Hi Friends, I have Droid 3 verizon global, touch screen works well till screen lock happens after that I am unable to unlock the touch screen fails to respond then I have to pull battery out then turn on again after screen lock touch not working. When display is turned off then this issues occurs (during call, screen lock etc.) please help me to fix this issue.
Related
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
I'm running the latest:
CM7 - RC1
Radio-5.12.00.08
The issue is every time the screen times out. - Lock button, while in a phone call when the proximity senor activates, or just a regular screen time out.
The weird part is when it's locked and I press the lock button to turn on the screen the screen doesn't turn on, but the touch sensors still work(I can unlock the phone by feeling for the unlock tab) & the buttons light up. The phone doesn't freeze up. Also, the screen has no color issue; I tested the multi-touch with the dev tools in CM7 and it's 100% functional.
I've tried wiping everything and reflashing with both Clock Work Mod Recovery & Amon_RA's.
I would kindly appreciate help in anyway.
I just got this Nexus one with an unlocked bootloader running CM5. (lol I know) My cousin is trying to sell it to me and left it to me so I can fix the issue. If I can't I suppose I won't buy it.
I have this issue where when I unlock my screen, the touch screen is unresponsive with finger input. S-pen works fine, and all other buttons (volume, home, back, recent apps) works fine too. Just the finger touch stops working.
This issue happens when I unlock my screen 3rd or 4th time. In other words, if I unlock my phone first two times, it works fine but on 3rd or 4th time it will give me this issue. I have to lock and unlock the phone again with power button in order to get it working again.
Interestingly, this issue only happens when I don't have any screen lock setup. If I have any PIN, pattern lock or even swipe to unlock setup, the issue doesnt happen. I suspect that there is some bug with Firmware where it is waiting for the unlock to happen even when no screen lock is setup.
Anyone experiencing the same issue? Any solution for this?
Hello, for some time I have a problem with unlocking the phone after pressing the button to turn on the phone, the screen does not light up every time the fingerprint sensor does not appear on the screen, face unlock also does not work. the unlocking sound is heard but the screen stays black, the phone also began to heat around the bixby button. The phone is on the original rom and was purchased in the USA and im from Poland . I can't go into recovery because the screen is also black I did hard reset from settings nothing help. If anyone has any idea what I can do, please help.
Hello guys, I'm having some problems with the screen of my device, when I press the button to turn off the screen, and I try to turn on the screen again, it hardly turns on at first, I have to make several attempts for it to turn on, or restart the cell phone for it to work. I used a screen recorder, and apparently when I click, the system works normally, but the screen doesn't care about me. When I receive calls the same situation occurs, the screen goes black during the call, and after ending the call, I can't turn on the screen easily, I have to make several attempts or restart the phone for the screen to turn on. I am currently at Havoc OS 4.3, but this problem persists with me since Stock (Oxygen OS). I've already changed the screen, touch screen display, and device buttons, but the problem continues. The solution I found to facilitate my daily life is to use an application called Blackr to keep the device always on on a black screen, simulating a lock screen, thus trying to reduce my battery consumption because the screen is amoled. So I decided to come here on the forum to ask the noble colleagues for help to see if I can find a solution to my problem. I thank you for your attention!