Related
This is a CM11.0 (KitKat, Android 4.4) ROM for Razr HD.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
Click to expand...
Click to collapse
This rom requires an unlocked bootloader. Recent versions (July/2014) requires an updated (KitKat) bootloader
DEVELOPERS (razrqcom-dev-team):
EPinter - Kernel Development, Build Setup, XT925 & MB886 Support
DHacker - Kernel Development, Build Setup, XT926 Support
Hashcode - Kernel Development, Build Setup, XT926 Support
Nadlabak - Kernel Development, Build Setup, XT897 Support
Skrilax_CZ - Kernel Development, Build Setup, XT897 Support
Download links and information about what is working can be found on the website:
https://sites.google.com/site/linuxmobileorg/razrhd/cm11
Instructions:
Download the zip (cm-11-*-UNOFFICIAL-epinter-xt*.zip) and copy to your sdcard.
Boot into recovery.
Backup your firmware and data!
Format /system.
Install the firmware (install zip from...).
Install gapps (install zip from...).
Wipe data/cache
Reboot.
Developers builds:
Epinter: http://goo.im/devs/epinter
DHacker: http://androidhosting.org/Devs/Dhacker29/
An updated CMW recovery version is required, download:
http://www.clockworkmod.com/rommanager/
Gapps:
http://wiki.cyanogenmod.org/w/Google_Apps
2014-08-02
Everyone with JellyBean firmware/bootloader should use moto_msm8960_jbbl builds. Users who updated to KitKat firmware/bootloader need to use the moto_msm8960 builds.
2014-07-07
The ROM is being updated to kernel version 3.4, that was already released to RazrM and for XT926. The kernel 3.4 depends on new bootloader version and XT925 doesn't have it yet (a leak exists, you can search xda).
As Nadlabak and dhacker29 already informed, the M8 will be the last release supporting devices with JB bootloader. All nightly builds will support only new bootloader.
Click to expand...
Click to collapse
Sources:
https://github.com/razrqcom-dev-team
https://github.com/CyanogenMod
epinter said:
Be prepared for a lot of bugs, preview build of CM-11.0 for RazrHD XT925:
http://d-h.st/Yby
Soon you will have CM builds for XT926 too.
Click to expand...
Click to collapse
Anxiously waiting the XT926 build
What is the bug list?
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
What is the bug list?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
This will not be known until people start flashing it and reporting bugs.
epinter said:
Be prepared for a lot of bugs, preview build of CM-11.0 for RazrHD XT925:
http://d-h.st/Yby
CMW recovery version 6.0.4.4 is REQUIRED, or the latest TWRP.
http://www.clockworkmod.com/rommanager/
Soon you will have CM builds for XT926 too.
Click to expand...
Click to collapse
I'll be glad to try this out!... as soon as my nice brick turns back into a phone again!
Thanks you Epinter! Flashing right now and I´ll come back to report bugs..
sorry my english
Gonna try flashing this on AHD. hopefully it works
EDIT: Rejected.
Thanks a lot, Epinter!
Nice to see you around the scene again!
I'll try it tomorrow
wrsmega said:
Gonna try flashing this on AHD. hopefully it works
EDIT: Rejected.
Click to expand...
Click to collapse
I'm gonna give it a shot too.
Edit: it's a no go
Sent from my Atrix HD running Android 4.4
OK. So far so good. Flashed with no issue, neither the rom nor the gapps.
Very smooth. WIFI and radio signals look OK. Downloading all my apps...
After 5mn of testing (!):
- My external SD isn't detected.
- Same transition bug as in a few builds earlier on cm10.2
EDIT:
- All Interface/Menus/Status bar settings are missing
- Some settings are missing from the Camera app (jpeg quality and others)
EDIT2: 20 minutes
No other bug so far. Tested a few apps, are working as expected.
root is OK.
And s**t, that thing is REALLY snappy!.
Hi,
I made a dirty flash.
XT925 (Telcel Mexico)
I was in Carbon nightlies (7.11.13)
Flash ROM over Carbon (CWM 6.0.4.4)
Flash GAPP 4.4
Erase Cache, Erase Dalvik
Boot
Boot without Problems alle Apps working
(Around 70 apps, from whatsapp bbm, rootexplorer, udn lite, asphalt 8,etc)
SD Card not mounted/working
Radio signal works ,WiFi, battery is ok )
GPS locks quickly.
From Carbon have the unlock function with volume keys, that works too. I did not find it in CM, but works.
I flashed superuser.
Till now all is working great. No FC.
Sent from my XT925 using xda app-developers app
Hi guys,
Just flashed here and I´m still testing... Used CWM 6.0.4.4 without any glitches. Flashed Core GAPPS , the minimal one (17mb) with only core code. I also flashed SuperSU 1.6.5 as I don´t like Superuser.
It´s working like a charm!
I didn´t like the launcher, so I exchanged to Nova Laucher as I always used it.
Anomalies found:
- External SDCard doesn´t work.
- Tiles for Radios/GPS/Bluetooth on notification screen doesn´t work to switch the function on-off. It just leads to config screen.
- Sound poping/cracking playing FLAC files. Tried Apollo and PlayerPro. I don´t have any MP3 local to test, will try later. But working flawless with streaming sound. I used 8Track and Cloudaround and the sound is perfect.
Oh, just FYI Viper4Android is working flawlessly without any issue!
For a "first build", it´s almost perfect, just few bugs. Epinter, congratulations!
I´ll test GPS and Bluetooth Audio on car as soon as I´m out for lunch.
Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.
Sent from my XT925 using xda app-developers app
No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok
It's ok for a preview.
EcHoFiiVe said:
Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
I didn't try video playback yet, I'll check it!
For me too, can be a daily driver as it is now!
---------- Post added at 05:23 PM ---------- Previous post was at 05:20 PM ----------
CesarRamina said:
No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok
It's ok for a preview.
Click to expand...
Click to collapse
Mate, GPS is wonderful here! Locking less than 5 seconds. Even inside my apartment when usually is lazy to lock sinal!
I also tested bluetooth audio and is working fine.
I'll test tethering.
flight666 said:
I also tested bluetooth audio and is working fine.
I'll test tethering.
Click to expand...
Click to collapse
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
CesarRamina said:
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
Click to expand...
Click to collapse
Aren't they supposed to be white on KitKat?
CesarRamina said:
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
Click to expand...
Click to collapse
Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.
I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.
Tethering is down. Might not been implemented yet.
I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.
And lock screen rotation too, may not be present yet.
Any other feature is awesome.
flight666 said:
Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.
I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.
Tethering is down. Might not been implemented yet.
I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.
And lock screen rotation too, may not be present yet.
Any other feature is awesome.
Click to expand...
Click to collapse
Tks.
I know there is some bugs, and CM 11 almost is ok.
But something very wrong happened. I lost wifi. Not turn on. No connection anymore. I put sotck system by rsdlite, but even that, wifi not turn back. WIFI-AP not turn on too. I think it burned. Is there some way to test if really burned?
Tks again.
dhacker29 solved the SD-card issue for AOSP
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen
Summarized Standard Disclaimer: use at your own risk. I use it at mine
*Full wipe recommended if coming from another rom or Omni 5.0.2*
My personal Omni Rom 5.1 is based on omnirom with the following additions from CM11/12:
CM12 File Manager
CM11 Calculator (uglier but much more functional)
Bash shell
Nano text editor
CM12 discontinued Koush derived superuser
CM11 Forward ported custom host name
CM12 volume long press music track control
CM12 ad hoc wifi detection
CM12 camera power button shutter control
CM12 openssh command line utilities
CM12 custom quick settings
CM12 trebuchet launcher
The list of personal touches isn't very long right now but they include
Battery icon changes color based on percent: 0-15 red, 16-50 yellow, 51-100 green
Jelly bean style toasts
Android 4.x nav bar icons
Disabled SELinux at the kernel
Up to 1.6GHz CPU OC
Automatic 400MHz GPU OC
Not Working/Quirky
Bluetooth audio?? (can't test myself)
Stock camera randomly freezes. Just open it again
AOSP keyboard swipe doesn't work: google's fault.
Can't hear phone calls.
Flashing SuperSU might cause issues since the su daemon is started by the ram disk script since boot scripts apparently don't work.
Plugging in a charger when turned off causes the tablet to get stuck at animation loading
Everything else not listed as a quirk probably works.
*First Time or Coming from Omni 5.0.2*
-Read second post FAQ and other important information
-Make titanium backup (highly recommended)
-Flash TWRP 2.8.1.0
-Reboot into new recovery
-Make recovery backup (meh, I don't usually do it but you have been warned)
-Full wipe
-Format system
-Install rom
-install gapps (you can use another one if you want. I always provide the most minimum gapps)
-reboot
-install adblocker
*Subsequent flashes*
-Install ROM
-Install gapps
-Reboot into rom
-Reapply any adblocking hosts file.
Downloads
Gapps Android File Host (same one as omni 5.0)
TWRP Android File Host
Wifi ROM Android FIle Host
3G ROM Android FIle Host
Credits:
-decatf: your patches were vital to the rom
-drewwalton19216801: used your gapps for the minimal gapps package
-kasper_h: I learned a lot from doing kitkat with you last year
-pershoot: original device/vendor base
-omni team: providing rom
-cyanogenmod team: rom extras
Sources https://github.com/AAccount?tab=repositories
Screenshots to follow later
XDA:DevDB Information
[ROM][Wifi+3G][March 22]Omni 5.1, ROM for the Samsung Galaxy Tab 10.1
Contributors
AAccount
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: Omni, Cyanogenmod
Version Information
Status: Stable
Created 2015-03-22
Last Updated 2015-03-22
Reserved
Reserved #2
No more p4tmo?
Sweet!
Just one thing... am I blind or you just forgot the download link for the ROM?
They're under the Downloads section.
this ROM seems nice and fast! Breathes new life to the grab. Can anybody point me to a different gapps pack? (Not so slim) I have tried out downloading several but was not able to flash any of the the .zips in twrp.
rtiangha said:
No more p4tmo?
Click to expand...
Click to collapse
I'm waiting to hear back on if the 3G works. If it does then I'll to TMobile.
----------------------------------Added-----------------------------------------------
New weekly is up.
Very fast, much faster than 4.4.4, but 3g and keyboard not working...
VyKril said:
Very fast, much faster than 4.4.4, but 3g and keyboard not working...
Click to expand...
Click to collapse
Keyboard is easily fixable by just flipping some switches in the settings.
Major problems
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.
[evol] said:
Hi!
I'm new with flashing Samsung devices but i have flashed other and i thought this can not be so hard..
But now i need your help!
I wipe the whole thing nothing left, i can get in to recovery and i can load zip-files to the tab, but it says i have a P4wifi and I don't. What have I done wrong and is there anything I can do to fix this and flash Omni 5.1 for 3G tab?
I downloaded the omni-5.1-20150330-p4-HOMEMADE so I must have done something before this, maybe when i rooted the tab?
If u don't understand my english writing feel free to ask so maybe I can explain myself.
Click to expand...
Click to collapse
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app
Olivier V said:
Perhaps you flashed the wrong recovery? Try flashing the correct one and see what happens.
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Found a old recovery file from 2012, flashed that with Odin, manage to install the rom, but not the gapps.
"Android is processing" so something is happening. I will just wait and see.
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.
[evol] said:
Maybe I did?
There are so many files circulation out there so I´m getting confused.
Maybe you can point me in the right direction?
I downloaded the wifi rom, but no luck with that.
Click to expand...
Click to collapse
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app
Olivier V said:
First of all you need the 3G rom not the WiFi rom.
Download the recovery for your 3G tab from this post, flash it and see what happens.
http://forum.xda-developers.com/sho...ROM][Unofficial][AOSP] Android 5.1.0 Lollipop
Sent from my p4wifi using XDA Free mobile app
Click to expand...
Click to collapse
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.
[evol] said:
Hi thanks for your help!
I did an edit in my earlier post, and now i manage to install the 3G rom.
So I got my Tab up and running.
But I appreciate your help very much because I got two tabs, i bought them yesterday for 500SEK (57 US$) from a friend at work.
And now I don't want to make the same mistake again.
Click to expand...
Click to collapse
I'm glad it all worked out for you
Sent from my Z1 Compact
Awesome
Initial response is great. Checking into things. GReat job on what appears to be a solid rom.
Cant use 3g
Any ideas? ?
My 3G not working
Any solution?
Thanks
sidle said:
Keyboard is easily fixable by just flipping some switches in the settings.
Click to expand...
Click to collapse
Looks nice, still need to look into it.
Can't find what to change in the configuration to make the keyboard appears.
Can you guide me?
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Click to expand...
Click to collapse
Source
Tree: https://github.com/Alonso1398/android_device_samsung_ivoryss/tree/carbon-4.4
Kernel: https://github.com/Alonso1398/muZic_kernel_ivoryss/tree/cm-11.0
Vendor files: https://github.com/Alonso1398/proprietary_vendor_samsung_ivoryss
Patches:
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380.
Patch to frameworks/native to workaround hwc issues: https://gist.github.com/pawitp/7891444 (replace each time it says CAPRI with RHEA) and https://github.com/PAC-man/android_frameworks_native/commit/0c81fda74f6e7f9dc5f48bd00e4dbeaef12fdbc2.
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to hardware/libhardware/include/hardware/audio.h for microphone to work: https://gist.github.com/dhinesh77/7206ec7900bee32e4c51/revisions
Dual SIM Patches: https://gist.github.com/pawitp/9433442
Credits/thanks
Dhinesh77's device tree
Pawitp
Cyanogenmod Team
XDA forum
Carbon Rom Team
Requirements
-Updated CWM 6.0.5.0 or TWRP
-Have Stock 4.1 or CM 10.1
-Those having the DUOS variant should check if the name on the build.prop matches the name of the updater-script. If it doesn't, then edit the updater script.
Installation Instructions
-Make a backup just in case
-Wipe data/factory reset
-Install the rom
-Optionally install gapps (choose the package that suits you better)
Bugs/What's not working?
-Probably other features I may not use frequently
-Bluetooth half working
-3D perfomance and some games may have issues?
-The buttons for unlocking the sim will look smaller (but still usable) when dual sim activated
-Screen recorder of the rom
Download Links
Dropbox: soon
MEGA: https://mega.co.nz/#!UBIh1RaA!WsVsSD1aAbRAJ_-dn-wFLH0V_sNZmR-d75GunM8Q_mg
Changelog
RC 2
-Edits on source to fix systemupdateservice wake lock (I hope it worked)
-Small source updates
RC 1.1
-Quick release disabling low ram mode
*Enables lock screen widgets
RC 1
-Initial release
Multisim FAQ
How to enable/disable multisim?
Install a terminal and type the following
Enable:
Code:
su
setprop persist.radio.multisim.config dsds
Disable:
Code:
su
setprop persist.radio.multisim.config none
Or use the file manager in root mode, search for build.prop and change persist.radio.multisim.config=dsds (enable) or persist.radio.multisim.config=none (disable)
Dual SIM has the following limitations:
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
The QuickSettings tile will display the status for the currently selected SIM for data
Changing 2G/3G network mode using the QuickSettings toggle is not supported, only do it from Settings.
3G may not work properly if Dual SIM mode is enabled with only 1 SIM inserted
Ok, this rom seems pretty stable. I think dual sim should work and games like clash of clans won't close themseves. However I don't really know if lock screen widgets works (already searched on privacy and didn't found anything). For those who like features and doesn't need the lock screen widgets, this rom should be great
Edit: Ok, I found how to activate lock screen widgets. It seems it is necessary to disable low ram mode... Well, I'll release RC 1.1 with lock screen widgets working soon
Hi man, thanxs for the amazing rom, but i found the back and menu button doesn´t works and the keyboard give some fc.
ozezz said:
Hi man, thanxs for the amazing rom, but i found the back and menu button doesn´t works and the keyboard give some fc.
Click to expand...
Click to collapse
Hmm that's weird. I'm using it right now and I don't have those problems. Those problems happened to you only on this rom or also on other roms? And did you use CWM or TWRP?
Hi, well im using CWM but discovered that this trouble its related with the Gapps.. :S when i change the gapps using another micro or nano version everything works fine. so its not a issue directly of the rom.. and its awesome.. thanxs again..
Greetings
Is this ROM Better/More stable than NamelessRom? i still can't decide wich one to download...
By the way, youtube doesn't work correctly on CM 11.0 and SlimKat 4.4.4, videos just seem to keep buffering till a. The app crashes, or b. The entire cellphone restarts itself... so I'm trying these two and i need to know wich one is better (in terms of performance, and youtube)
Anyways thanks for giving ROMs to our old little Samsung Galaxy Music
GentaNx said:
Is this ROM Better/More stable than NamelessRom? i still can't decide wich one to download...
By the way, youtube doesn't work correctly on CM 11.0 and SlimKat 4.4.4, videos just seem to keep buffering till a. The app crashes, or b. The entire cellphone restarts itself... so I'm trying these two and i need to know wich one is better (in terms of performance, and youtube)
Anyways thanks for giving ROMs to our old little Samsung Galaxy Music
Click to expand...
Click to collapse
CM11 is the perfect ROM for this phone. For YouTube, try either this version of the YouTube app or any of the alternate apps from the F-Droid repository.
rahimali said:
CM11 is the perfect ROM for this phone. For YouTube, try either this version of the YouTube app or any of the alternate apps from the F-Droid repository.
Click to expand...
Click to collapse
I see, i'll try CM11 again, i uninstalled it from my phone because of YouTube..
Another problem is, when i try to download the YouTube app that you recommended me, (clicking the blue button) the page just times out, is there another link to download it? Mediafire or other? Thanks in advance :good:
GentaNx said:
I see, i'll try CM11 again, i uninstalled it from my phone because of YouTube..
Another problem is, when i try to download the YouTube app that you recommended me, (clicking the blue button) the page just times out, is there another link to download it? Mediafire or other? Thanks in advance :good:
Click to expand...
Click to collapse
Yes, here
rahimali said:
Yes, here
Click to expand...
Click to collapse
Thank you very much, now i can enjoy KitKat at it's fullest! :good:
Mobile Restarts On Welcome Screen
Hey Guys I am using SM-S6012 and the rom Boots up and has no problem like bootloop but after booting on the Welcome Screen it says choose language and After choosing the right language when i click next. BOOM the Mobile just restarts. I don't know what the problem is. But anyone please help me.
_Azaan_ said:
Hey Guys I am using SM-S6012 and the rom Boots up and has no problem like bootloop but after booting on the Welcome Screen it says choose language and After choosing the right language when i click next. BOOM the Mobile just restarts. I don't know what the problem is. But anyone please help me.
Click to expand...
Click to collapse
Which ROM are you flashing? Carbon? Did you try any of the others? CM11? If not, try flashing that. Don't flash GApps immediately. Just flash ROM and boot the phone. Let everything settle down for about five minutes and then flash GApps.
Yes
rahimali said:
Which ROM are you flashing? Carbon? Did you try any of the others? CM11?
Click to expand...
Click to collapse
Yes, I've tried flashing Carbon ROM And I also flashed CM 10.1 But it had the same issues. And I haven't tried flashing CM 11 because It has some confusing method like Build. prop.
_Azaan_ said:
Yes, I've tried flashing Carbon ROM And I also flashed CM 10.1 But it had the same issues. And I haven't tried flashing CM 11 because It has some confusing method like Build. prop.
Click to expand...
Click to collapse
No confusion. Flash if normally. Forget about build.prop. But flash first without GApps.
ohh I have a question!!
rahimali said:
No confusion. Flash if normally. Forget about build.prop. But flash first without GApps.
Click to expand...
Click to collapse
Are you saying that I Can Flash CM 11 and i won't have any problem like before. But before that Let me tell you that I Flashed All the roms through Android 4.0.4 ICS.
rahimali said:
Yes, here
Click to expand...
Click to collapse
Hello, I'm really sorry to bump this thread, but, some time ago, it seems like this youtube app just stopped working, it just gives an error (401 or something like that) or it straight out tells me that a new version of youtube is available (The broken, original one from the playstore).
So, basically, is there another modified youtube app I can try out that allows me to watch videos on 4.4.4 again? The original YouTube still buffers forever :crying:
Again, sorry for bumping this thread, I hadn't had the time to post this here...
GentaNx said:
Hello, I'm really sorry to bump this thread, but, some time ago, it seems like this youtube app just stopped working, it just gives an error (401 or something like that) or it straight out tells me that a new version of youtube is available (The broken, original one from the playstore).
So, basically, is there another modified youtube app I can try out that allows me to watch videos on 4.4.4 again? The original YouTube still buffers forever :crying:
Again, sorry for bumping this thread, I hadn't had the time to post this here...
Click to expand...
Click to collapse
Try one of these. Of these, I've personally used NewPipe, SkyTube and Webtube and they all work without issue. Do try them out and provide feedback here so others can also benefit from your experience...
rahimali said:
Try one of these. Of these, I've personally used NewPipe, SkyTube and Webtube and they all work without issue. Do try them out and provide feedback here so others can also benefit from your experience...
Click to expand...
Click to collapse
I'm sorry to say that none of these work on a Samsung Galaxy Music S6010 with CM11.0, they all have the same issue of not playing the video at all, and crashing if they're not closed on time...
I guess there are no other alternatives other than to flash back to 4.1.2 ????
4.1.2 is barely usable because of all the bloatware it has, or i don't know what is it that makes it so... laggy.
Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid
Reserved 1 (Screenshots)
Someone please share some screenshots!
FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.
yess i'v ben waiting for this rom to get MM
ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try
nice new rom for s3 thinks Dev
spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?
Are you maintaining this ROM now?
sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!
sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks
sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result