Related
Hello All,
I am on stock v4.1.2, flashed myself.
Now I want to move on to custom ROM.
My current stock ROM is rooted, and I have also unlocked my bootloader.
Now when I want to install custom ROM, I need to flash CWM, and when I do (tried v6.2.8 and v6.0.3.1), and install any ROM, my WiFi becomes unresponsive (failed to turn on). When I flash V20A back, everything turns normal.
I also gone through http://forum.xda-developers.com/showthread.php?t=2180138&page=43, and install the unsecure boot image after installing CWM 6028, but this make my custom rom hang on startup (on bootload screen).
Kindly help me out.
I have search a lot in the P880 forum, and didn't find any help regarding to this problem.
[email protected] said:
Hello All,
I am on stock v4.1.2, flashed myself.
Now I want to move on to custom ROM.
My current stock ROM is rooted, and I have also unlocked my bootloader.
Now when I want to install custom ROM, I need to flash CWM, and when I do (tried v6.2.8 and v6.0.3.1), and install any ROM, my WiFi becomes unresponsive (failed to turn on). When I flash V20A back, everything turns normal.
I also gone through http://forum.xda-developers.com/showthread.php?t=2180138&page=43, and install the unsecure boot image after installing CWM 6028, but this make my custom rom hang on startup (on bootload screen).
Kindly help me out.
I have search a lot in the P880 forum, and didn't find any help regarding to this problem.
Click to expand...
Click to collapse
i dont understand what the recovery has to do with the wifi. recovery is just an interface to easy install something, copy paste , edit , change permissions , etc , things we do using adb commands. it is just an environment. its something else u are doing wrong there.
<EDIT> yea i saw the thread on your link. others seem to have same problem but with the unsecure boot. why do u need unsecure boot if the bootloader is unlocked ? just install teamwin recovery or cwm recovery and the rom u want.
kessaras said:
i dont understand what the recovery has to do with the wifi. recovery is just an interface to easy install something, copy paste , edit , change permissions , etc , things we do using adb commands. it is just an environment. its something else u are doing wrong there.
<EDIT> yea i saw the thread on your link. others seem to have same problem but with the unsecure boot. why do u need unsecure boot if the bootloader is unlocked ? just install teamwin recovery or cwm recovery and the rom u want.
Click to expand...
Click to collapse
Well, I did. And it all went fine, and I am able to install various custom ROMs, and after I install custom ROM, my WiFi becomes unresponsive. I am completely at lost. I also tried MIUI v5 which is non-CM10.2 based, and it also showed the same issue.
Here are my steps to install a custom ROM.
- Currently I am on my V20A stock ROM.
- Root the stock ROM using the All-In-One-Toolkit v1.4.1
- Flush the CWM 6031 using ADB as
Code:
su
cat /mnt/sdcard/recovery.img > /dev/block/mmcblk0p1
sync
- After reboot, my device has the CWM.
- Copy custom ROM zip files to my device, and reboot to recovery
- Wipe out by data and cache
- Install ROM
thats it
And when I boot into the new custom ROM, my WiFi do not work.
Please help.
[email protected] said:
Well, I did. And it all went fine, and I am able to install various custom ROMs, and after I install custom ROM, my WiFi becomes unresponsive. I am completely at lost. I also tried MIUI v5 which is non-CM10.2 based, and it also showed the same issue.
Here are my steps to install a custom ROM.
- Currently I am on my V20A stock ROM.
- Root the stock ROM using the All-In-One-Toolkit v1.4.1
- Flush the CWM 6031 using ADB as
Code:
su
cat /mnt/sdcard/recovery.img > /dev/block/mmcblk0p1
sync
- After reboot, my device has the CWM.
- Copy custom ROM zip files to my device, and reboot to recovery
- Wipe out by data and cache
- Install ROM
thats it
And when I boot into the new custom ROM, my WiFi do not work.
Please help.
Click to expand...
Click to collapse
not exactly.
And here are my steps to install a custom ROM (if currently I am on my V20A stock ROM)
1. Root the stock ROM using the All-In-One-Toolkit v1.4.1
2. Unlock bootloader using All-In-One-Toolkit v1.4.1 or manually like this.
3. Flash the CWM 6.0.4.5 or 6.0.4.4 or TeamWin Recovery
4. Reboot the device in recovery.
5. Enter ADB sideload and install custom rom or using ADB bootloader or using ADB copy the rom in sd card and use install in recovery.
6. Wipe data and cache and reboot system.
<<STEPS DESCRIBED IN HELP SECTION - FREQUENTLY ASKED QUESTIONS>> ( by the way those must be updated too )
kessaras said:
not exactly.
And here are my steps to install a custom ROM (if currently I am on my V20A stock ROM)
1. Root the stock ROM using the All-In-One-Toolkit v1.4.1
2. Unlock bootloader using All-In-One-Toolkit v1.4.1 or manually like this.
3. Flash the CWM 6.0.4.5 or 6.0.4.4 or TeamWin Recovery
4. Reboot the device in recovery.
5. Enter ADB sideload and install custom rom or using ADB bootloader or using ADB copy the rom in sd card and use install in recovery.
6. Wipe data and cache and reboot system.
<<STEPS DESCRIBED IN HELP SECTION - FREQUENTLY ASKED QUESTIONS>> ( by the way those must be updated too )
Click to expand...
Click to collapse
I did wipe the data and cache after installing the custom ROM. But the result is the same; No WiFi response.
However, I always copy my custom ROMs by mounting my phone through USB to my Win8 laptop, and then copy the ROM file through windows explorer. And then install the ROM from the CWN recovery. Thus do not use ADB for copying files, or installing custom ROM as mentioned above. If this is the main issue reason, then advice.
Also I haven't tried TWRP till yet. Will do now. Till then, what else I can do.
Thanks for the quick replies.
i dont know what else you may doing wrong then. one was the insecure boot which is useless since u have unlocked the bootloader and the other that u had flash older version of cwm recovery. maybe compatibility issue with that version of cwm rec ? test and see.
format system also, when installing a new rom, not just data, cache & dalvik
kessaras said:
i dont know what else you may doing wrong then. one was the insecure boot which is useless since u have unlocked the bootloader and the other that u had flash older version of cwm recovery. maybe compatibility issue with that version of cwm rec ? test and see.
Click to expand...
Click to collapse
One piece of detail I missed to mentioned in my case previously was that, I unlocked my phone using the method mentioned in the thread http://forum.xda-developers.com/showthread.php?t=2263627 as I was unable to unlock using the official method.
After I unlock my bootloader, I have flashed V20A KDZ several times, and each time the SW Upd mode show me that my bootloader status is unlocked. Thus after first attempt of unlocking, I never came across need to unlocked my bootloader again as each time when I do the KDZ flash, I get the bootloader status as unlocked. And after each flash of KDZ, I was able to install CWM and custom ROMs, and boot into them successfully.
Is this something causing the issue?
[email protected] said:
One piece of detail I missed to mentioned in my case previously was that, I unlocked my phone using the method mentioned in the thread http://forum.xda-developers.com/showthread.php?t=2263627 as I was unable to unlock using the official method.
After I unlock my bootloader, I have flashed V20A KDZ several times, and each time the SW Upd mode show me that my bootloader status is unlocked. Thus after first attempt of unlocking, I never came across need to unlocked my bootloader again as each time when I do the KDZ flash, I get the bootloader status as unlocked. And after each flash of KDZ, I was able to install CWM and custom ROMs, and boot into them successfully.
Is this something causing the issue?
Click to expand...
Click to collapse
Now, I have repeated using CWM 6.0.4.5 and TWRP, and no breakthrough .... Starting to lose hope ... Help !!!
sorry , personally i dont know what else u may doing wrong there . and no it doesnt matter which way u unlock the phone, but since u unlock it , it stays that way until u lock it.
at least stock rom is working fine ? if that works fine there, then just install only custom kernel, do your tweaks, install another launcher and then delete the default, etc. u can do any modification u like to the stock one to make it look and work the way u want it.
kessaras said:
sorry , personally i dont know what else u may doing wrong there . and no it doesnt matter which way u unlock the phone, but since u unlock it , it stays that way until u lock it.
at least stock rom is working fine ? if that works fine there, then just install only custom kernel, do your tweaks, install another launcher and then delete the default, etc. u can do any modification u like to the stock one to make it look and work the way u want it.
Click to expand...
Click to collapse
Does it help if I installed a custom kernel on my custom ROM (with WiFi issue). My understanding is that the WiFi driver is compiled inside the kernel. So changing the kernel might reduce the issue. What do you think? If yes, then kindly advice me on which kernel should I install on my till now custom ROM MIUI v5 http://en.miui.com/download-79.html.
[email protected] said:
Does it help if I installed a custom kernel on my custom ROM (with WiFi issue). My understanding is that the WiFi driver is compiled inside the kernel. So changing the kernel might reduce the issue. What do you think? If yes, then kindly advice me on which kernel should I install on my till now custom ROM MIUI v5 http://en.miui.com/download-79.html.
Click to expand...
Click to collapse
a developer would never release a rom in public with wifi issues by default and since i have already tested all roms available before i end up to one, i can say that they all worked , but only had small bugs on homescreen. really i dont know what you are doing wrong and not even a teamviewer connection wouldnt help in this case. but on stock your phone works fine ? only in a custom rom u have this issue ?
<<EDIT>> did you also do a full format before going to another rom ? there is a choice in teamwin recovery ( dont know if its in cwm also ) to format data. careful i dont mean to wipe everything you see because you will remove the recovery too and u will have to flash it back. the format option deletes everything besides the recovery. if you dont format before you go to a totally different rom, then you maybe have issues. especially when going from stock to custom, differences are huge. you must format before flashing. and dont forget the gapps, if they are not inluded in rom. ( in your case miui there must have them inside, because i see its 256 mb+)
kessaras said:
a developer would never release a rom in public with wifi issues by default and since i have already tested all roms available before i end up to one, i can say that they all worked , but only had small bugs on homescreen. really i dont know what you are doing wrong and not even a teamviewer connection wouldnt help in this case. but on stock your phone works fine ? only in a custom rom u have this issue ?
<<EDIT>> did you also do a full format before going to another rom ? there is a choice in teamwin recovery ( dont know if its in cwm also ) to format data. careful i dont mean to wipe everything you see because you will remove the recovery too and u will have to flash it back. the format option deletes everything besides the recovery. if you dont format before you go to a totally different rom, then you maybe have issues. especially when going from stock to custom, differences are huge. you must format before flashing. and dont forget the gapps, if they are not inluded in rom. ( in your case miui there must have them inside, because i see its 256 mb+)
Click to expand...
Click to collapse
YES. When I flashed stock V20A, I never had issues with Wifi. Its when I install custom ROM, and any custom ROM.
So I suppose, either there is something wrong in my installing method, or in my stock ROM that won't allow WiFi to work on any custom ROM. But how much influential will be the stock ROM if it is being replaced by a custom ROM?
Well, I haven't formated before I install any custom ROM, as it was not instructed in the forums. But I will do that now, and let you know the results shortly.
Thanks again for the replies.
[email protected] said:
Well, I haven't formated before I install any custom ROM, as it was not instructed in the forums.
Click to expand...
Click to collapse
yea some informations are always missing from the instructions generally , but this is a developer forum , so it doesnt always include informations that are 100% well known to be done. So format and install again and tell me if its everything ok.
kessaras said:
yea some informations are always missing from the instructions generally , but this is a developer forum , so it doesnt always include informations that are 100% well known to be done. So format and install again and tell me if its everything ok.
Click to expand...
Click to collapse
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.
[email protected] said:
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.
Click to expand...
Click to collapse
What?????
Why would wiping your /data folder on internal storage delete your custom ROMs? Surely you keep them on your external SD-Card?
[email protected] said:
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.
Click to expand...
Click to collapse
you dont need to copy it . u can open adb sideload from recovery and on pc use command : adb sideload [path/filename of rom.zip]
SimonTS said:
What?????
Why would wiping your /data folder on internal storage delete your custom ROMs? Surely you keep them on your external SD-Card?
Click to expand...
Click to collapse
So you are saying that, I copy them to external_sd, and then do the data format. Ok ... Will do and let you know.
BTW, I also found V20B. I will start with this stock rom instead of V20A. This might improves some thing.
[email protected] said:
So you are saying that, I copy them to external_sd, and then do the data format. Ok ... Will do and let you know.
BTW, I also found V20B. I will start with this stock rom instead of V20A. This might improves some thing.
Click to expand...
Click to collapse
AT LAST .... FIXED ...
I did two things, V20B, and format /system, /data before installing new ROM. So my steps were:
1) Flush V20B instead of V20A
2) After rooting, and installed CWM 6044 touch, copy custom ROM MIUI to external SDCARD
3) Reboot into recovery, and format /system, /data, and /cache partitions
4) Install custom ROM from external SDCARD
5) Wipe data and cache
6) Reboot into the new world
:good: formatting did the work sorry i didnt think of it earlier.
As the title states, is there a way to flash a new rom without being tied down to a PC / laptop?
Bootloader's unlocked, rooted, it's strange how with this phone we're forced to stay locked down to a PC.
Have never flashed anything from the Original Dev section on this phone yet, would that be the same method as normal rom's like monx's and IHackers?
Cheers.
huh? TFTs are for returning to stock ROM and/or kernel and baseband, custom ROMs come in ZIP files which are flashable in recovery. What I do is download the ROM zip on my phone and flash it straight after via recovery, no need for a computer at all.
tomascus said:
huh? TFTs are for returning to stock ROM and/or kernel and baseband, custom ROMs come in ZIP files which are flashable in recovery. What I do is download the ROM zip on my phone and flash it straight after via recovery, no need for a computer at all.
Click to expand...
Click to collapse
FTF's are not just for returning to stock, not at all, they're used to flash rom's too as the kernel and baseband needs to be flashed also.
Check out monx's thread, the instructions for install states to flash the rom and then without allowing a reboot, flash kernel and system (afaik)
Simply flashing the rom wouldn't be enough without flashing those files via flashtool.
What i'm trying to ascertain is do I have to do this every time as it's a pain in the backside.
Quote from Monx
LOCKED & UNLOCKED BOOTLOADER
BACKUP any critical data to microSD
Copy this rom zip package to microSD
Reboot in recovery, (do nandroid backup), do factory reset & install rom until finish
IGNORE RECOVERY INSTALLATION WARNING. SELECT NO & PROCEED AT THE END OF RECOVERY IF USING CWM RECOVERY
Skip (x) steps if u already running same base firmware with latest monxDIFIED base rom. Else, proceed.
(x) Turn off device. (Hold power button + vol up until vibrates 3 times) [or use recovery turn off device option, if any]
(x) Flash latest Sony's firmware (FTF) matching current latest monxDIFIED base rom using latest flashtools. UNCKECK all WIPE options and CHECK only SYSTEM & TA in EXCLUDE options.
(x) Disconnect USB cable & turn on phone. Done.
Notice how I write "and/or kernel and baseband"?
FTF only necessary if changing bases, don't need to flash every time going from ROMs on same base.
Sent from my C6903 using Tapatalk
tomascus said:
Notice how I write "and/or kernel and baseband"?
FTF only necessary if changing bases, don't need to flash every time going from ROMs on same base.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Because you wouldn't be performing a full wipe right?
Thing is I would never do a dirty flash over another rom, you're asking for problems if you do, so in which case I'm guessing that I'd need to use an FTF file to replace the files needed that aren't flashed with the rom right?
Thanks by the way.
Reason i'm asking all this is because this is the first phone that i've had were i've needed to be tied down to a PC to flash a rom, it's a bit crap really.
dladz said:
Because you wouldn't be performing a full wipe right?
Thing is I would never do a dirty flash over another rom, you're asking for problems if you do, so in which case I'm guessing that I'd need to use an FTF file to replace the files needed that aren't flashed with the rom right?
Thanks by the way.
Reason i'm asking all this is because this is the first phone that i've had were i've needed to be tied down to a PC to flash a rom, it's a bit crap really.
Click to expand...
Click to collapse
I used to have the HTC One X which required the same trouble-some computer steps.
The kernel and baseband don't even get affected when you do a full wipe, they're separate from the system, data, and cache partitions which gets wiped. Basically the stripped FTF holds the stock kernel and baseband needed to get compatible mobile signal and this only needs to be done once moving from base to base.
Going to and from ROMs with same base:
1. Full wipe
2. Flash ROM
ps. some ROMs flash their own kernel during ROM install i.e iHackers.
tomascus said:
I used to have the HTC One X which required the same trouble-some computer steps.
The kernel and baseband don't even get affected when you do a full wipe, they're separate from the system, data, and cache partitions which gets wiped. Basically the stripped FTF holds the stock kernel and baseband needed to get compatible mobile signal and this only needs to be done once moving from base to base.
Going to and from ROMs with same base:
1. Full wipe
2. Flash ROM
ps. some ROMs flash their own kernel during ROM install i.e iHackers.
Click to expand...
Click to collapse
Nice one m8, that's put an end to my misery, cheers for that, makes a lot of sense now, i wasn't aware of how Sony rom's were flashed, it's strange as the bootloader is unlocked? What more is needed lol.
As for the one x, that's the only HTC i skipped and glad i did apparently they had a lot of problems with flashing and stuff, S-OFF.
Anyway, thanks m8.
Hi, device is rooted, and clockworkmod recovery 6.0.4.5 installed.
ROM is JB, the official update from LG. Today device reported there is an update to the installed firmware.
I rebooted in CM recovery, took a nandroid backup, booted, and accepted to download the official update to my official JB rom. After downloading I was asked to reboot (in order to install), and the phone reboots to the CM recovery.
From there I don't know what to do. I have tried rebooting, but again find myself to the CM recovery. I have tried "reboot to bootloader" and get stuck at the LG boot screen logo with the message "Now Ready!" in tiny white letters on the upper left corner.
I would try "install zip" but I don't know where the downloaded update is (if it even is in an acceptable zip format)
Phone isn't bricked, I guess I can always restore from the recently taken backup, but I really would like to know if there is a way to install this update.
Thank you
http://forum.xda-developers.com/showthread.php?p=50645445
Could you please please please try to search the next time I've seen this question for probably 3-4 times
Sent from my LG-P880 using xda app-developers app
you can't ota over unlocked bl/cwm, you must flash update manually
moneyvirus said:
http://forum.xda-developers.com/showthread.php?p=50645445
Could you please please please try to search the next time I've seen this question for probably 3-4 times
Click to expand...
Click to collapse
You're right, but you know, sometimes you just can't nail the right keywords especially if its not your native language. I searched, but obviously not good enough.
Rudjgaard said:
you can't ota over unlocked bl/cwm, you must flash update manually
Click to expand...
Click to collapse
Sadly, this seems to be the case.. bummer.
Thanks everyone
Not even my nandroid backup can help me get to where I was before? So much for nandroid being the ultimate backup, a "snapshot image" of the device...
So, what if, I use CM recovery to install a custom rom, and then restore from my nandroid backup (being the official JB) ?
Flash with kdz flasher original ROM then flash cwm you can put back your backup. I think the problem starts that the update pushes something in the boot section that is expecting an other (read original) recovery . when you installed cwm it boots up cwm so that's why an nandroid backup doesn't work I think ( to be honest I'm not 100% sure this is correct)
Sent from my LG-P880 using xda app-developers app
I can't even flash cyanogenmod???
I downloaded latest stable build, copied it to sd card, selected it from the CM recovery ("install zip"), installed fine, reboot, still stuck at CM recovery!!!
What gives?
EPa said:
I can't even flash cyanogenmod???
I downloaded latest stable build, copied it to sd card, selected it from the CM recovery ("install zip"), installed fine, reboot, still stuck at CM recovery!!!
What gives?
Click to expand...
Click to collapse
Have you yet followed the advice and installed the KDZ?
Trying to avoid that, as it seems too much work for a phone that was working fine, and stuck to recovery due to some silly boot flag or something.
Saw it as a chance to try cyanogenmod. But it seems having CM recovery and the cyanogenmod rom on the sd card won't cut it! Talk about failure..
EPa said:
Trying to avoid that, as it seems too much work for a phone that was working fine, and stuck to recovery due to some silly boot flag or something.
Saw it as a chance to try cyanogenmod. But it seems having CM recovery and the cyanogenmod rom on the sd card won't cut it! Talk about failure..
Click to expand...
Click to collapse
I don't think you will have a choice. If you created the nandroid backup on your SD card then you aren't going to lose it, so just flash the KDZ, root again and install your backup, or accept the LG update and rebuild all your software again.
Yes, one thing is for sure. I had to install the KDZ to be able to proceed with anything..
It's just funny having a working CWM recovery and a cyanogen rom on the device and after flashing it, still not having a device that boots. A "recovery"/flash tool, should be able to "recover" from such a situation..
EPa said:
Yes, one thing is for sure. I had to install the KDZ to be able to proceed with anything..
It's just funny having a working CWM recovery and a cyanogen rom on the device and after flashing it, still not having a device that boots. A "recovery"/flash tool, should be able to "recover" from such a situation..
Click to expand...
Click to collapse
You can't blame the recovery. It is clearly stated many, many times that you should never attempt an official OTA update with a non-standard (rooted or recovery installed) device. On other devices you could even hard-brick AFAIK, so consider yourself lucky that you only had to reflash a KDZ and start again.
For restoring stock rom use this: http://forum.xda-developers.com/showthread.php?t=2682146 I can confirm it works and it is (very) easy.
Yes that's what I used and I also confirm it works and is very easy.
Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks
What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app
Do you know what I can at least try?
If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.
Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100
my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?
Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100
Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )
danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/
So last time my phone was stuck on the device name and model number screen. I solved that issue by flashing TWRP using Odin.
but now the phone would not go past the boot screen no matter what I do. I re-flashed CM11 4 times now, factory reseted and wipe cache and dalvik cache. What should I do?
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
maultasche said:
1. change your thread title please. Need help is not really helpful or directs to your issue.
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
So I should flash TWRP 2.8.5.0 and flash CM11 again? (because I don't have stock rom for S3 LTE)
Where can I get stock rom fro S3 LTE I can't seem to find it all, I find is firmwares.
Also, a few questions
1) If I give it into my phone carrier (Optus) would they know that it is rooted?
2) If they know it is rooted and with a custom rom and don't fix it for free is it possible to get it fixed by paying money??
The firmware provided by Samsung is the stock ROM I'm talking about
No, since you tried to flash a ROM through the faulty recovery you need to flash either official firmware from Samsung or a custom ROM based on Samsung stock like AMCHA or N4 Elite. I'd recommend to go with official Samsung firmware. After that go to stock recovery (it will come when you flash official firmware), do a factory reset and let the phone boot once. After that you can flash TWRP 2.8.5.0 and flash any ROM you want.
The new recovery from TWRP is too big for the S3. The S3 recovery is a little over 8MB, the new one needs more and messes up partitions etc. You won't be able to mount /system, /data and the recovery can't read your internal partitions as it should. Go with the way I provided. It seems like a lot of work but it's done in a few minutes.
For your two questions: yes and yes. But you can fix that on your own and don't need your operator or Samsung to get your phone fixed.
Thanks a lot for helping. I was scared to death cause if something happened I would've had to start using a old brick Nokia phones
Is it possible that after I flash the stock firmware, my phone still doesn't boot up?
I am basically a level above newbie, so I don't get what is happening. I see tutorials and do what they tell me to do. sometime I get what I am doing sometime I don't
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
maultasche said:
as i said, after flashing stock, go into the recovery and do a factory reset. The phone will boot then
Click to expand...
Click to collapse
Ok sorry for doubting you! My phone is working now, thanks a lot for your help
Glad it's working now, you're welcome
I have rooted my s3 via odin and now i wont to flash twrp via flashify. Now i have a bootloop on my s3. How can i recover the phone. i am a noob on s3 and i don*t know how i could go into fastbootmode. Please help me.
what S3 do you have? Which recovery did you flash?
maultasche said:
2. what version of TWRP are you using? The official TWRP 2.8.7.0 does not work. Too long to explain why's that. To fix this issue there are some solutions if you flashed the faulty recovery:
- flash Stock ROM again and stay on TWRP 2.8.5.0
- some users fixed this issue by just flashing another recovery or just flashing a stock based custom rom to get their phone working. You still need to change recovery.
In my case I had to flash stock again and flash my preferred recovery again to get my phone working.
Click to expand...
Click to collapse
I had this problem too! Flashed stock rom, then flashed TWRP 2.8.5.0 (I was using 2.8.7.0) and then flashed cyanogenmod 12 and boom it booted and worked!
Thank you very much!