hey guys...
recently i had some problems with my device and i had to change chip of my internal memory.
after that they have installed 4.0.3 Rom with N7000XLPT kernel. as usual i tried to install JB 4.1.2 Samsung's official Rom with odin, installation passed, everything seemed to be ok, but when booting, it looped on samsung logo over and over.
i had to install 4.0.3 oncce again. so does anyone know what is the problem?
Wipe Your data before flashing update.
Sent from note, a phone like never before
Related
I really need urgent help. I have recently ( 2 days back) purchased Galaxy note GT- N7000. I tried rooting the note using CWM. I was able to complete it.
I have used CWM, CWM Recovery and flashed kernel with franklin latest version. I have tried all these as 4G T-Mobile data not working. Now after all these phone getting hung very frequently and getting restarted.
please direct me to correct thread to reset everything back to original factory setup. I tries using factory setup , wipe cache etc. but kernel and CWM recover not getting uninstalled.
Please help me with instructions to reset my phone back to original settings.
rammohan223 said:
I really need urgent help. I have recently ( 2 days back) purchased Galaxy note GT- N7000. I tried rooting the note using CWM. I was able to complete it.
I have used CWM, CWM Recovery and flashed kernel with franklin latest version. I have tried all these as 4G T-Mobile data not working. Now after all these phone getting hung very frequently and getting restarted.
please direct me to correct thread to reset everything back to original factory setup. I tries using factory setup , wipe cache etc. but kernel and CWM recover not getting uninstalled.
Please help me with instructions to reset my phone back to original settings.
Click to expand...
Click to collapse
try to remove your sd card to see if it stops hanging/rebooting. If it does, remove any app that you could have installed in the sd card. Then in your pc format the sd card.
CWM won´t dissapear until you flash the stock kernel since the kernel you flashed has it.
So try to flash the stock kernel for your rom with pc odin, or just reflash a stock rom.
Just flash a different kernel......and everything will be back to normal...frnks latest version is a bit buggy....try speedmod...and flash kernels only on custom roms...not stock roms...
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Is your phone rooted? Do you have cwm?
Sent from my GT-I9000 using xda app-developers app
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Hmm... Which firmware u flashed?
If my post helped, don't mind hitting THANKS
you have to flash a the JVU. are you sur you didn't flash the JW4 !!
Freszone said:
Hi. My last firmware was from late 2010 (it was a custom if it matters).
Now I decided to update to 4.0.4 and selected a CM9 firmware. I did as usually, made a backup, factory resetted and cleared cache.
Then after I updated to that new firmware my phone got stuck in the first boot screen where it says like "Samsung GT-I9000" etc.
I wasn't able to get to recovery mode but I managed to get to download mode and I flashed a 2.3.6 firmware which I believe was stock (got it from sammobile.com). However it didn't help as now I'm stuck in endless boot animation where the "S" flashes and sometimes it just starts the animation again but nothing else happens .
I tried installing another kernel, then installing the CM9 firmware but then it just boots endlessly to recovery mode.
Now I have the stock 2.3.6 firmware installed with nothing else, still can't get past the boot animation. Anyone could tell me what to do or is my phone a brick?
Click to expand...
Click to collapse
Firstly I don't think its bricked if you can access download and recovery mode ....
I recently did the following to fix everything wrong with my phone.
I flashed to a stock rom (gingerbread 2.3.3)using Odin, then rooted my phone again. Then I flashed darky's rom (GB 2.3.6). After that i flashed tiramislim 9 (ICS 4.0.4) & that worked out for me. Hope i helped.
Hey. So, i decided to change ROM of my phone. I rooted my phone and installed clockworkmod recovery.
Now, i download multiple ROM's but no one was booting. I have tried all known fixes but still nothing
I'am using Linux OS, so i can't do many things at all. Also my phone is randomly restarting every now and then.
Any help would be appreciated. Thanks!
http://gb.youtube.video4me.net/user.../Root Galaxy S i9000 and install a custom rom
http://gb.youtube.video4me.net/user/Puggered UK/play/1RoZU5ZPMS4/Fix bricked Samsung Galaxy S i9000
http://gb.youtube.video4me.net/user... Galaxy S i9000 Revert back to your stock rom
hope these help you good luck
Hello everyone.
I just got my dad's old Galaxy not n7000. It had android ICS 4.0.3 on it.
I wanted to install a custom rom, so i rooted and installed one, but it got stuck on boot loop, though i followed all steps properly.
I restored back to the stock 4.0.3 using odin. After restoring, the lock screen would not show, nor would it detect my sim card. i couldn't fix it in the phone options. I googled the problem and it told me to check my imei. My phone didn't have one. I decided to try and install another custom rom, but it didn't work, went into bootloop again. I tried another, same thing. So i decided i would just update my phone to the official 4.1.2 update released in UK using odin.
but again went into bootloop. i restored it to 4.0.3 and it worked. However, when i went into recovery while in 4.1.2, a red error showed saying :failed to mount /efs.
Something is seriously wrong and i need help.
Thanks in advance.
Also I should note that, couple of years ago, there was an official update released by samsung, but that too made the phone go into a boot loop. we had to recover it using odin.
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
sunnynanade said:
Please help me in Installing Android 5.0 Lollipop on Samsung Galaxy GT-S6012.
Any other latest working Version of Android that i can install ??
Am willing to root my phone.
Please help.
And thanks a ton for your help !!!
Click to expand...
Click to collapse
Hello. I'm sorry but actually there's no lollipop for our device, however there is cm 11 with kitkat 4.4.4 but it isn't 100% stable. There's also cm 10.1, the android version maybe be a little old but it's more stable.
To flash this roms, you need this CWM
And for rooting, I think the easiest way is using Cydia Impactor
Boot loop..
Hi. I got a Samsung GT-S6012 that keeps rebooting the Samsung logo and doesn't start. At first I got the phone stuck on the very first logo with Samsung model name. So I did some search. Downloaded Odin and latest 4.1.2 official firmware for that phone model flashed it. Everything worked for a few days but then the battery ran out and phone shut down and when I turned it on again it got stuck on the very first logo and nothing. Then I flashed the same firmware again to get it running and when I checked it the flashing didn't really fully wiped the internal memory cause the data in it was still in tact. So I thought I need full wipe to fix the phone. So installed custom recovery, rooted it and flashed CM 10.1 on it. It was running very smooth everything seemed okay but I wanted the stock rom. So I went to recovery wiped whatever was possible and flashed the stock firmware in download mode again. And now I got stuck on the second Samsung logo and it keeps rebooting it self. I recognize that I cannot wipe data/factory reset and wipe cache in now stock recovery cause it gives me android logo within it a red flag. The wipe cache supposed to fix boot loop problem but it's not an option for me anymore. All I can do now is just enter Download mode. I'm downloading 4.0.4 firmware and gonna try to flash that one see if it works but I doubt. Can anyone suggest me a way to fix it? Please I'm really desperate.