Database Develop

Help About Stock 4.1.2

Hi everyone.Ive just flashed offical german rom recently.But Im really regret about it.So, I decided to change Ultimate v5.02 instead this rom.But I couldnt because of this error "e-signature verification failed"
How can I flash ultimate from the stock rom?
Note: I search the forum to find cf root for Odin version,but couldnt
(philsz cwm-6 not working either)

....
---------- Post added at 04:31 PM ---------- Previous post was at 04:13 PM ----------
http://forum.xda-developers.com/showthread.php?t=1329360
follow these steps for rooting and flashing CWM 1st!!be very careful if ur coming from stock,then flash this kernel http://forum.xda-developers.com/showthread.php?t=2053084
im sure u will be able to flash the ROM after u have followed these steps
---------- Post added at 04:46 PM ---------- Previous post was at 04:31 PM ----------
i edited ok..u have to flash a safe kernel 1st

f0xtr0t said:
....
---------- Post added at 04:31 PM ---------- Previous post was at 04:13 PM ----------
http://forum.xda-developers.com/showthread.php?t=1329360
follow these steps for rooting and flashing CWM 1st!!be very careful if ur coming from stock ICS .
then after this u'd prolly be able to flash the ultimate v5.2
if u still cant flast,then flash this kernel http://forum.xda-developers.com/showthread.php?t=2053084
im sure u will be able to flash the ROM after u have followed these steps
Click to expand...
Click to collapse
thanks for your answer. I didnt mention for my rom,sorry about that The rom is 4.1.2. german stock.
So, I tried to install philz cwm 6.zip , but I got same error message "e signature verification failed"
(I didnt try exynose abuse method, it seems too risky )

canerdogan01 said:
thanks for your answer. I didnt mention for my rom,sorry about that The rom is 4.1.2. german stock.
So, I tried to install philz cwm 6.zip , but I got same error message "e signature verification failed"
(I didnt try exynose abuse method, it seems too risky )
Click to expand...
Click to collapse
is your phone rooted??in the stock 4.1.2 german stock?

I think you should restart with PC Odin and the official stock JB.
This would result in a exactly described state of your device. Or give exact error messages for a specific step you did.

ok..now u got an expert to help you out!!dont brick your device good luck hehe

f0xtr0t said:
is your phone rooted??in the stock 4.1.2 german stock?
Click to expand...
Click to collapse
ThaiDai said:
I think you should restart with PC Odin and the official stock JB.
This would result in a exactly described state of your device. Or give exact error messages for a specific step you did.
Click to expand...
Click to collapse
I have jz054k 4.1.2 german stock rom.I guess,the stock rom doesnt allow to install cwm6.zip (or ultimate v5.02)
I sent the cwm6.zip and ultimate v5.02.zip to external sdcard.when I was trying to install these, it says (with red title) " e-signature verification failed"
How can I solve this problem.If I root my phone, can I install the ultimate rom?

without rooting.. u cant
Sent from my GT-N7000 using XDA Premium App
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
i mean rooting.. then flashing cwm... try the speedmode cwm.. after this flash safe kernel and then ur good to go
Sent from my GT-N7000 using XDA Premium App

f0xtr0t said:
without rooting.. u cant
Sent from my GT-N7000 using XDA Premium App
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
i mean rooting.. then flashing cwm... try the speedmode cwm.. after this flash safe kernel and then ur good to go
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I cant root with cwm.zip file.Is there a root file to use with odin pc?

use supersu to root
Sent from my GT-N7000 using Tapatalk HD
---------- Post added at 09:05 PM ---------- Previous post was at 08:58 PM ----------
i think ur stock rom is rooted.. check if supersu is there
Sent from my GT-N7000 using Tapatalk HD
---------- Post added at 09:09 PM ---------- Previous post was at 09:05 PM ----------
canerdogan01 said:
I cant root with cwm.zip file.Is there a root file to use with odin pc?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1901191
refer to this thread?
http://forum.xda-developers.com/showthread.php?t=1746794 and this

You can use the supersu zip file mentioned in 1B of this thread to root
http://forum.xda-developers.com/showthread.php?t=1329360

[Q] Touch screen not working, help

Never thought I would have to make this kind of thread... But anyway. I was going to update to 4.3. So I updated to the new firmware. That ran fine and I figured I should wipe my phone. When I got to twrp I noticed the buttons weren't working. So I shut down and restarted normally. Phone boots up fine, but the screen still isn't working. Then I noticed that twrp had a new version. So I download that, but flashing from fastboot doesn't work. It gets to writing recovery then fails(remote: not allowed). I am s-off. SO CONFUSED
tldr: phone screen is not working, can not update to twrp 2.6.3.0 to flash a 4.3 rom

Downgrade tp firmware to 1.29...will send link.
Sent from my HTCONE using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
http://forum.xda-developers.com/showthread.php?p=46225907
Sent from my HTCONE using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:46 PM ----------
Just the touch panel firmware.
Sent from my HTCONE using XDA Premium 4 mobile app

[q] problems rooting again after verizon update

I will be completely honest I am a complete retard when understanding how rooting works... But I have done the process a dozen of times and I havent had any major problems but for this root I cant figure it out! So here is my problem....
Verizon sent me an update to the newest system version (98.72.189.XT894.Verizon.en.US) so naturally I downloaded and installed the update and it UNROOTED my phone! I no longer have safestrap and superuser access and such. So I have tried different techniques and different programs on rooting this bad boy such as Motofail and Razrs_edge and I still cant get it to work... Both programs have the usual errors of "Permission Denied" or "Unable to". So all and all.... I NEED HELP!
Here is what I do know like im 99% sure about
-I have all the drivers and their is no yellow triangle and I have motorola device manager.
-I have Unknown Sources checked and USB debugging checked.
-I also forced stopped smart actions cuz I read on a post that I was causing problems while rooting.
Here is what I do NOT know
-Which USB mode do I need to be on? Mass Storage? MTP? idk!
-Do it matter that I am on 4.1.2?
Again I want to thank you for your time and I really would like some help with this darn thing! I am kinda desperate right now..
-Avethepizzaman

Hi,
The old root method won't work after the OTA update.
You need to use this method:
http://forum.xda-developers.com/showthread.php?p=50705053
Worked for me fine.
Sent from my DROID4 using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:25 PM ----------
Not sure I linked the right post, but you can find it on that page.
I link it here directly, too:
http://download959.mediafire.com/6zkoserzajyg/7jzmv7c7bijvbmn/saferoot-moto.zip
Sent from my DROID4 using xda app-developers app

IT WORKED!
Wow I didnt even cross those links but they worked perfectly!
Thank you so much!
nagim said:
Hi,
The old root method won't work after the OTA update.
You need to use this method:
http://forum.xda-developers.com/showthread.php?p=50705053
Worked for me fine.
Sent from my DROID4 using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:25 PM ----------
Not sure I linked the right post, but you can find it on that page.
I link it here directly, too:
http://download959.mediafire.com/6zkoserzajyg/7jzmv7c7bijvbmn/saferoot-moto.zip
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse

No problem, glad it worked!
Sent from my DROID4 using xda app-developers app

Cant patch for GSM

Hello,
I couldnt find it anywhere. I wanted to use this patch - http://forum.xda-developers.com/showthread.php?t=2394689 because with CM 10.2 I cant send sms. But always when I try to instal it. The instalation is aborded. Anybody know where can be problem?
Thank you

Which safestrap version are you using?
Sent from my DROID4 using xda app-developers app
---------- Post added at 10:45 AM ---------- Previous post was at 10:03 AM ----------
Sent from my DROID4 using xda app-developers app
---------- Post added at 10:52 AM ---------- Previous post was at 10:45 AM ----------
Also make sure you are using the latest version of the patch.
Sent from my DROID4 using xda app-developers app

nagim said:
Which safestrap version are you using?
Sent from my DROID4 using xda app-developers app
---------- Post added at 10:45 AM ---------- Previous post was at 10:03 AM ----------
Sent from my DROID4 using xda app-developers app
---------- Post added at 10:52 AM ---------- Previous post was at 10:45 AM ----------
Also make sure you are using the latest version of the patch.
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
I used 3.5 patch which I think is the last one. And safestrap 3.65

There is a new safestrap version (you can find the thread in the development section), try to install the script after upgrading safestrap (you can find the instructions there). If that's not working, let Mentor know in the patch's thread.
Sent from my DROID4 using xda app-developers app
---------- Post added at 09:09 PM ---------- Previous post was at 09:05 PM ----------
One more thing: have you edited the build.prop manually before installing the script? Because the script won't work in that case AFAIK.
Also have you tried on other ROM?
Sent from my DROID4 using xda app-developers app

nagim said:
There is a new safestrap version (you can find the thread in the development section), try to install the script after upgrading safestrap (you can find the instructions there). If that's not working, let Mentor know in the patch's thread.
Sent from my DROID4 using xda app-developers app
---------- Post added at 09:09 PM ---------- Previous post was at 09:05 PM ----------
One more thing: have you edited the build.prop manually before installing the script? Because the script won't work in that case AFAIK.
Also have you tried on other ROM?
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
No I didnt edited the build.prop I have no idea how to do that? Bought the phone rooted and now trying figure it out and make it work. Sorry for dum questions.
I have only the one rom installed with CM and second stock one and I didnt tried the stock one

tofmik said:
No I didnt edited the build.prop I have no idea how to do that? Bought the phone rooted and now trying figure it out and make it work. Sorry for dum questions.
I have only the one rom installed with CM and second stock one and I didnt tried the stock one
Click to expand...
Click to collapse
the patch will edit the build.prop. You followed? From the Install menu select the .zip file and install without signature verification on your Rom

sd_shadow said:
the patch will edit the build.prop. You followed? From the Install menu select the .zip file and install without signature verification on your Rom
Click to expand...
Click to collapse
How to install it without signature verification? After verification is always aborted. I couldnt find anything on internet. Thanx
Just it doesnt give me whats wrong. Only that instalation is aborded. Same with patch for google features

There is check box in safestrap.
Sent from my Amazon Kindle Fire using Tapatalk

sd_shadow said:
There is check box in safestrap.
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
Found it couple minutes ago. but still is aborded. so I guess I have to try to update safestrap? But the 3.7 is not stable yet right?

3.72 is the latest one and it contains mainly recovery related updates. I think it should work fine.
I only encountered your problem once. I wanted to install eclipse rom from Safestrap 3.65, but the rom's install script was not compatible. I had to revert to Safestrap 3.11.
Sent from my DROID4 using xda app-developers app

nagim said:
3.72 is the latest one and it contains mainly recovery related updates. I think it should work fine.
I only encountered your problem once. I wanted to install eclipse rom from Safestrap 3.65, but the rom's install script was not compatible. I had to revert to Safestrap 3.11.
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
so I upgrade it and have still the same problem :/

Any other option what try? I cant install any patch from recovery. Every patch I tried so far. For stock or for CM 10.2 it gets aborded without any Error

[Kernel] 4.4.2 d959 warning (super beta or not even a beta at all)

first of all this zimage hasn't been test!!!
i made this kernel with little knowledge following couple of tutorials and thanks to OhHeyItsLou !!
remember if you gonna try this kernel remember it has not been tested and til i figure it out it probably wont be tested for knob ppl.
If you are going to try it and or you are a DEV "which i think you might know how to work this out" "flashing" please be free to do.
once again i wont leave instructions on how to flash it because i havent figure out yet how to do it!!
THATS WHY I RATHER SEE A DEV USING THIS OR HELP ME WITH FLASHING THIS ON MY OWN DEVICE
Be free to contact me on any questions
flash it at you own risk ! Which we all know while flashing anything can go wrong!
unzip file and you would get the zImage.
V1 ! toolchain 4.6 from google
nothing special just a kk kernel hoping to help with cm11 ~!

Just tried flashing with TWRP on a rooted, stock 4.4.2 D959...flashing the zip failed, if that's any help :/

To make it usable we need to join with randisk and make a boot.iso
---------- Post added at 03:54 PM ---------- Previous post was at 03:50 PM ----------
Here http://androidforums.com/threads/how-to-build-kernel-zimage-into-boot-img.824521/
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
I'm at job then I can't do it now, just in a few days, somebody could do?
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
Then with this, we can use flashify to flash it

RyanGDI said:
Just tried flashing with TWRP on a rooted, stock 4.4.2 D959...flashing the zip failed, if that's any help :/
Click to expand...
Click to collapse
It won't flash in custom recovery because it's missing the "meta-inf" folder with the update-binary, etc. I'll try and write one tonight when I get home from work. Which will be around midnight central time.

I've got a meta-inf folder made and I've 're zipped it. Is this based on aosp or stock. Do I need to flash with my stock Rom or try with cm11

This die? Far as i can tell we need a kernel dev?

I downloaded zlmage_bumped.zip listed in first post and flashed it using flashify apk downloaded from Google play. Seems to have successfully flashed! My device is T-Mobile D959 running kit Kat 4.4.2 D95920h.

Did it really work?
Sorry i was out of the country and i worked on my desktop so obviously i couldnt take it with me .. Ill try and update the kernel as soonest i get sometime... I see we havent had luck with cm11 yet huh
Sent from my LG-D959 using XDA Free mobile app

I flashed it on d95920h, d95920m, and on CM11 and it failed / errored out each time. Never got it to take myself.... When I rebooted it came up with the security error on the lg screen... Had to boot recovery and restore my backup..... I should have pulled a logcat for ya but I was in a hurry and didn't have time.

@matildo.boss

I dont see any of my settings on there maybe you fkash with no luck of sticking the kernel to the rom
Sent from my LG-D959 using XDA Free mobile app

Dod you flash it with your script?
Sent from my LG-D959 using XDA Free mobile app

This would be epic!!!
Sent from my LG-D959 using XDA Free mobile app

maldito.boss said:
Dod you flash it with your script?
Sent from my LG-D959 using XDA Free mobile app
Click to expand...
Click to collapse
Yes I did flash with my zip. I even used flashify.

mattwheat said:
Yes I did flash with my zip. I even used flashify.
Click to expand...
Click to collapse
It did not stick ... My kernel had to said something like... V1malditoboss
Sent from my LG-D959 using XDA Free mobile app