Database Develop

[Q] No Rom and RUU not working

My terminology will probably be off or just plain wrong. Sorry but I am doing my best to give as much info as possible and appreciate the help.
I have a Sprint HTC One (US). I recently tried to put a new rom on my phone and messed up somewhere along the way. I think I wiped where I was loading the rom from :silly:. I now have no rom installed and my computer is not able to connect to or see the phone. When I try and use adb and run the "detect devices" command it comes back with nothing. So then I tried running the RUU for my phone and in versions 1.29.651.10, 1.29.615.7, and 1.29.615.6 I have received error code 155 in all of them. I read that means I need the boot loader to be locked but cannot find a way to do that if the adb is not detecting my phone.
I am able to get into TWRP v2.6.1.0. If I do not hold down the volume down key while trying to boot it will sit on the HTC logo screen.
At the top of the boot loader I have:
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-1.00.20.0626
OpenDSP-v31.120.274.0617
eMMC-boot
Jul 5 2013, 17:19:22:15705
I just want to be able to put the stock rom back on the phone. Any help?

Checkered Spheres said:
My terminology will probably be off or just plain wrong. Sorry but I am doing my best to give as much info as possible and appreciate the help.
I have a Sprint HTC One (US). I recently tried to put a new rom on my phone and messed up somewhere along the way. I think I wiped where I was loading the rom from :silly:. I now have no rom installed and my computer is not able to connect to or see the phone. When I try and use adb and run the "detect devices" command it comes back with nothing. So then I tried running the RUU for my phone and in versions 1.29.651.10, 1.29.615.7, and 1.29.615.6 I have received error code 155 in all of them. I read that means I need the boot loader to be locked but cannot find a way to do that if the adb is not detecting my phone.
I am able to get into TWRP v2.6.1.0. If I do not hold down the volume down key while trying to boot it will sit on the HTC logo screen.
At the top of the boot loader I have:
***TAMPERED***
***UNLOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-1.00.20.0626
OpenDSP-v31.120.274.0617
eMMC-boot
Jul 5 2013, 17:19:22:15705
I just want to be able to put the stock rom back on the phone. Any help?
Click to expand...
Click to collapse
Make sure the rom you tried to flash was sprint compatible. Might be your issue. Boot your phone in bootloader mode, select fastboot then connect usb cable to computer. Open a cmd prompt from your adb/fastboot folder and type this command:
Code:
fastboot getvar all
copy/paste output here but remove IMEI and SN
also ADB only works when phone is booted to OS or RECOVERY
FASTBOOT works when phone is in bootloader mode.
so the command to relock the bootloader is
Code:
fastboot oem lock
don't lock the bootloader yet, want to be sure if the ruu match your getvar info.

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4030mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 5.564s

Checkered Spheres said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4030mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 5.564s
Click to expand...
Click to collapse
You need s-off to use these ruu because its a version downgrade (from 1.31.651.2 ----> 1.29.651.7)
So you need to s-off with revone tool before using ruu. don't forget you have a sprint version and you can't use some stuff here. You must make sure you always download srpint compatible rom and recovery (M7_WLS)

alray said:
You need s-off to use these ruu because its a version downgrade (from 1.31.651.2 ----> 1.29.651.7)
So you need to s-off with revone tool before using ruu. don't forget you have a sprint version and you can't use some stuff here. You must make sure you always download srpint compatible rom and recovery (M7_WLS)
Click to expand...
Click to collapse
So what would the order of operations be? Relock boot loader, s-off, then ruu?
Is there any problem that when I type "adb devices" it returns with nothing? I know it was able to pull the info for the getvar but am unsure how that is possible.

Checkered Spheres said:
So what would the order of operations be? Relock boot loader, s-off, then ruu?
Is there any problem that when I type "adb devices" it returns with nothing? I know it was able to pull the info for the getvar but am unsure how that is possible.
Click to expand...
Click to collapse
don't relock bootloader! Flash a sprint compatible rom, then s-off with revone. when you have s-off, remove tempered flag from bootloader and set it to ''locked'' not ''relocked'' and then flash the ruu.
btw adb commands like ''adb devices'' will only work when OS is booted or in custom recovery, not in bootloader.

[Q] [Solved]HTC One Re-locked and S-ON

I'm trying to find some solution for me since yesterday with no joy...So I think that I'm one the most stupid or the most unlucky guy in the world.
My cousin bought one HTC M7 which was running Cyanogenmod, and he wanna go back to Android. As I had done already some flashings, a long time ago back to the HTC Diamonds, I stood up to help him.
I was following one guide which didn't mention the S-ON/S-OFF, and I just read about that after relocking the bootloader. Now, the phone is relocked and won't boot up the Cyanogen, and I can't unlock it in fastboot because it's S-ON! So, the only hope for my, as I understood, is that I need one RUU signed (because it's locked) and versioned above my current version (because it's S-ON). And there's my last problem: the CID is H3G_001 with version 3.62.771.3, I can't find any RUU above this one!!! :crying:
Is there any hope for me? Anywhere I could download the RUU or anyhow to unlock/change to S-OFF?
Here is my fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.771.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3725mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1a757b8b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.113s
Thanks.

adtcarv said:
I'm trying to find some solution for me since yesterday with no joy...So I think that I'm one the most stupid or the most unlucky guy in the world.
My cousin bought one HTC M7 which was running Cyanogenmod, and he wanna go back to Android. As I had done already some flashings, a long time ago back to the HTC Diamonds, I stood up to help him.
I was following one guide which didn't mention the S-ON/S-OFF, and I just read about that after relocking the bootloader. Now, the phone is relocked and won't boot up the Cyanogen, and I can't unlock it in fastboot because it's S-ON! So, the only hope for my, as I understood, is that I need one RUU signed (because it's locked) and versioned above my current version (because it's S-ON). And there's my last problem: the CID is H3G_001 with version 3.62.771.3, I can't find any RUU above this one!!! :crying:
Is there any hope for me? Anywhere I could download the RUU or anyhow to unlock/change to S-OFF?
Here is my fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.771.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3725mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1a757b8b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.113s
Thanks.
Click to expand...
Click to collapse
s-on has nothing to do with unlocking the bootloader. All phones come locked and s-on
just go to HTCDEV and get a new unlock token
---------- Post added at 07:05 PM ---------- Previous post was at 07:00 PM ----------
Try these instructions I posted for someone yesterday
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.4
http://techerrata.com/browse/twrp2/m7ul
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot

Once your unlocked, flash recovery TWRP 2.6.3.3 then flash this...
http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
Sent from my HTC One using XDA Premium 4 mobile app

clsA said:
s-on has nothing to do with unlocking the bootloader. All phones come locked and s-on
just go to HTCDEV and get a new unlock token
---------- Post added at 07:05 PM ---------- Previous post was at 07:00 PM ----------
Try these instructions I posted for someone yesterday
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.4
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
Wow! We get some progress! The phone is finally unlocked, thank you very much! :highfive::highfive:
But when I'm trying to sideload it, won't work. If I try TWRP / Advanced / ADB Sideload, it returns:
Code:
ADB Sideload Complete
Failed
[CODE]
Updating partition details....
Full SELinux support is present
[/CODE]
And when I try from PC: adb sideload ROM.zip, it returns "error" device not found". What am I missing?
Thanks

bored_stupid said:
Once your unlocked, flash recovery TWRP 2.6.3.3 then flash this...
htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried without success...when I choose Install and tap the Guru file, it says Failed... =(

Worked!!!
Hey guys, thank you very much!!!
In TWRP I cleaned all data, and tried again with Guru.zip, and that worked! I have now the system working! Thank so much guys!
Now, do I have to rename the thread to solved?
Really thank you guys! :fingers-crossed::fingers-crossed::highfive::fingers-crossed:

Good deal
Sent from my HTC One_M8 using Tapatalk

adtcarv said:
Hey guys, thank you very much!!!
In TWRP I cleaned all data, and tried again with Guru.zip, and that worked! I have now the system working! Thank so much guys!
Now, do I have to rename the thread to solved?
Really thank you guys! :fingers-crossed::fingers-crossed::highfive::fingers-crossed:
Click to expand...
Click to collapse
Press the THANKS button for the guys that helped
It's a nice way to show you appreciated their help.

I have an unlocked tampered bootloader, s-on, twrp installed and working (unrooted because su will not flash successfully) and no working OS. I have a usb otg flash drive working with the ruu and I can access it without any problem. Before I flash it, if I understand correctly, I'll need to relock my bootloader, right? How can I relock it with s-on? is there a way or should I go another route. I just want to get back to any working rom right now. I really don't care if it is rooted unrooted locked or not. just working. any help greatly appreciated.
SPRINT HTC ONE M7

cityneversleepz said:
I have an unlocked tampered bootloader, s-on, twrp installed and working (unrooted because su will not flash successfully) and no working OS. I have a usb otg flash drive working with the ruu and I can access it without any problem. Before I flash it, if I understand correctly, I'll need to relock my bootloader, right? How can I relock it with s-on? is there a way or should I go another route. I just want to get back to any working rom right now. I really don't care if it is rooted unrooted locked or not. just working. any help greatly appreciated.
SPRINT HTC ONE M7
Click to expand...
Click to collapse
You can lock it in bootloader/FASTBOOT USB with the following command:
Code:
[B][I]fastboot oem lock[/I][/B]

majmoz said:
You can lock it in bootloader/FASTBOOT USB with the following command:
Code:
[B][I]fastboot oem lock[/I][/B]
Click to expand...
Click to collapse
Thanks majmoz. That worked. Now I have tampered relocked s-on. I'm going to attempt to return to stock. I'll let you know how it turns out. and will hit the thanks button.
---------- Post added at 06:18 PM ---------- Previous post was at 05:20 PM ----------
majmoz said:
You can lock it in bootloader/FASTBOOT USB with the following command:
Code:
[B][I]fastboot oem lock[/I][/B]
Click to expand...
Click to collapse
majmoz, yeah that worked but now I am not sure if I should have locked it. I can't get to recovery anymore. just have a working bootloader and that is it. the bootloader is Tampered, Relocked S-on. Do you know if I can still install an ruu via fastboot and/or adb? Or is this the end of the road

cityneversleepz said:
Thanks majmoz. That worked. Now I have tampered relocked s-on. I'm going to attempt to return to stock. I'll let you know how it turns out. and will hit the thanks button.
---------- Post added at 06:18 PM ---------- Previous post was at 05:20 PM ----------
majmoz, yeah that worked but now I am not sure if I should have locked it. I can't get to recovery anymore. just have a working bootloader and that is it. the bootloader is Tampered, Relocked S-on. Do you know if I can still install an ruu via fastboot and/or adb? Or is this the end of the road
Click to expand...
Click to collapse
You can install a RUU.zip via fastboot. Just place it in your fastboot/adb folder and rename to ruu.zip.
Code:
[B][I]adb reboot bootloader[/I][/B]
After that, type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip ruu.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip ruu.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot[/I][/B]
Click to expand...
Click to collapse

majmoz said:
You can lock it in bootloader/FASTBOOT USB with the following command:
Code:
[B][I]fastboot oem lock[/I][/B]
Click to expand...
Click to collapse
I'm out of the woods. After relocking with the direction I received here, I was able to fastboot ruu. Back up and running. Great community.

cityneversleepz said:
I'm out of the woods. After relocking with the direction I received here, I was able to fastboot ruu. Back up and running. Great community.
Click to expand...
Click to collapse
What does it say in bootloader (relocked, tampered...?).
I bought a used M7 with warranty, of course it has pink tint on pictures, and sadly in bootloader it says relocked So probably no warranty... or can I get it back to locked?
It's S-ON

kbal said:
What does it say in bootloader (relocked, tampered...?).
I bought a used M7 with warranty, of course it has pink tint on pictures, and sadly in bootloader it says relocked So probably no warranty... or can I get it back to locked?
It's S-ON
Click to expand...
Click to collapse
with S-ON, you can only get it to say RELOCKED at best. if you want to fully return to 100% out of the box you need S-Off
depending on what firmware/hboot/variant you have:
revone
rumrunner
firewater
sunshine ($25)

C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35xxxxx
(bootloader) imei: 354xxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So?

kbal said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
So?
Click to expand...
Click to collapse
you can forget revone, moonshine, and rumrunner
you could try firewater, but I doubt it'll work (i could be wrong), but if you are willing to pay the devs $25, then I would recommend sunshine... it should work without any problems
after S-OFF, it'll be pretty easy to get you 100% out of the box

Testing with FireWater, a lot of empty bottles so far
---------- Post added at 10:29 PM ---------- Previous post was at 10:14 PM ----------
Now I have tampered too, can I at least get rid of that without S-OFF?

kbal said:
Testing with FireWater, a lot of empty bottles so far /QUOTE]
I kinda mentioned that.
kbal said:
Now I have tampered too, can I at least get rid of that without S-OFF?
Click to expand...
Click to collapse
if you can get back 100% stock ROM + 100% stock firmware (includes stock recovery, etc), then tampered **should** go away
Click to expand...
Click to collapse

nkk71 said:
kbal said:
Testing with FireWater, a lot of empty bottles so far /QUOTE]
I kinda mentioned that.
if you can get back 100% stock ROM + 100% stock firmware (includes stock recovery, etc), then tampered **should** go away
Click to expand...
Click to collapse
If that doesn't work, while still rooted do the following (I can't remember where I go this from though so I apologize to the source for not linking). Ensure of course that you have root before this and have adb setup correctly and connected to the phone with debugging enabled:
Code:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
Now you can confirm the removal of the TAMPERED status.
Mine is quite fun now... My device is rooted and s-off but with no TAMPERED sign :angel:
Click to expand...
Click to collapse

Soft-brick. Need help!

So I had my m7 running fine, rooted and running a custom ROM. I got the M8 and so I wanted to return it to stock so I could sell it. Im now regretting that because I can't get it to do anything now. I've reflashed various ROMs (stock and custom Sense ROMs) without any success. For awhile I could get the stock rom (or what i believe was stock) to boot but the touch screen wouldn't work so it was worthless. Now I only get it to set on the HTC logo with the white background. I've left it for over 30 minutes and nothing happens. I'm a semi-noob but this one has be stumped. Any help is greatly appreciated.
Here is what my bootloader looks like:
Tampered
Relocked
M7_WLS PVT SHIP S-On RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OpenDSP-v31.120.274.0617
eMMC-boot 2048MB
Oct 1 2013

biged87 said:
So I had my m7 running fine, rooted and running a custom ROM. I got the M8 and so I wanted to return it to stock so I could sell it. Im now regretting that because I can't get it to do anything now. I've reflashed various ROMs (stock and custom Sense ROMs) without any success. For awhile I could get the stock rom (or what i believe was stock) to boot but the touch screen wouldn't work so it was worthless. Now I only get it to set on the HTC logo with the white background. I've left it for over 30 minutes and nothing happens. I'm a semi-noob but this one has be stumped. Any help is greatly appreciated.
Here is what my bootloader looks like:
Tampered
Relocked
M7_WLS PVT SHIP S-On RH
HBOOT-1.55.0000
RADIO-1.00.20.0913_3
OpenDSP-v31.120.274.0617
eMMC-boot 2048MB
Oct 1 2013
Click to expand...
Click to collapse
Your phone is the (M7_WLS CDMA) Sprint variant. You are not posting in the right forum, so I guess you are flashing roms/recoveries for the wrong variant (M7_UL GSM)

alray said:
Your phone is the (M7_WLS CDMA) Sprint variant. You are not posting in the right forum, so I guess you are flashing roms/recoveries for the wrong variant (M7_UL GSM)
Click to expand...
Click to collapse
i am using the Sprint variant recovery and the roms have been for Sprint. i posted in this forum because i thought it was the right place to ask for help. what forum do you recommend?
Thanks!

biged87 said:
i am using the Sprint variant recovery and the roms have been for Sprint. i posted in this forum because i thought it was the right place to ask for help. what forum do you recommend?
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-htc-one/help
What rom version and what is your recovery version?
can you post a complete "fastboot getvar all" except the imei, meid and serialno

alray said:
http://forum.xda-developers.com/sprint-htc-one/help
What rom version and what is your recovery version?
can you post a complete "fastboot getvar all" except the imei, meid and serialno
Click to expand...
Click to collapse
Here is what I have from Get Var. I am thinking i need to update my hboot to 1.56 so I use OMJ's RUU ( http://forum.xda-developers.com/showthread.php?t=2658910 ). I try it now and it crashes at 4%.
C:\adbtools\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.0913_3
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4294mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-005bf6a40e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
C:\adbtools\sdk\platform-tools>

biged87 said:
Here is what I have from Get Var. I am thinking i need to update my hboot to 1.56 so I use OMJ's RUU ( http://forum.xda-developers.com/showthread.php?t=2658910 ). I try it now and it crashes at 4%.
C:\adbtools\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.0913_3
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4294mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-005bf6a40e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
C:\adbtools\sdk\platform-tools>
Click to expand...
Click to collapse
if your phone is s-on make sure to use the encrypted/signed version , not the decrypted one. bootloader must be locked or re-locked.

alray said:
if your phone is s-on make sure to use the encrypted/signed version , not the decrypted one. bootloader must be locked or re-locked.
Click to expand...
Click to collapse
Yeah i'm using the encrypted one as far as i can tell (Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip)
I am also relocked as you can see in the GET VAR screen. Maybe it has something to do with recovery or hboot. I don't know.

biged87 said:
I am also relocked as you can see in the GET VAR screen.
Click to expand...
Click to collapse
no, locked/unlocked/relocked status is not included in a getvar, its only displayed on the bootloader screen

alray said:
no, locked/unlocked/relocked status is not included in a getvar, its only displayed on the bootloader screen
Click to expand...
Click to collapse
You're right, my bad. It is in the OP though and is relocked. Thanks!

Might have made it worse.
I figured i should update my hboot from 1.55 to 1.56. So here is my current booloader screen.
Tampered
Relocked
M7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
Radio-1.00.20.0913_3
OpenDSP-v31.120.274.0617
OS- 4.06.651.4
The OS line is new... I tried to then flash the Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip ROM using OMJ's instructions and it just crashes at 4% and says Error 155: UNKNOWN ERROR, like before. I appreciate any help.

biged87 said:
Might have made it worse.
I figured i should update my hboot from 1.55 to 1.56. So here is my current booloader screen.
Tampered
Relocked
M7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
Radio-1.00.20.0913_3
OpenDSP-v31.120.274.0617
OS- (4.06.51.40)
That OS line is in Red and wan't there before. I tried to then flash the Sprint_HTC_One_m7wls_4.06.651.4_RUU.zip ROM using OMJ's instructions and it just crashes at 4% like before. I appreciate any help.
Click to expand...
Click to collapse
did you download the firmware file and flash it twice ?

Seanie280672 said:
did you download the firmware file and flash it twice ?
Click to expand...
Click to collapse
Yes. typed the flash command twice.
Technically the very first time i only did it once and then i watched the video and saw him do it twice. so yeah i did it twice.

biged87 said:
Yes. typed the flash command twice.
Technically the very first time i only did it once and then i watched the video and saw him do it twice. so yeah i did it twice.
Click to expand...
Click to collapse
so you got the successful message at the end, then reboot your phone to fastboot USB mode and run the ruu

Seanie280672 said:
so you got the successful message at the end, then reboot your phone to fastboot mode and run the ruu, does it give you an error code when it fails ?
Click to expand...
Click to collapse
Yes i ran the reboot command and it went to the htc screen and i powered it down and went back into fastboot-usb and ran the RUU. It stops at 4% and says Error 155 (unknown). Im using Windows 7. Thanks for your continued help.

biged87 said:
Yes i ran the reboot command and it went to the htc screen and i powered it down and went back into fastboot-usb and ran the RUU. It stops at 4% and says Error 155 (unknown). Im using Windows 7. Thanks for your continued help.
Click to expand...
Click to collapse
well this is what the error means:
--------------------------------------------------------------------------------
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
PLEASE READ PAGE 5 AND 6 FROM THE THREAD YOU LINKED WHERE YOU ARE GETTING THE FILES FROM.

[Q] NOOB Help - RECOVERY SIDELOAD Works, BOOTLoader FASTBOOT does not

I am stuck on trying to get my phone back to stock.
In doing so, I am sure I have made it worse! I still have bootloader which I "RELOCKED" so I could load stock ROM. S-OFF. I was on HBOOT 1.56 and down-graded to HBOOT 1.44.
Now I am at a loss as a NOOB!
I can sideload a ROM, but am guessing I need stock ZIP (decrypted)? I can only "SEE" device to sideload. Nothing else seems to work!
I don't care if it's AT&T stock or T-Mobile, but I am trying to get back to Factory. Can anyone HELP or point me in right direction? I am lost! :crying:
(I am sure I have spent 20+ hours trying to read/fix! my BRICK!)
I am running ClockMod v6.0.4.3
*** RELOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-T-MOBO10
HBOOT-1.44.0000
RADIO-4T.28.3218.04
OpenDSP-v32.120.274.0909
eMMC boot
Apr 12 2013,12:10:45:-1

free_loaderz said:
I am stuck on trying to get my phone back to stock.
In doing so, I am sure I have made it worse! I still have bootloader which I "RELOCKED" so I could load stock ROM. S-OFF. I was on HBOOT 1.56 and down-graded to HBOOT 1.44.
Now I am at a loss as a NOOB!
I can sideload a ROM, but am guessing I need stock ZIP (decrypted)? I can only "SEE" device to sideload. Nothing else seems to work!
I don't care if it's AT&T stock or T-Mobile, but I am trying to get back to Factory. Can anyone HELP or point me in right direction? I am lost! :crying:
(I am sure I have spent 20+ hours trying to read/fix! my BRICK!)
I am running ClockMod v6.0.4.3
*** RELOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-T-MOBO10
HBOOT-1.44.0000
RADIO-4T.28.3218.04
OpenDSP-v32.120.274.0909
eMMC boot
Apr 12 2013,12:10:45:-1
Click to expand...
Click to collapse
1) i'm assuming you have
modelid: PN0713000
cidnum: T-MOB010
(ie US T-Mobile M7_UL)
next time post a "fastboot getvar all" (excluding IMEI and s/n), which would provide much more info than the bootloader screen.
so you can use this RUU:
http://dl3.htc.com/application/RUU_...6_10.33Q.1718.01L_release_421697_signed_2.exe
2) you dont need a LOCKED/RELOCKED bootloader when you are S-OFF
3) your recovery is way outdated if you want to flash newer ROMs (TWRP is usually the favourite) http://techerrata.com/browse/twrp2/m7
4) are you running Windows 8/8.1 it's known to have issues with hboot 1.44, check http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
lemme know if you need anything else, cause not entirely sure what your ultimate goal is

Can't get ROM to load.
Thanks for the INFO.
I tried that ROM and it fails. I am not sure what this phone had originally because I bought it used of EBay. I am trying to get back to "STOCK" so I can send in to HTC for camera repair.
TIA in advance! Here is info from GETVAR:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3750mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.120s
nkk71 said:
1) i'm assuming you have
modelid: PN0713000
cidnum: T-MOB010
(ie US T-Mobile M7_UL)
next time post a "fastboot getvar all" (excluding IMEI and s/n), which would provide much more info than the bootloader screen.
so you can use this RUU:
http://dl3.htc.com/application/RUU_...6_10.33Q.1718.01L_release_421697_signed_2.exe
2) you dont need a LOCKED/RELOCKED bootloader when you are S-OFF
3) your recovery is way outdated if you want to flash newer ROMs (TWRP is usually the favourite) http://techerrata.com/browse/twrp2/m7
4) are you running Windows 8/8.1 it's known to have issues with hboot 1.44, check http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
lemme know if you need anything else, cause not entirely sure what your ultimate goal is
Click to expand...
Click to collapse

version-main empty Cant flash the RUU file

Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
And it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-

amir_khan007 said:
Hello Guys
i have a problem with my
HTC One M7 AT&T
MID: PN0712000
CID: CWS__001
cant get it back to stock. showing error that it is not the right RUU file
i am trying to flash this one RUU_M7_UL_JB_50_Cingular_US_1.26.502.15_Radio_4A.17.3250.20_10.40.1150.04_release_326691_signed_2_2
plz help me.....!
and it also show version-main empty
Only showing this display
***TAMPERED***
***RELOCKED***
*** Security warning***
m7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4m.27.3218.14
OpenDSP-v32.120.274.0909
OS-
Click to expand...
Click to collapse
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here

alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
will it still flash with version-main empty?
I am a noob at these things so kindly help me!!

You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W902272
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
These are my Getvar all Details...

amir_khan007 said:
will it still flash with version-main empty?
Click to expand...
Click to collapse
Yes
teetx said:
You could to try flash 1.44 HBOOT, then give it a try (not to try a RUU flash, but back to stock, update everything and then try to RUU if needed)
Click to expand...
Click to collapse
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.

alray said:
Yes
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_Radio_4M.32.3218.06_10.46.1718.01L_release_449059_signed_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
 @Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse

alray said:
Yes
You can't downgrade the hboot with S-ON and you don't want to downgrade it if flashing a 7.xx.xxx.x RUU, you need at least hboot 1.57.
Click to expand...
Click to collapse
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
 @Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!

amir_khan007 said:
i downloaded the file (RUU_M7_UL_L50_SENSE60_MR_Cingular_US_7.23.502.4_R adio_4M.32.3218.06_10.46.1718.01L_release_449059_s igned_2) and ran it as administrator.But it is showing the error :
Error Code: -5001 : 0x80070002
Error Information:
>SetupNew\setup.cpp (142)
PAPP:
PVENDOR:
PGUID:
$
@Windows 7 / Server 2008 R2 Service Pack 0 (7600)
IE Version: 9.10.9200.16420
cant understand anything plz help..!!!!
Click to expand...
Click to collapse
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window

mb_guy said:
These errors don't look right at all. Did you read the "How to flash" instructions on the link @alray gave you.
Also be sure to use an admin cmd window
Click to expand...
Click to collapse
'How to flash' in the link is for zip RUU. my one is EXE file...!
PLZ TELL ME HOW TO GET RID OF THIS ERROR....!!

Try with another computer, looks like a Windows problem not related to the ruu itself. Do you have the latest C++ redistr installed on your computer?

alray said:
Hboot 1.57 suggest a 6.xx.502.x version, you can't flash a 1.xx.502.x RUU, its a downgrade. Dowgrading requires S-OFF. Use a 6 or 7.xx.502.x RUU.
7.23.502.1 and 7.23.502.4 here
Click to expand...
Click to collapse
OH MY GOODNESS
ITS DONE
ITS BACK
I CANT BELIEVE IT
@alray I dont know how to thank you. but I will pray to GOD to give you all the heavens HE made.................!!!
Amen
thanks buddy
thank you really very much....!!