Related
So i wanted to do the BYOP with straight talk.. Went to the store got a BYOP Kit $59 and another 1 month $45 Card. Then (after checkin straight talk's MEID check on there site) Checked the MEID of the Samsung S3.. Went thru the activation process and it went thru fine.. Phone Didnt work. It was stock no root ect. Well... I suspected maybe there was a lost/stolen or past due so i called sprint and after 4 attempts and some social engineering that SWIM is not and is proud of was able to determine there is 249 balance and they wont release the phone .. The guy lied to me and said it was deavticated and free and clear. Great.
So yesterday I find a HTC one with a cracked screen but still works.. Great. I run the MEID thru straight talk and Sprint and its good and clear.. Awesome no past due's everything is ok.
Get home tried using the Tmobile Micro Sim and completed the activation process and it goes thru ok! (Dont you love how they make ya feel warm n fuzzy..) I go into the setting on the HTC one and change the mobile data between 4g lte Cdma to gsm and then do the root and sim unlock running viper and get the hidden menu and via *#*#4636#*#* and change the settings to WCDMA GSM ONLY Gsm Auto Prl.. And nothing..
Then spent 2 hours on the phone with Straight talk, got them to cancle out the Tmobile sim and Activated a Att Mirco Sim (They Said it would be better coverage ect) And still Notta.. I got a Htc One 32gb Boot Loader Unlocked (Presumably SIM Unlock) and Rooted and Would really like to get it working on Straigh talk.. I have seen a couple of people on here that have accomplised this But cant get a response from them how they did it.
I really need a working phone cause of the kids, ect. Does anyone have any ideas?
I also have seen how some of these knock off MVNO's say that a past due bal isnt a issue and they can flash a Sprint phone No Issue.. But seems like the S3 wont work unless someone knows of a sure fire place that can do it.
Or getting my HTC ONE to work on a Sprint MVNO but im assuming they will want a UICC# or Sprint 4g Mico Sim card number. And I dont know how to get one of those or who might have them.
Any one have any solutions how i can accomplish getting a working Phone preferably with 4g.. Id even trade these damn things out at this point. I would most likely like to get that HTC One on Sprint thats been unlocked to work with straight talk using its International Capabilities and the ATT Micro Sim that is now active and registered because i have 3 months paid thru them.. Any ideas?
Mortland said:
So i wanted to do the BYOP with straight talk.. Went to the store got a BYOP Kit $59 and another 1 month $45 Card. Then (after checkin straight talk's MEID check on there site) Checked the MEID of the Samsung S3.. Went thru the activation process and it went thru fine.. Phone Didnt work. It was stock no root ect. Well... I suspected maybe there was a lost/stolen or past due so i called sprint and after 4 attempts and some social engineering that SWIM is not and is proud of was able to determine there is 249 balance and they wont release the phone .. The guy lied to me and said it was deavticated and free and clear. Great.
So yesterday I find a HTC one with a cracked screen but still works.. Great. I run the MEID thru straight talk and Sprint and its good and clear.. Awesome no past due's everything is ok.
Get home tried using the Tmobile Micro Sim and completed the activation process and it goes thru ok! (Dont you love how they make ya feel warm n fuzzy..) I go into the setting on the HTC one and change the mobile data between 4g lte Cdma to gsm and then do the root and sim unlock running viper and get the hidden menu and via *#*#4636#*#* and change the settings to WCDMA GSM ONLY Gsm Auto Prl.. And nothing..
Then spent 2 hours on the phone with Straight talk, got them to cancle out the Tmobile sim and Activated a Att Mirco Sim (They Said it would be better coverage ect) And still Notta.. I got a Htc One 32gb Boot Loader Unlocked (Presumably SIM Unlock) and Rooted and Would really like to get it working on Straigh talk.. I have seen a couple of people on here that have accomplised this But cant get a response from them how they did it.
I really need a working phone cause of the kids, ect. Does anyone have any ideas?
I also have seen how some of these knock off MVNO's say that a past due bal isnt a issue and they can flash a Sprint phone No Issue.. But seems like the S3 wont work unless someone knows of a sure fire place that can do it.
Or getting my HTC ONE to work on a Sprint MVNO but im assuming they will want a UICC# or Sprint 4g Mico Sim card number. And I dont know how to get one of those or who might have them.
Any one have any solutions how i can accomplish getting a working Phone preferably with 4g.. Id even trade these damn things out at this point. I would most likely like to get that HTC One on Sprint thats been unlocked to work with straight talk using its International Capabilities and the ATT Micro Sim that is now active and registered because i have 3 months paid thru them.. Any ideas?
Click to expand...
Click to collapse
Always make sure you check the imei of all phones you purchase. You mine as well flash it to cricketr or page plus. Also you can get edge speed with AT&T gs3 on straight talk
I flashed a T-Mobile SM-N950U Firmware. The site says its from T-Mobile, I tried it from two websites and even from here.
But its giving me apps from Verizon, and my Notifications say something about Sprint OMADM but i used TMobile.
Network is ok 4G works, but this is really bothering me that i dont have the Tmobile stuff. The notification wont go away either.
Is there a way to fix this?
I tried the ones from Updado and Samobile.
Got it working. Didnt put in the CHC or userdata.
DellStock said:
I flashed a T-Mobile SM-N950U Firmware. The site says its from T-Mobile, I tried it from two websites and even from here.
But its giving me apps from Verizon, and my Notifications say something about Sprint OMADM but i used TMobile.
Network is ok 4G works, but this is really bothering me that i dont have the Tmobile stuff. The notification wont go away either.
Is there a way to fix this?
I tried the ones from Updado and Samobile.
Got it working. Didnt put in the CHC or userdata.
Click to expand...
Click to collapse
Make sure you're following the carrier switching guide. This will be a moot point once Oreo drops though. Oreo firmware automatically carrier switches based on the SIM card.
I bought my phone thru Verizon. Its unlocked out the box. How can I get rid of all the Verizon bloatware? The main thing is the Verizon loading screen when I turn the phone on and off. Is there a way to have it come on like the unlocked version u buy from Samsung?
Perseus83 said:
I bought my phone thru Verizon. Its unlocked out the box. How can I get rid of all the Verizon bloatware? The main thing is the Verizon loading screen when I turn the phone on and off. Is there a way to have it come on like the unlocked version u buy from Samsung?
Click to expand...
Click to collapse
One thread down. ? give that a shot and see if it works. Someone else has already done so I'm assuming it works. Before flashing, please remove your sim card, that way when the device reboots, it'll hopefully be kept from loading Verizon bloat registered via the simcard.
https://forum.xda-developers.com/galaxy-note-9/help/unlocked-firmware-t3830294
I appear to be in one of those samsung lock horror stories. I purchased a paid off verizon s21 ultra that was suppose to be unlocked but after i put my tmobile sim into it works for 5 minutes perfectly then an error pops up saying unable to change carrier call verizon customer support. So i did long story short i got no where. So i filed an FCC complaint and got in contact with a verizon executive and he got in contact with who i bought the phone from and they provided all the paperwork proving it was paid off and he reprocessed the unlock request and said it will now for sure be unlocked and it didnt unlock so i contacted samsung like he said for me to do if it didnt so i did and they told me to wait 48 hours for it to process. 48 hours later guess what its still not unlocked so i call samsung back and they said verizon still hasnt released it supposedly and there is nothing they can do and i need to go back to verizon. Im stuck in an endless loop of verizon executives telling me to call samsung and samsung telling me to call verizon.
What is there left for me to do now? This is stupid why is it not unlocking... The only thing that i can think is left is that the phone is flashed with stock firmware and not verizon firmware to remove the bloatware. But that seems like it shouldnt matter. Also the phone never asks for an unlock code it just says call verizon customer service.
It's more a Verizon lock horror, not Samsung.
Flashing other FW won't solve your issue.
OnnoJ said:
It's more a Verizon lock horror, not Samsung.
Flashing other FW won't solve your issue.
Click to expand...
Click to collapse
Any other tips you have?
Return to seller and demand refund...
DodgeTransmissionsGoBoom said:
I appear to be in one of those samsung lock horror stories. I purchased a paid off verizon s21 ultra that was suppose to be unlocked but after i put my tmobile sim into it works for 5 minutes perfectly then an error pops up saying unable to change carrier call verizon customer support. So i did long story short i got no where. So i filed an FCC complaint and got in contact with a verizon executive and he got in contact with who i bought the phone from and they provided all the paperwork proving it was paid off and he reprocessed the unlock request and said it will now for sure be unlocked and it didnt unlock so i contacted samsung like he said for me to do if it didnt so i did and they told me to wait 48 hours for it to process. 48 hours later guess what its still not unlocked so i call samsung back and they said verizon still hasnt released it supposedly and there is nothing they can do and i need to go back to verizon. Im stuck in an endless loop of verizon executives telling me to call samsung and samsung telling me to call verizon.
What is there left for me to do now? This is stupid why is it not unlocking... The only thing that i can think is left is that the phone is flashed with stock firmware and not verizon firmware to remove the bloatware. But that seems like it shouldnt matter. Also the phone never asks for an unlock code it just says call verizon customer service.
Click to expand...
Click to collapse
First, did you verify that the unit is paid off?
Second, do you know anyone that has verizon?
Don't know if it will work, but I would try flashing the unit back to stock Verizon firmware and finding someone who has a verizon sim card.
Verizon units kind of unlock on their own. It is troubleshooting I would try because I do not believe the unit will unlock on U1 software on its own. Once it can get unlocked then flash back.
I suggest someone who has a verizon active SIM as it may help in it unlocking even though you can connect through WIFI
yygemmi770 said:
First, did you verify that the unit is paid off?
Second, do you know anyone that has verizon?
Don't know if it will work, but I would try flashing the unit back to stock Verizon firmware and finding someone who has a verizon sim card.
Verizon units kind of unlock on their own. It is troubleshooting I would try because I do not believe the unit will unlock on U1 software on its own. Once it can get unlocked then flash back.
I suggest someone who has a verizon active SIM as it may help in it unlocking even though you can connect through WIFI
Click to expand...
Click to collapse
The verizon executative said it was guaranteed paid off and he unlocked it remotely again. But it does have u1 firmware on it im guessing i need to use frija and download the vzw firmware? And will another unlock request need to be processed again? And none of my friends have verizon due to how much of a ripoff they are lmao but i can have another verizon demo sim put in at another verizon store. I feel like i would have to file anpther fcc complaint just to talk to another verizon executive.
DodgeTransmissionsGoBoom said:
The verizon executative said it was guaranteed paid off and he unlocked it remotely again. But it does have u1 firmware on it im guessing i need to use frija and download the vzw firmware? And will another unlock request need to be processed again? And none of my friends have verizon due to how much of a ripoff they are lmao but i can have another verizon demo sim put in at another verizon store. I feel like i would have to file anpther fcc complaint just to talk to another verizon executive.
Click to expand...
Click to collapse
I believe for it to be unlocked or at least go through the process, the verizon U package is what I would flash, but you may be in a little bit of a issue if you don't have a verizon SIM on hand, even if not activated.
There are multiple ways to get it to flash back to U. I would use a patched ODIN and just flash the appropriate files from somewhere like samfw.com
If he sent out the remote unlock, it is very possible that once you flash back to U verizon package and connect to WIFI and go through the setup process etc. It may just unlock on its own. If you do not have a Verizon SIM card, leave your SIM out of the phone while going through the initial setup. You will need WIFI.
I would start with a clean flash just to be safe.
yygemmi770 said:
I believe for it to be unlocked or at least go through the process, the verizon U package is what I would flash, but you may be in a little bit of a issue if you don't have a verizon SIM on hand, even if not activated.
There are multiple ways to get it to flash back to U. I would use a patched ODIN and just flash the appropriate files from somewhere like samfw.com
If he sent out the remote unlock, it is very possible that once you flash back to U verizon package and connect to WIFI and go through the setup process etc. It may just unlock on its own. If you do not have a Verizon SIM card, leave your SIM out of the phone while going through the initial setup. You will need WIFI.
I would start with a clean flash just to be safe.
Click to expand...
Click to collapse
What's a patched Odin? I've only used regular Odin can you send a link to the patched one?
VERIZON FIRMWARE FLASHING UNLOCKED IT!!!!!!!!!!!!!!!!
DodgeTransmissionsGoBoom said:
VERIZON FIRMWARE FLASHING UNLOCKED IT!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
BAM!!!!! Glad it worked! I work with phones all day long and that was the protocol I would have used glad it worked out!
DodgeTransmissionsGoBoom said:
VERIZON FIRMWARE FLASHING UNLOCKED IT!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hello, I have encountered the same problem. Can you tell me the solution to this problem?
chen2luqi said:
Hello, I have encountered the same problem. Can you tell me the solution to this problem?
Click to expand...
Click to collapse
You literally quoted the answer
Verizon firmware has an app called "Network Unlock". Perhaps at the 60 day mark, the phone automatically unlocks. However, if on the unlocked U1 firmware, there is no framework to remove the lock. It'd be interesting to see exactly how the Verizon unlock process works.
Guyinlaca said:
Verizon firmware has an app called "Network Unlock". Perhaps at the 60 day mark, the phone automatically unlocks. However, if on the unlocked U1 firmware, there is no framework to remove the lock. It'd be interesting to see exactly how the Verizon unlock process works.
Click to expand...
Click to collapse
It is somehow tied into their U package software and I am assuming unlocks it at the modem level in background processes. It's like the "signal" they send out can only be detected on their U package. I've seen it many times where Verizon phones automatically unlock themselves when restored to original package from U1.
yygemmi770 said:
It is somehow tied into their U package software and I am assuming unlocks it at the modem level in background processes. It's like the "signal" they send out can only be detected on their U package. I've seen it many times where Verizon phones automatically unlock themselves when restored to original package from U1.
Click to expand...
Click to collapse
I can confirm this works on my s21+ that was on verizon network, and was supposedly networked unlocked. Service carrier software said vzw/vzw, vzw/vzw. Tried to switch to tmobile with no luck with sim card swap. 5 minutes, error message about cannot which carriers, please call Verizon. Was on SM-996U1. So I tried to flash to SM-996U1 TMB, then SM-996U1 VZW, then, SM-996U1 XAA. No luck. Then I flashed, hesitantly, with SM-996U VZW . I thought that would put all verizons bloatware on it. Reseted phone and it did put all verizon bloatware on it. Then the magic! I installed my new tmobile sim, and a message appeared and asked if I wished to switch carriers. YES!!! phone rebooted to tmobiles network with no verizon errors. I checked service carrier software and it was TMB/TMB, VZW/VZW. I flashed phone again to SM-996U1 XAA. I rebooted and service carrier software was TMB/TMB, TMB/VZW! I then checked for software update, took update, and all it good! Thanks for all the information here. Took me days to find it and understand it and try it!!
Hi, folks. I am facing the same issue with my S21 5G (SM-G991U). I am also told that the phone paid off and clean. I am not sure what version I am on currently. I have tried SamKey, but that didn't work. Any help would be appreciated. Thank you in advance.
hoorrus said:
Hi, folks. I am facing the same issue with my S21 5G (SM-G991U). I am also told that the phone paid off and clean. I am not sure what version I am on currently. I have tried SamKey, but that didn't work. Any help would be appreciated. Thank you in advance.
Click to expand...
Click to collapse
Does your device boot up Verizon and have all the Verizon apps?
bigkahuna7660 said:
I can confirm this works on my s21+ that was on verizon network, and was supposedly networked unlocked. Service carrier software said vzw/vzw, vzw/vzw. Tried to switch to tmobile with no luck with sim card swap. 5 minutes, error message about cannot which carriers, please call Verizon. Was on SM-996U1. So I tried to flash to SM-996U1 TMB, then SM-996U1 VZW, then, SM-996U1 XAA. No luck. Then I flashed, hesitantly, with SM-996U VZW . I thought that would put all verizons bloatware on it. Reseted phone and it did put all verizon bloatware on it. Then the magic! I installed my new tmobile sim, and a message appeared and asked if I wished to switch carriers. YES!!! phone rebooted to tmobiles network with no verizon errors. I checked service carrier software and it was TMB/TMB, VZW/VZW. I flashed phone again to SM-996U1 XAA. I rebooted and service carrier software was TMB/TMB, TMB/VZW! I then checked for software update, took update, and all it good! Thanks for all the information here. Took me days to find it and understand it and try it!!
Click to expand...
Click to collapse
From my experience, Verizon phones will not unlock unless on the U package, the U1 never allows the unlock to be processed.
yygemmi770 said:
Does your device boot up Verizon and have all the Verizon apps?
Click to expand...
Click to collapse
It does not boot up with Verizon but it does have a few Verizon apps included (it has Call Filter and Digital Secure) installed. The current version of the software is G991USQS6EWD5. Service provider version is SQOMC_SM-G991U_OYN_SPR_13_0020 SPR/SPR,SPR/VZW.
hoorrus said:
It does not boot up with Verizon but it does have a few Verizon apps included (it has Call Filter and Digital Secure) installed. The current version of the software is G991USQS6EWD5. Service provider version is SQOMC_SM-G991U_OYN_SPR_13_0020 SPR/SPR,SPR/VZW.
Click to expand...
Click to collapse
Are you using this phone with Verizon service? From info you provided, your phone thinks you are using Sprint. It's a SPR CSC. You need to change the CSC to VZW. You need to bring the phone back to it's original state for any attempt of the unlock "processing".
I recently bought an unlocked Galaxy S10 SM-G973U on Amazon. Got new SIM card from a Verizon MVNO and activated phone. The phone downloaded Android 12, One UI version 4.0. Firmware Build number SP1A210812.016.G973USQS6HVA1. Service provide Software version SAOMC_SM-G973U_OYN_SPR_12_0007 SPR/XAA/VZW. The problem is there is no menu option to activate/switch on VoLTE which means when I'm on a call there is no internet. I've talked to the MVNO tech support multiple times and was told they couldn't see any problems on their side, or that the SM-G973U does not support VoLTE which is not true. I found on one of AT&T's sites that the SM-G973U needs a software patch to enable VoLTE. I also found a couple of USSD codes but they either didn't work or didn't get me to the right setup screen to turn on VoLTE. I even stopped by a Samsung store and they weren't any help either. They said they could re-flash a stock firmware but it would revert to being locked to a carrier which is apparently also not true based on what I've read on this forum. Anyone know how I can turn on VoLTE or know of an apk file or software patch to enable VoLTE?? Does one of the firmware versions posted online have the patch to turn on VoLTE??
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Thanks. My carrier is Straight Talk which is now VZ. The SIM card they sent me has the wording "Verizon Compatible" written on it. I finally found a document that explains how to interpret the CSC codes and your explanation clarifies my understanding of it. Sound like I'll have to re-flash it. Since it was originally a VZW phone I'm thinking I should flash it back to VZW to see if that works before trying U1.
Dumb question as this is my first time flashing a phone. (I've flashed quite a few other things but never had to worry about CSC codes and bootloader versions, etc.) I don't see VZW firmware on samfirms or sammobile. I see Sprint, T-Mobile, and one listed as USA without carrier info but I don't see one for VZW. Can someone point me to the correct location to download SM-g973U and U1 firmware for VZW? Greatly appreciated and thanks for putting up with my lack of knowledge!
Edited: Found the files on sammobile. Will try the U1 (VZW) first. I'll keep my fingers crossed.
schwinn8 said:
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Click to expand...
Click to collapse
Success! Was able to flash U1. VoLTE is now working. The CSC now shows TFN/TFN/VZW. Much appreciated!!!
Awesome, glad to hear that fixed it easily!
And TFN... I'm a fan there, too!
Hi! I'm having a similar issue with the same model and happy to see someone was able to enable VoLTE. However, most of what you said above is a foreign language to me. Would one of you be willing to give me a crash course in what you did?
Here's my specific situation. Last week (~1/4/23) Tracfone shutdown 3G. My Samsung Galaxy S10 (SM-G973U) says my network is set to LTE/3G/2G. I've read LTE is 4G, but still can't make or receive calls/texts, but data and 911 calls still work. Their tech support is no help.
From reading online it sounds like I may need VoLTE, not just LTE. Hence finding this thread. If one of you would be willing to spare some time to walk me through what you did I'd really appreciate it. In the mean time I'll try to figure out what "flashing" mean in a context that doesn't involve showing body parts
Thank you in advance!!
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
schwinn8 said:
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
Click to expand...
Click to collapse
Thanks for replying! I'm not entirely sure if VoLTE has worked previously. I bought this phone 6/2021 and have only haver had tracfone service for it. I did find in my setting that VoLTE calling is set to on so it seems like it should work. Of note, the 4Glte in my status bar has always been grayed out (I went back and looked at some old screenshots).
My current CSC is VZW/XAA/ATT.
I spoke with tracfone customer service yesterday and they had me reset my network setting and now I don't even have data and the 4Glte in my status bar that was previously gray has now completely disappeared.
Their customer service refuses to talk to me now (literally no one answers when it transfers to an agent) or they hang up on me, and no I haven't been rude, but I have told them I'm recording the call.
I bought a mint mobile package last night because I'm beyond frustrated with Tracfone. I'm worried I'll have the same problems with Mint. I'm not sure if my settings are screwed up or if it's just Tracfone. In any case things are worse now after talking to customer service yesterday.
I also notice there was no APN setting on my phone so I updated it today and restarted but no difference.
Thanks for any input!! Much appreciated. Sorry for the novel.
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
schwinn8 said:
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
Click to expand...
Click to collapse
OK some of that was still over my head. I'll see what happens with the Mint Sim... one f/u question now though. You said the ATT means my phone was "born" ATT. I bought my phone off backmarket and it was sold as "unlocked". Was that not true? How can I be sure in the future if I buy a used phone that's not from my carrier that it will actually be compatible?
Unlocked just means it's not locked to a carrier. That is true in your case, otherwise you wouldn't have been able to install ANY non-ATT SIM. So, you did the right thing to get an unlocked phone, and that is what you got.
The issue with compatibility is just the asshole carriers spreading lies. They do this to try to get people to buy THEIR phones, for no reason other than to make money and confuse consumers. The "born" CSC has no bearing on anything, really... neither does the carrier-specified IMEI. In your case, the XAA is good, which means it's a multi-carrier ROM, which works with all USA carriers.
Mint is a good idea - being an ATT carrier (IIRC), that should work and they should help you get it up and running even if they have to activate it. Good luck!
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Goldie8709 said:
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Click to expand...
Click to collapse
UPDATE: Switching to Mint worked like a charm! Once my number ported and I put the new SIM card in, service was instantaneous! I've had Mint for 3 weeks now and the service is so much better than with Tracfone! My calls go through nearly as soon as I hit call, the internet is faster.
I didn't need to do a thing either. No making APN settings, etc. I'm betting it has to do with what you said about my phone being born ATT. So funny because the software(?) is Verizon - shows the Verizon when I restart/power up. I still love my bastard phone
So thankful I didn't buy a different phone!!! Again thanks for all your help @schwinn8
Thanks for reporting back and letting us all know, and I'm glad it worked out well!
Yeah, the carriers pull this nonsense all the time... it's BS. The phones are all the same, only the ROM changes. If we can change ROMs (which we can) then there should be no reason to force users to specific IMEIs. But we know why they do this - follow the money. I encourage people to write to the FTC and FCC about this (I have).