So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
leo10messi said:
So I was on cm10.2 . Today i just wanted to use some stock experience for sometime as my exams are near so i wanted a stable rom.
So i tried to restore the Nand Backup from CWM. Restore was successful , Phone Boots everything is fine till that. After i enter to the setup wizard(Coz i wiped the data before making the backup) this error : Unfortunately the process com.google.gapps has stopped.
If i skip this then Setup Wizard Force Closes and then am not able to access anything on the phone. Everything seems to be force closing randomly?
Any Solution?
Click to expand...
Click to collapse
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Im having a similar issue
Hi! the same is happening to me, but im sure i flashed the right gapps from cwm. also, i tryed to restore a previous back up, the restore seems succesfull but when i boot i still see the setup wizard, even when i flash the right gapps after restore. I tryed cleaning caché, doing a factory reset. I dont know what else to do. The last thing i was doing with my working phone was trying (but i uninstalled it after a while) swapper2. but i letft my sd card only with fat32 as in the begining.
shut_down said:
You have CM10.2 GAPPS (4.3) on 4.1.2 system. That is the problem. You should wipe system and preload partition before you did restore. Try it now again. Do wipes and restore backup again. Gapps are not in data paritition.
Click to expand...
Click to collapse
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
leo10messi said:
It didnt help....still got the same error. If i skip it...setupwizard also force clolses? :/
Click to expand...
Click to collapse
Try to install gapps for 4.1.2 JB.
shut_down said:
Try to install gapps for 4.1.2 JB.
Click to expand...
Click to collapse
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
leo10messi said:
But I backed up the stock ROM ... why should we restore flash gapps 4.1.2?
Click to expand...
Click to collapse
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
P.S. Solution for someone was to flash some custom ROM. Try with that.
Sent from my GT-I9070 using Tapatalk
shut_down said:
I know I had similiar problems when I was going from CM to stock. I can't remember what exacly I did to solve it. I will look on some posts I wrote before. You have problems with gapps, that ia why it force close.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Ok mate let me know if you find the solution Thanks
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
jazzh said:
At least you have stock backup in cwm. I created mine in twrp, therefore I cannot go back at all now with cwm restore...
Click to expand...
Click to collapse
Put CoCore with TWRP on SD and install it from CWM.
I had same problem. I never use GAPPS, so I have not flashed the zip. Still I encountered this strange problem.
I found two possible methods which may help.
To restore 'stock JB backup' you must flash CM 10.1(4.2.2) or CM 10(4.1) and make sure you wipe data,cache and dalvik-c before and after flashing.
The from CM 10.1/10 recovery restore the stock JB backup.
If that did not work, the use ODIN to flash the stock JB firmware and then flash custom recovery. With this recovery you can restore either data or all of the partitions. GOOD LUCK
shut_down said:
Put CoCore with TWRP on SD and install it from CWM.
Click to expand...
Click to collapse
And what will I get, permanent twrp ? If yes, then that's it.
jazzh said:
And what will I get, permanent twrp ? If yes, then that's it.
Click to expand...
Click to collapse
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Yes, we do not have temp TWRP.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
can i restore my cwm backups from TWRP?
---------- Post added at 08:19 PM ---------- Previous post was at 08:12 PM ----------
well... after installing cocore with TWRP and then flashing gapps 4.1.2 from there, the problem persist. As i said before, after flashing stock rom from odin, then gapps from any recovery, the problem persist. wt* am i doing wrong!?
let me remember you, I am not who started this thread, but i have a similar issue.
Thanks
Edit: in order to bring you clues in case you may help me. I noticed that the keyboard doesnt show up if i try to write the password of the wi-fi network in setup wizard, also gapps still crashing as soon the phone boots and setup wizard after i try to skip it.
later edit: HEY HEY HEY! i noticed in "show log" option in cwm that after restoring the backup there are two issues:
I: Can't format unknow volume: /external_sd
I: Can't partition unsafe device: /dev/block/mmcblk0p8
hmmm... i didn't expect that.
keep updating: both cyanogen 10.0 and 10.2 don't even boot. they stay stucked in the pretty loading screen.
didn't find anything helpfull to do from recovery or odin
any clue?
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
alete89 said:
just for the record (if anyone came here looking for an answer) i did a downgrade to 2.3.6 with this guide: (it is in spanish, but provides all the files and im sure you can find one in your language)
grupoandroid . com/topic/67294-gbguia-downgrade-de-jb-a-gb/ (delete spaces)
now i will upgrade to JB again, i hope that without problems.
edit: FUUUUUUUUUUUUUUUUUUU!
after 2.3.6 working without issues, flashed 4.1.2 from sammobile with odin (the same .md5 that i had for months!) and the problem came again. gapps error, and couldnt finish the setup wizard....
Click to expand...
Click to collapse
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
shut_down said:
Ok, try to install some ROM now. I remember that someone solved with that. But manual mount system and preload partitions just in case.
I had similar problems after coming back from CM10 before.
If that do not help, (have CWM or TWRP) put some ROM zip on SD - wipe ALL (cache, dalvik cache, system, preload, factory reset) and install ROM again.
Click to expand...
Click to collapse
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
alete89 said:
I couldn't install CM10 or 10.2 from CWM after wiping cache, dalvik, system, preload, and factory. I got
"getprop(ro.build.product) = i9070, getprop(ro.product.device) = GT-I9070
error or something like that and i get stucked.
I'll downgrade again and keep it for one day until the night, i can't be without my phone one more day.
Click to expand...
Click to collapse
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
shut_down said:
Wait, do you have I9070P? That error is shown if you try to install CM on I9070P.
Click to expand...
Click to collapse
nono, i have I9070. 100% sure.
Related
Hey guys! First of all-sorry for being one of those people who post a question on thier first post.
I've been happily using TEAMHACKSUNG's ICS Build 15 for a couple of months with zero problem.
Restarted the phone a few hours ago in Recovery mode and cleared Cache+Dlavik Cache and after that, the phone couldn't boot. The Samsung screen shows first, then the CYANOGEN MOD screen, and Smasung again..in a loop.
Tried getting to Recovery mode, and nothing...same problem..
Download mode worked.
Please help me fix this situation. Hopfully without a full system wipe...\=
Thanks in advance! [=
Please help....I'm smartphone-less \=
Try flashing the rom again
rajhot said:
Try flashing the rom again
Click to expand...
Click to collapse
I've flashed the stock CM7 Kernel and know I can get to recovery.
unfortunately, I don't have the rom's zip file on the internal card to flash it. I've managed to put the rom on the external sd card, but as it seems, there is no way to flash it through the external card.
I did a backup of my system thru CWM [don't have another one]. Thought of maybe flashing stock GB in odin, then CM7, then Teamhacksung's build 15, and then restore the backup I've just did.
Will it work or maybe there's a better idea?
Thanks!
Flash stock rom via Odin and the vf root
Sent from my GT-I9000 using XDA App
I've flashed CM9 build 15 through all the instructions, with a couple of wipes in between...
Then, restored the nandroid backup and when all done-a weird colorful stripes appeared and nothing. So I installed Build 15 again and the phone booted!
Only problem now is for some reason, Messages aren't working, aswell as Facebook. And all my contacts gone [not a problem, but still-they were supposed to restore after the nandroid..]
Did I do something wrong? Can I fix the messages problem somehow?
Thanks in advance!
Darkanus said:
I've flashed CM9 build 15 through all the instructions, with a couple of wipes in between...
Then, restored the nandroid backup and when all done-a weird colorful stripes appeared and nothing. So I installed Build 15 again and the phone booted!
Only problem now is for some reason, Messages aren't working, aswell as Facebook. And all my contacts gone [not a problem, but still-they were supposed to restore after the nandroid..]
Did I do something wrong? Can I fix the messages problem somehow?
Thanks in advance!
Click to expand...
Click to collapse
I had something like that once, i wiped factory+cache+dalvik recovered the nandroid backup and then reflashed the ICS build i wanted and it work alright...
every thing without leaving the recovery mode...
sounds long and annoying but it could work for you too...
Dude, download it http://ics.samsung-updates.com/trouble/FixRecovery.tar.md5 and flash it via odin at PDA , than go to recovery snd flash kernel again. And remember if u making a wipe at ics base rom, flash again kernel, its normal..
Sent from my GT-I9000 using Tapatalk
Bump...that's correct..try the suggestion in the previous post and that should work
Dfolt said:
Dude, download it [UR and flash it via odin at PDA , than go to recovery snd flash kernel again. And remember if u making a wipe at ics base rom, flash again kernel, its normal..
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I've already managed to restore my rom with the nandroid backup. It's the messages that aren't working...
Well, I think I'll backup all of my stuff and try the Onecosmics rom...
Thank you all for your help! [[[=
Hey,
I have been using CM10 Paranoid Android since it came out on the Note, I am on 2.51 version.
Yesterday my SD Card wouldn't mount so I rebooted the phone, after the reboot it got stuck on the animation (Jelly Bean Android). So I rebooted it again and this time it booted, but every application was 'Not Responding' I couldn't even get to the lock screen.
Ever since then I can't boot it up it stays on the Jelly Bean Man animation. Keep in mind I didn't install any apps, I didn't update the Rom since it came out ( a few months ), it just randomly stopped working.
I am wondering what to do.
Thank you.
Start with cleaning cache and dalvik cache in your recovery.
ThaiDai said:
Start with cleaning cache and dalvik cache in your recovery.
Click to expand...
Click to collapse
Did that, still no success.
mikus123 said:
Did that, still no success.
Click to expand...
Click to collapse
If you have a backup of your Rom (made in recovery) and/or backups of your Apps (made with Titanium Backup):
Factory reset and reinstall this Rom or install another (JB stock) Rom.
If you do not have backups:
Factory reset and reinstall this Rom or install another (JB stock) Rom.
And be sorry, that you didn't make backups.
ThaiDai said:
If you have a backup of your Rom (made in recovery) and/or backups of your Apps (made with Titanium Backup):
Factory reset and reinstall this Rom or install another (JB stock) Rom.
If you do not have backups:
Factory reset and reinstall this Rom or install another (JB stock) Rom.
And be sorry, that you didn't make backups.
Click to expand...
Click to collapse
Do you have any idea what happened? It was so spontaneous. I have a back up of the ROM, however it was before I installed APPS, and TB didn't work on my phone so I could never back them up.
So factory reset is the only way?
mikus123 said:
Do you have any idea what happened? It was so spontaneous. I have a back up of the ROM, however it was before I installed APPS, and TB didn't work on my phone so I could never back them up.
So factory reset is the only way?
Click to expand...
Click to collapse
If TB never worked there was already something wrong with your configuration.
No, I don't have an idea what could be wrong - only hoping that it isn't a hardware problem.
Yes, that's why I would install a stock JB rom with PC Odin first: if this succeeds you'll have working configuration again - if if fails we can analyze the errors in PC Odin.
Received this phone a month ago, just got around to rooting it yesterday. Root with motochopper went fine. Unlocked the handset with motopocalypse, everything went fine. Installed latest CM10.2 nightly and everything ran fine, even restarted phone and it worked fine. I then realized I forgot to install Gapps, So i went to CWM and installed the Gapps through "install zip from sd card". Now phone will not progress past the bootloader unlocked warning screen. I can restart and put phone into recovery or fastboot no problem but I don't know where to go from here. I tried a factory reset and reinstallation of CM but to no success. I am a bit of a newb when it comes to external programs like RSD Lite and haven't used it. Is there something obvious I'm missing in my progress of trying to fix my phone?
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
i can't post outside links yet but on the wiki.cyanogen site in the Gapps section I used the 10.2 20130813 1f51b5cc6370c1f45dc951109b6ce6ed release. I will attempt those steps once i can find a legitimate charger in my house. Phone doesn't accept power unless its on and i need just a bit of juice to boot it up
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
Here's the official name. Installed cm-10.2-2-130814-NIGHTLY-mb886.zip for the cm and gapps-jb-20130813-signed.zip for the GApps, both latest versions I believe
frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
yodelyfish said:
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
Click to expand...
Click to collapse
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
frog1982 said:
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
Click to expand...
Click to collapse
i got Cyanogen up and working. And no I was not flashing gaps Before first boot. i will try doing that before everything else
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
yodelyfish said:
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
Click to expand...
Click to collapse
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.[/Q]
Awesome. Pac-Rom already looks better on review. I get to the dl page tho and have a monster list of choices. Which one do I go for?
Click to expand...
Click to collapse
frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
Click to expand...
Click to collapse
Thank you for all the help. PACROM is up and running swimmingly, all of the features are there and it is definitely better than CM by itself. Thanks again
I was surprised that after flashing stock ROM by ODIN, phone was not cleaned from the user data.
I mean: account settings, applications installed by user, etc.
I know that flashing dont erase data from internal/external SD card, but why all data was still exist?
Only Wipe Data / Factory Reset will erase all user data?
Btw, Merry Xmas
darcik said:
I was surprised that after flashing stock ROM by ODIN, phone was not cleaned from the user data.
I mean: account settings, applications installed by user, etc.
I know that flashing dont erase data from internal/external SD card, but why all data was still exist?
Only Wipe Data / Factory Reset will erase all user data?
Btw, Merry Xmas
Click to expand...
Click to collapse
Nope, factory reset will not erase all user data. Go into setting/storage and delete from there (not sure cause I didn't have the device now). If you want to erase using odin, tick the repartition box while flashing the firmware. This is the easiest way I think.
Odin flash doesn't wipe user apps and their data, but it may cause bugs if you come from another ROM...
E.g : if u soft bricked on stock JB, just odin flash is necessary.
for other ROMs, it may or may not lag.
I will describe my way.
I tried to install CM 10.2
I did factory reset, next steps follow procedure.
When I did first start, unfortunately keyboard stop working, so my cyjanogen install failed and I decided back to old system using backup.
After restore and start, phone required settings like on first start after factory reset.
Lol, big surprise.
Ok, I entered necessary information but after reset -
again same like after factory reset
I tried from another backup with same result.
Hmm, big mess.
So I flash stock ROM by Odin.
And new surprise - phone with fresh system and all my own settings and applications from last restore.
Two disappointments:
1. Restore from backup does not cause a return to the initial state.
2. Flash ROM by Odin don't make factory state of phone.
I have question, if format partitions: system and data and next restore backup will do real state phone on this backup?
GT-I9070 ==> Tapatalk space
darcik said:
I will describe my way.
I tried to install CM 10.2
I did factory reset, next steps follow procedure.
When I did first start, unfortunately keyboard stop working, so my cyjanogen install failed and I decided back to old system using backup.
After restore and start, phone required settings like on first start after factory reset.
Lol, big surprise.
Ok, I entered necessary information but after reset -
again same like after factory reset
I tried from another backup with same result.
Hmm, big mess.
So I flash stock ROM by Odin.
And new surprise - phone with fresh system and all my own settings and applications from last restore.
Two disappointments:
1. Restore from backup does not cause a return to the initial state.
2. Flash ROM by Odin don't make factory state of phone.
I have question, if format partitions: system and data and next restore backup will do real state phone on this backup?
GT-I9070 ==> Tapatalk space
Click to expand...
Click to collapse
1. Almost every restore from backup for me it returned phone on state when backup was made. Only if my backup was bad (did not have enough place on sd for backup or something corrupted it).
2. Flashing stock ROM by Odin do not touch data partition (or folder whatever it is). So if you want to erase that, you need to make factory reset. It is like that on every Samsung Android device - I am not sure for other, never used.
When you come back from any CM10.2, Omni 4.3 and CM11 based ROM - first flash stock with Odin, do factory reset - and after that restore backup (ofcourse first root, install CoCore kernel for CWM before restore - you can't use restore in stock recovery).
Tnx for answers.
This is weird that format system partition not enough to get rid of the CM
But I checked this again and exactly after refresh ROM by Odin - restore my settings and data works fine.
Hmm imo this is mess in whole Android system
darcik said:
Tnx for answers.
This is weird that format system partition not enough to get rid of the CM
But I checked this again and exactly after refresh ROM by Odin - restore my settings and data works fine.
Hmm imo this is mess in whole Android system
Click to expand...
Click to collapse
Explanation for that, TeamJanica used preload partition for swap, and it is patitioned in other format than the one stock ROM use. That partition is not used on CM for files, but it has it's use on stock based ROM.
shut_down said:
Explanation for that, TeamJanica used preload partition for swap, and it is patitioned in other format than the one stock ROM use. That partition is not used on CM for files, but it has it's use on stock based ROM.
Click to expand...
Click to collapse
Tnx for explanation :good:
Is there somewhere a description of the organization of the file system, partitions in our device?
darcik said:
Tnx for explanation :good:
Is there somewhere a description of the organization of the file system, partitions in our device?
Click to expand...
Click to collapse
I think there is in some of the first posts of developer thread. I will try to find it and post if I get it.
Maybe this http://forum.xda-developers.com/showpost.php?p=30694671&postcount=288
shut_down said:
I think there is in some of the first posts of developer thread. I will try to find it and post if I get it.
Maybe this http://forum.xda-developers.com/showpost.php?p=30694671&postcount=288
Click to expand...
Click to collapse
Tnx, as usual you are very helpfull
How I missed this topic?
darcik said:
Tnx, as usual you are very helpfull
How I missed this topic?
Click to expand...
Click to collapse
It is made 25th August 2012. Maybe because of that.
Heeeelp pleeeease
Ive got a problem with frp protection my daughter forgot everything so i restored to factory and used odin 3 v13.3 and correct firmware to flash it but when odin says pass the phone erases itself of the flashed firmware it’s a galaxy s7 edge any help would be grateful im pulling my hair out now .
j7 nxt stock frimware flash failed
i accidentally wiped vendor,syastem and all and now i can only install custom gsi roms.
While flashing stock frimware it stuck at set partition adn cannot install stock frimware please helpe to get this fixed?
gauravsapkotanp said:
j7 nxt stock frimware flash failed
i accidentally wiped vendor,syastem and all and now i can only install custom gsi roms.
While flashing stock frimware it stuck at set partition adn cannot install stock frimware please helpe to get this fixed?
Click to expand...
Click to collapse
supposedly you have downloaded the stock FW, flash via Odin with re-partition ticked. if it fails, extract the PIT file from CSC_OMC_OXM_XXX save it in a location and load it at the pit session via Odin the re-flash again with re-partition ticked.
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
PhurionN said:
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
Click to expand...
Click to collapse
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
BRKsays said:
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
Click to expand...
Click to collapse
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
PhurionN said:
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
Click to expand...
Click to collapse
i am having a similar problem .....i cant install any rom other than ultimatum
Magpir said:
i am having a similar problem .....i cant install any rom other than ultimatum
Click to expand...
Click to collapse
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
PhurionN said:
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
Click to expand...
Click to collapse
details please .....
Magpir said:
details please .....
Click to expand...
Click to collapse
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
PhurionN said:
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
Click to expand...
Click to collapse
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Magpir said:
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Click to expand...
Click to collapse
flash a stock firmware via odin then flash a custon rom after rooting and installing cwm, here is a tutorial, I hope this help you: http://forum.xda-developers.com/showthread.php?t=1034145