Database Develop

Protective Cases with small Form

What would be the best armor/protective case for the G2 with a small size?
Not as big as an Otterbox Defender, nothing bulky...
But not as thing as a thin TPU case...
Looking at the SPIGEN Slim Armor right now, seems appealing but also kind of thin.

I love my slimArmor, It is a bit thin on the face side but that's where I have the iLoome Flex glass protector on. Hopefully in a drop the iLoome cracks and my screen stays in one piece.

If you want less than the defender then try the otterbox commuter. I have it for mine and I don't regret it at all, very reasonable thickness with a nice lip on the front for a case this protective, plus none of the button problems that seem to plague the defender series
Sent from my G2

sp33dsk8 said:
I love my slimArmor, It is a bit thin on the face side but that's where I have the iLoome Flex glass protector on. Hopefully in a drop the iLoome cracks and my screen stays in one piece.
Click to expand...
Click to collapse
I'm really into having front face protection.

Has anyone had the Incipio Dual Pro case?
It seems appealing.

mikenike500 said:
Has anyone had the Incipio Dual Pro case?
It seems appealing.
Click to expand...
Click to collapse
I will be in a couple of weeks.

mikenike500 said:
Has anyone had the Incipio Dual Pro case?
It seems appealing.
Click to expand...
Click to collapse
It's a very thin case, with almost zero rim. Thinner than the Slim Armor, if the photos of the latter are correct. Like 1mm of rim, which is barely that tall. The only cases with less rim that I've seen are the official QuickWindow case and maybe the Feather.

mikenike500 said:
Has anyone had the Incipio Dual Pro case?
It seems appealing.
Click to expand...
Click to collapse
I bought it for my wife's Verizon G2, the pink one. It is a very good case, a good mix of protection and being slim. The plastic back has a matte finish a has a slight grip to it.So nice in fact, I just bought the white one for my newly purchased G2. :good:

My Verizon LG G2 came with a white/grey Incipio DualPro case. My initial feeling toward it is that the silicone is too flexible and pulls too easily away from the top and bottom front faces of the phone. While putting the outer shell on the phone, it felt like the case just wouldn't be stiff enough, but now that it's on the shell isn't so bad. The case has decent grip, but the white color of the outer shell picks up color from your pocket (or whatever else it rubs up against for a bit). I really like how the rear buttons are covered up, yet actually easier to use because of the more pronounced power button bulge.
On my previous phone (a Verizon Samsung Galaxy SIII) I regularly used a pebble blue TPU case from Belkin, but also had a blue Otterbox Commuter for when I'd go camping and hiking. I quite liked the Commuter and will compare the Incipio DualPro against it.
I've been using a Diztronic matte black TPU case for the last week (my first full week with the device). Now I've switched over to the Incipio to check it out. I'll give it as long as I can stand it and will post back here.

Anyone checkout or have experience with the trident cyclops case for the g2? I used it on my moto x, for the protection it offered, really didn't have much bulk, was thinner then the commuter. Found a good deal on a g2 cyclops thinking on checking it out.
Sent from my g2 using Tapatalk

Just ordered a poetic invictus. For under $10.00, it seemed like a high quality case.
##amazon.com/gp/product/B00F7WWLYO/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1[/url]
can't post links yet, so remove the two pound signs at the beginning and replace with the http, colon and forward slashes.

24 Hour update: I've spent 24 hours with the Incipio DualPro case on my Verizon LG G2. It is definitely growing on me. While the slightly rubberized hard shell feels slightly slippery to the touch, it is grippy on most surfaces when set down. The case seems to offer protection on par with an Otterbox while feeling better. There's very little added bulk with this case, considering what it's offering in terms of protection.
The case looks good from the back, but I'm not too keen on the white shell peeking around the front edges of the phone (or with how it picks up colors from rubbing on its surroundings). The grey inner shell looks good enough that it's not distracting. Had I purchased the case separately, I would definitely have gone with the black case. But I don't feel strongly enough to buy the black version as a replacement for the white/grey case I already have.
I'm happy with this case and would recommend it.

thebes11 said:
Just ordered a poetic invictus. For under $10.00, it seemed like a high quality case.
##amazon.com/gp/product/B00F7WWLYO/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1[/url]
can't post links yet, so remove the two pound signs at the beginning and replace with the http, colon and forward slashes.
Click to expand...
Click to collapse
Received my black Invictus today and it's going back. I'm not impressed. The biggest thing is the cutout at the top left corner the pics on Amazon don't show it but it's there and annoying. The plastic is glossy and looks to scratch easily. The kickstand is just a flap cut out of the back of the case and doesn't snap into place very well. I was expecting a somewhat more premium case. Obviously not high end but better than this.
Sent from my LG-LS980 using Tapatalk

Today I tried switching back to my Diztronic case because I'm tired of the white/Grey color scheme of the Incipio case. I couldn't do it. I've grown used to the way the Incipio case covers the rear buttons and actually makes them easier to use.
But it turns out that I really do feel strongly enough about the color to have ordered a black version of the Incipio. It should get here in a couple of days. Hopefully it feels the same as this white one.
Sent from my Verizon LG G2 using Tapatalk

I really like my incipio dualpro. it's really thin but it's survived a couple drops already. my only complaint is the back is kind of slippery and I could see it slipping out of my hand (hasn't happened yet)

Having used the Slimarmor and the Diztronic TPU, I just recently moved over to the Tech 21 D3O case from Tmobile and I'm loving it.
With the slimarmor I felt it being a bit bulky as well as pretty slick at times. With the diztronic, I didnt feel as if there was enough protection if I were to ever drop the phone.
Looking at the videos of drop tests online for the d3o material, I was sold. The fit is snug, the only bulk added is on the edges where the d3o material is. The textured tpu is nice to hold and doesn't feel slippery, plus I feel much more confident in the event if it were to ever drop on the corners/edges of the phone. For the front face drops, hopefully the Glass M protector I have will take the impact.
Very satisfied with the Tech 21 case and would recommend to anyone looking for slim and protective. They have them in the Tmobile stores so you can definitely try it out first before you buy!

I have the Seidio Surface case and holster. I really like the holster but the case doesn't seem like it gives much protection. Anyone familiar with a case that will give more protection but still fit the holster.? I've tried a couple from Ebay that look slim but protective in the pictures but tend to be pretty bulky in hand. A kickstand would be nice but that's not a deal breaker.

Ballistic SG Shell Gel Protective Case
I used to have a Razr i before my LG G2.
The Razr i was tough by its own and still I had a "trident aegis" case for it, I could throw it meters and was always nice.
G2 seems way more fragile, but the trident series for the G2 are really creepy awful. So with a little research I came across this nice piece of plastic protection the "Ballistic SG Shell Gel Protective Case", checked some youtube videos of drop tests and reviews.
I bought it on ebay today, so now I'm waiting to arrive.
Hopefully its as nice as it looks.

[Q] Best relation between weight and protection

Hello, I buy a G2 and I have been reading a lot of opinions here on XDA but I can't decide at all.
I want something protective, and also lightly
I saw Nillkin frosted shield here
But I think it is not very protective, or I am wrong?
I also see Spigen Slim Armor here, it seems to be protective but is heavy, is't it? How much does it weight?
Or maybe a tempered glass + Nillkin frosted shield?
Is there anything between nillkin and Spigen?? (I don't like silicone case)
Is Diztronic Matte + an screen protector the best for me?
As you see I read, but there are a lot of opinions in a lot of pages and it is difficult to make up my mind.
Thanks for helping and sorry for my english, I am from Argentina
Daniel

I got this Speck case
http://www.amazon.com/dp/B00IEYHJU8/ref=cm_sw_r_udp_awd_7PzJub1VZ7N4Q
It looks like a two piece thing but is actually a fused one-piece case and quite slim. I have a used G2 in white and it has all sorts of dings and scratches on the phone, this case covers them all up perfectly. It looks and feels amazing. This color is a bit "pretty" but my four year old daughter loves it, so that works for me. I imagine if you have the black phone the black case would look better.
I also ordered a leather case from Tetded but that ships from hong Kong so it will be a while before I can evaluate.

dwielunski said:
I got this Speck case
http://www.amazon.com/dp/B00IEYHJU8/ref=cm_sw_r_udp_awd_7PzJub1VZ7N4Q
It looks like a two piece thing but is actually a fused one-piece case and quite slim. I have a used G2 in white and it has all sorts of dings and scratches on the phone, this case covers them all up perfectly. It looks and feels amazing. This color is a bit "pretty" but my four year old daughter loves it, so that works for me. I imagine if you have the black phone the black case would look better.
I also ordered a leather case from Tetded but that ships from hong Kong so it will be a while before I can evaluate.
Click to expand...
Click to collapse
How does the speck case protect against bumps and drops? As good as the spigen?

I'm using a Diztronic case and this tempered screen protector: http://www.amazon.com/gp/product/B00KVIGG54/
They work well together and I have no complaints about the protection. I'm pretty hard on my electronics and have dropped it to concrete quite a few times with no damage. I was even able to transfer the screen protector to a new phone when I had to get a warranty replacement for a defective camera sensor.
I used to have a two piece otter box style case because I was very paranoid about damaging the phone when I first got it. I got sick of struggling to get in in and out of my pocket since the phone is so big.

Cruzerlite Bugdroid!
http://www.amazon.com/dp/B00FEITFTA/ref=twister_B00FEITAUE?_encoding=UTF8&psc=1

i doubt this case would protect your phone from a waste high drop

Thin case

Hi.
I'm looking for ultra thin case for LG G2. Can any reg. any good?

Also interested in this, I'm checking out the ones on ebay from China that reviewers have said is very thin (<1mm). But was hoping to find the thinnest possible case without having to resort to a skin.

The ultra thin ones from china are only good for scratch protection, but don't help at all (as I found to my cost) if the phone is dropped. I also found they're not very grippy, making it more likely that you will drop it.

Depending on your carrier, but the Vzw model Incipio DualPro is minimum bulk, buttons on the back are covered, and provides a good grip. The non Vzw one doesn't cover the buttons, unsure about the thickness comparison.

Not sure what super thin is, but I use the Tudia Melody and am a fan of it.

I've used the Incipio Feather. That is the thinnest case you can buy. It is also super awesome matte rubber like touch feel and high quality plastic. I just purchased a new one after original 2013 case was sort of a dingy blue.
http://www.amazon.com/Incipio-Feather-Case-Verizon-Packaging/dp/B00F4AYBPG
I just picked up the teal/light blue one the other day for $5 shipped. It is a little pricier now but normally run $24ish.
For as thin and skimpy as they are, my G2 looks flawless for having been dropped many times on concrete and hardwood. My case corners had a few scratches but the phone itself is protected. The case provides a small lip to protect the screen and grabs the corners to catch drops.
It is the only case I will buy.

Yesoo slim from amazon. Its the thinnest and has a great matte finish liket he nexus 5. Better than the super slick G2 back.
Sent from my LG-D800 using Tapatalk 2

I've got two of these cases and have ordered two more: http://www.ebay.com/itm/HOT-Ultra-T...Cell_Phone_PDA_Cases&var=&hash=item20f131738a
Second two haven't arrived yet and I ordered two weeks ago but a long delivery time from China is to be expected. For ~69p delivered you can't go wrong!
Very thin, almost don't feel it other than it being a more pleasant matte texture. Not very hard wearing, mines got scratches on after about a month, but I intended for it to be sacrificial anyway as they are so cheap.

http://www.amazon.com/MPERO-SNAPZ-R...=1423222408&sr=1-4&keywords=mpero+lg+g2+snapz
This case is wonderfull. I ordered it, but can't use it because i use tempered glass protectors that case would work only with a smaller one glass or with plastic screen protectors. But it has the nexus feel and is extra slim. Try it guys, very cheap and very good quality

I personally do not like TPU cases. They are too thick and add a huge lip around the screen which makes it hard to get to the edge (especially on the LG G2's screen).
And all TPU cases feel the same to me. The Incipio Feather is a hard shell and snaps to the back. It is pretty difficult to remove, even after owning my last one for a year and a half.

I have one of these an its very unobtrusive, and more grippy than the bare phone - it clips on very securely and protects the corners which is all I want.
http://www.amazon.co.uk/gp/product/B00FRFT3PG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
BUT I suspect if you drop the phone the case won't last long - I've not dropped mine (fingers crossed a drop now isn't on the cards!) but my wife has one for her Moto G and it broke a piece off the corner when dropped on the corner - the phone was fine, but the case was junk, but at £2 for another it's not the end of the world and certainly stopped the phone getting damaged.

russtyd said:
I have one of these an its very unobtrusive, and more grippy than the bare phone - it clips on very securely and protects the corners which is all I want.
http://www.amazon.co.uk/gp/product/B00FRFT3PG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
BUT I suspect if you drop the phone the case won't last long - I've not dropped mine (fingers crossed a drop now isn't on the cards!) but my wife has one for her Moto G and it broke a piece off the corner when dropped on the corner - the phone was fine, but the case was junk, but at £2 for another it's not the end of the world and certainly stopped the phone getting damaged.
Click to expand...
Click to collapse
That probably won't work with the Verizon VS980 because our device is a little thicker then the other models due to Qi Charging. It is also basically the same thing as the Incipio Feather I posted, except the Incipio is specifically designed for the Verizon models thickness and different button size.
I've dropped my phone tons of times and the Incipio holds up nicely.

player911 said:
I've used the Incipio Feather. That is the thinnest case you can buy. It is also super awesome matte rubber like touch feel and high quality plastic. I just purchased a new one after original 2013 case was sort of a dingy blue.
http://www.amazon.com/Incipio-Feather-Case-Verizon-Packaging/dp/B00F4AYBPG
I just picked up the teal/light blue one the other day for $5 shipped. It is a little pricier now but normally run $24ish.
For as thin and skimpy as they are, my G2 looks flawless for having been dropped many times on concrete and hardwood. My case corners had a few scratches but the phone itself is protected. The case provides a small lip to protect the screen and grabs the corners to catch drops.
It is the only case I will buy.
Click to expand...
Click to collapse
I've had 2 of these, and they are great. Very thin, and stylish... and grippy. I had to replace one because I dropped it right on the corner on concrete from about 4 feet up, and the corner of the case broke off, but the phone was only slightly damaged. Great case!

Thin Case - Incipio Feather
kongo101 said:
I've had 2 of these, and they are great. Very thin, and stylish... and grippy. I had to replace one because I dropped it right on the corner on concrete from about 4 feet up, and the corner of the case broke off, but the phone was only slightly damaged. Great case!
Click to expand...
Click to collapse
I have to agree, while no OtterBox, the Incipio feather has protected my phone well. Bought one off eBay for $10 and see the ones sold on Amazon have dropped in price as well.

What's the lightest but still good case for LG G4

I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?

rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
lol, I just posted about a sale on this one, it was 30 but a new seller has it for 25 including shipping.
It is about 9 grams according to the seller page, but it is bareback. I got the leather though, so that is what I was looking for. Also it looks like it is an officially licensed lg case so it should fit the curve perfect.
Once I get mine in I will do a review. I hope this helps:highfive:

Thanks. I'm looking forward to your review.

What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a *screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.

For this situation,a tpu case would a good choice.

I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection

jbdan said:
I've got the diztronic. While nice and adds good protection I think it's too thick and heavy. Really takes away from the elegance of the G4. I've ordered the Nilkin Nature and heard it is very light and thin. Not much if any drop protection, but added grip and scratch protection
Click to expand...
Click to collapse
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.

rgs2 said:
I have the I-Blason Clear Halo case on the phone. It looks nice and fits fairly well except for the bottom where it's not as high as the top and the sides. Goes on and off easily, even over the leather back. But it weighs 26 grams. That's a lot of extra weight for this phone. The Diztronic TPU case is 18 grams and they usually make nice cases. Would love to go bareback but I'm not quite that brave. Anyone found anything lighter that still provides some protection?
Click to expand...
Click to collapse
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .

inpherknow said:
I have the same case as you. I don't mind the weight too much, but I agree that it does add more than i expected. My phone looks like one of those leather couches with the plastic covering it .
Click to expand...
Click to collapse
Good comparison! Now I can't look at it without thinking about those plastic covered couches.

benmarc said:
What my knowledge and experience say is that the "revolution" case is super rugged, protective and durable it has a screen protector and is impact shock and water resistant, ( will fit leather backing) its also light in weight and very much secured.
Click to expand...
Click to collapse
Don't care for the looks but I like the rest of what you said. I'll check it out.

0rigin said:
Diztronic is one of my favourites. Been using it on my Nexus 5 for more than a year, dropped it numerous times and nothing ever happened. For the G4 however, I ordered Ringke Slim, which provides only basic protection, as I wanted something slimmer. Haven't received it yet, but if I'm not satisfied with it, I'm gonna go with Diztronic again.
Click to expand...
Click to collapse
Interesting. Looking forward to your comments on the Ringke.

james491225 said:
For this situation,a tpu case would a good choice.
Click to expand...
Click to collapse
Maybe so. Can you recommend a good one?

I picked up a basic Insignia™ brand case at Best Boy. Good edge coverage, snug fit and all cases should have something very close to what has been incorporated into this design -
actual textured grip enhancement on the side-edges. I've been *****in about this for years and here it finally is . . . on a low cost case.

The Spigen Exact Fit is my fave. Super thin, protects all sides. Cheap too but quality. It is a hard shell case. I dislike the TPU cases on anything other than tablets.
I had Ringke before but its coated plastic. Eventually the color starts to wear off. I had a metallic gray and it was black underneath.
The spigen is a solid color throughout.
The only thing I dislike is it is slick. I had a Incipio Feather on my G2 and it had a rubber type coating that I prefer. But Incipio isnt making a Feather case so the Spigen Exact Fit is thr best choice IMO.

I've got the Ringke Slim case. If you're looking for a very slim, not in the way case, this is a very good choice. Very tight fit with a slight lip so the screen doesn't touch whatever you put it on when placed face down. I love it since it barely adds any size or weight while still offering some protection. Only downside is it's very, very difficult to take off since it's a tight fit. If you're planning on swapping out batteries often or changing backs, this case may not be the best option.

Easy Removal and Lightweight??
This Ringke looks to be lightweight, and easy to remove. I need both of these abilities with my G4, because I replace the battery at least once a day. Does anyone know of any other cases that are both lightweight and easy to remove (I have the tan leather backed version from T-Mobile)??

The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app

I have verus verge, and though it fits perfect with all cuts and it is rugged and good finish. It does add a heft to device.

jaggrey said:
The UAG is surprisingly lightweight considering the protection it provides. I love it.
Sent from my LG-H811 using XDA Free mobile app
Click to expand...
Click to collapse
Looks very interesting but I wish they would tell us the weight.

Ringke Slim and Spigen Exact Fit are the same style hard cases.
I chose the Spigen because I didn't like the lines in the corner of the Ringke Slim, or the speaker cut out.
The Spigen, IMO, looks better. It also comes in Teal.

Thinnest case

What is the thinnest case out? I don't necessarily like cases...just want something as thin as possible for scratch protection.

Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.

If you just want scratch protection then a skin is the way to go.
Sent from my Nexus 5X using Tapatalk

sn0warmy said:
Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.
Click to expand...
Click to collapse
I have this one and have had it on past phones and I felt it made the 5x quite a bit bigger for a "thin" case. Maybe because its designed to fit flush with the camera and since the camera protrudes out, it the case does too.

EeZeEpEe said:
If you just want scratch protection then a skin is the way to go.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I have a dbrand on the way.

There is a thread here about the LG hardshell. I think it's about as thin as it can get, similar to the sand paper like hard cases

jbdan said:
There is a thread here about the LG hardshell. I think it's about as thin as it can get, similar to the sand paper like hard cases
Click to expand...
Click to collapse
fitchpuckman said:
I've heard a lot about this one... Also the Nillkin Nature case keeps coming up, too, and lists itself as .66mm thick. That's a pretty slim case, and would be far thinner than my Cimo tpu case. I'm probably going to order both the Nillkin and Lg Hardshell and see which one is best. I like that the Nillkin comes in clear and smoked options, too, instead of just solid colors. Haven't been able to confirm that option on the LG case since it doesn't appear for sale in the US just yet.
Click to expand...
Click to collapse
Based on this guy's caliper and Amazon.com, the Nillkin should be quite a bit thinner than the LG case...
http://forum.xda-developers.com/nex...ll-snap-thinnest-hard-case-lip-t3268751/page2

Nillkin nature tpu case. Also has the best feeling buttons I ever had with a silicone case. Ports on bottom have protection . also nice

sn0warmy said:
Rinkge Slim is probably the thinnest. It fits VERY well and is about as minimal as it gets. I really like it.
However, I switched to a TPU case because I can be a bit clumsy and needed more protection from drops on pavement.
Click to expand...
Click to collapse
IMO the Ringke and Spigen "slim" cases look like Otterboxes in comparison to the LG Snap On, that one is basically like a hard skin. The quicksand cases are similar to those in thickness.
fitchpuckman said:
Based on this guy's caliper and Amazon.com, the Nillkin should be quite a bit thinner than the LG case...
http://forum.xda-developers.com/nex...ll-snap-thinnest-hard-case-lip-t3268751/page2
Click to expand...
Click to collapse
How thin is the Nilkin? I don't see it advertised. The LG Snap On is advertised at 0.75mm but we don't know at which point of the case they measured.
The Nilkin is a gel case, or "condom" case as I like to call them. They are thin but that's about all they have going for them.

bblzd said:
IMO the Ringke and Spigen "slim" cases look like Otterboxes in comparison to the LG Snap On, that one is basically like a hard skin. The quicksand cases are similar to those in thickness.
How thin is the Nilkin? I don't see it advertised. The LG Snap On is advertised at 0.75mm but we don't know at which point of the case they measured.
The Nilkin is a gel case, or "condom" case as I like to call them. They are thin but that's about all they have going for them.
Click to expand...
Click to collapse
The nillkin is advertised at. 0.6mm. Not much for rugged protection, I suppose, but should be nice for some coverage without added bulk. Mine just shipped (from somewhere in east Asia) and should be here in about 2 weeks. Will keep y'all posted.

The Lg case has a s light inward curve to it so it's hard to get measurements. After trying multiple angles the thinnest I got was .80, that's coming straight up from the bottom.

Diztronic hands down

fitchpuckman said:
The nillkin is advertised at. 0.6mm. Not much for rugged protection, I suppose, but should be nice for some coverage without added bulk. Mine just shipped (from somewhere in east Asia) and should be here in about 2 weeks. Will keep y'all posted.
Click to expand...
Click to collapse
Just got the Nillkin. Definitely the thinnest TPU case I've ever owned. Also the buttons still retain most of their clicky feedback. This has happily replaced the Orzly as my main case.

fascinate said:
Just got the Nillkin. Definitely the thinnest TPU case I've ever owned. Also the buttons still retain most of their clicky feedback. This has happily replaced the Orzly as my main case.
Click to expand...
Click to collapse
This is awesome to hear. I'm pumped...the next 10+ days of waiting for mine to arrive from China are going to be tough! Mind if I ask, from where did you order yours?

fitchpuckman said:
This is awesome to hear. I'm pumped...the next 10+ days of waiting for mine to arrive from China are going to be tough! Mind if I ask, from where did you order yours?
Click to expand...
Click to collapse
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672

I have a PLESON before and it works well,is there anyone who also have bought from pleson?

fascinate said:
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672
Click to expand...
Click to collapse
I've got my Nillkin Nture TPU case. It's awesome! I don't have pics yet, but will try getting some for y'all when possible. In short, it's amazingly thin for TPU, adding minimal bulk. This is far superior and much thinner than my Cimo TPU case. It's not going to offer much drop protection, but I'm not too concerned about that. Plus it'll certainly prevent scratches. It also has a slight raised edge at the bezel so you can set the phone screen-down on a flat surface and the screen won't touch, but the added bonus here is that since its such a thin case, the offset is minimal which makes it MUCH easier to swipe left-to-right (for example to open an app menu or Google Now) than thicker TPU caes (which can often make it hard to touch the edge of the screen.
Anyway, I'm really happy about this case. It does had small flaps that cover and plug the charging alot and headphone jack, which I waver between liking and disliking. However, those could easily be cut off if wanted. Anyway, easily the best $10 I've ever spent on a case.

fascinate said:
Bought it from the below listing. Ordered on Dec. 19 and received it on Dec. 29 (Shipped to US). Let us know how you like the case when it arrives!
http://www.ebay.com/itm/252207673672
Click to expand...
Click to collapse
Hey I see the listing color options are white, gray, or gold. What color did you get? I'm wondering if by "white" do they actually mean clear?

SeriesOfTubes said:
Hey I see the listing color options are white, gray, or gold. What color did you get? I'm wondering if by "white" do they actually mean clear?
Click to expand...
Click to collapse
Yup, the white is actually clear. That's the one I bought.

My Nillkin is on its way from China. I'm excited to get it. I'm using the Ringke Fusion right now and I think the profile is slim along the edges but the extra thickness is killing me.
With the Nillkin should I look into getting a screen protector for the camera lens or does the case lip around the camera keep it from touching the surface?