Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
I've a problem with my S5830 connected to a headset.
When I connect a classic headphone (various expensive IEMs, with 3 tips plug), the Ace activates the internal mic.
During a call, I hear the other voice with good volume and quality, but my voice has poor quality, with noise/distortion and reverberation.
My impression is that the internal settings are wrong, assigning a lot of gain to the mic.
I've the S5830XWKT8 baseband with the SGSII JB 11.1 ROM.
In the Service Mode menu, the Audio option is "Blocked", so I can't tweak it.
I've tried with other baseband (S5830XXKPP) and ROM (stock, stock based and CM10 based) without a solution.
If I use the phone without headset or with a classic handsfree device (phone+mic+switch), my voice is clear.
So the phone and internal mic have no problem.
Any idea?
Hey guys,
I recently bought a Bluetooth headset and wanted it to use for phone calls. But the problem that occurs is that the microphone volume is way too low. The person on the other end can't understand me. If I use the phones microphone it's fine and I'm pretty sure that the headset is also working fine.
I've read about this problem for other devices but there is only a device specific solution.
Is it a problem of Cyanogenmod? I use version 11 and one of the latest nightlies.
Can I somehow configure the volume of the microphone or is there something like a boost?
I think it's a software and not hardware related issue, so maybe there is a solution.
Best reagards,
Kacha13
Yesterday I bought a Whitelabel AncStudio Bluetooth headset. But it only plays one ugly ringtone when someone is calling me.
So that's not what I expected. Is there a way to change this on Android? Especially the Z1? Because I read about that the transmitting is up to the phone.
And I also was wondering if it's possible to turn off the annoying blue LED in the headphone.
But I believe there is no way to get into the firmware of the headset, right?
I just recieved an email from their support. They say there's noting I can do and that's all.
Does no one here has any kind of idea how it could be possible to hack the firmware?
Hello,
i have the Xperia Z3compact for over One Year.
I'm on the road every day, so I use the Sennheiser Presence Bluetooth Headset for any call.
My only Problem is when calling; other's hear me to low! They have to increase their speakers to maximum and had problem to hear me. The Sound Quality is very good but they here me too low.
I have tested every Rom from (original) Android 4.4.4 over 5 Lollipop Versions (stock and rooted Rom's) and now on the newest Sony Android 6.0.1
-all with same bad results
When I'm calling with the Phone (without Headset) all here me perfect and loud.
But not with the BT Headset!
Then i have tested Cyanogenmod Cm12.x and wow the Problem with Bluetooth headset is completely gone
All here me loud and perfect!
But on CM the camera Quality is gone and I have the fisheye problem.
Now the big question:
why is the BT Headset outgoing mic volume louder than on any other Rom's?
And is there any option to increase the Bluetooth outgoing mic volume with a rooted (stock) Rom?
I know about the mixer_paths.xml file.. but no one ever, write here; How to tune the Bluetooth outgoing Mic volume!?!
All only tune the z3c inside mic's and speakers..
CM Mod is nice but buggy there is no stable Version and the cam quality is crap.
So please, if any one have a idea what I can try? to increase Bluetooth Mic Volume!
Help me!
Information:
The Problem is not my Hardware...
I have tested the Bluetooth Headset with other Smartphone without problems!
I have tested the Headset with another new Z3compact -same result other here me to low on BT Headset Calls.
So there is no Hardware defect.
PS: Sorry for my bad English.
Hope someone can help me
Alex from Germany