?
Thanks!
Ktt06 said:
I'm still interested, what method of the link do you use? PASSIMG method?
So i'm stuck in this step: 3.Transfer the provided PASSIMG.ZIP file to the root of your SD card.
How do you go to the root of the sd card if the phone is in bootloop?
Thanks!
Click to expand...
Click to collapse
By putting the µSD in another (working) phone and connect it to the computer, or by using a µSD adapter which also must be connected to the computer.
It finaly works, after many month i can finaly use my Nexus One... Now it's my new Desire S that have a problem :laugh:
Thanks for helps, this thread is finaly resolved!
tommert38 said:
By putting the µSD in another (working) phone and connect it to the computer, or by using a µSD adapter which also must be connected to the computer.
Click to expand...
Click to collapse
I have copied the PASSIMG.zip to the SD card, but how can I mount it in bootloader when the power button is broken?

[Q] in desperate need of help: bricked my brand new HTC ONE

Hi!
Today I bought a brand new HTC One (not locked to any carrier) and I wanted to install ViperROM. I did probably something stupid, because I bricked the phone and I have no idea how to fix it (please note that this is my first Android, I was an iPhone user so far).
After following a guide how to root my device tried to install the latest viperROM and put it in the "download"-Folder on the device (I guess this was my mistake). When I tried to install the ROM in TWRP (version v2.6.0.1) the installation got stock with "Flashing Kernel". After waiting for 10 minutes or something I rebooted using "adb.exe" and tried it again (this time putting the ROM on an USB-stick and using an OTG-cable). This time the flashing ends up with:
Code:
Done!
Unable to mount '/cache'
Unable to mount '/system'
When I try to restart TWRP warns me that I have no OS installed. Normal booting gets stuck on the white HTC-screen.
I'm totally desperate. :crying:
Is there anything I can do to save my new device?
Greetings
MJFox
Your just soft bricked..there's so many threads on this I want to throw up
I know that I'm probably a pain in the ass, but I was not able to find a solution for my problem yet using the search
maybe you can point me to the right direction?
greetings
MJFox
MJFox78 said:
Hi!
Today I bought a brand new HTC One (not locked to any carrier) and I wanted to install ViperROM. I did probably something stupid, because I bricked the phone and I have no idea how to fix it (please note that this is my first Android, I was an iPhone user so far).
After following a guide how to root my device tried to install the latest viperROM and put it in the "download"-Folder on the device (I guess this was my mistake). When I tried to install the ROM in TWRP (version v2.6.0.1) the installation got stock with "Flashing Kernel". After waiting for 10 minutes or something I rebooted using "adb.exe" and tried it again (this time putting the ROM on an USB-stick and using an OTG-cable). This time the flashing ends up with:
Code:
Done!
Unable to mount '/cache'
Unable to mount '/system'
When I try to restart TWRP warns me that I have no OS installed. Normal booting gets stuck on the white HTC-screen.
I'm totally desperate. :crying:
Is there anything I can do to save my new device?
Greetings
MJFox
Click to expand...
Click to collapse
So you come charging in here using a new phone and OS (so basicaly fullly clueless) and start modifying stuff and now you`re surprised somethng went wrong.
Well, try installing a rom with adb sideload in TWRP.
gee2012 said:
So you come charging in here using a new phone and OS (so basicaly fullly clueless) and start modifying stuff and now you`re surprised somethng went wrong.
Well, try installing a rom with adb sideload in TWRP.
Click to expand...
Click to collapse
since I'm usually not an idiot with those things and I followed the guide I'm quite surprised that something went wrong
anyway, thank you for the sideload-hint, but it didn't help, the ROM got transfered to /data/media/sideload.zip and the flashing process starts after that but ends after several minutes with the same "Unable to mount"-error as before :crying:
in the mount-menu, which entries need to be checked before starting the flashing?
any further help would be greatly appreciated
greetings
MJFox
Can you go into bootloader if yes below might help
Have you tried downloading a ruu extract the bootloader flash the bootloader , put into fastbot and run the RUU
MJFox78 said:
since I'm usually not an idiot with those things and I followed the guide I'm quite surprised that something went wrong
anyway, thank you for the sideload-hint, but it didn't help, the ROM got transfered to /data/media/sideload.zip and the flashing process starts after that but ends after several minutes with the same "Unable to mount"-error as before :crying:
in the mount-menu, which entries need to be checked before starting the flashing?
any further help would be greatly appreciated
greetings
MJFox
Click to expand...
Click to collapse
Which guide were you following out of curiosity? And is your device detected in sideload mode while in twrp?
Sent from my HTC One using xda app-developers app
dami_cool said:
Can you go into bootloader if yes below might help
Click to expand...
Click to collapse
yes, I can go into the bootloader
dami_cool said:
Have you tried downloading a ruu extract the bootloader flash the bootloader , put into fastbot and run the RUU
Click to expand...
Click to collapse
I have absolutely no clue what that means, I will try to search the forums to find something that explains your suggestion
greetings
MJFox
dami_cool said:
Can you go into bootloader if yes below might help
Have you tried downloading a ruu extract the bootloader flash the bootloader , put into fastbot and run the RUU
Click to expand...
Click to collapse
He shouldn't have to ruu...that's last case scenario
---------- Post added at 09:18 PM ---------- Previous post was at 09:17 PM ----------
MJFox78 said:
I have absolutely no clue what that means, I will try to search the forums to find something that explains your suggestion
greetings
MJFox
Click to expand...
Click to collapse
Don't ruu
Ajxx16 said:
Which guide were you following out of curiosity? And is your device detected in sideload mode while in twrp?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
as a newbie I'm not allowed to post links, but it's an article with the title "Rooting The HTC One The Right Way" at cultofandroid.com
and yes, the device is deteced in sideload-mode, the rom gets transfered and the flashing starts, but it seems that no matter what, "system" can not be mounted after the flashing
greetings
MJFox
ok, I was able to restore the device with the stock firmware, woohooo!
I'm still not sure why flashing of viperROM went wrong the first time
any ideas? I would like to try it again, but since I have no idea what I did wrong the first time I don't want to mess up the system again
greetings
MJFox
THAT'S THE EASY WAY ONCE THE system boots you can start the whole process again but more carefully. Or you can flash the Rom.zip from the ruu
Sent from my HTC One using xda app-developers app
I tried to flash viperROM again
again I end up with:
Code:
Done!
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/system'
what's going on there?
greetings
MJFox
one abpote
Try again, make sure you have the correct device type ROM, there are several M7 devices around... may depend on your provider... I got mine yesterday, "m7ul" and succesfully flashed cyanogenmod 10.1, and even it´s still a nightly, I´m quite impressed...
Good Luck
lotte67890 said:
Try again, make sure you have the correct device type ROM, there are several M7 devices around... may depend on your provider... I got mine yesterday, "m7ul" and succesfully flashed cyanogenmod 10.1, and even it´s still a nightly, I´m quite impressed...
Good Luck
Click to expand...
Click to collapse
they don't seem to be various versions of the viperROM, all I could try is to install an older version
do you think this might help?
I found just one person that had the same problem in the viperROM-thread, but I couldn't find any solution for that
greetings
MJFox
MJFox78 said:
they don't seem to be various versions of the viperROM, all I could try is to install an older version
do you think this might help?
I found just one person that had the same problem in the viperROM-thread, but I couldn't find any solution for that
greetings
MJFox
Click to expand...
Click to collapse
And you have a Sprint HTC One? Cause that´s the only one the Viper ROM is build till now...
lotte67890 said:
And you have a Sprint HTC One? Cause that´s the only one the Viper ROM is build till now...
Click to expand...
Click to collapse
no, I don't have a Sprint HTC One, I have an open EU HTC One!
damn it, I didn't notice that it's just for sprint, stupid me!
that probably explains all my problems
thanks for the clarification!
is there any other ROM that is compareable to the viperROM? I would like to keep HTC Sense, but want to customize several things
greetings
MJFox
:good: Glad to help... I have no idea if there are other ROM´s with SENSE around... I use cyanogenmod 10.1, AOSP, very fast and nice to customize...
Regards

Some one please help!!!!

i ahve tried to install a custom rom but it didnt flash properly, and i tried to do a restore of my stock rom but its not on my phone anymore all i can do is put the phone into bootloader and recovery, i have my stock rom backed up on my pc, but i cant find a way of getting my pc to recognise the phone to enable me to get the stock rom installed, my 400pound htc one might as well be a paperweight at this rate!!
surly there is a way i can get acess to the internal sd card??
Search for: adb sideload
BenPope said:
Search for: adb sideload
Click to expand...
Click to collapse
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
nottys4 said:
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
Click to expand...
Click to collapse
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
BenPope said:
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
Click to expand...
Click to collapse
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
Click to expand...
Click to collapse
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
BenPope said:
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
Click to expand...
Click to collapse
i have twrp 2.6.3.3
http://forum.xda-developers.com/showthread.php?t=2559200
thats the tutorial
it wont load any rom says it cant read the rom
Post your commands which you used to copy files
sent from my mobile device
SaHiLzZ said:
Post your commands which you used to copy files
sent from my mobile device
Click to expand...
Click to collapse
all the commands that i sent are in the tutoruial that i shared
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
bored_stupid said:
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
nottys4 said:
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
Click to expand...
Click to collapse
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
mb_guy said:
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
Click to expand...
Click to collapse
are you able to have a chat with me on skype please and explain this in more detail, i've done so much in the past few days i dont even know where i am anymore
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
Click to expand...
Click to collapse
Try to be more precise! Which rom are your trying to flash? Give a link!
nottys4 said:
all the commands that i sent are in the tutoruial that i shared
Click to expand...
Click to collapse
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
nottys4 said:
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
Click to expand...
Click to collapse
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
alray said:
Try to be more precise! Which rom are your trying to flash? Give a link!
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
Click to expand...
Click to collapse
many thanks guys for your help i managed to get my phone back online again!! but i now have another problem...
hi there after completely messing my phone up i managed to get this rom back on and working!! but my phone gives this error message:
There was a problem communicating with google servers.
try again later.
does anyone know why this is??
anybody else having issues with thier google account??
nottys4 said:
anybody else having issues with thier google account??
Click to expand...
Click to collapse
It is problem globally! Google is experiencing major error with sync servers.
or try this: go to accounts.google.com and in security (left panel) go to the list of 3rd party applications that are using your Google credentials and start revoking the applications that you no longer use.
Softor4pda said:
It is problem globally! Google is experiencing major error with sync servers.
Click to expand...
Click to collapse
bugger!!! i really wanna get my phone set up too, any ideas of how long they will be down?

my one plus 3t is bricked unbricked using msmtool but now i cant install or update

my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.
should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs
For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.

Categories

Resources